Lost contact with remote speakers after installing iTunes 10.6

I upgraded to iTunes 10.6, then noticed I now cannot access remote speakers connected to AirPort Express... directly from iTunes, from my iPhone, nor from my iPad.  Please Help.

Hi Larry,
I had the same problem with iTune 10.6.5, and one cannot uninstall it. I was on the phone with Apple wireless support. The solution is to upgrae firmware on the Express, whihc cannot be doen with the latest airport utilities. HOwever, Apple re-posted Airport utility 5.6 for lion, which will then allow you to upgrade the firmware on older Aplle Express Units. This in turn will allow iTune 10.6 to communicate properly wit the Express. Doing so  restored my connection to the speakesr without any further issues.
Give it a try...
the utility i sloctaed at:
http://support.apple.com/kb/DL1482?viewlocale=en_US&locale=en_US
Best,
rk007

Similar Messages

  • Not able to connect with remote speakers after successfully set up

    I just finished setting up successfully (joining existing wireless network) but when I go to Itunes and select my remote speakers it just goes connecting to airport and then stops. Any ideas why?

    You might want to try upgrading to the latest version of JavaMail (1.4.3), which makes use
    of SSL somewhat simpler. Also, the file SSLNOTES.txt included with JavaMail has some
    tips for debugging problems such as this, as does the JavaMail FAQ.
    Most often this error is caused by not having the appropriate certificates in your local trust
    store. The JDK normally comes with the required root certificates, but if you're running in
    an application server environment you might be using a different trust store.

  • How i can stop sharing my contacts with other iphone after installing find my iphone?

    After installing find my iphone in other devices my contacts starting sharing with that device. How i can stop that?

    The two devices are using the same iCloud ID, hence they are syncing the contacts, as the system is designed to do.
    BTY, I'm not sure what your intention was to install the Find My iPhone app, but if you are trying to start that service, the app won't help. It is intended to locate OTHER devices.  To start the Find My iPhone service, you do it via the settings.

  • Problems with my library after installing itunes 7

    I have just installed itunes 7 and when i set it up i have obviously clicked on something wrong as it has rearranged my entire collection and renamed everything, it has put every file from my computer in my library. Is there any way of taking it back?

    Try using the restore function on windows xp if you have it turned on that is. Click start then go to all programs then accessories then select system tools then select system restore. If you didn't turn this function off you will be able to go back to a time before your upgrade to itunes 7 and all your music will be back the way it was before the upgrade.
    Hope that helps you...
    Cheers sugaris...
      Windows XP Pro  
      Windows XP Pro  

  • I am having issues with home sharing after installing iTunes 11.

    I am using window vista ultimate 64.  I've done everything I could think of including uninstalling all apple software and everything apple related. Installed iTunes 10 and it still will not work. I've checked firewall settings. Rebooted everything.  I'm at odds. What next.
    Before the install. All my apple products would connect without any issues.
    Anyone have any ideas.

    Home sharing icon no longer shows up in iTunes. You can check my solution here

  • Lost contact and calendar info after installing 2.0

    I installed the 2.0 update, and I lost all of my contact info and my calendar info. Since I primarily use the iPhone, it was not synced to my Powerbook.
    Is there any way to restore this info (something I may have missed when entering it all manually), and how do I prevent this from happening again (outside of never installing an update)
    Thanks for your help,
    Ruth

    In 1.4.1 :) check the Preferences | Import and uncheck the check box "Show import dialog when a memory card is detected"
    Check the same box in 2.0, if that is what you want to do.

  • Server 4: Cannot connect to remote server: "lost contact with the AuthService"

    Attempting to upgrade to Server 4; have Server 4 app on my local Mac to administer a remote Mac mini running Server 4. Server app 4 on the mini connects to itself; however, I cannot user Server app 4 on my local Mac to connect remotely to the mini. Have verified the machine name, user, and password are all correct (they haven't changed and worked fine under Server 3.2.2). Console on the local machine shows the following error:
    12/27/14 5:56:27.303 PM Server[4193]: Connected to the Auth Service
    12/27/14 5:56:27.303 PM Server[4193]: authenticateToServermgrdAs: connection returned an error Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.servermgrd.auth was invalidated.) UserInfo=0x60800047f780 {NSDebugDescription=The connection to service named com.apple.servermgrd.auth was invalidated.}
    12/27/14 5:56:27.304 PM Server[4193]: We have lost contact with the AuthService we will need to reauth
    Any ideas on how to troubleshoot? Thanks --

    Export the com.apple.servermgrd certificate from your server. Import it on your local computer and ensure that it is set to Always Trust. Ensure that you also follow the directions from the article linked below.
    How to administer OS X Server remotely using Server App - Apple Support

  • Macbook with osx 10.6.8 crashes after installing itunes 10.6 when viewing in the album mode(middle one)?

    Macbook with osx 10.6.8 crashes in the album mode(middle one) after installing itunes 10.6? It still crashes if I open itunes in the sfe mode.

    iTUNES 10.6.1.7
    How do I restore the original iTUNES that recognizes our music libraries and our iPODS?
    Thanks for your consideration.
    Message was edited by: mrtruffles

  • HT6001 After installing iTunes 11.1.4 I cannot sync wirelessly with my iPad Air.

    After installing iTunes update 11.1.4, I find I cannot sync wirelessly with my iPad Air. I connected OK with a USB cable and checked that I had wireless syncing switched on my iMac which is running OS X 10.9.1. Anyone else haviing similar issues?

    Same here...very annoying. I reinstalled mavericks, but no result

  • Problems to sync my computer calendar with my Iphone after installing latest Itunes download

    problems to sync my computer calendar with my Iphone after installing latest Itunes download

    When I connect my Iphone to the computer Ai have to sync automatically my outlook calendar. Never had any issues except with the latest download that tell is doing some sync over the air with ICloud and that I can go to my Iphone and change that. So far I have not been able to sync my Iphone calendar with my outlook calendar for tge whole week

  • Lost music file association in win 7 after installing iTunes.

    After installing iTunes on my win7 PC my music did not show up in iTunes and now when I go to the music files in windows it shows all the folders empty. I performed windows search on my drive and with some effort can find the music. Please note these files are not in the my music folder, they are in a file in my documents. ( I have a reason for that ).

    Ps the above question is how to I put it all back?

  • I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

    I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

    Hi jandroantonio,
    Welcome to Apple Support Communities.
    It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Best,
    Jeremy

  • Windows 7 BSOD randomly occuring after installing iTunes 10.6 with iPhone 4 in dock

    After installing iTunes 10.6 and IOS 5.1 on my iPhone 4, Windows 7 computer was randomly blue screening with the iPhone 4 in the attached dock. After removing the phone from the dock, system works fine.

    Re-installed iTunes as you suggested and it worked.  However, started experiencing random BSOD's.  Disk check found a number of file errors on the boot drive - which it fixed.  It then took a number of re-boots before computer became stable. 
    Then, upgraded iTunes on a HP workstation (no iPhone attached).  On reboot windows had to attempt a boot repair 3 times before it would reboot.  Couldn't even do a disk check without first reverting to the last restore point.  It also corrupted Norton.  The end result was 2.5 hours of wasted time.
    Being an expert pc user, I can safely say that I believe Apple has some serious issues with 10.6.

  • After installing iTunes 8.1 on a PC with Vista,,,, will not boot

    After installing iTunes 8.1 on a PC with Vista. The computer will not boot up. It Start to boot up and hang up and never completely boots up.

    I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
    You asked what I meant about saving the installer on your PC.
    When you go to the iTunes download page:
    http://www.apple.com/itunes/download/
    And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
    After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
    It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
    I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
    The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
    The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

  • Upgrade to iTunes 7.2 broke connection with remote speakers

    There have been a few discussions about the inability of iTunes to connect to remote speakers in the past, and I found one that was answered regarding an upgrade to 7.0 back in September 2006 - b noir recommended the help article posted on his page: http://docs.info.apple.com/article.html?artnum=304371
    My issue is the same as the one posted in Sept. 2006, but it only started when I downloaded the upgrade to iTunes 7.2. I see the remote speakers greyed out in my iTunes speaker list but can't select them. The fix in the help article above of configuring IPv6 doesn't help. Has anyone else run into this/have any suggestions for me? My wireless network consists of 2 Airport Expresses; the extension is the one hooked up to my speakers.
    Many, many thanks!

    I'm experiencing something similar where my remote speakers are working well from my Macs (wired) and Windows Vista laptop (wireless) but do not show up at all from my Windows XP desktop (wired).
    I do have Symantec Personal Firewall running, but I have (1) trusted my local internal network, (2) explicitly opened ports 3689 and 5353 and (3) tried it with the firewall disabled with no luck. I do not have Windows Firewall running, and I don't believe I have anything else that would be limiting network traffic. I do not have Bonjour or Rendevous services running. I can ping the AEs just fine (I have 3 AEs), and I am on the same subnet. I have selected LOOK FOR REMOTE SPEAKERS in the iTunes settings, and I am running the latest version of iTunes (7.2). I have also not tried downgraded to an earlier version of iTunes, but for now I'd rather get this fixed in another fashion as 7.2 works well from my other machines.
    I hope the above description (with fixes recommended by other users in other threads) is helpful. I appreciate any input or feedback people may have.

Maybe you are looking for

  • Literally the worst customer support experience I've ever had to deal with -- Why don't they let their customers speak to supervisors on demand?

    Call 1: I spoke to them to see if I was eligible for an upgrade. It turned out they had accidentally counted a temporary phone switch to an old device as an upgrade. The representative was extremely slow minded and took over an hour to read through m

  • Why does Firefox keep redirecting me?

    I have a MacBook Pro. OS X 10.8.4 After I open Firefox and type a website to navigate to, it initially opens the page but then immediately redirects to another page. Sometimes it redirects to Lycos.com, or another random advertisement page. Other tim

  • Interchange CS3 documents won't open in CS (3.0.1)

    I have InDesign CS (PC platform) upgraded to 3.0.1, so it's supposed to be capable of reading Interchange documents. My associate has CS3 (MAC platform). He obtained a plugin to make Interchange files backwards compatible. He created several document

  • Scaling of text outlines in svg format

    I'm in need of a solution for scaling text outlines in an svg format. I'm working on developing a Flash app that allows users to type in Flash text with an outline that is then exported out in an svg format. When user then scales the resulting svg fo

  • Moving service providers

    I am moving from on BES provider to another.  I understand that I have to Backup my device, wipe my handheld, change my DNS to reflect the new server, and then restore the device.  What I am wondering is if there is a turnaround time to wait for RIM