Lost dictionary after firmware update...

any one can help me get back dictionary for nokia 6131
Malaysia
Nokia 6131
Code: 0534295
From
v03.72
29-06-06
RM-115 (c) Nokia
to
v05.50
20-09-06
RM-115 (c) Nokia
Help me plsMessage Edited by kiattz on 10-Apr-200706:51 AM

You can get the Chinese-English dictionary at the Nokia Asia Support site.Look for the Nokia 5300 Support PageLP.Message Edited by nj15 on 10-Apr-200711:49 PM

Similar Messages

  • Lost Internet after firmware update!

    I have use this router some years, and I have no problem, then I have made an Firmware update, and now sometimes I have lost internet, not connection but only Internet. Can I get a default firmware or where is problem?

    I have also had problems connecting to the internet
    I upgraded my WRT54G version 2 router's firmware to 4.21.1 last week, taking the opportunity to upgrade after the area I live in suffered a temporary power cut, which somehow caused my router settings to reset, even though the router was not switched on at the time.
    Since upgrading I can connect wirelessly to the router, but I cannot access the internet via wireless. I am using exactly the same settings as I did before the upgrade and also made a backup of these settings after the upgrade, but every day I attempt to connect wirelessly I lose my net access again (but by restoring the backup settings - the very same settings already held by the router - I regain my net access, but then the next day I have to repeat the whole process.
    Yesterday I tried disabling the wireless security, which allowed me to access the net again, but soon as the security is re-enabled, the problem reoccurs.
    I have a laptop, a desktop and 2 PS3s connecting wirelessly via the router and have had no problem with any of them until this upgrade. I have just reapplied my wireless settings & will try again tomorrow and will attempt using a wired connection and post an update as soon as i'm done.

  • Lost Contacts After Firmware Update

    Hi,
    I'm after a bit of help if anyone has any advice.  I flashed my N900 this weekend with the latest firmware update (it was Vodofone specific so had to flash it to the latest UK version).  I restored the backup after completing the firmware update and everything was great.  Hooked it up to PC Suite, ran the sync and it matched all 300 contacts.
    Last night I tried to edit a contact detail and it kept coming up with an "internal error" message.  I managed to do it by chaging the detail on my PC and syncing the contacts.  But today, when I looked for a contact my whole contacts list is gone!  It's wierd because my recent call history still shown names, but my contacts list is empty.  I synced my phone when I got home from work, but Nokia PC Sync completes the sync but I still don't see the contacts on my phone.  All the contacts are on the PC still.
    How can I fix this?  Any help will be much appreciated.  Thanks.

    No, none were on the sim card.  I ran the backup before the firmware flash and then restored after the flash.  That was fine for a couple of days, but now I have no contacts showing in my contacts list.
    When connected to PC Suite I can see all of the contacts from the PC, but when I look on the phone the list is empty.  This is why the sync isn't doing anything because the PC can still see all of the contacts.

  • Lost Bluetooth after firmware update 2.0.1

    After updating my 15" MacBook Pro with a Broadcom chipset I have lost the Bluetooth hardware. If I go to System Profile it says "No information available". If I try and do a Bludtooth set up in system Profile.... Network it says the system has no Bluetooth hardware. Any thoughts?

    Have you tried a simple restart? My bluetooth has been known to wander off at times (not on the Air but on my PB G4). You can try resetting the SMC: http://support.apple.com/kb/HT1411. This has helped me in the past.

  • Lost wireless after firmware update

    I updated the fimware on my WRT160N v3 and followed it up with a reset of the router.  I then restored the router settings that I had saved.  All the settings appeared to be good, but none of my wireless devices would connect.  I reneted the pass phrases (WPA2) but still nothing.  Tried to change the passphrase, still no good.  I then did a factory reset of the router from the setiings page and manually re-entered and save the settings, again nothing.  All of my devices are able to "see" the network and the correct SSID.  Not sure what to try next.

    If still that does not work follow the following steps:
    30/30/30 Hard Reset
    The following procedure will clear out the NVRAM and set Router back to default values:
    With the unit powered on, press and hold the reset button on back of unit for 30 seconds
    Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
    Plug the unit back in STILL holding the reset button a final 30 seconds....
    Then reconfigure the Router once again and then check the concern....

  • Data recovery after firmware update

    Hi guys,
    does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
    thx.

    if you didn't backup them, there is no way to recover them
    Greece Nokia X6 RM-559 v40.0.002

  • 3014 error i can't restore ipad after firmware update attempt

    3014 error i can't restore ipad after firmware update attempt

    See this thread with the same question.
    https://discussions.apple.com/thread/5045573?tstart=0

  • After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

    Hi
    After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right. 
    I can't see menus, just version number and the basic setup page.
    Router Linksys WRT160 v2.
    Allan

    Hi
    Thanks for the reply.  
    I't works ok now.  
    Thanks again.
    Allan

  • Restoring after firmware update - Ways :)

    Hi All,
    Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware.  I would like all to discuss to come up with some ways to restore their applications after firmware update.
    Before updating firmware
    Customer can backup his phone using Nokia PC Suite's Content Copier application.
    He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
    For his Contacts he can sync with pc suite supported sync applications.
    Messages he can store in Memory card and he can make a backup of memory card in PC.
    If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
    For Music he can use Nokia Music Manager or Nokia Music.
    Once after updating his firmware, if he is unable to restore he can get those from above said applications.
    If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
    Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

    Hi,
    If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
    you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
    Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth.  Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
    Its better to skip memory card backup while backup-ing other Phone data for faster backup.  Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
    Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
    Hope this could help
    I welcome our experts to add more details related to this topic.

  • Problems after firmware update 52.0.007

    Hi,
    I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
    But now I have following problems:
    I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
    The Radio app. is gone
    Does anyone has a solution for this?
    Iwan

    It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
    Happy to have helped forum with a Support Ratio = 42.5

  • There was add one and i lost it after the update and i don't remember it's name

    there was add one and i lost it after the update and i don't remember it's name
    it was add-on to show me the source of any click able content
    like pics on twitter or Facebook
    also the videos on youtube
    and it showed a little icons with small pic shape on it with different colors
    and also sometimes with a small lock shape on it
    now i need to know what this add -on name or how to get it back

    Add-ons are not auto-deleted as far as I know...
    It's possible that the extension or userscript simply doesn't work correctly in Firefox 22 due to a change in Firefox. If you look at the add-on pages, often the reviews will mention whether the add-on is broken in a new release.

  • Ovi Maps 3 don´t start after firmware update (6220...

    Hello!
    a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
    After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
    But Nokia Map Updater says, there are no updates for my maps.
    What´s wrong?
    Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
    thanks

    Hello!
    The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
    But in the meantime I have found a solution!!
    I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
    I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
     thanks
    sorry for my bad English

  • After firmware update ipod touch not working with my Sony Home Theater DAV HDX287WC any suggestions

    Is there a solution to play music from my iPod touch on my Sony Home Theater System DAV HDX 287WC after recent firmware/software upgrade? However, I am still able to play music through my ipod classic, but I am really missing the the functionality of the iPod touch with my home theater system.

    - Check to see if there is a firmware update for the theater system
    Sometimes this works but sometimes an IOS update breaks compatibility.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • C3-01 Problems After Firmware Update

    After updating the firmware from v5.65 to v6.0 the phone lost some features -namely:
    Chat
    Media Player
    Ovi Store
    "Favorite Contacts" on homescreen
    default wallpapers
    Solved!
    Go to Solution.

    Finally, I've fixed the problem!
    Going back, I updated the phone from 5.65 to 6.0 via OTA(over-the-air) update -in other words, I updated the firmware using the phone while connected to my home wi-fi network.
    In desperation to find a solution, I hesitantly re-updated the phone... But this time via PC.
    I opened Ovi Suite and updated the phone -again, expecting it would reinstall version 6.0 .
    After the update, all the apps that I've lost came back.
    I then checked to confirm if it was indeed version 6.0 -alas, it was not... It was version 6.05.
    Now, everything is working as it should be; mail, chat, ovistore, calculator, favorite contacts on homescreen -everything!
    It feels good to figure it out all by myself.  Hehehehe!!

  • Acer aspire 5560g Failing to boot after Firmware update

    Hey guys, So i recently upgraded my Aspire 5560g to Windows 8.1. I liked it but it seemed to have lost my drivers in the process (my track pad scrolling didnt work and my Dolby audio origram was gone). I went to  for the drivers and decided to start with a firmware upgrade (9545 for hard disk performance).  After the computer rebooted, I entered the dreaded Windows 8.1 boot loop. It would say "Your PC ran into problems..." with the bluescreen, then turn off. Then it would attempt the Automatic repair, and fail again, then restart the cycle. I wasn't able to even get into my BIOS until I cleared my CMOS, now at least I can get into BIOS. I created a bootable USB for Windows in hopes I could do a clean install, but even when trying to boot from a USB I get the blue Windows 8 screen, "Your PC ran into problems..."
    Is there a way I can undo the firmware update, it seems like the culprit, doesn't it?  Any help appreciated. Thanks EDIT: I've read that the Windows boot loop may be caused by outdated drivers. Think this could be the problem after I did the firmware update? How can I install the drivers without being able to boot into Windows? Thanks 

    Okay, I tried each stick at a time in both slots with the same results. Windows blue screened on both the HDD and the bootable USB. Isn't it too much of a coincidence that it started acting up after the firmware update?
    To be clear, it was a firmware update for the BIOS. The page is here for the Aspire 5560G: http://us.acer.com/ac/en/US/content/drivers I am open to more suggestions, I'd really love to get this working again after dropping the $ on Windows 8

Maybe you are looking for