Lost Data on Macbook Pro

After I could not boot my Macbook Pro (OS X Lion 10.7.5) I tried to run safe boot. I thought it worked, but only thing it did was booting the mac without any data i used to have. All the software is there. It's like a brand new mac with full applications. My storage seems as full as before so I know the data is somewhere inside my Macbook. How can I find them? (I'm still logged in as I always were and there seems to be no other accounts)
I downloaded data rescue demo to scan. But for some reason my HD can't be scanned. When I tried Disk Warrior it says "Directory cannot be rebuild because this is the startup disk"
Trash is empty and spotlight does not come up with any data.
I know the ways that requires payment, but I (with my ignorant logic) conclude that since my storage is still seems full with everything I have I may not need it.

Your profile indicates your Mac has v10.7 Lion installed.
If that is correct, in order to repair the startup disk, you need restart while holding down the Command + R keys in order to access the built in utilities in OS X Recovery
Then hopefully you can restore your data a backup.

Similar Messages

  • Upgrading from Snow Leopard to Lion - couldn't complete as disk corrupt - went through everything - disk utulity, install disk etc. can't be fixed - grey screen - transferring data to macbook pro - unable to transfer photos - says locked volume - help

    Hello - tried to upgrade to Lion (software all up to date) could not carry out as disk corrupt - tried to fix using disk utility, no luck, tried through install discs, noluck, screen went grey, went through all the troubleshooting steps advised - could get hard drive button up but wouldn't launch - took the last troubleshooting step (before wiping hard drive) and transferred data to MacBook Pro - all fine except for iPhotos - comes up as "locked volume" - have been through all the trouble shooting steps to all read/write access - file info says I have read/write access- any ideas - otherwise I have lost a bucket load of photos :-(
    Thanks

    See this tip if your data isn't backed up:
    https://discussions.apple.com/docs/DOC-1689
    In the future always backup your data before updating.

  • How to erase all data on macbook pro and reinstall operating system

    how to erase all data on macbook pro and reinstall operating system

    OS X Snow Leopard
    https://support.apple.com/en-us/HT3910
    http://www.thesafemac.com/how-to-reinstall-mac-os-x-from-scratch/
    OS X Yosemite
    https://support.apple.com/kb/PH18869?locale=en_US&viewlocale=en_US
    Best.

  • How to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

    how to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

    ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
    or, you can read the link below on how to do it in dos mode.
    http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
    once you've formatted it - you can now use it in both your macbook and windows computer.

  • HT3275 Time Machine Error: The backup disk image "Volumes/Data/My Macbook Pro.sparsebundle" is already in use. (How do I correct this issue?)

    Time Machine did not back up:
    Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
    How do I correct this issue?
    Thanks!

    You need to be careful Bob.. people might take this literally.
    Bob Timmons wrote:
    How do I correct this issue?
    Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
    https://discussions.apple.com/thread/5222487?tstart=0

  • HT3231 What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air

    What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air

    As I posted "it is an Unknown", at least to me, what type FW port is on the OPs older Mac.
    LowLuster
    HT3231 Re: What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air 
    Dec 26, 2013 8:04 PM (in response to OGELTHORPE)
    But the newest Mac notebooks do not have a firewire port.
    So he may need a TB to FW adapter, $29, a FW 400 or 800 cable, $??, and then a FW 400 to 800 cable/port adapter (If the old Mac only has a FW 400 port), $??.
    It is unknown if the old Mac has a FW 400 or 800 port.

  • The backup disk image "/Volumes/Data/Neil-MacBook Pro (171).sparsebundle" is already in use. error message. How do I fix? Ideas

    "The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
    OS X 10.8.1 (12B19)
    " error message just started
    Mountain Lion
    OS X 10.8.1 (12B19)
    MacBookPro 2.53 Corei5
    All software update installed
    Time Capsule : 1TB, 599 of 998GB used
    What causes it?
    How do you fix it?
    How do you stop it happening again?
    Any ideas please

    Thanks for fast response.
    I already tried C12, no luck. I did read C17, but that did not help either.
    I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
    But where to do you sent this request to?  Doesn't seem easy to find a person to send it to.
    I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever.  Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
    I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum  Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool.  I don't want to be a mechanic, I want to be a driver.
    Thanks again for your help

  • HT3275 My time capsule reports an error The backup disk image "/Volumes/Data-1/MacBook Pro.sparsebundle" is already in use.

    Help !
    The last few days my time capsule reports an error       The backup disk image “/Volumes/Data-1/MacBook Pro.sparsebundle” is already in use.
    To make things worse I seem to be loosing my screen so need to make a back up ASAP

    Make sure that no other Macs are backing up at the time.
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    This will fix the issue about 98% of the time. If you are in the unlucky 2% category, please post back for more assistance

  • Impossible d'accéder à l'image disque de sauvegarde « /Volumes/Data-1/MacBook Pro de Olivier (2)old.sparsebundle » (erreur -1).

    Impossible d’accéder à l’image disque de sauvegarde « /Volumes/Data-1/MacBook Pro de Olivier (2)old.sparsebundle » (erreur -1).
    Merci de votre aide

    http://pondini.org/TM/C17.html

  • I can't transfer my data from macbook pro to iPhone 5?

    I can't transfer my data from macbook pro to iphone 5?????
    Is there anyone to help me?
    Thanks in advance.

    This should work, how did you do? Explain ‘I can’t transfer my files’. You are in the new mac, the older mac is connected via wl network or eth, it is detected and mounted, and does not work?
    Firewire would be better, probably with a 400-to-800 fw adapter (6 to 9 pin).

  • The image of backup disk "/Volumes/Data-1/MacBook Pro di Marco .sparsebundle" is used already. And I can't access to my time machine... :(

    Hi, today my time capsule has restarted a new backup, I don't know why, and also it has appeared this message: The image of backup disk “/Volumes/Data-1/MacBook Pro di Marco .sparsebundle” is used already. And I can't access to my time machine...
    Does anybody know what I've to do?
    Tnx!

    Yes, please check out this Pondini article for further details on how to solve this problem.

  • How I can back up my data from macbook pro that its hard drive seems to die soon?

         I need your help guys from the whole world.
    I am now in Erbil (North Iraq) and there is no apple authorized resellers or anyone who can fix macs, they can destroy them as they try to repair it ( this is what happened      to me recently with My I phone and I pad). So I am left alone to fix it with your global help I hope.
    The issue is, I didn't do back up on my mac book pro for over  a year. I woke up 3 days ago, switched my mac and there was this funny pinc ponc noise coming from the lower right hand side of my mac (between track pad and keyboard), the computer was going slow and I wasnt able to do anything even after few restarts. It is always too slow to perform anything and this noise always start after few seconds of starting and keep going. the computer can still function very well on guest account *(safari only) and I don't hear the noise then nor when I press T. But if I try to log in to all my drive or in safe mode I get this noise and none function computer. when I went to disk utility there was message in red to back up my data immediately and take the hard drive to authorized service center.
    I checked on internet, you tube  and others..and it seems I have faulty hard drive. Since I am here alone and no service center so I think I will replace it myself. But first thing first i need to back up my precious data. I found few ways of doing this and I wonder if you can give me some tips, advise or any other method to do the back up.
    1) Transfer data on target mode:  I havent done this before but I am thinking to connect my faulty macbook pro to another with firewire, pressing T on the faulty Mac and install Super Duper on the other mac. Then I connect external hard drive to the working mac via USB. And the question is     :      can I transfer the files this way to an external bootable hard drive connected to the working mac     , so the working mac will function as bridge between faulty mac and external hard drive. Also can I do this process through my old none intel based power book(which I am using now)  instead of borrowing macbook from friend?
    2) Buy new hard drive, open my mac and replace the faulty one. then put the faulty one in external inclosure, connect to refurbished mac and transfer data back. Can I do this? will I need to install the mac os from the CD associated with it before I do transfer?
    Is there any other way to do this please?

    Jassos wrote:
    Hi PlotinusVeritas
    where do I download the superdoper please?
    http://www.shirt-pocket.com/SuperDuper/superduperdescription.html
    its here:   
    Download the free trial now!
    This simple software is free and very easy to use, yes, it makes a 100% clone of ALL on your HD, everything.
    (assuming its not so dead it wont copy).
    you only need the free trial version to clone your HD.
    can I download it on guest account? this one I can login and seems to function fine.
    Then install same on your guest account, that wouldnt matter, since Superduper clones everything (except the recovery partition which you dont need in your case right now).
    LaCie is Seagate (lacie doesnt make HD) , yes, that would be fine,  clone your HD ASAP and hope it works.
    there is no software fix for HD hardware failure, ......this is why a backup copy of data is so very important all the time, period.

  • Lost sound on macbook pro

    Hi Macfriends,
    Running Macbook pro, 2.2 ghz, system 10.4.11. Latest updates installed. Had portable speakers plugged in (worked fine). After removing them i lost ability to adjust sound. I cannot move the slider bar (it is very light in color) and I can't grab it. Have played with sound preferences--it is not on mute...have tried restarting, disk utility says no problems. the slider bar is at top (loudest) but i can't grab it. The preference panel says "Digital Out----built in output". Am I missing something obvious.....Any thoughts? All help will be appreciated! THANKS!!! Joe

    UPDATE----FIXED IT!
    I plugged the speakers back in and the headphone showed up under output in sound preference panel. Plugged in and out couple times and "internal speakers" showed up. I selected it and wooo-la, it resolved itself! All is fine again in macland!!!!

  • How do i transfer my data from macbook pro to iMac?

    i just bought a iMac.  How do i transfer my itunes library, photos, files via bluetooth from macbook pro to my iMac?  Much thanks for your help!

    I believe that when you boot your computer for the first time and you are following the onscreen instructions you are prompted whether you want to transfer data from an old mac or PC. If you click 'transfer from an old mac' and follow the onscreen instructions, this may work.
    If you have already skipped this step you could use iCloud to transfer data. If you make sure that everything you want to transfer is synced in iCloud, this may also work.

  • Recover data unbootable macbook pro hd onto external hd

    2013 macbook pro got stuck installing mavericks with the error saying that it couldnt install because disk is damaged. restarted in recovery mode and tried to repair from disk utility but after hitting verify disk and repair disk it says it cannot repair the disk. tried to restart in safe mode to delete the installer download completely and start fresh but while starting up the computer just shuts off. i know i can reinstall mountain lion and then do a clean install of mavericks but i do not have a back up. so my question is how can i recover the data from Macintosh HD onto an external hard drive before reinstalling mountain lion and wiping everything?
    thank you so much.

    Possibly Target Disk mode will work:
    http://support.apple.com/kb/ph3838
    http://support.apple.com/kb/ht1661
    Ciao.

Maybe you are looking for

  • Reg : Box issue in sap script

    Hi Guru's, I have got requirement to show 2 boxes in main window so initially i wrote the BOX command in maindow and it was working fine for first page when it goes to more than one page box was not displaying in the output so that i reallized when i

  • Problem with Approve & Reject buttons text

    Hi Team, Once we have configured UWL in EP 7.0 & backed is SRM 7.0, facing problem in Approve & Reject Buttons text. Instead of showing Approve & Reject text on Buttons, it showing text like this  com.sap.pct.srm.core.action.oldwfl.approve  & com.sap

  • "Connecting to Motorola H500" and then "Could not pair."

    Here's my problem...my iPhone starts searching for devices, it finds my bluetooth device, then it asks me for the pin number, then it says it's trying to connect to it and then it tells me: "Could not pair with Motorola H500." Just last night (after

  • Refreshing the Output Table in ALV

    Hi All, Please let me know how to refresh the output table using refresh button in ALV. Thanks & Regards, Priya. Edited by: SathyaPriya Neelagaru on Jun 26, 2008 7:00 AM

  • Quicktime wont play anything

    I recently downloaded a .mov file and it played fine, but now quicktime suddenly stopped playing it. I double click on the file and it takes a while for quicktime to even open and when it finally does it wont play the file. It opens and the movie fil