Lost Connection - Unable to Connect to Server
PS Touch 1.7.0 on an iPad running iOS 8.1 with a paid CC subscription. PS Touch will not sync, will not show my storage level on Creative Cloud, and when attempting to load a photo from my CC, I get "Lost Connection - Unable to Connect to Server". I tried all the suggested fixes (clearing sync databases all over the place, multiple uninstall/reinstall cycles, etc.) on this board to no avail.
Since all my other CC-enabled mobile apps work, as do the desktop apps on my Windows desktop and MacBook Pro laptop, I have to believe this is on the server side at Adobe. Of course, this being Adobe, nothing but silence. Completely unacceptable - the app may only be $10, but the connected service is $600/yr.
It is morning on November 15 and I started the Photoshop touch app to see what it's current status was. I was pleased to see that the storage level usage indicator was no longer blank. Then I turned on the sync function and watched to my horror as every project of which there are many was removed from the app. Next to my surprise all the projects were loaded into the app. Just when I began to think everything was fixed all the projects were deleted from the app. I logged on to my creative cloud account and discovered that all the projects were still in the cloud. These projects represent several years and hours and hours of work. While the creative cloud continues to contain all of the projects the app is now stuck in a mode where the app deletes all the projects and then downloads all the projects and then deletes all the projects and then downloads all the projects etc. in a continuous and never ending cycle. Needless to say this is quite nerve-racking and frustrating. Adobe support are you out there? What is going on with the Photoshop touch app and the creative cloud sync function? I thought the situation was bad before today. But Adobe somehow managed a new element in providing an unreliable service. Please, please resolve this problem.
Similar Messages
-
Deploy, IIOP connection, Unable to connect to Oracle 8i using IIOP
Hi,
I have a working JDBC connection to my Oracle 8i Enterprise DB server but when i try to establish a IIOP connection to the same server i get the following error message:
"Can4t find resource for bundle oracle.aurora.jndi.sess_iiop.Messages, key UNKNOWN_SERVICE:default"
The connection params are as follows:
JDBC4s URL jdbc:oracle:thin:@leobeln:1521:Prueba
IIOP4s URL
sess_iiop://leobeln:2481:Prueba
Same user for both connections: scott
Some ideas ?
TIA,
PPedro
If you haven't done so already, I suggest you try to establish the IIOP connection using JDeveloper's connection manager.
You can use Net8 assistant to check that you have a port set up to receive IIOP connections. Instructions are in the Net8 administrator's guide; in the Oracle 8.1.6 documentation it's in chapter 7, "Configuring the Listener", under the subheading "Configuring Listening Addresses for Oracle8i JServer". Check that you have a port set up to receive IIOP connections, and make sure that you're using that port number when setting up the IIOP connection in JDeveloper.
The Oracle8i documentation is available on this site - select Documentation from the menu on the left.
Blaise -
TS1398 Wifi connection unable to connect - existing network
My iPad lost network connection and will not sign back into the network. I have tried everything on TS 1398 and it will sign onto other networks, but no longer my home network. I know my network password and can get my other devices, including another iPad signed on. Thanks for any help you can offer.
Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Test Database Connection "Unable to connect to DB" using Oracle 10g Express
DB is up and running fine pls help
Connection test failed.
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:280)
oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:482)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:156)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:101)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
...After installing the JDBC driver and selecting the test configuration i am getting the below erro:
Connection test failed.
Message icon - Error Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:280)
oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:482)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:156)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:101)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
The Steps i followed to install the JDBC Driver are mentioned below:
1. JDBC Data Source Properties:
Name: testSample
JNDI Name: abc.xyz.testSample
Database Type: Oracle
Database Driver: Oracle’s (Thin XA) for Instance
connections; Versions: ... 11
Database Name: orcl
Host Name: wls-sysadm
Port: 1521
Database User Name: weblogic
Password and Confirm Password: Welcome1
Before that i started the database from start menu
and both the services
ORACLE service XE
and ORACLELISTNERSERVICE is up and running fine.
C:\Users\satish>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-JUN-2013 10:18
:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 04-JUN-2013 09:35:25
Uptime 0 days 0 hr. 43 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SATISH-PC)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Can anyone pls help...urgent -
Ipad Mini - Wifi Connection -Unable to connect
Ipad Mini with IOS 6.0.2 software current lost WIFI connection on Airport Extreme Base and now does not connect. See network connection to network, but looks like it is searching after password entered. Tried the guest network connection and does the same. It was connecting properly once I first activated ipad mini, but now does not connect at all. I tried rest of the ipad mini and does the same thing. Other Apple devices have no issues with connection to AEB. --- Need help with this.
Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Starting last night, after an update, I am no longer able to use Firefox.
"Problem loading page"
"Unable to connect"
Unable to connect"
Firefox can't establish a connection to the server at.....
I have tried various things, even uninstalled and re-installed, took it out of the firewall, and added it back in. But nothing is working.
Please help!
Thank You
MaraHello Mara, see if the next is helpful : [https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can Firefox can't load websites but other browsers can]
also, try to boot the computer in [http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) and check firefox again.
(If works in Windows Safe mode then probably you have problem with other software, like security software or maybe a system driver, that is running on your computer).
thank you -
Cant go through the setup process...unable to connect
I just recently purchased a z10 from someone, and because i didnt have the device password, i did a security wipe. after the security wipe, the phone isnt giving me the option to connect to a network! (message that i got is below)
Unable to connect
Unable to connect to a network.
Please try changing your settings
<<settings>>
Please assist me as soon as you can...Hi and Welcome to the Community!
You didn't say...what type of network? WiFi? Carrier data network? Something else? You should be able to configure without the SIM inserted as well, via WiFi only, if you simply bypass the carrier network screen.
Or, the OS may be corrupt somehow, and a reload might be needed. You can find instructions here:
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-to-Reload-your-Blackberr...
And here:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
iCloud keeps giving me unable to connect to server. Tho my Apple ID and password are correct. What should I do? I lost all my contacts need help
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings -
I have a 16GB iPod touch that suddenly stopped connecting to the internet last night. Everytime I try to get mail, or access anything with Safari I get a message saying that it can't connect to the server. Also I've plugged it in to my home computer but it won't connect to iTunes either. I haven't updated to iOS8 yet as I didn't have enough space for it and I had planned on deleting all my music files, updating the software and putting whatever music I could fit back on to the device afterward, but now I'm hesitant to do that as I have no way to get any of the files back onto the device. Could this be because I haven't updated to iOS8 yet? I've been having other problems such as apps crashing unexpectedly lately as well, for example my music shuts off randomly and apps such as Twitter and Tumblr and a few others crash on launch. I'm definitely not a genius when it comes to technology by any means, so I have no idea what's causing this problem or how to fix it, any help would be greatly appreciated!
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Unable to connect, server not responding
Hello,
We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
"Unable to connect - server not responding." Which I know is completely untrue after testing ping.
I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
"The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
I am lost here, any help or observations are highly appreciated.Hi kssi89, and a warm welcome to the forums!
Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
But, in this instance I think it's not even starting to.
Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist -
TS1368 I'm unable to connect to iStore thru a proxy server (port: 8080)
I connect to internet thru a proxy server (port: 8080) but I'm unable to connect to iStore or any most of the other applications. I would like to know what is the port no. thru which these apps operate? Pls help me connect...
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Unable to connect to Internet via Airport Express - 'cannot contact server'
I'm unable to connect to the internet via my Airport Express. I'm using OS 10.3.9, and had the same setup with no problems at a previous address, but with a different modem from the same ISP.
My AE is connected - the light is green - and my mac is connected to the network in Internet Connect. But when I open Safari I get an 'unable to contact server' message.
I've tried rebooting everything (modem, AE, Mac), and leaving modem/AE off for several minutes. Also reset the AE, but to no avail.
The connection works fine via Ethernet cable.
Any ideas?Thanks, I checked out that advice doc (106798), but could not connect to the address (http://17.149.160.49) which is given to test if it's a DNS issue. My ISP says I shouldn't need DNS settings.
The service is PPPoE, and I went into Airport Admin Utility to check if the Airport was configured for this. Under Configure/Internet, I found it was set to 'Ethernet', so changed it to PPPoE. Then when I restarted I got connection status in the bar (and good Airport signal), but status flipped between 'looking for PPPoE host' and 'negotiating PPPoE host', sometimes sticking on one or the other each time I tried rebooting all gear.
Any other ideas? -
i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.
Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds. -
'Unable to connect to database server' on local test server (CS4)
I am a php/MySql newb. Have designed static sites in DW since Macromedia DW 4 days.
I have set up a testing server on my Mac running OSX 10.6.7 using MAMP 1.9.5 and Dreamweaver CS4 to test my osCommerce store (I like to see what's happening visually, even if I just change a small variable in the code). Although I have imported the store database from my remote server, and the connection tests in the DW Database window to the store, mysql, and information schema databases in Dreamweaver are successful, I still get "Unable to connect to the database server!" when I try to preview a .php page with Live View or with a browser. I'm using the correct ports in my site definition (8888 and 8889). MAMP shows Apache and MySQL running, of course. Have tried logging in as root and as my ususal username witht the correct passwords. Everything seems to be right...but it's still wrong.
Do I also need to import the mysql and information schema databases from my remote server to replace the ones that came with MAMP? If so, where do I put the information schema db? Although it shows as a database in PhpMyAdmin, I don't see a folder or doc by that name anywhere in MAMP - it must be buried pretty deep! (I did find a file called information_schema_relations.lib.php in MAMP/bin/phpMyAdmin/libraries. Is that it?)
Or is it something else entirely?
Note that though I'm a fairly savvy user, I am not a developer or coder. Strictly a GUI/static design guy with a liberal arts education. Keep the answers simple and in plain English, thanks.
Have also posted this on the MAMP forum.Hi Kanstantin,
Ieve tested the database connectivity through sqlplus using SYSTEM. But when I try to connect (Mount the repositiry server from MDM console, I facing the problem mentioned.
Please let me know if I need to do anything else.
For your info:
The following are the tnsnames entries
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MD7 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mysapplm)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MD7)
(INSTANCE_NAME = MD7)
(GLOBAL_NAME = MD7)
(HS = OK)
The following are the entries in listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = I:\oracle\MD7\102)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = mysapplm)(PORT = 1521))
Regrads,
Varadhu
Edited by: Varadhu on Aug 6, 2009 10:49 AM
Maybe you are looking for
-
Sending Strings Over GKSession - How to stop some craziness?
Sounds simple, right? But the tricky part is I am trying to retain the header structure from GKTank... I am quite desperate for help at this point as I've been flailing around on this all day and all night.... All my other events use this structure a
-
Calling functions from SOAP webservice. Can't access webservice functions.
Hi flex gurus, I am quite new to flex. I am working on an flex application where I am trying to remotely invoke a SOAP webservice which is a wsdl file from Adobe flex 4.6. I have authenticated the webservice(Basic Authentication Done) and got access
-
Not able to import in iPhoto 09 from Nikon D90
After upgrading to iPhoto 09 I cannot anymore import pictures from my Nikon D90. After having performed the import in my library I can only see the thumbnails, but if I try to view the full image for editing or just for viewing full screen I just see
-
I already own Student Edition CS6 Photoshop Extended and Want to Buy the Design Standard Student
I already own the Student/Teacher Edition CS6 Photoshop Extended and want to buy the Design Standard Student/Teacher edition in order to add In-Design and Illustrator to my Mac. My concern is that, since Photoshop is included in the Design Standard c
-
I need to backup emails so I can uninstall and reinstall TB how?
TB will not let me send emails. I can receive, but not send. I have double checked the settings and even conferred with my ISP who also can't figure it out. I have resigned myself to having to export or save my emails (I have several email addresses)