Lost connection to device

During Premiere Pro CS5 capture with a new tape containing an original recording, I keep getting a "Recorder Error" "Lost connection to device" windows. I can resume capture by clicking on the record button in the capture window and it continues with a new file name. For example: Clip 01 3.avi continues as Clip 01 4.avi, then Clip 01 4 1.avi, Clip 01 4 2.avi, etc. This occurred 10 times across the span of a 45 min recording.
When I attempted to import the clips, it says that the file is unsupported or damaged. The only one that I can use is the very last clip in the sequence (Clip 01 4 9.avi). Please advise what I can do to capture my full video. Thank you.

1-What update level are you for CS5? (I think current is 5.0.3)
2-What Firewire driver are you using?
Legacy Driver and Capture http://forums.adobe.com/thread/869277?tstart=0
- And a Picture http://forums.adobe.com/thread/727755?tstart=0
3-What camera brand & model?
4-How many hard drives, and which one is your capture drive?
5-Have you tried different capture software?
SD capture http://windv.mourek.cz/ or http://www.scenalyzer.com/main.html or http://www.exsate.com/products/dvcapture/
Do note that the demo version of ScenalyzerLive puts a watermark in the files it creates
- I'm told that the OLD version of Scenalyzer is freeware... check the download page for details
Try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

Similar Messages

E5: Ovi Suite has lost connection with your device...

I am trying to update the software on my E5 using OVI suite but I keep getting an error during the install phase (after backup). The following error and instructions are displayed in the OVI suite window but makes no difference when I follow these instructions (just end up back with the same error).
"Nokia Ovi Suite has lost connection with your device. Follow these steps to help reconnect your device:
1. Remove USB cable from your device.
2. Restart the device (turn off and on again).
3. Re-insert the USB cable.
4. Click 'Ok' below to continue updating."
Current E5 software version is 042.007.
I am trying to update to E5 software v. 043.115
Any ideas?

Yep having the same issue. Just got a replacement handset due to the random restarting issue, soon after setting up the new handset I get a message on phone saying software update is available. Both OVI suite and Nokia software updater say version 43.115 is available (about 200mb in size), I currently have the same version as you 42.007. It claims to do a lot of improvements to the handset. The update downloads fine but when it comes to installing I keep getting the same issue. Phone simply will not restart automatically and the update restarts then fails at the same point over and over. Had the same problem with my previous handset.
I spoke with my network provider to see if it was an issue with the handset needing firmware specific to them but they said no it is an issue with the firmware itself and has been happening to everyone since its release!!! They said I should not download it until Nokia has resolved the issues with it. But how do I know when that will happen as I cannot find anything put out by Nokia stating there is an issue or anywhere on web forums saying there is actually a problem.

My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem?

My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem? We always used to FaceTime. And now all of the suddenly we can't.

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

EX60 - Lost connection with control device

After upgrading my EX60 from 6.3.1 to 7.1.1 I now receive "Lost connection with control device" and the touch control panel sits in a spinning loop.
I also reveive the following within the web management interface on the EX60:
ERROR: Touch panel connection
No touch panel detected when indicators forced
If I downgrade back to 6.3.1 it works again. I have already rebooted and factory reset the entire unit and also disconnected and reconnected the touch panel.

I'm having the same error message on an SX80 with no touch panel
We use a Crestron controller so we will never connect a Cisco touch panel... we just want the error message to go away in the diagnostics/troubleshooting web page.
ERROR: Touch panel connectionNo touch panel detected when indicators forced

"Lost Connection with AIM" repeatedly

Hi there,
I'm using a new Linksys WRT54GL router with the DD-WRT v23 firmware -- which is otherwise fabulous, by the way -- but since going with the router iChat has been pretty unreliable. I can't connect to my sister in England (I'm in Canada): we keep getting "insufficient bandwidth" errors (I'm on a very hi-speed cable internet connection, so I don't think it's me!). Moreover, AIM frequently kicks me off iChat with the message "Lost connection with AIM".
I've configured my router using instructions linked from this forum. I'm forwarding the following ports to my computer:
5060
5190
5220
5222
5678
16384
And while I can connect to other users okay (except my sister, it seems), staying connected it a real issue. Can anyone recommend a fix?
Thanks,
Aaron.
PowerBook G4 15-inch 1.67 GHz Mac OS X (10.4.5) The last PowerBook ever!

Hi Aaron,
This last port should be a group of 20 ports (16384-16403)
iChat needs 4 ports from this group to do 1-1 Audio or Video chats.
Many Linksys have UPnP. It is found in the Administration tab. If you have this you could use this. Disable the Port Forwarding if you do.
Also port Forwwarding points to one IP/computer. If this is the case for you and you still have the device doing DHCP there is a cance you computer's IP has changed if it goes to sleep or is shut down when the lease time runs out.
Check this on your computer and the Port Forwarding settings.
10:26 PM Monday; February 27, 2006

Lost connection with server

For about two days now, the bbm application has refused to launch. It has been writing lost connection with server....can any one please help! It's really urgent

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Nokia Ovi Suite has lost connection with your devi...

5 months has passed and many hours on the phone to Nokia. The phone has been completely reset /reboot by Nokia time and time again and still the phone gets this message when trying to update software..."Nokia Ovi Suite has lost connection with your device"....We were optimistic that the software upgrade would solve the other problems we are having with all the Nokia phones at work. They are all E52's

Having the same issue currently with an E72 software version is 054.005.266.02 and Ovi Suite 3.1.1.80
Actually I had connection lost all the time with all previous versions of Ovi Suite too... it has never been reliable.
Using original Nokia USB cable, connected securely. Tried different PCs, different USB ports, same issue.
Just now I'm trying software update and it looses connection during the backup process all the time... very disappointing. Screenshot attached if anybody is interested.
Attachments:
nokia_conn_lost.jpg ‏40 KB

'Disk Utility has lost connection with Disk Management Tool' w/ RAID 10 set

Using 4 internal drives, I have specified the following setup for each:
2 partitions, 1 'speed' of 5 GB and 1 'data' of whatever remains.
The 4 speed partitions stripe to a single RAID volume correctly.
The 4 data partitions are used to make a RAID 10 volume as follows:
The first 2 data partitions are mirrored to make a 'data-A'
The next 2 data partitions are mirrored to make a 'data-B'
These complete correctly.
Upon attempting to strip data-A and data-B in order to finish the RAID 10 setup, Disk Utility quits with the following message:
"Disk Utility has lost connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility'.
A search here and on the nets reveals only that this message appeared in 10.3.x when attempting to repair disk permissions and had to do with a rogue iTunes support file. This is occurring on a blank system (no iTunes installed) so I don't think its the same cause.
Note that I was able to complete this setup under Tiger several times without issue, so it seems to be unique to Leopard. Does anyone know what is going on and hopefully suggest a workaround?

To answer my own issue and leave a marker here for others, I was able to successfully set up a RAID 10 partition using diskutil, indicating that the problem is Disk Utility itself and not the RAID implementation.
Disk Utility has proven itself to be bugridden (must restart frequently to get updated view of volumes; drops device names at various times; etc.) and this latest bug would seem to suggest that it should be avoided in favor of diskutil for any serious RAID construction.

I did allllll that is listed below, but when I get to sync iPad, it won't sync, what do I do? Preparation Before you connect any device to a new library go to the Devices tab

THis is what I did, but when I get to sync, it won't sync.....what do I doLynnLynn
Preparation
Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
If this device contains contacts or calendar items that are not already on the computer you are using, and that you wish to recover, then make sure you have at least one contact & one event in the applications that will sync with the device (e.g. Windows Address Book or Outlook under Windows, iCal & Address Book on a Mac).Dummy entries will do, but there must be at least one if the data is to be retrieved from the device in step 7 below.
Transfer purchases
You can transfer your iTunes Store purchases into a new library, after connecting the device, with the menu itemFile > Transfer Purchases from <Device>. You should be prompted to authorize the computer to your iTunes account if you have not already done so. If your device holds content from more than one account you will need to authorize each one.
See also: HT1848 - iTunes Store: Transferring purchases from your iOS device or iPod to a computer.
Back up (iOS only)
If this is an iOS device you should now right-click on it (control-click on a Mac) in the left-hand column of the iTunes window and click Back Up to make a backup of the current settings and application data on the device.
Recover other media
iTunes only permits the transfer of iTunes Store purchases. If your device contains other media that you've ripped from CD or downloaded from other online stores you can either go back to the original sources or use third party software to extract your data from your device. There is a list of some of the software available below.
Recover other purchases
Your device may not have held all your iTunes Store purchases. You can recover qualifying purchases from your account by visiting the home page of the iTunes Store and clicking on the Purchased link in the Quick Linkssection in the right-hand column.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
Restore (iOS only)
Having backed up your device, and rescued all the media from it that you can, you should now restore the device from the backup that you took earlier to ensure that the device is properly associated with this new library. Right-click on it (control-click on a Mac) in the left-hand column of the iTunes window and click Restore from Backup...
Sync
Set up your preferences for syncing Music, TV Shows, Podcasts, Info etc. then click Sync. For a device that holds calendar or contact information you should be prompted to restore or merge. Click merge to copy this information into your computer. Your device is now properly associated with your new library and you shouldn't have lost any data.
Backup your library
For the future you should backup your library to a separate hard drive or network share as restoring a backup is much easier than the process above. The user tip Backup your iTunes for Windows library with SyncToy gives a suggested way of doing this effectively for Windows users. Mac owners can make use of Time Machine, or useCarbon Copy Cloner which does a similar job to SyncToy.

This is the ipod touch forum.
Try posting in the ipod nano forum.

So a week after i updated iOS 8 my wifi won't connect other devices will, i am unable to get to a apple store since where i live doesn't have them. this is the second time iPod has done something like this. I've tried restarting it and everything

so i tried to restart the iPod, 'forget' the wifi name and re join nothing happened. i also did the reset network connection. as i said please give me something i can do via macbook or home since i live no where near a apple store. Last year my iPod shut off and wouldnt work this now is happening. Do i have to restore?? and how can i save everything from deleting....??

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My phone lost connection... it says SEARCHING... i delet all info to see if it work and now i cant seem to take the searching away or configurated... PLEASE HELP...!

i need some help pleaseeeeee, i think i ruin my phone....
im from panama, my phone i got it in usa, when it goy here (to panama) i had to buy a regular sim card from the phone company, it was working perfectly fine, but then a few days ago the signal got lost and it says SEARCHING... i though it was the sim card that wasnt working so i got a new one yesterday and still did not work, so i thought that if i erease everything and start the configuration all over it was going to make it work, but now is worse cause the phone doesnt let me do the configuration it says in the screen that the phone cant be configurated cause the server is not available.... so now i dont know what to do and the worse part is that the SEARCHING... is still on...please please tell me what do i need to do in oprder for me to fix this...
(sorry for my writing, i am a latin girl)
thanks
Aura Reyes

Hello AuraReyes,
It sounds like your phone is having trouble connecting to your cellular providers network. Take a look at this article I found for you named:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
Symptoms
iPhone may display one of the following symptoms in the status bar:
Displays No Service or Searching in an area of good coverage
Does not regain service when returning to an area of coverage
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue. Test after each step.
Try turning iPhone off and then on again.
Remove the SIM card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Check for a carrier settings update. Tap Settings > General > About while connected to a Wi-Fi network. If an update is available, a prompt should appear soon. If Wi-Fi is not available, connect your device to iTunes.
Update your iPhone to the latest version of iOS.
Restore the iPhone.
If you're still experiencing No Service issues, contact your carrier to check for any network or account issues that could cause this issue.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Lost connection to airport express

I changed the password on my router for my wireless internet connection today, and have now lost connection with the airport express.
WHen I go to Airport Utility it is no longer showing the Airport EXpress as one of the connected devices.
I have unplugged the Express, done a hard reset on it. I have restarted my Macbook Air, but nothing assists me in Airport Utility picking up the additional device. Should I connect the Airport Express with an ethernet cable maybe to get everything working again?
Hope someone can assist me as I now have no music in the house

Problem solved. Mystery remains. but problem solved

AP lost connectivity to WLC

My understanding was that an LAP that has lost connectivity to its WLC should continue to work... At least as long as it is not rebooted. I have had a situation where a WLC went down and we lost wireless connectiviy completely.
Can anyone shed shome light on what should happen whan a LAP losses access to its WLC?

One more step further on what Stephen said;
If you are running authentication security on the ssid such as ldap or radius then only users who are already authenticated will remain able to use the wireless. Clients trying to connect to the wireless during the controller loss will not be able to authenticate & thus not have wireless access.
With one caveat;
If you place an authentication device at the remote location as well then they too can also authenticate and use the wireless.

Lost connection in Adobe Flash Player Installer

Everytime I try and install flash player, the Adobe Fash Player Installer runs fine until i get to the "downloading" part. It always gets stuck at 7% on this step and then says "lost connection. trying to reconnect", then it says "connection failed. Unable to complete Install". I have tried power cycling the device, using multiple browsers, uninstalling flash and downloading the newest version installer, nothing in trouble shooting has helped. Screenshots below. Please help!
Thanks!

Mike M,
I was experiencing this issue with watching videos using the flash player on my MAc. When i was trying to install the update i ran into another issue which i explained to you in the previous email. you were able to resolve that issue and i have updated flash player. After updating flash player, i am still having the issue. you can see that i have replicated the issue in two different browsers in the screenshots below. Do you have any suggestions on how to watch videos using the flash player??
Thank you for your assistance on the first issues
-Andrew Adams
PS. Have you seen The Fugitive?

How do I fix lost connection between Photoshop and Dreamweaver CS4?

How do I fix the lost connection in Photoshop CS4 to Dreamweaver? When I save for web and devices, Photoshop doesn't save for web but instead saves to the original file in Photoshop. The image doesn't show up in Dreamweaver's image gallery at all. Do I remove both from my hard drive and reload both? I don't want to loose anything in Dreamweaver or Photoshop.

Not sure exactly what you are asking since I am still a student learning Dreamweaver so I can only describe what is happening in non-technical terms. I have set up files in Photoshop CS4 for images that I plan to use in Dreamweaver as a gallery of thumbs that enlarge using the Behavior panel. I did this with over 100 images, first creating the correct size in Photoshop, then going to Save for Web and Devices, saving, and the image would then show up in my images list in Dreamweaver.
Now, when I save for Web and Devices, save, it doesn't show up in Dreamweaver. Instead, it saves it back into my original Photoshop file with hyphens between each word.
I have Windows XP Professional, Adobe Creative Suite CS4.
I don't know how this glitch happened, I did nothing different and have used the process successfully already over and over. I read as much as I could understand on the Adobe website and apparently glitches do happen but I don't understand how to resolve this. Do I uninstall both Photoshop and Dreamweaver, and reinstall both?
I very much appreciate assistance!
Sieglinde Anderson

Lost connection to device

Similar Messages

Maybe you are looking for