Lost connection when attempting to setup asdm

Hi everyone,
I was vpn in and log onto my local desktop. I putty into my ASA and was in the process of configuring my ASA for asdm.
I had just input...
nameif inside <enter>
ip add <default gateway 255.255.255.0> <enter>
and I sudden lost connection to the desktop and now can't remote or ping my desktop and other servers on the network (use to able to).
I can still vpn in though..so not sure what the heck is going on. Did i set up "ip add..." wrong? Big Help please.

We do not have enough information to be sure about what the heck is going on but it sure does sound like you changed the IP address on the inside interface and that now devices on the inside (including your desktop) are attempting to communicate with the ASA using an address that is no longer the address of the ASA.
One thing about this situation that puzzles me is that if you were configuring the ASA for ASDM how does that lead you to configure an IP address on the inside interface? To enable ASDM you need to be sure that the correct version of ASDM code is loaded in flash, you need the configuration to point to that ASDM file, and you need to specify what source addresses can use ASDM.
HTH
Rick

Similar Messages

Apple Wireless Keyboard lost connection when "command+space" is pressed

Hi, my apple wireless keyboard lost connection when command and space key was pressed. it does not lost connection when other keys combination was pressed. Are there any people has the same problem with me?
I am using Emacs all the time, the command and space key is the default short cut for Mark in Emacs. It is constantly used in my daily work. The wireless keyboard does not lost connection always, but it does lost connection sometimes. I have observed every time it lost connection, the command + space was pressed. Really strange. Any advice?
I am using Macbook Pro 13inch Late 2012, OSX 10.9.1, and Apple Wireless Keyboard

Got the keyboard working again, here how incase it can help anyone else:
I borrowed a USB keyboard to allow me to get past the pasword login.
First I rang disk utitlity to repair any permissions. I opended up the app 'Bluetooth Setup Assistant' selected 'Keyboard' then I turned the keyboard 'on' so the green light is flashing' and then hit continue. At this point the keyboard appears in the listing of found items, hitting continue I am then given a unique pairing code. Enter this on the keyboard and hit 'Return' after a few seconds, the pairing is complete and by wireless keyboard is back and working again!

Repeated lost connections when using WRT54g

Hello everyone.
I have a Lynksys WRT54g v5 and a cable modem, my ISP is Virgin Mobile. Every half an hour or so my internet connection is lost and can only be regained by reseting my modem by turning it on and off. The lost connections appear to occur more frequently when the traffic is heavier. The interuptions occur even when I only have one wired PC connection.
If I connect the PC directly to the modem the connection works fine.
I have already installed the latest firmware, reset to factory settings, tried a MAC address clone as suggested in another thread but nothing has helped.
Is there anything I can try or should I just bin the router?
Thanks for your help!

Version 5 and 6 of this router are of a terrible design. No amount of tweaking, reconfiguration or firmware upgrades will likely help with the disconnect problem. Earlier versions are of a much better design. I had disconnect problems with my version 6 router for over two month which could not be resolved by many attempts through Linksys tech-support. Even replacing it with 2 more version 6 routers did not resolve the disconnect problems which occured 3 or more times a day.
After I changed to a version 3 of the WRT54G the disconnect problem was instantly cured. Version 4 and below or WRT54GL ( which is really a resurrected version4)should work fine.

RDP 8.02438 for Mac lost connection when scroll on touchpad or mouse

Hello
when I scrolled pages in win apps by using touchpad or apple mouse rdp lost connection and error message appears: "connection reset by peer"
It appear not always but if I switch from one apps to anther in launchpad and tries to scroll at once in active window(not always but often). But if after switching to that app I press somewhere inside active window by mouse I can scroll (in that case scroll
always works correctly)
It seems that in RDP after switching to new app window it gets focus only after clicking inside active window.
It's difficult to me describe it exactly in english

[2014-Feb-18 17:18:42] RDP (0): Server hides cursor
[2014-Feb-18 17:18:42] RDP (0): Server hides cursor
[2014-Feb-18 17:18:42] RDP (0): Server hides cursor
[2014-Feb-18 17:18:42] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Feb-18 17:18:42] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Feb-18 17:18:42] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Feb-19 10:44:12] RDP (0): Final rdp configuration used: screen mode id:i:2
use multimon:i:1
session bpp:i:24
full address:s:*****
audiomode:i:0
username:s:******
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:0
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com:1
bookmarktype:i:3
use redirection server name:i:0
[2014-Feb-19 10:44:12] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Feb-19 10:44:12] RDP (0): lo0 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Feb-19 10:44:12] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Feb-19 10:44:12] RDP (0): lo0 af=30 (AF_INET6) addr=*** netmask=ffff:ffff:ffff:ffff::
[2014-Feb-19 10:44:12] RDP (0): gif0 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): stf0 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): en0 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): en0 af=30 (AF_INET6) addr=***** netmask=ffff:ffff:ffff:ffff::
[2014-Feb-19 10:44:12] RDP (0): en0 af=2 (AF_INET) addr=1***** netmask=255.255.255.0
[2014-Feb-19 10:44:12] RDP (0): en1 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): en2 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): bridge0 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): p2p0 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): vnic0 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): vnic0 af=2 (AF_INET) addr=***** netmask=255.255.255.0
[2014-Feb-19 10:44:12] RDP (0): vnic1 af=18 addr= netmask=
[2014-Feb-19 10:44:12] RDP (0): vnic1 af=2 (AF_INET) addr=****** netmask=255.255.255.0
[2014-Feb-19 10:44:12] RDP (0): --- END INTERFACE LIST ---
[2014-Feb-19 10:44:12] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Feb-19 10:44:12] RDP (0): client version: 8.0.24308
[2014-Feb-19 10:44:12] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Feb-19 10:44:12] RDP (0): Resolved '****' to '****' using NameResolveMethod_DNS(1)
[2014-Feb-19 10:44:12] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Feb-19 10:44:12] RDP (0): Exception caught: Exception in file '../../librdp/itotlayer.cpp' at line 847
User Message : Security negotiation Error: NotAllowed(2)
[2014-Feb-19 10:44:12] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Feb-19 10:44:12] RDP (0): Resolved '****' to '****' using NameResolveMethod_DNS(1)
[2014-Feb-19 10:44:12] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Feb-19 10:44:12] RDP (0): **** User ACCEPTED connection to basic security host
[2014-Feb-19 10:44:12] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Feb-19 10:44:12] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Feb-19 10:44:12] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Feb-19 10:44:28] RDP (0): Server hides cursor
[2014-Feb-19 10:44:30] RDP (0): Server shows cursor
[2014-Feb-19 10:44:38] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Feb-19 10:44:38] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Feb-19 10:56:55] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Feb-19 10:56:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Feb-19 10:56:56] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Feb-19 10:57:55] RDP (0): *** Application terminated ***
[2014-Feb-19 11:49:35] RDP (0): *** Application terminated ***

Lost connection when using telephone

i lose my internet connection when i make or receive a phone call...the comcast guy told me to try and change the channel my airport runs on...how do i do this if it makes any sense to anyone else
thanks eric

Duane,
thank you i am no longer having problems after about a year everything is working properly.....the channel was set to automatic and i put it on 11
thanks again,
eric

"Create" button dim when attempting to setup mirrored RAID in Disk Utility.

I'm trying to setup a mirrored RAID in Disk Utility (v10.5.6) in MacOS 10.4.11 on a PowerMac G5. I've got the System and all of my files on a 500 GB Seagate internal drive and I've added a blank 500 GB Western Digital internal drive to be the mirror. When I boot from the Seagate drive and run Disk Utility, I can follow all of the instructions for setting up a mirrored RAID (except the last instruction):
1) Launch disk utility.
2) Select my boot drive.
3) Click on the RAID tab.
4) Enter a RAID Set Name and select a Volume Format (Mac OS Extended Journaled).
5) Drag a drive or volume to the set. Okay, I actually have a problem here, because if I drag the boot volume or drive to the set, nothing happens (it doesn't appear in the selection box). So I drag the blank volume to the set and it shows up in the selection box.
6) Select RAID type (RAID Slice).
7) Click the "Create" button.
That's the step that I can't complete; the "Create" button is dimmed (grayed out, disabled). My boot drive isn't partitioned (it has just one volume), I've run Disk Utility to repair Disk Permissions before I attempted to set up the RAID, and both drives are formatted as "Mac OS Extended Journaled." The only potential cause I can think of is that the two drives I'm using, though they're both 500 GB drives, are from different manufacturers. I can't imagine that would make a difference though.
Why is the "Create" button dimmed?
Any help would be GREATLY appreciated!
Thanks,
Scott

Hi there,
Thanks for your help!
Your explanation makes sense. I've just recovered from a hard drive failure and although I'd backed up most of the files the night before, I still lost a day's worth of email and several days worth of other files. Mirroring appealed to me because then I'd always have a completely up-to-date copy of everything, but your bad experiences with it give me pause.
Is there another backup strategy you can recommend that would give me really up-to-date backups of my entire boot volume?
Thanks again!
Scott

Lost connection when neighbors start WiFi router

Am going crazy with this:
I am in the suburbs and was the only person with WiFi nearby. Recently 2 other people got WiFi as well, and it seems that when they start their WiFi routers, I lose my connection.
My setup: 10.4.7/PowerBook 17"/Airport Express.
I can be working, and then suddenly lose connection. I go to the AirPort menu, and suddenly see one or 2 other networks, but mine is gone. The attempts then can take up to 30 minutes to resolve (apparently thru voodoo) but my feeling is that when they go offline and switch off, I can get back online!
Not good! I have Interference Robustness selected, but am at a loss what to do...
Anyone with any ideas?
Thanks
Peter

Hi,
Try to change the channel of your wireless router. If you have the option with your router; preferably set the channel to "automatic".
If you are in the case that you can no longer connect to your router wirelessly, use an ethernet cable to be able to access to router and change the channel.
hope this help,

Lost connection when buying songs

I purchased an album from iTunes but as it was downloading I lost my connection.
When I restarted iTunes there was no record of the downloads but the money has come out of my account.
Is there anyway to get the album back without having to pay for it again?
Any help would be very helpful.
Thanks

In the Advanced menu, try the Check for Purchases option to see if that works. Failing that, contact the iTunes Support for Download purchases here:
http://www.apple.com/uk/support/itunes/musicstore/download/
You'll get your songs one way or another without having to pay again, don't worry.

Failed connection when attempting to connect to Windows Vista PC from OS X Mavericks

I've recently carried out a system recovery of my Windows Vista notebook and now I can no longer connect to it from my iMac. I had no problems connecting before and I've checked all the relevant settings on the Vista PC under the network section, ie. network discovery is on, file sharing is on etc. I can access the iMac from the PC with no trouble and the notebook is showing up in Finder on the Mac - but when I try to connect, I get an error message as shown below.
Would really appreciate it if someone could throw some light on this issue for me. I have tried disabling the Windows Firewall and also creating other user accounts on the notebook, but none of these things make any difference. I have also tried connecting using the 'Finder' 'Go' 'Connect to Server...' option but this also doesn't work. I'm running Mavericks on the iMac.
Many thanks
Donna

Ok, that all looks fine and I presume there's no problem with internet access and yes, 254 in your case would be the router. DNS server should also be set at 192.168.1.254, but that's not going to affect our current issue.
(For future reference, DNS setting can be seen this way (amongst others):
Mac: System Preferences > Network
and Win Vista: Network & Sharing Center > View status > Details
But back to our problem... could you please verify a few things:
1. The setup of public folder sharing (Network & Sharing Center): set the middle option:
and password protected sharing off:
2. Please also turn off firewalls on both the Win and Mac machines
3. On the Mac, open Terminal (Applications > Utilities) and type ping -c 4 192.168.1.71
4. If that works, type ping -c 4 jdnotebook.local
5. If that works, use Finder to connect to server but this time use smb://jdnotebook.local (even though password protected sharing is off, you still might need to supply your registered user name and password (do verify those on your Win machine, and preferably supply an admin user account from the Win machine in the Finder "Connect As" box)
Correction to point 5: I still hadn't turned off password protected sharing on my vista machine so you should be fine in Finder to "Connect As" Guest
reply with results please
Message was edited by: SilverSkyRat: Correction

IPhoto 08 with Mac OSX 10.5.8 will not connect when attempting to "buy" a book.

The title pretty much explains my problem. I've created and purchased books from my iPhoto in the past with no problems but it's been a year or more since the last one. I created a book, did all the layout etc. and when I click "buy book" it has a pop-up that says "connecting" but then nothing happens. It just continues to have the "connecting" popup with blue bars moving as if it's working. I've left it "connecting" for a good 10-15 min with no change. All my software is updated.
Please show me the light.

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

Airport Express disconnects wired internet connection when attempting to extend Airport Extreme WiFi network

I just purchased and airport express to extend my wifi network. My base station is an airport extreme, I have one wired connection and a wifi network. When I go through the recommended steps to set up the express and "extend the network", the airport extreme will no longer connect to the internet via ethernet. I have tried various settings and can't seem to resolve the problem. Any assistance would be much appreciated.

Ok so we now have a solution to the problem. A friend of mine came round to work this out with me last night and we were able to get it working, but it is not as easy as I had hoped. Fisrtly we plugged the airport express into my router using the ethernet cable (for this I am using an Airport Express Base Station") and in airport utilities selected the airport express. In edit, we then gave the airport express a new range of IP address which did not conflict with any of the other applications that I have already assigned. We also named the Airport Express with a distinguishable name. We then waited for the changes to be registered then unplugged the Airport Express from the router. I then plugged my AppleTV via HDMI into a tv to test it and selected the new wifi network with the new Airport Express distinguishable name. I was able to watch a video that I have on my ipad directly on my tv without being connected to the internet, and was able to play Airplay presentations.
No the easiest solution, and certainly not something that anyone at Apple has talked me through in my lengthy conversations with them at Applecare.
Hope this helps.

My IPod Clasic will sometimes display the error "lost connection" when it's being used, but not when connected to my computer. Any ideas?

This does not happen when connected to a docking device or computer, only when it is being used with headphones. If I reboot, it's fine, but it does happen again.

Have discovered that I had not in fact updated the ios!!
Went through the process last night and my ipod now works fine on my docking station.
Thank you very much for your advice.

Getting 'Unable to verify account information' when attempting to setup Hotmail account

I enabled two-step verification today on my Hotmail email account.   This is my one and only Outlook account and is my 'primary alias' which is correct.   I am able to retrieve email on my iPhone and Windows PC just fine - have logged in and out several times today on the PC with no problem.   However I now cannot get this account setup properly on my iPad, though it worked before today.   I get the 'Unable to verify account information' message when I try to set up the account new again on iPad.   (I was forced to try and delete and reset it up.)
Is this somehow related to the two-step verification?   If so I will remove it and go back to single sign in.   What do you advise for email on the iPad in this case?
Thanks
Michelle

kmgilliam wrote:
Is this somehow related to the two-step verification?
Yes.
If so I will remove it and go back to single sign in.   What do you advise for email on the iPad in this case?
That's a question for Microsoft.

Outlook lost connection when load balanced CAS array name was moved to different AD site and data centre

At the weekend our F5 load balanced CAS array name was moved to our 3rd datacentre and all users lost access to Outlook. The databases were running on DAG2 listed below at the time.
We have 3 DAG servers configured as the following:
DAG SERVER ONE (DAG1) | Datacentre 1 | Primary AD Site | Multi role server MBX, CAS, HT
DAG SERVER TWO (DAG2) | Datacentre 2 | Primary AD Site | Multi role server MBX, CAS, HT
DAG SERVER THREE (DAG3) | Datacentre 3 | Secondary AD Site | Multi role server MBX, CAS, HT
We primarlily run from DAG1 or DAG2 - DAG3 is for real DR and loss of Datacentre 1 and 2. The CAS array "Outlook" is configured for the primary AD site load balanced across DAG1 and DAG2.
We use an F5 load balancer that balances the connections across DAG1 and DAG2, if both fail then DAG3 is used automatically. We have tested and it works fine simulating loosing DAG1 and DAG2 and bringing up as a 1 node cluster on DAG3 with a
FSW and the load balancer pointing at DAG3 for Outlook connections.
For some reason this stopped Outlook users connecting - can anyone advise me why as I have been asked to test this again and I was expecting it to work?

Hi,
As far as I know, For Exchange 2010 before SP2 RU3,the Outlook clients with an existing Outlook profile would continue to use the old RPC endpoint rather than the new RPC endpoint (even though Autodiscover detected the change). Thus, except with Andy's suggestion,
I recommend you can also repair or recreate the Outlook profile to have a test.
For more information, you can refer to the following article:
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
Thanks,
Angela Shi
TechNet Community Support

Lost connection when I upload songs from a CD

Whenever I upload songs from a CD onto my itunes music library I lose my internet connection. Also, the CD plays slow when it's uploading the songs. I use dial-up, by the way.

Even if I don't play the CD I lose my internet connection.

Lost connection when attempting to setup asdm

Similar Messages

Maybe you are looking for