Lost Connection To Airport Extreme HD after Upgrading to Lio

Since installing Lion, I cannot access a specific HD connected to my Airport Extreme. It locks up the computer with a permanent spinning beach ball. All of the others on the network - not running Lion - connect to that drive as usual without difficulty.
Complicating things, from the Lion computer, I can access another HD without difficulty connected to the same Airport Extreme. In other words, connecting to one specifc harddrive is a problem. It's a WD 2TB USB.
Help appreciated.

I am having the same issue with mine, and it is also a 2TB drive, but its a Seagate drive.

Similar Messages

Windows XP lost connection to airport extreme base station

I had a perfect connection after setting up my Airport Extreme with my Mac Book Pro and my HP laptop and one HP desktop then when trying repair media center. I did install the airport utility in XP but when trying to scan it cannot pick up my base station. It worked perfect before now I am at a hold and I don't know what direction to take.
Some questions.
How do I find the IP address on my Airport?
Do I need to create a new wireless network since the airport utility does not pick up the base station?
When I search available networks on the PC why doesn't mine show up?
Can someone point out the steps to take to get this crappy PC back on the internet, oh by the way it's my wife's and now she's on mine and I need to get her back on hers ASAP!
Thanks I appreciate your time to help out!

>How do I find the IP address on my Airport?
The default LAN-side IP address of the AirPort/Time Capsule is: 10.0.1.1.
>Do I need to create a new wireless network since the airport utility does not pick up the base station?
You shouldn't have to. Assuming that the base station is still providing a wireless network, you should be able to access it with the AirPort Utility. To do so, run the utility, and then, select File > Configure Other ... from the utility's menu bar. Enter 10.0.1.1 in the Address window and the Base Station Password in the Password window. If you did not change the Base Station Passwork, the default is "public."
If you are still unable to access the base station via the utility, then try temporarily connecting an Ethernet cable between the computer and the base station ... and then, try accessing it again.

Lost connection between airport extreme and macbook air when transferring large files

Can anyone help...?
I have an imac and macbook air wirelessly connected to a airpot extreme being used as a router with a hard drive for sharing files accross the network.
It connects ok but when we try and look at a number of large files one after the other, or copy files from the shared hard drive onto the macbook air, the macbook loses wireless connection?
A very strange issue which i cant figure out....
Can anyone help?
Thanks
Shirmy

It could be a wireless interference or strength of wireless signal issue.
What happens when you connect the MacBook Air to the router via an Ethernet connection?

Can't connect to airport extreme after installing 10.10

After installing OS X 10.10 WiFi connection with Airport Extreme drops out a couple of different ways. Log in fails, Says Airport extreme is not there (2ft away), drops data connection with all WiFi bars showing.
Drops data connection mid data transfer. Then after sever power recycles of the MacBook Pro connection comes back.
Light on Airport Extreme is blinking. This iMac is also connected passing data via the same Airport extreme while the MacBook Pro is having the above experiences.
Anyone experiencing WiFi issues since 10.10?

You can download the Apple Airport Utility directly from Apple:
http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
Regards,
Shawn

Lost wifi connection with Airport Extreme.

Lost wifi connection with Airport Extreme. When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme. I have been using airport extreme for 6 months or more and everything has been working fine.
When I diconnect my airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection. According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi.

I have the same issue, I'm getting droppeds from wireless constantly

My iMac and iPad keep loosing the wireless connection to Airport Extreme issue started after I installed Lion?

Since installing Lion, I have been loosing my connection to airport Extreme after I have put my IMac in sleep mode. My Ipad is also loosing the connection. This issue started since the installation of Lion, is anyone else experiencing the same thing?

I've had that problem on my macbook running 10.5.8 for a few years. Sometimes it's worse than others. No other computer in my house has this problem.

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

Time Machine clueless about external HD connected to Airport Extreme

This is not my first post about HD connected to Airport Extreme. Just came back from Apple store. Spoke to Geniuses there in tech support desk and they are clueless.
Here is situation: have 7 Macs in the house connected to Airport Extreme wirelessly. In that respect things are working fine. Last week I purchased brand new WD My Book external HD and connected it to Airport Extreme using USB (it also has Fire Wire but that is not a point here).
As per forum advices I re-formated drive using disk utility to Mac Extended journaled, GUID. here is result:
iMAC x 3, with Tiger - see, mount and use My Book easily, shows on desktop as mounted drive
MacBook Pro w. Tiger - same as above, back up every day to My Book
MacBook with Leopard x 2 - no My Book on desktop, Time Machine doesn't see it
Mac Mini with Leopard - same as above, no trace of My Book, Time Machine doesn't see it
* This problem evolved from me having regular 160 GB FAT32 HD connected to Airport Extreme. Again Tiger machines were using that drive every day no sweat.
* Then I decided to upgrade all Macs to Leopard for one single reason only - Time Machine. (Good that I didn't do it but rather decided to introduce new, bigger and better USB drive first).
* Western Digital My Book is being sold in Apple stores as "drive that is recognized by Time Machine" so I bought 1TB unit.
* All Macs and Airport Extreme are up to date.
Any suggestions? Thank you in advance,
Zack

I cannot tell you why your Apple Genius told you what he did, but he/she was dead wrong. Apple sells its Time Capsule product, so they are not interested in making the AEBS a product competitor.
I will give you a little secret for which you will forever be indebted to me.
Open your Terminal application in the Utilities folder and at the prompt enter or paste the following command pressing RETURN after:
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Miraculously your problem will be Solved.

Help connecting an airport extreme

help connecting an airport extreme

Unfortunately, it appears as if a major portion of your post must have somehow been lost when you posted your question. All that we got was....
help connecting an airport extreme
We received no information about any of the following:
1) The make and model number of your modem
2) What kind of computer or device you are using to configure the AirPort Extreme
3) What operating system your computer is using
4) What service(s) that you want the AirPort Extreme to provide on your network
5) What configuration steps you have already performed
6) What happened after each step
If you could re-post with this basic information, one of the experts here will be able to help.

How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer. Can anyone help me? Thanks!

You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

Time Machine doesnt see my USB drive, connected to Airport extreme =(

Hello,
I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
osx 10.5.5 with airport utility 5.3.2
Thanks in advance!

Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
Good luck everyone who struggles with this.
David

Macbook pro connects to airport extreme only 50% of the time

Hi,
I have a mac book pro that i use with an airport extreme unit. When the laptop comes out of hibernation it does not connect to airport extreme. I have to put it back to sleep and start for the second time for it to connect. Any ideas on what the problem is?
thanks!
MacBook Pro Mac OS X (10.4.10)

Hi Laurent,
although I was given the advice earlier that I should simply take the machine back to the shop, or call the help centre, I ended up just praying that it would be OK. A couple of days after I posted the message I think there was an update to download and install, just a regular one from Apple from the Software Update option for the operating system or it may have been one for Final Cut Pro X, and once it installed I never had the problem again, so my prayers were answered.
It was pretty scary at the time because I thought it must be some hardware malfunction, but because it was resolved through an update it suggested it was a software issue. Hopefully it is the same with you.
I'm now running 10.7.2 and have had no recurrence of the problem in many months, thankfully.
It might have nothing to do with it, but the only other two things that may have somehow caused errors in the system startup (and I doubt these will be "unrelated" to people who know how computers work better than I do, but I feel I should mention them just in case), but I also updated Final Cut Pro X from a glitchy version to version 10.0.2 around the same time, and I also had an application installed which didn't function correctly in OS10.7 called PowerController (a simple app that can start up the computer at a set time and play music from iTunes as an alarm clock) and it was in the group of apps that were set to start at the starting up of the computer.
Anyway, I hope your problem is resolved as easily. Pray about it too!

I connected an airport extreme (2013) to an existing pc network

I connected an airport extreme (2013) to an existing pc network and I had to change all my ip addresses. I managed to catch on to the apple replacement range and reset all my printers' addresses manually. Was there an easier way to handle this? Also, I lost the connection to my WD Worldbook drive though and haven't been able to come up with a work around. Any ideas would help, thanks!

First, to answer your question about the WD drive - I could not find it with an ethernet connection. I tried connecting to the usb port on the Extreme, but it was not visible there either.
When connecting an external network drive to the AirPort Extreme by Ethernet, the drive would be providing the file sharing service. This would be typical of a Network Attached Storage (NAS) device. If your WD Worldbook offers NAS services then it should be found by network clients per WD's instructions.
When connected to the Extreme's USB port, the Extreme would take over the file server services. However, the drive must not be formatted in either NTFS or ExFAT as either are not recognizable by the Extreme for sharing out. My guess is this is the case and why the AirPort Utility cannot "find" the drive.
If your WD Worldbook has an Ethernet interface that is the one you should use for best performance. It is still possible that this drive is using an IP address that is not in the default range of the Extreme.
How can I reset the IP range on the router. I have to use the iPad app to manage the router and I didn't see any way to change the range. Did I miss something or would I need to use an Mac computer to get more options?
You can change the IP address range of your AirPort using the AirPort Utility on your iPad.
To change the range:
Run the AirPort Utility.
Select the AirPort Extreme, and then, select Edit.
Select Advanced.
Select DHCP Range.
Select 192.168

Mouse quits w/printer connected to airport extreme

After 2+ yrs w/ no problems, now, mice will not move cursor when HP PSC2410 is connected to Airport Extreme, internet is OK. If I plug the printer directly into the mini, mice work fine. What the........!&%$

After 2+ yrs w/ no problems, now, mice will not move cursor when HP PSC2410 is connected to Airport Extreme, internet is OK. If I plug the printer directly into the mini, mice work fine. What the........!&%$

Lost Connection To Airport Extreme HD after Upgrading to Lio

Similar Messages

Maybe you are looking for