Lost connection between airport time capsule and extreme, can't get extreme back in network, says connection excellent
I have 2 terabyte Time capsule, last gen, not newest. I have a similar airport extreme to extend my network. I was running Lion. I upgraded to Maverick to see if it would fix this problem, and it did not. When using airport utility, latest version, it says that the extreme has an excellent connection, but fails to extend the network. This started the last time I upgraded Lion. I have tried rebooting, renaming the extreme to no avail. I moved it to the same room as the time capsule, no luck.
Hello Thomas,
You may want to try performing a factory reset on the AirPort Extreme.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
http://support.apple.com/kb/HT4259
Cheers,
Allen
Similar Messages
-
I have "lost" the time machine disk on my time capsule. How can I get it back?
I went to restore a Word document from January 2010. When I went into Time Machine to restore it, I found that the current backups only go back to May 2013. I've had the Time Capsule at least a couple of years longer than that. I tried going into Time Machine to select disk, and ended up deleting the existing disk and being offered a new one.
However, I know that the old backups (from May 2013 onwards, anyway) are still there. How can I reconnect to them via Time Machine?It was the alt key that did it
Interesting, since it is the control key that works on my Mac....not option or alt.
Unfortunately, if you cannot select the disk in Time Machine Preferences as a Time Machine backup destination, you will have to go with what you have.
If it were me, I would probably erase the Time Capsule disk and simply start over again with a new backup set. -
What is the maximum distance between a time capsule and an airport express?
What is the maximum distance between a time capsule and an airport express?
You can only "extend" the signal one time, so you need to have the AirPort Express located approximately 1/2 to 2/3 of the distance from the Time Capsule to the area that needs more wireless coverage.
I doubt that this will help much since you have a very challenging setup. Wireless is really only for "same room" or "nearby rooms" around the corner.
To do this correctly you will need to use an Ethernet cable connection from the Time Capsule to the AirPort Express, which could then be located close to the xBox.
If it is not possible to run the Ethernet cable, you might look at a pair of Ethernet powerline adapters to send a "psuedo" Ethernet signal over the AC wiring in your home.
This will not be anywhere near the performance of a regular Ethernet cable, but it will likely be much better than wireless.
Since Ethernet over powerline (EOP) is somewhat unpredictable, you would want to have a very clear understanding of the store's return policy in case things don't work out as hoped. Any computer / electronics superstore will have a selection of powerline adapters to choose from. -
I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?
Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility. -
I have just bought an airport time capsule and i am trying to install an airport utility programme to support this
However, it seems the version 6 which came out last year - i can't use on my Mac - Snow Leopard -
So tried to then install version 5.6.1 and although this installed properly, it says this will not support my capsule
2. I have BT home hub 2. I presume I cannot bypass this as the internet router? I bought the time capsule for its capability to back up . The router was a byproduct. But am I correct in thinking that it acts as a secondary router or a booster rather than a primary router . I still need the BT homehub?
if anyone can help that would be great
CS JYou should either return the Time Capsule or upgrade your Mac at least to OS X 10.7.
-
I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets
I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets
-
What type of modem do i need for time capsule. I can't get it to pick up the net
what type of modem do i need for time capsule. I can't get it to pick up the net
Simply bridge the TC..
With DSL you need to either bridge the modem and use PPPoE client which can be difficult to setup.. especially as some modems do not bridge readily..
Or bridge the TC which is simple.. go to the airport utility and select internet page, on v5 utility or network page on v6 utility and select off-bridged mode for the mode of connection. -
I recently got a replacement iPhone and when syncing it I found I lost all my downloaded music in my iPod, can I get it back?
I lost all content on my ipod after connecting it to a new computer. I had brought my iTunes library over from the old computer and had the most recent iTunes installed, but iTunes didn't see the ipod. Long & short of it is I worked with Apple support, finally was able to restore the ipod and everything looked like it was syncing normally. When I ejected the ipod there was no content on it at all. After trying several times unsuccessfully to get it reloaded and another session with Apple support, they suggested the ipod was damaged. Since it was working fine up till that point I doubted that. I then thought it might be the iTunes library that was corrupt so I checked that. (It's fine.) So I found an ipod repair place (authorized Apple dealer) and when I called them they found that it appears to be an issue with iTunes software itself and pretty much said I have to wait for an update to fix the issue. So I did everything you're supposed to do & it messed up my ipod. Now iTunes doesn't recognize thje ipod again!
-
I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!
you launch QT then go to its REGISTRATION
-
Ive just updated my iPhone4 to the IOS5 software and i have lost all my apps? why? and how can i get them back?
When an iPhone updates, it wipes the whole device clean and then reinstalls the software and then the backup. Obviously you didn't create/couldn't create a backup either via iCloud or iTunes. You can get your apps back when you go to App Store>Updates>Purchased and download the apps you want.
-
I just backed my iPhone up and now I have lost all of my recent info. How can I get it back to how it used to be
Did you fail to import your photos before updating? If so, then they are likely gone. You can try restoring from backup. If that fails then they are gone. You should regularly import photos to your computer, most especially before any update.
Did you fail to transfer any purchases on iphone ( that were not on your computer) to your computer before updating? If so, then you will have to redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
My iPod touch got stuck on fast forward on the sound and I can't get it back to normal. How do I restore normal speed sound?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have used my force9 emails for a few years with now problem on my laptop and also for maybee 6 months on my iphone4s but after syncing with itunes on my laptop i have lost all the emails & email setting of my phone.
I also back up on icloud and tried looking on there on my laptop but there is only my icloud emails and not my pop3 force9 emails . There are all my contacts there butwhy does it wipe my emails and settings and how can i get them back.
many thanks
monoboardRestore your backup.
-
My Canvas and Timeline are gone and I can't get them back
Hey everyone.
I've been using a new HD camera and i have had to change a billion settings on FCP. Now that I am no longer using HD it was time to go back to the way they were, but I must have done something wrong. My canvas and timeline are gone and I can't get them back. I tried going to window and just pulling them up but I can't click on the canvas and timeline buttons...
Please help!!! I am fairly new at final cut pro and I need help. I have a film festival deadline approaching and only hope that some kind person out there can help!!Trash your FCP preferences. This will reset FCP to it's defaults.
Close Final Cut Pro and open a Finder window.
Click on your user name in the side bar.
Open the following sub folders Library, Preferences, Final Cut Pro User Data.
Place the following files in the Trash:
Final Cut Pro 6.0 Prefs, Final Cut Pro Obj Cache, Final Cut Pro Prof Cache.
Empty the Trash.
Open Final Cut Pro. You will be asked to choose your working format (Easy Setup) and designate your scatch disks.
Maybe you are looking for
-
Since upgrading to Lion I am having problems with Safari on my Macbook Pro. I am using wifi to access the internet and the internet works in all other application except for Safari. When I try to access a webpage most times I get a error message sa
-
Setting up the Weblogic portal with Oracle Database
I am creating weblogic portal domain using oracle database a) At the “configure JDBC Data Source “ I have changed all database sources to oracle and before this I have created the weblogic/weblogic user id and required tables spaces also 1) cgDataSou
-
Using SYS_EXTRACT_UTC function in Oracle forms version 9
Hi, I would like to use the function SYS_EXTRACT_UTC in forms but I get an error 201: identifier 'SYS_EXTRACT_UTC' must be declared. How can I use this function? do I need any library or something? Thanks
-
Need to disable Fast User Switching on multiple machines
Hi, I have several labs with Fast User Switching turned on. I recently found out that it is incompatible with network home folders so I need a way to disable it on all of the lab machines. But from what I have seen the settings are part of ~/Library/
-
what is the best data structure to use for keeping four different data bases interconnected and updated about the changes in one another at all times while not using an existing java data structure but by implementing one by one's own? thanx .