Lost contacts post "upgrade"
My husband recently upgraded my iphone with the cloud when upgrading the ipad and now my contacts are gone. My photos and notes are still there - where do I look to find my contacts and reinstall them?
Resolved
Similar Messages
-
Lost contacts when upgrading ios and merging to cloud
I recently upgraded to iOS ver 6.0 Came to a question to "merge with Cloud". I had not intentionally used iCloud before but assuming merge ment the union of what was on iCloud and what was on phone, checked yes.
All my contacts were lost! on the phone. I have gone through the advice to turn off contacts/cloud etc to no avail.
The original data is not on the icloud.com!
Is there any way to recover original contacts?
thanks!They will be in whatever program/cloud service you have been syncing.
If you have failed to sync them, then they are likely gone.
You can try restoring from backup. -
Lost Contacts after Upgrade and Mobile Me
After installing the latest iPhone software 2.2 and setting up to do mobile me I lost all of my contacts and phone numbers. Can I do a restore and get all of my contact information back? My contacts were not already on my macbook pro as it is new and I am setting it up as well. NEED HELP!
When turning on over the air syncing for contact info and calendar events with a MobileMe account on an iPhone, there is a warning message provided that indicates all contact info and calendar events on your iPhone will be erased and replaced with your MobileMe online address book and calendar.
You need to sync the Address Book and iCal on your Mac with your MobileMe online address book and calendar first.
The same applies when turning on over the air syncing for contact info and calendar events with an Exchange account.
iTunes creates and maintains a backup for your iPhone which includes contact info. The backup is updated if needed as the first step during the sync process.
Which computer were you syncing your iPhone's contact info with before turning on over the air syncing for contact info with your MM account on your iPhone?
You should be able to sync the supported address book on that computer with your MM online address book, which will be followed by transferring your MM online address book to your iPhone's address book. -
Lost contacts after upgrading to IOS 8.1.2
Just upgraded to latest IOS on my iphone 4s. To my dismay all my contacts are gone! I am desperate to get them back. My phone was backed up to the cloud, I assume they are retrievable there, however I can't get into my account as it says" your account has been disabled due to security reasons". When I ask for new password to be sent, it does not send to any emails that I currently have, I can't think of where it is going. As for security questions, that is not working either. I was on the phone with apple techs ( 3 of them) and they say they can't reset my email? I don't get it? All i need is to have my password reset...
thanksWelcome to the Apple community.
Your contacts may well return once you are able to log into your iCloud account.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset. -
How can i retrieve my lost contacts after upgrading to iOS 5.1.1
I just upgraded to to the iOS 5.1.1 and a few hours later all my contacts disappeared. I tried to restore through iTunes but that did not work. - UPDATE as I am writing this. I got through to Apple Customer Service and because I had selected the option to backup to my computer (iMac 10.5.8) it was actually saving all my contacts to my "address book" app. Since I never used that application I didn't even think to look there. I just re-synced my contacts selecting "all contacts" and I was back in business.
I'm not sure I understand what you're asking, but I'll try to answer! You can either connect to iTunes and set up and activate there, or you can also use the setup assistant to set up your iPhone. As far as carrier activation, you'll have to follow the protocol that your carrier uses. Either switch SIM card, or call the number they use to allow device activation. Is that what you were wanting to know?
-
4s contacts post-upgrade problem
So it might be my noob status as an Iphone user but I installed the update to my phone and now the contacts that were on my phone that I had synced from my Mac do not show up when they text and call. So for example all the contacts on my phone (both from mac and ones entered) show up in the address book as normal; however, when one of the ones I added from my mac calls or texts it shows up as just their number as if they are not an existing contact. I tried deleting all the contacts through sync on itunes and reloading them but that doesn't help the situation. What do I do?
I figured it out, it was my bad I had specified the path to include the apex directory which gets created when you unzip apex 3.1.
So I specified the path as apex3.1/apex/ which is APEX_HOME/apex. Instead I needed to specify only the base directory which was apex3.1
(wrong)
@apxldimg.sql /apex3.1/apex
(right)
@apxldimg.sql /apex3.1 -
Upgraded iphone4 to ios5, lost contacts, help!
Just upgraded my iPhone 4 to iOS5 and now all of my contacts on my phone are gone, not good.
"Just plug in your phone and let oTunes do the rest" they said. Can I please get my contacts back?You need to turn off synching through the iCloud and synch through iTunes to your Outlook of Address Book however this will still leave you with linked/duplicate contact cards in your phone and your favorites contacts in the phone as well as all caller id photos etc. will be linked to the old contacts. In order to get rid of those contacts what I did was added the simple change to the contacts I synched from the computer (I added an exclamation point to the notes sections). Then synch to your iPhone through iTunes not through the iCloud, then search your iPhone for the first contact name you have in your list. You will see this will bring up 2 contacts for the same person. Select either contact then hit the back button. You will then be in the contact list but you will see in this work around there will be 2 contacts listed for everyone. Select the contact card and then delete it that does not have the added change so you can tell what is new and old. This will leave you with the new contact cards and remove the corrupted/lost contacts. You will lastly need to turn on the iCloud synch and either leave or remove those changes you made (like my exclamation points) from your new contacts. This is a pain in the tail but the only way I was able to completely fix the issue.
Good luck! -
i lost all my contacts upon upgrading to ios7. Does anyone know how I can get them back. my phone was not backed up beforehand.
You can solve this problem by this method.
You may need a third party easy iPhone recovery tool to recover your contacts.
http://easy-iphone-recovery.blogspot.com/iphone-recovery-resource.html
This tool can help you to recover the lost contacts directly from your iPhone. Please have a try.
If it works, try to pay for it to get the full recovery feature. -
I lost some of my contacts after upgraded to ios6 on my iphone4, please help!
I lost some of my contacts after upgraded to ios6 on my iphone4, please help!
Backup is your best option if you have one. Reverting software will not bring the contacts back.
-
I lost my contacts after upgrading to IOS6 on iPhone 4
I lost my contacts after upgrading to IOS6 on iPhone 4
At the most inconveient time possible(vaca) after downloading ICloud, All my phone contacts disappeared :( Wishing I knew how to uninstall to the way my phone was before.I leave in 4days.
-
Server 4: Cannot connect to remote server: "lost contact with the AuthService"
Attempting to upgrade to Server 4; have Server 4 app on my local Mac to administer a remote Mac mini running Server 4. Server app 4 on the mini connects to itself; however, I cannot user Server app 4 on my local Mac to connect remotely to the mini. Have verified the machine name, user, and password are all correct (they haven't changed and worked fine under Server 3.2.2). Console on the local machine shows the following error:
12/27/14 5:56:27.303 PM Server[4193]: Connected to the Auth Service
12/27/14 5:56:27.303 PM Server[4193]: authenticateToServermgrdAs: connection returned an error Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.servermgrd.auth was invalidated.) UserInfo=0x60800047f780 {NSDebugDescription=The connection to service named com.apple.servermgrd.auth was invalidated.}
12/27/14 5:56:27.304 PM Server[4193]: We have lost contact with the AuthService we will need to reauth
Any ideas on how to troubleshoot? Thanks --Export the com.apple.servermgrd certificate from your server. Import it on your local computer and ensure that it is set to Always Trust. Ensure that you also follow the directions from the article linked below.
How to administer OS X Server remotely using Server App - Apple Support -
Hi,
I tried to install Oracle 10.2.0.1 on a RedHat 4 box. Both, Oracle and RedHat are 64 bit versions. The installation was fine but the database creation (with dbca) could not create the database because of this error: ORA-12547: TNS:lost contact
I can not find any errors in the installation log. Only this warnings in the make.log:
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/snmccolm.o' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/libnmccol.a(nmccole.o)' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/libnmcbuf.a(nmcbuft.o)' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/libnmcbuf.a(nmcbufw.o)' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/libnmcbuf.a(nmcbufu.o)' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/libnmcbuf.a(snmcbufm.o)' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/libnmcbuf.a(nmcbuff.o)' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib//libnmadbg.a(nmadbg.o)' is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib//libnmadbg.a(snmadbg.o)' is incompatible with i386:x86-64 output
mv -f /opt/oracle/oracle/product/10.2.0/db_1/bin/nmccollector /opt/oracle/oracle/product/10.2.0/db_1/bin/nmccollector0
mv /opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/nmccollector /opt/oracle/oracle/product/10.2.0/db_1/bin/
Has anyone an idea? Or a hint how to encircle the problem?
Best regards,
DirkIf you execute "uname -mpi" and output value is x86_64 then you didn't install all required packages.
/usr/bin/ld: warning: i386 architecture of input file `/opt/oracle/oracle/product/10.2.0/db_1/sysman/lib/snmccolm.o' is incompatible with i386:x86-64 outputAccording to this message you are missing some 64bit package.
To find the missing package execute following command to list installed packages and post the output:
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|egrep 'compat|glibc|gcc|libstdc'|sortMessage was edited by:
Ivan Kartik
Too late... :-( -
Repeated 'ORA-12547: TNS: lost contact' messages after installing Oracle 10
Hi,
I installed Oracle 10g on Redhat ES 3, and the install went well, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it.
I have been told that my previous partial installation of Oracle 8 may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Are there any configuration changes I can make to resolve it?
My problem sounds like it may be similar problem to a recent posting by Hugo Ferrer - but my Spanish isn't good enough to fully understand Hugo's problem. Anyways, I am new to Oracle, so thanks for any help with this problem.
Colm.My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard -
Error in Infopath document merger, post upgrading to sharepoint 2013
Hi all,
Post upgradation of sharepoint portal to 2013, infopath document merger is not working for a portal.
Assuming the error or compatibility issue with earlier infopath template 2007, created the new template; still error persists.
Attaching herewith the error for reference.
Looking for the resolution of it, in case somebody had faced this & cracked it.
regards,
SandipHi,
According to your post, my understanding is that you failed to merge documents in a SharePoint Library.
To merge forms in a SharePoint Library, we need programmatically effort. Please check whether you Create Custom Merge correctly, refer to the following reference
http://msdn.microsoft.com/en-us/library/office/ee526363(v=office.14).aspx
Regarding InfoPath product, I suggest you also open a thread at
http://www.infopathdev.com/
I believe at that forum, more people in expertise in InfoPath may help you regarding this.
Refer to Merge multiple InfoPath forms:
http://office.microsoft.com/en-in/forms-server/merge-multiple-infopath-forms-HA010211945.aspx
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support -
TNS: lost contact error consuming https web services
Hi,
I'm trying this piece of pl/sql code and I'm getting TNS: lost contact error while trying to retrieve soap response. What could be wrong? I'm using oracle 10.2.0.1.0 database. Thanks in advance.
declare
envio varchar2(32767);
peticion UTL_HTTP.req;
respuesta UTL_HTTP.resp;
cadena varchar2(32767);
begin
envio := 'xxx'; -- soap request
Utl_Http.Set_Response_Error_Check ( enable => true );
Utl_Http.Set_Detailed_Excp_Support ( enable => true );
utl_http.set_wallet('file:/oracle/wallets','xxx');
peticion := UTL_HTTP.begin_request ('https://xxx','POST','HTTP/1.1');
UTL_HTTP.set_header(peticion, 'Content-Type', 'text/xml');
UTL_HTTP.set_header(peticion, 'Content-Length', LENGTH(envio));
UTL_HTTP.set_header(peticion, 'SOAPAction','');
UTL_HTTP.write_text(peticion,envio);
respuesta := UTL_HTTP.get_response(peticion);
UTL_HTTP.read_text(respuesta, envio);
UTL_HTTP.end_response(respuesta);
dbms_output.put_line(envio);
exception
when Utl_Http.Request_Failed then
Dbms_Output.Put_Line ( 'Request_Failed: ' || Utl_Http.Get_Detailed_Sqlerrm );
when Utl_Http.Http_Server_Error then
Dbms_Output.Put_Line ( 'Http_Server_Error: ' || Utl_Http.Get_Detailed_Sqlerrm );
when Utl_Http.Http_Client_Error then
Dbms_Output.Put_Line ( 'Http_Client_Error: ' || Utl_Http.Get_Detailed_Sqlerrm );
when others then
Dbms_Output.Put_Line ('Otros: ' || SQLERRM);
end;The problem is a database bug:
Bug 5575771 UTL_HTTP cannot handle https connections without a content-length
If UTL_HTTP is used to retrieve an HTTPS response with no content-length, it
throws an ORA-12547 on the final read (if the final read is shorter than the
buffer supplied).
Workaround:
Include a Content-Length section on all responses.
(This may not be possible since some responses may not
be under your control)
Message was edited by:
[email protected]
Maybe you are looking for
-
How to submit a blob with my form...
Hi, I get a image blob from database and display it on form. However, how can I submit this form including my blob to my action page? I tried using a hidden field on my form to hold the blob like so: <cfset FaceImg = toString(toBinary(FaceImg.BLOB))>
-
Using ActionScript to specify settings in the Hue/Saturation Effect
Hi there, I have been trying to write a little action script that sets up a bunch of defaults in the Hue Saturation plug-in but can only get so far. The syntax either falls over or I am missing something here because the same code will work when in A
-
Macbook Air with OS X 10.8.2 not automatically connecting to known wifi network after sleep
-
How can I get software to operate a Kensington Expert Mouse K64325
I recently bought the trackball from Amazon , and it was delivered without the software . Attempts to find a download from Kensington are unsuccessful and a link provided by Kensington customer service is at accoblobstorageus which Safari cannot acce
-
How do i switch desktops and leave the pages file window behind?
hi folks, the open pages 09 file has started moving with me when i switch from one desktop screen to the next. can someone tell me how i turn this function off? i have tried several combinations in system pref. to no avail. i used to enjoy having my