Lost connection between ipod and laptop

Hi there,
Not sure if this is a question for ipod or itunes, but here goes.
I recently purchased a 5th gen ipod and installed itunes on my 2 PC's and a PC based laptop. All worked fine.
Now when I connect the USB cable to the laptop, I hear three quick beeps, (not the usual 2 beeps) my ipod starts charging, but I can't see the ipod in itunes.
When I check device manager, there is an entry with a yellow question mark (labelled ipod) which says the driver is not installed. However when I load the itunes CD, the wizard says no drivers found.
My ipod works fine on the 2 other PC's.
I tried system restore but for some reason it fails to go back to any restore points. whether that's part of the problem or a red herring, I haven't a clue.
Can anyone help?
Many thanks
Packard Bell Windows XP Easynote laptop

Could you be more specific like what happened will it not let you log in or not even go to that application be more specific and I will try to help you out

Similar Messages

I lost connection between Ipod and Macbook Pro Notes when I changed OS from Lion to Mountain Lion.

I changed OS X from Lion to Mountain Lion and:
New Mail application has no Notes.
A new Notes application is available.
In my Ipod I am was using Note application that normally was sincronized with Mail Note application. How can do a similar job?
Devices involved:
MacBook Pro 13-inch, Mid 2010.
Ipod Touch, software version 4.2.1

try this:
open disk utility and verify your disk permissions - if errors are found repair them....
then go to system preferences - network - advanced - look for the dns tab and enter the dns you see on the image below. after you've done that, restart your macbook and see if your internet pages loads faster.
good luck.

How do I fix lost connection between Photoshop and Dreamweaver CS4?

How do I fix the lost connection in Photoshop CS4 to Dreamweaver? When I save for web and devices, Photoshop doesn't save for web but instead saves to the original file in Photoshop. The image doesn't show up in Dreamweaver's image gallery at all. Do I remove both from my hard drive and reload both? I don't want to loose anything in Dreamweaver or Photoshop.

Not sure exactly what you are asking since I am still a student learning Dreamweaver so I can only describe what is happening in non-technical terms. I have set up files in Photoshop CS4 for images that I plan to use in Dreamweaver as a gallery of thumbs that enlarge using the Behavior panel. I did this with over 100 images, first creating the correct size in Photoshop, then going to Save for Web and Devices, saving, and the image would then show up in my images list in Dreamweaver.
Now, when I save for Web and Devices, save, it doesn't show up in Dreamweaver. Instead, it saves it back into my original Photoshop file with hyphens between each word.
I have Windows XP Professional, Adobe Creative Suite CS4.
I don't know how this glitch happened, I did nothing different and have used the process successfully already over and over. I read as much as I could understand on the Adobe website and apparently glitches do happen but I don't understand how to resolve this. Do I uninstall both Photoshop and Dreamweaver, and reinstall both?
I very much appreciate assistance!
Sieglinde Anderson

Connection between ipod and usb cord and computer or electrical plug

The usb cord that came with my IPOD got damaged and I bought a new one. When i connect my Ipod the screen is frozen and I am not getting a connection. It won't come on and I can hear it trying to connect. When it does flick on it will show the battery lightly lit up with the symbol. Please help.

I also love how no one knows how to fix this because Apple apparently only likes cash in order to help with anything. Thanks Apple for being such a great company and having all of your trust and knowledge with one person. Oh wait, he died. Have fun decoding all of his brilliant knowledge while everyone you graciously market to realizes that other companies are now almost equal rivals and cheaper. I mean honestly. Honestly.

Lost connection between ACS and AD

Hi
I'm having a trouble with authentication to my WLAN. We are running a solution with LEAP and ACS 3.0 which gets it's users from our Active Directory. During the summer our ACS-servers seems to have lost the AD-connection and I'm no longer able to EAP-authenticate. All I get in the ACS is "Radius extension DLL rejected user".
The AD and the ACS are on the same network but not on the same machine. I can log in if I add a local user in the ACS. I've also tried to empty my cached user database in the ACS but to no avail.
One theory of mine is that it has something to do with a couple och hotfixes that Microsoft released in the middle of July.
T.I.A
/Tommy

Hi
Thanks for your replies. An update on the issue:
I've gone through the issues in the suggestion made by cisco in the link:
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_field_notice09186a00800b1583.shtml
but to no avail.
At first we could se an error in the eventlog stating that the user didn't have sufficient rights but it disapeared when we created an account and ran the ACS-services via it.
After that we tried to set up a local user in the ACS and it works like a charm even then the AD-accounts can't connect.
We also tried to remove the hotfixes released by Microsoft but still nothing.
Right now it seems as if the AD authenticates the user correctly but then the ACS says no. Here's the eventlog and the corresponding ACS-log.
NT
AUTH 08/19/2004 08:20:27 I 0266 1524 External DB [NTAuthenDLL.dll]: Starting MSCHAP authentication for user [LINEDU\gustomedu]
AUTH 08/19/2004 08:20:27 I 0266 1524 External DB [NTAuthenDLL.dll]: Attempting NT/2000 authentication
AUTH 08/19/2004 08:20:27 I 0266 1524 External DB [NTAuthenDLL.dll]: NT/2000 authentication SUCCESSFUL (by METIS)
AUTH 08/19/2004 08:20:27 E 0266 1524 External DB [NTAuthenDLL.dll]: LookupAccountSidA failed
ACS
08/19/2004 08:20:27 Authen failed LINEDU\gustomedu Default Group 000a8aa291a8 Radius extension DLL rejected user .. .. 37 148.136.120.30
The status right now is that it is working as long as we restart the ACS-server once a day.
Tommy

Lost connection between CTC and ONS 15305!

I have one ring using ONS 15305 V3.0 nodes. All nodes are supervised by CTC. After a broken cable case, one node could not be supervised. However, I can access that node via CEC 2.2.In network view mode of CTC, I can see that node is logged in but logged out immediately then logged in and logged out again. I can not log in that equipment on-site via Management Port.

Could you be more specific like what happened will it not let you log in or not even go to that application be more specific and I will try to help you out

Lost connection between audio and video

Hello. Is there anyone out there that can explain why it does this Gyazo - 4c7ff4b6ffe628c097e099abeecab242.png when I'm dragging video, which was recorded toghether in Photo Booth on Mac. I want to drag the video together with the audio. I have done this before but now it just changed? Thanks.

Select both the audio and video and right-click 'link'

Stolen ipod and laptop

Suggestions from anyone would be great...have recently had the ipod and laptop with itunes library taken in a car break-in. What I would like to know is when I get the replacement goods can I re-download all the purchased songs, videos, tv shows etc to my new ipod. Have my library backed up to a certain point but any recent stuff won't be there so if anyone out there can help it will be appreciated...feelin' pretty cut off by not having my music!!!

Sad news.
http://support.apple.com/kb/HT1469
If you use iTunes store, you can download the lost content only buying it for the second time.
The rules are different in many other places.

No connection between iPhone and computer

I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
Please help me.
Sorry for the bad english.

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Heterogeneous connection between Oracle and Postgres.

Hi All,
I'm trying to make an heterogeneous connection between Oracle and Postgres since few days but i still having this error : "lost RPC connection".
First of all : I'm using Windows 7, Oracle 10g and PostgreSQL 8.4.
I have done the following operations :
1) Create a System DNS named "PG". (Test connection is OK)
2) Create the file "initPG.ora" in "$ORACLE_HOME/hs/admin" :
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = PG
HS_FDS_TRACE_LEVEL = ON
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
3) Configure the file "listener.ora" (in "$ORACLE_HOME/NETWORK/ADMIN") :
SID_LIST_LISTENER =
(SID_LIST =
     (SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
     (SID_DESC =
(SID_NAME = PG)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = Cédric-PC)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
4) Configure the file "tnsnames.ora" (in "$ORACLE_HOME/NETWORK/ADMIN") :
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Cédric-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
PG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = Cédric-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PG)
(HS = OK)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
5) Finally, i create my DB-Link and test it :
CREATE DATABASE LINK "CENTRALE_POSTGRES" CONNECT TO "user_login" IDENTIFIED BY "user_password" USING 'PG';
SELECT * FROM "dual"@CENTRALE_POSTGRES;
I got this error :
ORA-03135 : lost RPC connection.
As you can see, i have activated the trace level (HS_FDS_TRACE_LEVEL = ON), but the directory "$ORACLE_HOME/NETWORK/trace" still empty.
Any ideas ?
Regards

the tnsnames.ora alias PG is wrong - you need to have 2 closing brackets after the SERVICE_NAME so that HS=OK is outside of the CONNECT_DATA like:
PG =
<space>(DESCRIPTION =
<space><space>(ADDRESS = (PROTOCOL = tcp)(HOST = Cédric-PC)(PORT = 1521))
<space><space>(CONNECT_DATA =
<space><space><space>(SERVICE_NAME = PG))
<space><space>(HS = OK)
<space>)
Please be also aware HSODBC up to release 10.2 has been desupported since March 2008 and it was replaced by its follow up product DG4ODBC V11

Connecting between labVIEW and PLC S7-1200 using EPICS

Hello everyone,
I'm trying to connect between LabVIEW and PLC S7-1200 using EPICS. I did it using OPC and it succeeded and the communication was done, so right now i'm trying to do it using EPICS. so Can anyone help me with that?
Thanks in advance.
Ahmed

Hello,Ahmed:
Now I'm trying to conect S7-1200 to Labview by OPC server 2012, I'm newer for both PLC S7-1200 and OPC server. by the help file of NI's OPC I tested many times, but lost totally.
You mentioned that you have succeeded making the connection between them, could you please help me :
1) How to set in Simense TIA software? I can set the PLC's IP address now, that's all;
2) OPC server setting.
if there is a video, that will be great.
thanks a lot.
Delphi77.

Connection between O and BP is missing

Hi,
When i check inconsistency for a user, i am getting " Connection between "O" and "BP" is missing. When i check the Org.unit in PPOSA_BBP, i could see no BP exists for that Org.unit where user is assigned. I have replicated the org.unit from HR system but yet the BP hasnt been generated. Can you please share your idea on this.
Regards,
Prasath J

Hi Prasath,
This might be because you need to assign the user to a Purchasing Organisation or a Purchasing Group. If the user do not have BP created then you can do this by using tcode USERS_GEN.
Go to USERS_GEN and follow below steps :
1. Select Create User From Existing SU01 user
2. Enter the org id of the POrg or Pgroup under which you want to assign the user
3. Select country and execute
4. In next window one popup will occur, select Area Of User
5. In next popup enter the user id
6. Next select the user and click Ok.
7. This will create a BP and CP for the user and assigns the BP to the Org id of the POrg or Pgroup.
8. Now check the consistency of the user it will show all green.
It might give you error like eMail id for BP XXXXX is missing if the SU01 profile of the user does not contain any user id but it is not critical.
You can open the BP in BP tcode and enter the email id of the user.
Let us know if it solves your issue.
Regards,
Mayur

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

My Ipod and laptop were stolen...how can I duplicate all my purchased items

My ipod and laptop containing my Itunes library were stolen. How can I re-download my purhcased items without paying for them again. When I go into the store and check my download history and request available downloads I get a message saying all available downloads have been done for this account.

You could try contacting iTunes Store Customer Service and in the circumstances you might be able to persuade them to sanction a second free download. There have been occasional reports in the iTunes forum of this happening, however just be aware that they are not under any obligation to do so. If you click on this link it'll take you to the support/contact page: Customer Service - iTunes Store Support

How can i get my music library back, after my ipod and laptop are stolen? can anyone help

well about 2 months ago someone break in to my house and stole my laptop, ipod and some other stuff. I have just got a new ipod and laptop. is there anyway that apple can get my songs back or something?

Try here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Lost connection between ipod and laptop

Similar Messages

Maybe you are looking for