Lost Display Never Timeout When Plugged In

I have a Droid X, using 2.3.  When I was at 2.1 (out of the box), there was an option for the display to never timeout when plugged in.  I have the dock that I keep on my desk, and it was a convenient to never timeout when plugged in, and revert back to my normal timeout setting when unplugged.
Did the option go away, or am I just not looking in the right location in settings?
Thanks,
knjsax

breezex,
You are the best!  Thanks.  That is my one complaint, there are so many options and settings, I can't keep them all straight.
Thanks again,
knjsax

Similar Messages

  • HT201250 How do you stop a Macbookpro with OSX 10.7.5 from turning off or logging off before timemachine is finished with the backup even though I have changed settings for energy management to "never" shutdown when plugged in to an outlet?

    My problem is my Macbookpro mid 2010 with OSX 10.7.5 seems to turn off or logs off before timemachine is finished with the backup even though I have changed settings for energy management to "never" shutdown when plugged in to an outlet?

    I had this problem on an IMac and I finally found a solution in an unlikely place. The problem was a security setting. I don't remember right this moment the exact setting and I am not on that machine right now but when I am I will try to retrace my steps to the fix. In the meantime check your security settings and any browser or browser extensions for computer log off settings. These settings are intended to prevent unauthorized use and incidentally screw up your backups. Hope this helps.

  • Ethernet never works when plugged in

    Ever since I got my ibook in 1/06 my ethernet has never worked when plugging in with a cable. I have tried several different cables/boxes/etc and it shows that it is connected with an IP address (when checking network status), but I cannot get on the internet. It has never been a problem before because I just use wireless instead, but now at my job my only option is plugging in. Any suggestions?

    Welcome to the Apple Discussions!
    ...but now at my job my only option is plugging in.
    Does your work have a proxy server in place? If so, you may need to adjust your Network System Preferences to reflect this setting. You'll have to ask as network administrator there if this is the case and to find out what the name of the proxy server is. The Network System Preferences may very well say you have an IP address, but without the proxy settings you won't get outside of your network to the Internet.
    -Doug

  • Thunderbolt display long beep when plugged in to macbook

    I have a MacBook Pro and connect it to a Thunderbolt display.  After downloading Yosemite, whenever I connect to my display it makes a long, continuous (about 1-2 minute) beeping noise.  The noise repeats every few minutes.  It is loud and high pitched.  I have connected to other Macs and the display does the same thing, so it is not coming from the computer.  Any ideas? 

    If you still need help, download the Thunderbolt Display manual here.
    Give it a minute or two to download then use the Command + F keyboard shortcut then type:  troubleshooting

  • Lost display resolution options when installing 10.4.6 with 20" monitor

    I recently installed an upgrade using black retail DVD 10.4.6 from 10.2.8, and now i only have one option for display resolution (256 colors). The screen is gray??? I can restart using 9.2 Classic and the screen display is just fine (thousands & millions of colors). I did the disk utility and permission fix prior to and before installation. I also updated the firmware. I tried to download 10.4.8 combo update, but the license agreement can't be 'agreed to' because the button will not appear on the low resolution screen. Do i have to initialize the whole disk? The Monitor is a 20" Display (the large blue monster). Since it was working with 10.2.8 and still works under 9.2 Classic reboot, i doubt whether its a hardware problem.. Any ideas?

    I wonder if it could be the Voodoo5 Dfx video card that's bn not compatible with 10.4.8?? It workds with 10.2.

  • I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • Cinema display goes off when USB cable plugged in

    WhenI plug my USB/firewire cable into the computer the screen goes black.
    I have used this display for years and never had any problems.
    The computer is about a year old but both have worked together since they first met!
    Any ideas?
    I see similar questions online but no reponse from Apple??!!??

    What kind of computer is it connected to?  Is there anything else connectted to usb?  If so try disconnecting them.
    Try smc reset.

  • T400 shake display when plug power supply s.o winxp

    Hello everybody
    Days ago I installed windows XP prof to thinkpad T400 , I used driver Intel Display Driver for Windows XP and ATI Display Driver for Windows XP but sometimes when plug power supply suddenly display start shake. please help me about of this
    thanks a lot

    Ok, as an electrical engineer...I have to step in here! LOL
    First, these amp rating are for 2 +12 rails. That is why you see a protection of around 15-18A on the +12 rail. That means each Rail is allowed up to 18A lets say for the new Enermax 1.2 version like the one I have.
    Now, Lets say 18A for 12V....well as you know the Abit NF7-S uses the 12V for powering the CPU.
    Lets say you have a Barton like me and you want it stable at around 2.4-2.5Ghz. You will have to put lets say around 2V to the cpu to get it stable at that kinda speed, specially if you have high FSB like I do. So 12V * 18Amps = 216W ....well the converter on the NFS-7 is really bad, its loss on the step down convertion is probably around 25% along with the PSU lost cuz its not running at 25oC (another 15%)....you will actually only get around 100-120W for the CPU.
    Now, if you go into Sandra and see how much a Barton eats up at 2.4Ghz you will see its around 110Watts.
    So, if you wanna push more, dont even think about it! Prime Power test fails and your +12 rail will drop as low as 11.60 Volts.
    Now, lets say you got yourself a AMD 64 bit chip and you wanna overclock it....I bet it will need more than 110Watts.
    So, what im saying is, dont buy nothing less than a 500 Watt PSU!
    You really need around 20-22 A on the main +12 along with really really good cooling on the case and PSU so it is running at a 100%.
    http://forums.amdmb.com/showindex.php?s=&threadid=287828
    i found this quite interesting especially the bit re the power loss turning the 12v into 1.6v or what ever cpu needs

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • My ipod displays an icon of a cable and the itunes logo but when plugged in, my mac says that it can not verify my device

    My ipod displays an icon of a cable and the itunes logo but when plugged in, my mac says that it can not verify my device.  I have a backup saved on my mac but it won't let me open it up or sync my ipod with my mac.

    Hi crcascio17,
    Thanks for visiting Apple Support Communities.
    You may want to try some of the suggestions in this article:
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Best Regards,
    Jeremy

  • Iphone crashed after update it wont recognise itunes when plugged in and do anything besides display itunes needs to be connected

    iphone crashed after update it wont recognise itunes when plugged in and do anything besides display itunes needs to be connected please help

    "I bought it a couple of weeks ago"
    Bought it from where? I ask because given what you have already tried, it would appear that this iPod needs either service or exchanging for another one.
    Did you buy this as new from a reputable source?

  • Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    If you think you're insane now, try maintaining those pop up menus.
    As far as I know, these menus have not been updated since FW 8, so 
    they are at least two versions old.
    Save yourself a lot of grief by avoiding those menus. There are many 
    other products on the market which do a much better job of creating 
    and maintaining this type of navigation structure.
    Read this link before you climb any higher on this slippery slope:
    http://apptools.com/rants/jsmenu.php
    There was another blog post by the fellow who originally wrote the pop 
    up menu feature, but I can't seem to locate it. Even he says stay away 
    from them.
    Not the answer you probably want, but I hope it helps, nonetheless.
    Jim Babbage

  • Ipod displays charging icon when not plugged in

    Hey, i have had a 30GB ipod video for almost a month now but recently it has had this problem. When i unplug my ipod from the computer, the charging icons do not turn into the default battery icon. It still says its charging. As far as i know it does successfully charge when plugged in, however i cant check the battery life becuase it always displays the charging icon.
    Also when i shut it down, by holding the play button, the charging screen is displayed. Im sure this is using battery life so id like to get the problem fixed.
    Ive tried reseting and restoring, nothing has worked.
    PS. I use the USB cable to charge, i dont have an AC adapter.
    Thank you

    Thanks, i wouldnt mind as much if i was able to see the battery life and be able to shut it down.
    Any idea what would cause this? Even after reseting and restoring?
    EDIT: Ok my ipod just now told me its out of battery life, after being plugged in all day.
    Now it is stuck looping from the apple logo to 'no battery life..', then reseting and repeating.

  • I was adding items with the intent of command z 'ing them back to their original when it crashed, autosaved, and my original numbers were lost to the temp numbers plugged in... how can i get back to the previous version? Because it had closed, command z

    I was adding items with the intent of command z 'ing them back to their original when it crashed, autosaved, and my original numbers were lost to the temp numbers plugged in... how can i get back to the previous version? Because it had closed, command z

    Sorry, this happened in CLOUD numbers....

Maybe you are looking for

  • I bought Adobe Acrobat Pro 9 and I need to reinstall it. Please could you provide me with a link. (I

    I bought Adobe Acrobat Pro 9 (in 2011)and I need to reinstall it. Please could you provide me with a link for download for MAC OSX. (I have the serial number in my adobe account.)

  • Does anyone have stateful plsql working in 8.1.7 (solaris) ?

    I've been trying to get stateful plsql working in 8.1.7 on a sun server (2.6). I've been through the OSE User's Guide and various other documents on Metalink regarding the setup of OSE. I appear to have OSE processing java servlets in a stateful mann

  • Group messaging....ugh!!

    First let me start off by saying my group messaging is ON. However, when I reply to a group text the group does not see it, it only goes to individuals. When I get a group text, it only shows up as MMS message (so I know it's a group) but it shows up

  • IPhoto Viewer Image Quality

    Working in iPhoto, I have uploaded all of my holiday pics to edit before making a photobook. Using the Adjust features I have been sharpening them up and setting the color balance, etc; however when I export the image as a JPG (using best quality set

  • Shared Objects and IOS 5.0+

    So, I need a straight answer. Can I use Shared Objects for my game, or will apple fail me for using them?  Will Shared Objects be backed up with iCloud? Thanks, diss.