Lost connection to 4402 WLC after upgrade

I setup a 4402 this evening an everything was going great. The unit had v4.2.130.0, I need to upgrade to v6.0.182.0.
The upgrade guide requires the following upgrade path v4.2.130.0 > v4.2.176.0 > v6.0.182.0.
I began with the upgrade to .176 and everything was fine. HTTPS / SSH2 was working fine. I could ping the WLC and see both ports from the neighboring switch (cdp neigh). Then I upgrade to ver 6.0.182.0 and I could no longer HTTPS / SSH2 to the WLC. CDP neigh on the connecting switch no longer recognized one of the uplinks.
I have the switch (a Cisco 4507R) configured with a port-channel to the two WLC ports (1 and 2), the WLC is configured with LAG enabled. The port channel was still up as were both ports and no errors in the switch log.
I checked (via Console) the WLC management vlan... that seemed fine. My IP info was fine... Im sure im just overlooking something very minor... any suggestions would be greatly appreciated. I think after sitting here for so long and trying to find it, Im having tunnel vision.
Thanks in advance!
Rich

No, I didn't touch the boot strap, as per the instructions of a co-worker. I was wondering if this could be my issue.
I am unfortunately in NYC and the WLC is located in Ottawa, Canada, and no one is available patch the management port. Our " Standards" don't include the use of the management port so I didn't even have it connected.
Yes, I did have HTTP and Telnet disabled as per out "Standards".
As of right now I am dead in the water. I had a PC with Net Meeting setup, but the screen saver was never disabled. I went ot get a bite to eat, and yeah... now im locked out, what a night. Fortunately for me, this wasn't a production device. and the site didn't have wireless in the past.

Similar Messages

Lost connection to personal hotspot after upgrading iTunes

Hi Ladies and Gentlemen ,
Used to enjoy connecting my Mac Pro (Mac OS X 10.6.8) to personal hotspot through USB port (since I don't have WiFi card installed.
Was fantastic.
Received a message to upgrade iTunes ... I did ... and the joy has gone (Grrrr) .... Lost the USB connection to Personal Hotspot.
Now I have upgraded iTunes + iO7 ... still have the same problem ... iPhone 4S doesn't appear on the network via USB.
Help
Best regards.

" ... other things will show up with that name ..."
Well, the one thing I can think of is that your iPhone will show up with "that name" on iTunes' summary tab when you sync it. Also, if you receive any warning messages from iTunes on your computer, the messages will have that name.

Lost Deskjet 5740 printer driver after upgrade.

Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problems connecting to the internet after Upgrade from windows 8.1 pro

Cant connect to the internet after upgrading to windows 8.1 pro, what can i do to rectify this problem?
Thanks

Hi,
You can also try to install the older version in compatible mode:
Windows 8.1 Wifi showing "limited" or "No Internet Access"
Solution: revert your network adapter driver back to an older version
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
In addition, disable power management on your network driver:
Open Network and Sharing Center.
Click the Change adapter settings link in the upper left of the navigation pane.
Right click the network connection you want to enable/disable power management support on and click Properties .
Click Configure .
On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
If the issue still persists, please upload the event log for our research:
Kate Li
TechNet Community Support

My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2

My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2, someone with the same problem? Just think when I enable the 3G, soon followed falls again.
I have already put another chip carrier and the same problem happens, my phone is factory unlocked.

Had same problem with iphone5 6.1.2 update. First tried reset network settings and didn work... Support recommend me a restore and ended up in recovery loop with iTunes error (-1)
Been at my carrier store (Optimus Portugal)... and iPhone sent to warranty. After 2 macbooks, 1 imac, 2 appletvs, 2 iphones, 1 ipod... I find disappointment with apple reliability....
At least the support guys at Optimus Portugal were very helpful and friendly, but I'll be 15 days without iPhone...
Regards
Joao

Can't connect ipad to wifi after upgrading to ios6

can't connect ipad to wifi after upgrading to ios6

Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi. (This is probably not practical in your situation.)
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

I lost my gtk fonts antialiasing after upgrade

Again, i have problems after a global upgrade.
I lost my gtk fonts antialiasing after upgrade. I lost the fonts quality of the programs that use gtk-engine like (firefox, thunderbird, etc). Here is the pacman log:
[08/04/06 15:15] synchronizing package lists
[08/04/06 15:15] starting full system upgrade
[08/04/06 15:42] upgraded kde-common (3.5.3-3 -> 3.5.4-1)
[08/04/06 15:42] upgraded arts (1.5.3-2 -> 1.5.4-1)
[08/04/06 15:43] upgraded libgnomeui (2.14.1-1 -> 2.14.1-2)
[08/04/06 15:43] upgraded gnome-desktop (2.14.2-1 -> 2.14.3-1)
[08/04/06 15:43] upgraded eel (2.14.1-1 -> 2.14.3-1)
[08/04/06 15:43] upgraded libsoup (2.2.93-1 -> 2.2.96-1)
[08/04/06 15:43] installed libldap (2.3.25-2)
[08/04/06 15:43] upgraded evolution-data-server (1.6.2-2 -> 1.6.3-2)
[08/04/06 15:43] upgraded font-bh-ttf (1.0.0-2 -> 1.0.0-3)
[08/04/06 15:44] upgraded gail (1.8.11-1 -> 1.8.11-2)
[08/04/06 15:44] upgraded gnome-menus (2.14.0-1 -> 2.14.3-1)
[08/04/06 15:44] upgraded gsfonts (8.11-3 -> 8.11-4)
[08/04/06 15:44] upgraded gtk-qt-engine (0.7-1 -> 0.7-2)
[08/04/06 15:44] upgraded gtk-xfce-engine (2.2.8-2 -> 2.2.8-3)
[08/04/06 15:44] upgraded gtkhtml (3.10.2-1 -> 3.10.3-1)
[08/04/06 15:45] upgraded jre (1_5_0_07-1 -> 1_5_0_07-2)
[08/04/06 15:45] upgraded kdelibs (3.5.3-3 -> 3.5.4-1)
[08/04/06 15:45] upgraded kdebase (3.5.3-4 -> 3.5.4-2)
[08/04/06 15:46] upgraded kde-i18n-pt_br (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:46] upgraded kdeaccessibility (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:46] upgraded kdepim (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:47] upgraded kdemultimedia (3.5.3-2 -> 3.5.4-2)
[08/04/06 15:47] upgraded kdegames (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:47] upgraded kdeaddons (3.5.3-2 -> 3.5.4-1)
[08/04/06 15:47] upgraded kdeadmin (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:47] upgraded kdeartwork (3.5.3-2 -> 3.5.4-1)
[08/04/06 15:47] upgraded kdebindings (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:48] upgraded kdeedu (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:48] upgraded kdegraphics (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:48] upgraded kdenetwork (3.5.3-4 -> 3.5.4-1)
[08/04/06 15:48] upgraded kdesdk (3.5.3-2 -> 3.5.4-1)
[08/04/06 15:49] upgraded kdetoys (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:49] upgraded kdeutils (3.5.3-2 -> 3.5.4-1)
[08/04/06 15:49] upgraded kdewebdev (3.5.3-1 -> 3.5.4-1)
[08/04/06 15:49] upgraded nautilus (2.14.1-2 -> 2.14.3-1)
[08/04/06 15:49] upgraded openldap (2.3.24-1 -> 2.3.25-1)
[08/04/06 15:49] upgraded ttf-bitstream-vera (1.10-4 -> 1.10-5)
[08/04/06 15:50] upgraded xorg-fonts-100dpi (1.0.0-2 -> 1.0.1-1)
[08/04/06 15:50] upgraded xorg-fonts-encodings (1.0.0-1 -> 1.0.0-2)
[08/04/06 15:50] upgraded xorg-fonts-misc (1.0.0-2 -> 1.0.0-3)
why the maintainers dont test the pkgs (especialy the gtk app) before the refresh of the source mirrors? this is terrible boring...

JGC wrote:Update from an up-to-date mirror? The current version of kde-common is 3.5.4-2. As a workaround, you could go to the KDE font preferences, disable AA, apply and enable AA after that, it should work with non-KDE apps then too again.
i change the fonts style on the kcontrol to defaults and after that i set on the gtk-engine to (use my kde fonts in gtk app) and i restart the applications...now seems to be ok... thx

I lost some of my contacts after upgraded to ios6 on my iphone4, please help!

I lost some of my contacts after upgraded to ios6 on my iphone4, please help!

Backup is your best option if you have one. Reverting software will not bring the contacts back.

Can no longer connect to certain shares after upgrading to 10.8.4

After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
Can anyone help?
Thanks!
Jon

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

How to connect to HD TV after upgrade to OS 10.8.2

How can I connect to my Sony HD TV after upgrade to OS 10.8.2?
It worked before I upgraded and now it doesn't recognize the TV in the Display Pref.

are you using airplay via ATV or a wire or what?

Can no longer connect to wireless router after upgrading to iTunes 9.2

My wireless connection was fine (using MacBook). After upgrading iTunes, I can not longer connect to router/modem wirelessly - am tethered with an ethernet cable. Spent 1 1/2 hours on phone with AT&T support reseting the passwords, security, etc. A PC laptop accepts password and can connect. My iPhone still can connect. But my MacBook (OS X 10.6) will not recognize my password for the modem/router. Everything has been re-booted and reset to original settings. Also, I received an iPad yesterday and it won't accept the password for our home wireless network. The password is correct because I am using it on other devices that are connecting to the network. Any ideas?

Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
Thanks for your help.
D

PC Suite doesn´t connect to N80 IE after upgrade

I recently got the new N80 IE. Everything was fine using the version of PC Suite which comes with the phone. But after upgrading the the newest version, the USB cable connection doesn´t work anymore (using the phone as USB disk still works). There are no error messages. When trying to connect via cable the connection assistant just doesn´t proceed when i press the "continue" button. I´ve uninstalled all components. I started the Reg Cleaner but with no success. Any ideas (ok haven´t tried to install the old version)

Thanks for the advice. It works! But now, although PC Suite shows that the phone is connected 'Nokia 6020 connected via IrDA', I can't get the programs within PC Suite to connect. When I start Synchonise, it says phone not connected. When I select a phone, the 6020 is listed, and when I click on connection to select Infrared nothing happens - I can't proceed further from here.
kriben

Error message: Lost Connection in Ps Touch after trying to sign in to CC

Hello, Here is the sequence of my steps I do up to when I get the problem. I click on upload to creative cloud in ps touch, then I select files to upload, all fine, then I put in my email and password - I have no problem with them, they work fine, I checked on the website. Right after it should sign me in, I get this message: lost connection. please check your connection and try again. My internet connection is working very fine at the moment I sign in through ps touch - keep that in mind. This message keeps showing each time I try to sign in. I have no idea what is wrong. Please help me!

Hi Fellow144,
What operating sytem you are currently using?
However, please try to perform the following steps.
Clean up cached user login information:
Delete the opm.db file.
Close the Creative Cloud application.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
Delete the opm.db file.
Launch Creative Cloud.
Regards,
Sumit Singh

I lost all my e-mails after upgrade to iOS 5 - how to get them back?

Just like described in the subject - after upgrade to iOS5, I lost all mail e-mails. Have you experienced similar issues? How did you resolve it?

restore from backup. and use IMAP instead of POP if you can.

Lost connection to 4402 WLC after upgrade

Similar Messages

Maybe you are looking for