Lost connection to Westell router after Airport Extreme Update

I've looked through the discussions and have seem similar issues but haven't found one that I could say "that's it!"
I use the airport card in my MacBook OS X 10.4.11 to wirelessly connect to my Westell versalink router and have done so for over a year. I don't have an AEB. During updates, I left the airport extreme update checked. Why? I probably wasn't paying enough attention.
So now I cannot connect at all - at home. It's stating that my password is incorrect. I can connect at work; no password is required.
I went to the Westell website and changed my Network (SSID) name and password. Now, I'm picking up this new network but I'm still being told the password is incorrect.
Can I uninstall the Airport Exteme Update (and pray that it works) or is that too easy an answer?

You are not alone, have a look at this thread:
http://discussions.apple.com/forum.jspa?forumID=1015&start=0
Unfortunately, it appears that the 2007-02 update has broken Airport running on Macbooks and Macbook Pros that attempt to access wireless routers using WPA. I've spent a lot of time looking for a solution, and at this point there appears to be no reasonable fix until Apple corrects this serious flaw. If you have AppleCare, perhaps a phone call to them would help them become more aware of the situation. Until they do, many of us are without the use of Airport, particularly where it is not possible to switch off WPA in a shared environment (such as my office).

Similar Messages

  • Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

    Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

    So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
    Other questions that may help me (or somebody else) understand your problem better:
    Which of the pieces were verified as working before the introduction of the AirPort Extreme?
    Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
    Are you using the same port on the GT704WGB? Have you tried another one?
    If the desktop has multiple ethernet ports, are you using the same one?
    Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
    What category ethernet cable are you using? 3? 5? 5e? 6?

  • Wireless networking fails after AirPort Extreme Update 2007-003

    I have just tried installing AirPort Extreme Update 2007-003 on a MacBook Pro and wireless networking, which used to work, now no longer works.
    My wireless network consists of the MBP and a Thomson Speedtouch 585 ADSL modem/router.
    The symptom is that no connection can be obtained - the Airport menubar item flashes continually about once a second, as does the WLAN activity light on the 585.
    The Console.log reports (repeatedly) that "configd crashed" and the corresponding information in /Library/Logs/CrashReporter/configd.crash.log says that:
    "Command: configd
    Path: /usr/sbin/configd
    Parent: launchd [1]
    Version: ??? (???)
    PID: 473
    Thread: 1
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0xb1e0cf60"
    (There is a lot more diagnostic info - which I can supply if it helps)
    All system software is up to date (Tiger 10.4.9) - I had just run the system updater.
    If I disable Airport (i.e. wireless networking) and connect the MBP to the 585 by Ethernet, then it all works fine.
    Something similar happened to my system about 4 weeks ago - I got around it that time by rerunning the MacOS 10.4.9 Combo update - but this time that doesn't work.
    Any suggestions on why configd is crashing and how to stop it?
    MacBookPro 15" Core Duo   Mac OS X (10.4.9)  

    Thanks for your help
    Curiouser & curiouser!
    My answer was going to be that keychain had nothing to do with the problem. If I log in as a different user (even a freshly-created one), I still get the same symptoms. I was also getting the same symptoms with a rescue copy of 10.4.9 on an external hard disk.
    However, I thought I would have a look at my keychain using the Keychain Access utility (which, I seem to remember, has some recovery/repair functions). Lo and behold, the Keychain Access utility crashes after about 2 seconds and the crash report in ~/library/logs looks similar to one for configd. Here is a sample:
    <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    Host Name: Wombat
    Date/Time: 2007-05-06 23:08:16.114 +0100
    OS Version: 10.4.9 (Build 8P2137)
    Report Version: 4
    Command: Keychain Access
    Path: /Applications/Utilities/Keychain Access.app/Contents/MacOS/Keychain Access
    Parent: WindowServer [71]
    Version: 3.3.2 (27693)
    Build Version: 64
    Project Name: KeychainAccess
    Source Version: 276930000
    PID: 2302
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0xc3110ce0
    Thread 0 Crashed:
    0 libstdc++.6.dylib 0x90b4441a cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void const*, _cxxabiv1::__class_type_info::__upcastresult&) const + 54
    1 libstdc++.6.dylib 0x90b4442e cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void const*, _cxxabiv1::__class_type_info::__upcastresult&) const + 74
    2 libstdc++.6.dylib 0x90b43fb7 cxxabiv1::__class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void**) const + 69
    3 libstdc++.6.dylib 0x90b43c27 cxxabiv1::__class_type_info::__do_catch(std::typeinfo const*, void**, unsigned) const + 57
    4 libstdc++.6.dylib 0x90b42d45 _cxa_getglobals + 351
    5 libstdc++.6.dylib 0x90b4342a _gxx_personalityv0 + 658
    6 libgcc_s.1.dylib 0x90bd7acb UnwindRaiseException + 147
    7 libstdc++.6.dylib 0x90b43747 _cxathrow + 87
    8 com.apple.security 0x9117319b Security::CssmError::throwMe(long) + 91
    9 com.apple.security 0x911750e3 Security::KeychainCore::KCCursorImpl::next(Security::KeychainCore::Item&) + 123
    10 com.apple.security 0x91174f1d SecKeychainSearchCopyNext + 125
    11 com.apple.keychainaccess 0x00009456 0x1000 + 33878
    12 com.apple.keychainaccess 0x00008f18 0x1000 + 32536
    13 com.apple.keychainaccess 0x00008beb 0x1000 + 31723
    14 com.apple.keychainaccess 0x0000874a 0x1000 + 30538
    15 com.apple.keychainaccess 0x000085ad 0x1000 + 30125
    16 com.apple.keychainaccess 0x00008477 0x1000 + 29815
    17 com.apple.keychainaccess 0x00007db7 0x1000 + 28087
    18 com.apple.Foundation 0x927df17b nsnotecallback + 230
    19 com.apple.CoreFoundation 0x908573e6 __CFXNotificationPost + 345
    20 com.apple.CoreFoundation 0x9084ebd1 _CFXNotificationPostNotification + 600
    21 com.apple.Foundation 0x927d7724 -[NSNotificationCenter postNotificationName:object:userInfo:] + 121
    22 com.apple.keychainaccess 0x0000322c 0x1000 + 8748
    23 com.apple.Foundation 0x927de6c9 -[NSNotificationCenter postNotificationName:object:] + 55
    24 com.apple.keychainaccess 0x0000340c 0x1000 + 9228
    25 com.apple.AppKit 0x93281e94 -[NSApplication _postDidFinishNotification] + 124
    26 com.apple.AppKit 0x93281d7e -[NSApplication _sendFinishLaunchingNotification] + 67
    27 com.apple.AppKit 0x9328187d -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 273
    28 com.apple.AppKit 0x93281448 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 96
    29 com.apple.Foundation 0x927e4e65 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 447
    30 com.apple.Foundation 0x927e4c8f _NSAppleEventManagerGenericHandler + 91
    31 com.apple.AE 0x9151afb5 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 147
    32 com.apple.AE 0x9151aee6 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
    33 com.apple.AE 0x9151adb2 aeProcessAppleEvent + 190
    34 com.apple.HIToolbox 0x92ddc0e4 AEProcessAppleEvent + 37
    35 com.apple.AppKit 0x9327f63d _DPSNextEvent + 1044
    36 com.apple.AppKit 0x9327f056 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 137
    37 com.apple.AppKit 0x93278ddb -[NSApplication run] + 512
    38 com.apple.AppKit 0x9326cd2f NSApplicationMain + 573
    39 com.apple.keychainaccess 0x00003146 0x1000 + 8518
    40 com.apple.keychainaccess 0x00014755 0x1000 + 79701
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0xc3110ce0 ebx: 0x90b436fd ecx: 0xbfffead0 edx: 0xa11a6680
    edi: 0x003d1be0 esi: 0xa11a66c0 ebp: 0xbfffea98 esp: 0xbfffea80
    ss: 0x0000001f efl: 0x00010287 eip: 0x90b4441a cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    Binary Images Description:
    0x1000 - 0x46fff com.apple.keychainaccess 3.3.2 (27693) /Applications/Utilities/Keychain Access.app/Contents/MacOS/Keychain Access
    0x8fe00000 - 0x8fe4afff dyld 46.12 /usr/lib/dyld
    0x90000000 - 0x90172fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x901c2000 - 0x901c4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
    0x901c6000 - 0x90203fff com.apple.CoreText 1.1.2 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
    0x9022a000 - 0x90300fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x90320000 - 0x90775fff com.apple.CoreGraphics 1.258.61 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x9080c000 - 0x908d4fff com.apple.CoreFoundation 6.4.7 (368.28) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x90912000 - 0x90912fff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x90914000 - 0x90a07fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
    0x90a57000 - 0x90ad6fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
    0x90aff000 - 0x90b63fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
    0x90bd2000 - 0x90bd9fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
    0x90bde000 - 0x90c51fff com.apple.framework.IOKit 1.4.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x90c66000 - 0x90c78fff libauto.dylib /usr/lib/libauto.dylib
    0x90c7e000 - 0x90f24fff com.apple.CoreServices.CarbonCore 682.21 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x90f67000 - 0x90fcffff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x91007000 - 0x91045fff com.apple.CFNetwork 129.20 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x91058000 - 0x91068fff com.apple.WebServices 1.1.3 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
    0x91073000 - 0x910f1fff com.apple.SearchKit 1.0.5 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x91126000 - 0x91144fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
    0x91150000 - 0x9115efff libz.1.dylib /usr/lib/libz.1.dylib
    0x91161000 - 0x91300fff com.apple.security 4.5.2 (29774) /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x913fe000 - 0x91406fff com.apple.DiskArbitration 2.1.1 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    0x9140d000 - 0x91414fff libbsm.dylib /usr/lib/libbsm.dylib
    0x91418000 - 0x9143efff com.apple.SystemConfiguration 1.8.6 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x91450000 - 0x914c6fff com.apple.audio.CoreAudio 3.0.4 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x91517000 - 0x91517fff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x91519000 - 0x91544fff com.apple.AE 314 (313) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
    0x91557000 - 0x9162bfff com.apple.ColorSync 4.4.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x91666000 - 0x916d9fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0x91707000 - 0x917b0fff com.apple.QD 3.10.24 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x917d6000 - 0x91821fff com.apple.HIServices 1.5.2 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x91840000 - 0x91856fff com.apple.LangAnalysis 1.6.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x91862000 - 0x9187cfff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
    0x91886000 - 0x918c3fff com.apple.LaunchServices 182 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
    0x918d7000 - 0x918e3fff com.apple.speech.synthesis.framework 3.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x918ea000 - 0x91929fff com.apple.ImageIO.framework 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
    0x9193c000 - 0x919eefff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
    0x91a34000 - 0x91a4afff libcups.2.dylib /usr/lib/libcups.2.dylib
    0x91a4f000 - 0x91a6dfff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
    0x91a72000 - 0x91ad1fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
    0x91ae3000 - 0x91ae7fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
    0x91ae9000 - 0x91b6dfff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
    0x91b71000 - 0x91baefff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
    0x91bb4000 - 0x91bcefff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
    0x91bd3000 - 0x91bd5fff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
    0x91bd7000 - 0x91cb5fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
    0x91cd2000 - 0x91cd2fff com.apple.Accelerate 1.3.1 (Accelerate 1.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    0x91cd4000 - 0x91d62fff com.apple.vImage 2.5 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
    0x91d69000 - 0x91d69fff com.apple.Accelerate.vecLib 3.3.1 (vecLib 3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
    0x91d6b000 - 0x91dc4fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    0x91dcd000 - 0x91df1fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    0x91df9000 - 0x92202fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x9223c000 - 0x925f0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    0x9261d000 - 0x9270afff libiconv.2.dylib /usr/lib/libiconv.2.dylib
    0x9270c000 - 0x92789fff com.apple.DesktopServices 1.3.6 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x927ca000 - 0x929fafff com.apple.Foundation 6.4.8 (567.29) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x92b06000 - 0x92b10fff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
    0x92b14000 - 0x92b2bfff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
    0x92b36000 - 0x92b8efff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
    0x92ba2000 - 0x92ba2fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x92ba4000 - 0x92bb4fff com.apple.ImageCapture 3.0.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x92bc3000 - 0x92bcbfff com.apple.speech.recognition.framework 3.6 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x92bd1000 - 0x92bd6fff com.apple.securityhi 2.0.1 (24742) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    0x92bdc000 - 0x92c6dfff com.apple.ink.framework 101.2.1 (71) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x92c81000 - 0x92c84fff com.apple.help 1.0.3 (32.1) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x92c87000 - 0x92ca5fff com.apple.openscripting 1.2.5 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x92cb7000 - 0x92cbdfff com.apple.print.framework.Print 5.1 (192.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x92cc3000 - 0x92d26fff com.apple.htmlrendering 66.1 (1.1.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    0x92d4a000 - 0x92d8bfff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    0x92db2000 - 0x92dbffff com.apple.audio.SoundManager 3.9.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    0x92dc6000 - 0x92dcbfff com.apple.CommonPanels 1.2.3 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x92dd0000 - 0x930c5fff com.apple.HIToolbox 1.4.9 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x931cb000 - 0x931d6fff com.apple.opengl 1.4.16 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x93266000 - 0x93266fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x93268000 - 0x9391efff com.apple.AppKit 6.4.8 (824.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x93c9f000 - 0x93d1afff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
    0x93d53000 - 0x93e0dfff com.apple.audio.toolbox.AudioToolbox 1.4.5 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x93e50000 - 0x93e50fff com.apple.audio.units.AudioUnit 1.4.2 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x93e52000 - 0x94013fff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x94059000 - 0x9409afff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
    0x940a2000 - 0x940dcfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
    0x940e1000 - 0x940f7fff com.apple.CoreVideo 1.4 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
    0x94211000 - 0x94222fff com.apple.securityfoundation 2.2.1 (28150) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x94230000 - 0x9426efff com.apple.securityinterface 2.2.1 (27695) /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
    0x9428a000 - 0x94299fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
    0x942a0000 - 0x942abfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    0x942f7000 - 0x94311fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    0x949f2000 - 0x94a0ffff libresolv.9.dylib /usr/lib/libresolv.9.dylib
    0x94bbb000 - 0x94c93fff edu.mit.Kerberos 5.5.24 /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
    0x95b86000 - 0x95b8afff com.apple.URLMount 2.1.7 /System/Library/PrivateFrameworks/URLMount.framework/Versions/A/URLMount
    0x9742b000 - 0x9746afff com.apple.AppleShareClientCore 1.5.2 /System/Library/Frameworks/AppleShareClientCore.framework/Versions/A/AppleShare ClientCore
    So it looks as if something is messing up my keychain (all my keychains?) and that in turn crashes both configd and keychain access.
    Do you have any suggestions on where to go from here? There are two issues:
    How to stop keychain getting corrupted again?
    How to repair the corrupted keychain if I can't use Keychain Acess? - can you just delete the keychain file and then re-enter passwords as and when necessary?
    Meanwhile I can experiment with reloading my rescue copy of 10.4.9. If this fault is reproducable, then I guess I ought to file a bug report with Apple

  • How to connect a ADSL router to AirPort Extreme?

    Hallo,
    my local internet service provider forces all costumers to use their modem/router to connect to the Internet using a DSL connection.
    I have one external public IP (v4) and the router has an editable IP for the LAN set to 192.168.1.1 .
    The ISP router can act as DHCP server and NAT; I can disable the DHCP.
    What I would like to do is connect it to the Airport Extreme WAN port and give all the control to the Airport extreme: I want to use his DHCP server, NAT, port forwarding etc.
    My problem is that I am able to have Internet connection only if the ISP router has DHCP control and Airport Extreme is set to Bridge mode.
    In this configuration, in the Airport Internet configuration panel, the connection is set to Ethernet, IPv4 is using DHCP, Airport IP is 192.168.1.133 and the ISP router has 192.168.1.1 . I also have the DNS IPs set to the ones suggested by the ISP and Bridge mode.
    In this way it works: all computers can share Internet connection.
    What I am trying to do is:
    - disable DHCP in the ISP router;
    - in the Airport extreme Internet panel I choose to manually setup IPv4 and I type the same vales it is getting when set to DHCP mode: 192.168.1.133 for the Base and 192.168.1.1 for the router using the ISP dns and I select Share pubblic IP. In the DHCP panel I choose 10.0.1 class.
    I save changes and... I got that Internet is no working anymore and I cannot access the ISP router control panel.
    Does anybody have suggestion about things to try to not use ISP router DHCP or configuration changes I could try?
    Thanks in advance for any help about it!

    Thanks for the reply,
    at the end it seems that my airport extreme works too BUT with an error message saying "double NAT" and the front led turned to yellow. I have ignored such error because things seems to work and so the led color goes to green.
    What I had to do here is:
    - set previous router to IP 192.168.1.1
    - turn off DHCP on my previous router;
    - leave on the NAPT (NAT) service on previous router and set it with start and stop address to the same IP I am using for the Airport Extreme (192.168.1.100);
    - open all ports and services on previous router by faking the mac address of the Computer's NIC I was using to configure router. I say faking because previous router wants to know for which computer the ports have to be open, so I had to use the same mac address of the Airport extreme. I cannot type it, previous router will get it automatically when configuring it.
    - on the Airport Extreme, Internet side, I had to manually configure Internet options using Ethernet mode: I set the IP 192.168.1.100 for the Airport base. Then I have enabled DHCP on class 10.0.1.x .
    Airport extreme seems to work with all features now, I hope that "double NAT" warning will not create any trouble. Anybody knows about that?

  • Loosing internet connecti when removing router from airport extreme network

    Hello. I have an older airport extreme: the alien one. For years I have had the following setup:
    Modem --> Belkin Router --> Airport Extreme --> wireless signal to macbook and hardwire line to mac pro. There is also an airport express downstairs acting as a relay to boost my wireless signal. At the time i did it I had other computers so i needed the router to distribute the internet signal. I no longer need the extra capacity as I now only have a wireless macbook and a wired mac pro. Unfortunately when I disconnect the Router and connect the modem directly to the airport I no longer get internet service at either computer. I can't figure it out. The Airport Extreme is already sending all the signals to the two computers...the router is just sitting in the middle doing ostensibly nothing at all. Why, when I take it out of the loop does everything stop working? Thank you!!

    Welcome to the discussion area!
    Your AirPort Extreme was configured in "Bridge Mode" when it was used with the Belkin router.
    Since the Extreme is now the main router, you must configure the Connection Sharing setting for "Share a public IP address".
    If you are still using Tiger 10.4.x as your profile indicates, you may still have the application that came with this operating system...AirPort Admin Utility. I cannot remember back 4-5 years to tell you much about this.
    If you have upgraded to Leopard or Snow Leopard, you'll use AirPort Utility.
    I can help you if you have AirPort Utility. Post back if you need help.

  • HT1218 after airport extreme update 7.6.1, i can nolonger connect via iphone 4s

    I just got this airport extreme not too long ago... took a few sleepless nights to finally get it all sorted. after the 7.6.1. update all iphones in my house stopped
    responding. no more wifi connections doesnt matter what i do. it can actually link to the airport but cannot get online...... seems to work fine with my ipad2.
    i've tried almost everything including turning off security. please help!

    Some people are having the same issue.  Revert to 7.5.2 which seems to be the most stable one.  If you haven't had any issues with 7.6.0, that be okay too.  Apple haven't put out any update to fix some of these connectivity issues yet.  So, be patient... And god luck!

  • Airport Problems after "AirPort Extreme Update 2008-001" (1.0)?

    I recently installed the update and have been unable to connect to my wireless network at home ever since. The airport detects my router and asks if I would like to join the network, but after I click yes, it says "there's an error in connecting", and thus no connection is made.
    I can, however, get internet connection through ethernet from my router.
    I can't be totally sure the update is the cause of the problem, but I haven't downloaded or installed anything else recently, and all other pc's wireless connections work fine with my router. I also haven't tried connecting through other wireless networks, so I'm not sure if the problem is exclusive to my router.
    Has anyone else had similar problems after the update?
    Also, does anyone know the default settings for the airport? I'm wondering maybe I have altered settings that's causing this problem.
    Any help is greatly appreciated

    I have the same problem but I have not found a fix.

  • Should I disable the wireless capabilities of my Bigpond modem/router when Airport Extreme is connected?

    Should I disable the wireless capabilities of my Bigpond modem/router when Airport Extreme is connected? I'm told that it's better to only use the WiFi capabilities of the Extreme and leave the Bigpond to feed to the extreme.

    No, bridge mode would not be the correct setting for this.
    Instead, look for a "wireless settings" tab or page that will provide the option to turn off or disable the wireless radio of the BigPond router.
    If you are still having difficulty, it would be a good idea to post your question on a BigPond support forum or contact your Internet Service Provider.
    Contact Technical Support - BigPond

  • How to connect a hard drive on Airport Extreme (second edition)

    how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

    The USB port your Mac is high powered. The port on the AirPort Extreme is not.
    So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
    Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
    You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
    Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

  • HT4262 How can I connect 6 computers simultaneously to Airport extreme?

    I have tried troubleshooting several ways and the some computers work and others don't. How can I connect 6 wireless computers to Airport Extreme?

    Matt
    Is it possible to speak on the phone?  The situation is so convoluted it might be easier to help me get back on track in person. When I first had this issue I got on an apple site that had a chat room in which I typed in my problem.  After several missives back and forth, the apple technician asked for my number and we spoke on the phone. The technician walked me through rebooting the actual airport plug (as opposed to the router box) and got me up and running. Do you know how I can relocate that chat site for technical support?
    Thanks
    David

  • Airport Utility not recognizing Time Capsule after Airport Extreme Update08

    After installing the Airport Extreme Update 2008 my Time Capsule keeps crashing. I have powered down both my DSL modem and the Time Capsule, done a hard reset of the Time Capsule and yet it continues to flash amber lights. Yesterday, after hours of resetting everything and finally getting a green light and an internet connection, today my network and all of the airport setting have completely disappeared. Is anyone else having this problem and if so, have you found a solution? Is there a way to uninstall this updates as I believe it has caused these issues?

    Josto,
    Unfortunately, you are not the only one:
    Latest OS X Airport update Broke connectivity
    [http://discussions.apple.com/thread.jspa?threadID=1771190&tstart=0]
    *_Contact Apple For Support Issues_*
    If you are continuing to experience issues, make sure you contact Apple. They do not look at these forums to gauge the extent of issues. You need to contact them or they will never know.
    Phone:
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    Feedback:
    "Tell us how we’re doing. Select the appropriate feedback option (we read everything, but can’t always respond):"
    [http://www.apple.com/feedback>
    *Genius Bar:*
    "An Apple Store Genius Bar is the place to go for advice, hands-on technical support, and hardware repair from a Mac Genius." Find your store and make a reservation at this link:
    [http://www.apple.com/retail>
    Cheers!

  • Problems after installing Airport Extreme Update 2008-001

    ever since I installed the Airport Extreme update 2008-001 my internet connection has been dropping and it's so frustrating. I normally wait and don't install updates immediately after they are released. I installed this one and now my internet connection keeps dropping.
    Anyone have any suggestions??

    Same scenario here, though I'm running 10.4.9. on a Mac Pro. I've tried every known fix, but Safari still stalls every few minutes - taking upwards of a minute to continue loading whatever page I was browsing to.
    Other apps, including Mail, Firefox, and Remote Desktop screen sharing aren't affected - I can ping away without issue while Safari is choking, and there is no unusual Safari CPU consumption in Activity Monitor
    Mac Pro Mac OS X (10.4.9)

  • Connecting Time Capsule wirelessly to Airport Extreme

    Hello,
    I have just purchased a Time Capsule v7.3.1. I am trying to have my Airport Extreme connect wirelessly to my Time Capsule and then use the ethernet connection "wired" to my Xbox. I am unable to get an ethernet address that works when connected via ethernet. I had two Airport extreme's previously connected via wireless and had my Xbox connected via Ethernet on my one Extreme and things worked fine. It seems that my Time Capsule when connected via wireless to my Airport Extreme isn't getting a valid ethernet DHCP address and I cannot get it to work. When I use the wireless connection on my Airport Extreme it seems to work fine when I access the wireless connection to the Airport Extreme. However, wired does not.. Time Capsule

    your secondary router should be placed using the manual button once Airport Utility is launched in "bridge" mode. then configure your ethernet and wireless.

  • Using ARD remotely connecting to work computer with Airport Extreme...

    So I've looked through the forums, over the interwebs, through the ARD PDF manuals online and I'm coming up short. Ugh.
    I want to connect from my home laptop to my desktop at my small business where we're using an Airport Extreme for a router. I can NOT figure out how to get this configured to work. We use ARD within the business, so on the same network, no problems. With the router, I'm guessing I need to get the computer setup to have a locked in IP and whatnot but no where can I find the instructions that tell me EVERTHING I need to do. Can someone here point me in the right direction please or hit me over the head with a 2x4 of exact instructions!
    Thanks for your time! Shawn

    Hi Shawn,
    So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
    That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
    If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
    Also these steps are so one person, can connect to one computer at your work.
    Open Airport Utility:
    go to the dock
    Click on the finder
    go to the menu bar
    Click on the "Go" menu
    Chose "Utilities" from the "Go" Menu
    double Click on "AirPort Utility"
    Access the Base Station:
    Double Click on your Airport Extreme BaseStation that is your internet connection router.
    a new window should pop up with your Airport Base Station as the Window Name
    Configure Static Address for the computer you want to connect to via ARD:
    Click on the internet Icon from the toolbar
    Click on the "DHCP" tab
    For "DHCP Reservations:"  Click on the "+" button
    For the "Description" put "ARD"
    For "Reserve Address by:"  set "DHCP Client ID"
    Click the "Continue" button
    For "DHCP Client ID:" set "ARD"
    write down the number in "IPv4" address field
    Click the "Done" Button
    Configure routing to ARD computer:
    Click on the "Advanced" icon from the tool bar.
    Click on the "Port Mapping" tab
    Click on the "+" button
    for "Service:" Chose "Apple Remote Desktop"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
    Click the "Continue" button
    Click the "Done" button
    Click the "+" button
    For the pulldown menu "Service:" Chose "Remote Apple Events"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
    Click the "Continue" button
    Click the "Done" button
    Click the "+" button
    For the pulldown menu "Service:" Chose "Remote Login - SSH"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
    Click the "Continue" button
    Click the "Done" button
    Click the "Update" button.
    wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
    Configure the ARD computer to use the correct IP address:
    Go to the computer you want to be able to remotely connect to
    On that computer, Go to the menu bar
    Chose the "Apple" menu bar
    Chose "System Preferences…"
    Click on the "Show All" button
    Click on the "Network" icon
    For the active network connection, (the connection on the left side with the green dot), click on it
    Clock on the "Advanced…" button
    Click on the "TCP/IP" tab
    for the "DHCP Cient ID: field put "ARD".
    Click the "OK" button
    Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
    Find out what your public internet IP address is.
    On the computer you wish to connect to over the internet, goto http://whatismyipaddress.com/
    when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
    At this point you should be able to connect to the computer remotely
    connect to the internet from another location.
    open Apple Remote Desktop
    go to the file menu
    chose connect to computer using ip address
    set the address to the address to the IP address you wrote down for step 6. 2.
    use the same password as you used to connect to the computer at work using ARD.
    So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
    Also some network connections change.  When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
    Of corse there are ways around this. But that's kind of another conversation.
    Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
    ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
    This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

  • Airport Extreme Update 2007-002 broke my connections

    I was working properly with my brand new MacBook. I was able to connect to my ADSL router using a wireless connection perfectly.
    Unfortunately, after installing the Update 2007-002 everything colapsed. Now, I cannot connect to any network.
    I have tried to connect to a non-secured network and it doesn't work. I have tried to connect to a 64 bits WEP secured net and it doesn't work. Then, I tried with a 128 bits WEP secured net, and it also doesn't work.
    The point is that the networks are visible i.e. I can select them, but after a few secods I get the answer <<there was an error joining the AirPort network "networkname">>.
    I'm very upset with this. Is it normal?.
    If anybody has some ideas or suggestions for solving the problem, please... post them.
    Thanks everybody in advance.

    Hi,
    The next article is really interesting but It has been useless to me. http://www.macfixit.com/article.php?story=20070309093714978
    I have tried almost everything and nothing worked.
    I even tried to remove the update by doing the next:
    1. Download the most recent version of Mac OS X for Intel (10.4.8) but do not install it.
    2. Download and install the shareware application Pacifist
    3. Drag the Mac OS X 10.4.8 installer package onto the Pacifist application icon.
    4. Click the triangle next to "System" to expand it
    5. Click the triangle next to "Library" to expand it
    6. Click the triangle next to "Extensions" to expand it
    7. Scroll down and find the file IO80211Family.kext. Drag it to your Desktop or another location (you will have to enter your administrator password)
    8. On your Mac OS X startup drive, navigate to /System/Library/Extensions and locate a similarly named file (IO80211Family.kext). Move it to another location for safe keeping.
    9. Now drag the file from step 7 (the one that you retrieved from the Mac OS X 10.4.8 install package) into the /System/Library/Extensions, in effect replacing the newer file (installed by the AirPort updater) with and older copy -- you will have to enter an administrator password.
    10. Restart your Mac
    But after doing this, the OS wasn't able to find the airport card, so no connectivity existed.
    At the end, in order to have some kind of connectivity I re-installed the 2007-002 and now I'm again like I was before removing it.
    I cannot update the firmware of my router because I don't know the exact model (I bought it within a ''kit'' of a telecom enterprise, and they remove this information from the device).
    Any new idea, will be appreciated.

Maybe you are looking for