Lost contacts info after soft reset

Not a webOS question...
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

@md14
Think that you will find Need for Speed, Galaxy on Fire and Real Golf 2011 in circulation.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Removing voicemail contact info after hard reset

I've just done a hard reset on my Centro in anticipation of selling it as I've upgraded & changed sedrvice providers. I did a successful hard reset which removed all my contact & calendar info, but when I hit voicemail it tries to contact using my phone number. I know it won't connect, but I'd rather my number not show up. Any suggestions?
Post relates to: Centro (Sprint)

Where are you seeing the voicemail? If it is on the favorites pages where you can assign a quick dial number to it highlight that page and then tap on the carrier in the top left and select edit button. Then remove voicemail or change it to a different number.

HT1369 how to retreive lost iphone info after sync

anyway to get back lost iphone info after sync? ie contacts, pics etc.

All of this should be on your computer. Just sync it back.

I cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud

i cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud, i'm using PC

Please try clearing cache and cookies. If that doesn't help you can try disabli9ng add-ons and see if it help. [[Safe Mode]] is to disabled add-ons.

HT3728 after soft resetting how to set a new password to my airport express

after soft resetting the airport exppress how to set a new password to my airport express

Hello, MevanK.
Thank you for the question. You may find this article helpful in changing or creating a password for your AirPort Express.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
Jason H.

Palm TX: Bluetooth settings lost after soft reset

Hi all,
all my bluetooth settings get lost, when I perform a soft reset. Does anyone have a hint which files are getting deleted or "updated" from the ROM so I can restore them from a backup? Or do you perhaps have a solution so that the settings won't get deleted?
Thank you very much in advance!
Cheers!

I too have a problem with resets while using the Palm Bluetooth Keyboard 3245WW but i think my resets are only limited within Wordsmith when pressing the Delete/Del key. Try seeing if your problem is related to one particular key... though admitedly i use a T3 not a TX and i have read about others on the TX experiencing random resets. I am just wondering if it is tied to the Delete key like my problem.
My fix for my problem was to stuff some paper under the Delete key so i wont accedentally press it while typing.

Repeated 'ORA-12547: TNS: lost contact' messages after installing Oracle 10

Hi,
I installed Oracle 10g on Redhat ES 3, and the install went well, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it.
I have been told that my previous partial installation of Oracle 8 may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Are there any configuration changes I can make to resolve it?
My problem sounds like it may be similar problem to a recent posting by Hugo Ferrer - but my Spanish isn't good enough to fully understand Hugo's problem. Anyways, I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

Restore after soft reset not working

I'm hating my 5800 more and more by the day.
I just did a soft reset in order to overcome the 'voice system error'.
Then I did a restore of all the contacts, calender etc.
What did it restore?
NOTHING!
Now what am I supposed to do?! Thanks again nokia......
Nokia might know what they're doing with traditional 'mobile phones' but when it comes to smartphones they are clueless.

I went into 'applications' on the phone and did an update (of about 7 things)
I then reapplied the restore and it's "working" now i.e. the contacts are back in place but it still gets the 'voice system error'
however the stupid POS thing has seemingly lost all of the applications I installed
again,
THANKS NOKIA!

Lost CONTACT list after SIM card change requested by operator

Dear All, this is my first post, so please bear with me. I am recurring to this forum to ask for HELP on an issue that is really annoying, specially after spending over an hour with a BlackBerry Support Person who tried many steps to solve the issue without any luck [it was obvious this person did not have the technical expertise to handle the problem at hand]. Here's the story: Last week I received on the mail a new SIM card with a letter indicating I had to replace my "old" SIM card with this new one, after receiving a text message from the operator. On Friday I received the SMS and proceeded with the change. Prior to exchanging SIM Cards, I asked the Call Center Agent if this would cause any problems with my 8520 BB. The answer was NO, all the configuration info remains on the device, and not on the SIM card. Well, this was not the case and some applications lost their configuration: email and contacts. Curiously, the BBM service was unaltered. So I would like to know how can I get back my Contact List? (the email service was quickly and easily reconfigured). Apparently my old Contact list is somewhere in the Device's memory... but a New Contact List has been created after the SIM Card change. I know this because when I press the Call History, all the contacts' info is available ... but when pressing the Contacts Address I can only see 1 contact. Any ideas???? Thank You All.

This is a fun little (and I mean little) problem. Let's walk through it here.
1) Some applications lost email and contact configurations.
A) I'm not entirely sure what you mean in particular as far as the email problem goes. Were the e-mails still set up, but you weren't receiving them? Most likely because the new SIM card contained a new ID number. If you were to go to Options > Advanced Options > Host Routing Tables, press the menu button, and hit Register...that should fix your problem there.
2) BBM Service was unaltered.
A) This is because the BBM service is reliant on the PIN number unique to your device (not your SIM card).
3) Lost contact list, but still showing in the call history.
A) Your call history is just data stored on the device, the only time your contact history is access when sending and making a call is just a simple check to see if you have the information stored already to match a name to it. The data stored in history is it's own entity. I explained this in a slightly confusing manner, but it's slightly irrelevant.
It's entirely possible that your contact list was stored on your SIM card and not to your device. Try this out:
-Insert your old SIM card into your phone
-Open up your contacts and hit the menu button
-Scroll down and select "SIM Phone Book"
-Here you should see the list of contacts if they were truly stored on your SIM and not your phone.
-Hit the menu button again, and choose "Copy all to Contacts"
Once the process is complete, you may reinsert the new SIM card and continue on using the phone as normal.
Hope this helps!
Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

Airport Extreme Freezes After Soft Reset

Hi Everyone,
I'm having an issue with the 7.5.2 firmware update for my Airport Extreme. We have several devices which use DHCP reservations and after updating to 7.5.2 I went in to change some of the IPs and other settings (using AirPort Utility). After making the changes I pressed update and the Airport started the reset, but the light just stays amber and I have no connectivity. I end up having to pull the plug and do a hard reset. After a hard reset, when I check the Airport, none of my changes went into effect.
I have tried many times with different settings and it always does the same thing whenever I try to update the changes; it hangs during the soft reset without saving any changes. When I downgrade the firmware to 7.4.2, however, everything works perfectly.
Any help would be appreciated. Thanks!

I too have run into the same problem as ‘controls.freq’ although sometimes the light just stays amber (like controls.freq’s documented post) and other times it stays solid green after clicking "Update." No matter, the result is the same -- I have to perform a hard reset (pull the plug) of the Airport Extreme and none of my changes have been made. I not only run into this when trying to add static DHCP addresses (like controls.freq), but also when trying to add MAC addresses to timed access control lists, or (when playing around) trying to change my wireless network name .... honestly, it probably fails for many other changes too.
So I tried what Bob suggested -- but no luck. A lot of effort but no reward. I tried loading 7.4 firmware (tried both 7.4.2 and 7.4.1 which ran more reliably in my environment) and then doing the factory reset, then upgrading to 7.5.2 and setting everything up. But after maybe one successful save of settings, all subsequent saves failed as described earlier. Then I tried a factory reset while running 7.5.2 and ran into the same problem after maybe the first successful save.
The only reliable workaround is to DOWNGRADE to 7.4.x, make the necessary changes, and then upgrade again to 7.5.2. I must say ... if there were some way I could get the system to stop offering new code reliably (that doesn’t even work even when I tell it I don’t want to check for updates), then I’d just stay with 7.4.1 throughout the environment with success.

HT4859 lost contact list after software update

Lost contact list on my phone after software update!

What were you syncing your contacts to? icloud/google/gmail....

Lost contacts & photos after update to 4.2.1

Did the update to my iPhone tonight. Went through the usual procedure through iTunes. Afterward I saw first that many of my photos were gone. Then saw that many of my Contacts were gone. It looks as though it lost contacts and photos that were added to the phone after May 19. Great! I went back to iTunes and did a restore to Backup but that didn't fix anything.
Thanks, Apple!
I am not pleased.

I had the same problem today. Plugged the phone into my work PC to let it charge, and let it do the update. Everything was gone..:( Read the posts, but guessed that there must be a way back..
I plugged the iphone3 in first to my PC
Go to :
C:\Documents and Settings\User Name\Application Data\Apple Computer\MobileSync\Backup
Copy the last backup to be sure, and put in someplace on your desktop.
Then go to :
C:\Documents and Settings\User Name\Application Data\Apple Computer\iTunes\Mobile Backups
Open the file called structured.
Copy all the files in this folder.
Go back to
C:\Documents and Settings\User Name\Application Data\Apple Computer\MobileSync\Backup
and paste the files in here..
It seemed like itunes kept a backup before it did the update..
I got all my contacts and messages back this way..
I lost my apps, but thats better than nothing.
Paul

Pages, Numbers and Keynote are "waiting" even after soft reset

the 3 apps first "greyed" on home screen, did the soft reset (pressed home + sleep buttons). they kept "greyed" after reset, and I can't even see them in Purchased in app store. the only way I can open them is to search for them in app store, and tap open.

Please don't type in all capital letters. It makes your post harder to read.
Have you checked the Applications folder to see if the programs are there? If they are, drag them to Launchpad.

Iphone freezed after soft reset

after a soft reset everytime i try to start iphone is freezed on apple logo. tried many times (home+sleep). nothing. any suggestion?

Plug it into a mains charger for a few hours and then try Recovery Mode... http://support.apple.com/kb/HT1808

IPod won't turn on after Soft Reset?

My 8GB iPod Touch has been lagging and glitching a lot lately. So I did a Soft Reset, and now the black screen with the little silver Apple logo is on there, and stayed there for 30 minutes. If I press any button, it'll go all white and restart the reset.
Now I've waited for about an hour, and it won't turn on. Plus it won't connect to my iTunes if I plug it into my laptop.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Lost contacts info after soft reset

Similar Messages

Maybe you are looking for