Lost connection between Power Book G4 and Brother Printer/Fax. Need help.

I am a new Mac user and until recently had a successful wireless connection to the Brother printer/fax. Address # 192.168.1.100 While printing a job I ran out of ink. I turned the printer off to replace the cartridge and lost the connection to the wireless powerbook. The printer works because it prints jobs from the PC that it is connected to by wire. So far I have clicked on "system preferences", clicked print and fax, Clicked + ato add printer and put the address in. Nothing is working. The message says, cannot connect to printer. I need serious, detailed help. My husband connects everything and gets it running and he just left for Iraq! Thanks so much!!

Hello! In the printer setup utility choose "show Jobs" and see if you can click on "start jobs". It's probably gotten stuck because it ran out of ink. Tom

Similar Messages

Bluetooth connection between Mac book pro and IPad

Hello,
i am having trouble creating a Bluetooth connection between a Mac book pro running Mac OS X 10.6.8 and a IPad air 2 iOS 8.1.2.
I have managed to pair the devices but when I try to create a connection to transfer data an error message on the Mac comes up saying "Bluetooth network unavailable, make sure device is on, in range and set up properly", similarly if a connection is tried from the iPad an error message comes up saying "make sure the device is on".
Both devices Bluetooth is on and discoverable and i have managed to pair them but can't create a actual connection!
Any help / ideas appreciated?
Best regards

Bluetooth paring for file transfer is not supported on iPads.
You can use Airdrop if both devices support it, or a 3rd party App, but you cannot directly pair an iPad to a Macbook and transfer a file over the bluetooth connection.

Connection between Mac book pro and thunderbolt Display

When im connecting my mac book pro to the thunderbolt display ,it keep disconnecting from the internet.What i need to do with connection? Please guide me ,what i need to do when im connecting thunderbolt display to my macbook pro and wifi will work?

Bluetooth paring for file transfer is not supported on iPads.
You can use Airdrop if both devices support it, or a 3rd party App, but you cannot directly pair an iPad to a Macbook and transfer a file over the bluetooth connection.

Lost connection between my Mail inbox and e-mails in Finder.

In an attempt to transfer my e-mail to a newer MAC my intern managed to move all my e-mail files from Libary > Mail > POP-an***.com to the Trash folder!
I have recover all the files and placed them back in the above folder but they are no longer connected to my Mail application.
They are visible in the Inbox, but if I click on any of them, they open as a blank page.
Does anyone know how I can reconnect this broken link or at least move then to an 'ON MY MAC' folder so that I can search them easily?
Andrew

When you move email messages in the Finder, you mess up the Envelope Index. If so, then you probably need to force a reindexing of all mailboxes. To do this, see:
http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
If you only have POP accounts, then you only need deal with the Envelope Index removal, but everyone should note that if there are any IMAP or Exchange accounts, they require the special treatment outlined in the article.
Ernie

Lost connection between airport time capsule and extreme, can't get extreme back in network, says connection excellent

I have 2 terabyte Time capsule, last gen, not newest. I have a similar airport extreme to extend my network. I was running Lion. I upgraded to Maverick to see if it would fix this problem, and it did not. When using airport utility, latest version, it says that the extreme has an excellent connection, but fails to extend the network. This started the last time I upgraded Lion. I have tried rebooting, renaming the extreme to no avail. I moved it to the same room as the time capsule, no luck.

Hello Thomas,
You may want to try performing a factory reset on the AirPort Extreme.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
http://support.apple.com/kb/HT4259
Cheers,
Allen

Losing connection between my aiport express and William Sanoma Smart Thermometer HELP !!

I got a WS Smart thermoneter for xmas and once setup it will work with my iphone or ipad one time then it loses the connection to my airport express. Please help

Sounds like an interferance problem to me. Do you have a cordless phone? You can try changing the channel on the AEBS or enable internet robustness.

Windows 7 and Bonjour--Printer issue--Need Help ASAP, Please!

Okay, add my name to the growing list of people with Windows 7 issues. (Actually, add my wife's name. I have a Mac, and I'm glad I do.)
Anyway--she has a new HP laptop with Windows 7 preloaded. We use Airport Express as a wireless router for our 5 year old HP PSC 1350 all in one printer, requiring the use of Bonjour 1.0.6 on her new laptop to print wirelessly. Except it is only printing about 2/3's of a page and quitting. This also fouls up the printing que, meaning nothing else will print on her unit. (I have not tried printing from the Mac while her HP is AFU.)
How do I rectify this, other than taking her HP back and getting the Mac she'd be happier with?
Any and all help would be greatly appreciated, as she's in school and needs to print a lot of papers.
Doc

There has been no satisfactory answer to this. So, no, my question isn't really answered.
Instead, we bought a new wireless printer, and I removed Bonjour and AirPort from her Windoze 7 unit.
I'm not so thrilled, but she's happy. And if she's happy, it's okay.
I guess.
Doc

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password

I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results!

I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results! Can you help?

Error message as above and below:
'Send Message Error
The message could not be sent because connecting to SMTP server mail.btinternet.com failed.
The server may be unavailable or is refusing SMTP connections.' (etc.)
BT won't deal with this - they redirect me to a 'partner' who want to charge to discuss the problem. Nice, eh!

HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

Connection between CRM back end and ASP front end website for Ecommerce

Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,

Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen

Regarding connection between front end HTML and back end SQL 7.0

Hi!!
I am working on the project 'ERM'. I have designed 12 forms using HTML. Can u please give me brief idea how to establish the connection between a back end and front end i.e. between HTML and SQL 7.0. If possible can u provide me the source code for the same.
I will be very thankful to you.
Thanks,
Jigar.

Read up about multi-tier applications.
You need servlet and JSPs for the server-side presentation layer, some classes for the business logic, and some mor for the persistence layer either using JDBC or some framework like Hibernate.

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

How to make the connection between a sale order and an invoice in SDK

Hi,
Im trying to make the connection between a sales order and an invoice using the SDK.
Here is how i create each of them:
Invoice:
public int SalesInvoiceInternalSave(string buisnesspartnerCardCode, DateTime dueDate, double discountPercent, string id, IList<InternalItem> items, ref int invoiceId)
      int res = 0;
      SAPbobsCOM.Documents invoice_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
      invoice_entry.CardCode = buisnesspartnerCardCode;
      invoice_entry.DocDueDate = dueDate;
      invoice_entry.DiscountPercent = discountPercent;
      invoice_entry.Reference2 = id;
      foreach (InternalItem item in items)
        invoice_entry.Lines.WarehouseCode = item.Shopid;
        invoice_entry.Lines.ItemCode = item.Code;
        invoice_entry.Lines.ItemDescription = item.Name;
        invoice_entry.Lines.Quantity = item.Quantity;
        invoice_entry.Lines.UnitPrice = item.Price;
        invoice_entry.Lines.Add();
      res = invoice_entry.Add();
      return res;
Sales order:
    public Boolean SalesOrderInternalSave(string orderId, string buisnesspartnerCardCode, DateTime dueDate, IList<InternalItem> items)
      SAPbobsCOM.Documents order_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
      order_entry.CardCode = buisnesspartnerCardCode;
      order_entry.DocDueDate = dueDate;
      foreach (InternalItem item in items)
        order_entry.Lines.WarehouseCode = item.Shopid;
        order_entry.Lines.ItemCode = item.Code;
        order_entry.Lines.ItemDescription = item.Name;
        order_entry.Lines.Quantity = item.Quantity;
        order_entry.Lines.UnitPrice = item.Price;
        order_entry.Lines.Add();
      int res = order_entry.Add();
      return res == 0;
What do i need to change to get the connection between the two of them?
And how do you insert a amount (not percent) discount into an invoice?
Regards,
Torben

Hi,
Add the sale order, then add the invoice. and while adding the invoice please add the following details to the invoce documen
invoice_entry.Lines.BaseEntry = 'Doc entry of the newly created SO
invoice_entry.Lines.BaseLine = 'Line No of the SO
invoice_entry.Lines.BaseType = 17 'For sales order document type.
Hope it helps,
Vasu Natari.

Help Needed in establishing connection between Kepware OPC server and UDS 4

Hi All,
I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
Any standard documentation on UDS 4.0 will be of great help.
Thanks in advance,
Shyam

HI Rajesh,
I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
Actuallt the Kepware OPC server and UDS are installed in the same machine.
Can you plz through some ligh on this
Regards,
SHyam

Lost connection between Power Book G4 and Brother Printer/Fax. Need help.

Similar Messages

Maybe you are looking for