Lost dvd of elements 11

i have my original dvd of elements 11 lost. I still have my serial #. how can I download a copy to my computer from adobe? Any help would be appreciated. Thanks george 456.

you can download the trial: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
and activate with your serial number.

Similar Messages

I lost my photoshop elements 7.0 serial number and i had not had it registered so i can't get it back. My old desktop broke and i would like to install photo shop on my new laptop. How can i get it back?

I lost my photoshop elements 7.0 serial number and i had not had it registered so i can't get it back. My old desktop broke and i would like to install photo shop on my new laptop. How can i get it back?

I would first go to your Adobe Account and make sure that all info in it was correct and then match up all S/N's with your records. If you find any problems, then make corrections.
If all matches, but does not work, contact Adobe and see if they still sell replacement DVD's for CS2. Adobe usually does, for a small price. Still, you will need your correct S/N, so you will probably be back on the phone to Adobe. When I once used them for a S/N problem, they were quick and did a perfect job.
Good luck,
Hunt

DVD from Elements 3.0 has no audio on Cyberlink Power DVD

I've burnt a DVD from Elements 3.0 which seems to go okay but when I put the DVD back in to the drive and open Cyberlink Power DVD, it plays without audio.
What's the griff with that?
Chummy

As a test of what Steve wrote, go back to PE, and Burn to Folder. Point CyberLink Power DVD to that folder and play from there. Do you get Audio?
I'm with Steve in that PE does a good, DVD-spec AC3 Audio file, that *should* play fine. CyberLink Power DVD is a good software player.
If you are not getting Audio, first place I'd check was the Audio setup on my system and then Ctrl-c from within Power DVD. What are the settings under the Audio tab there?
Good luck,
Hunt

My computer crashed and I lost my Photoshop Elements 11

I bought and installed photoshop elements 11 about six months ago and it worked fine so I threw away the packaging that it came in along with the product key. Just recently my computer crashed and I lost all my elements information. Is there a way I can get a new key or re-install it without having to pay for it again?

I bought and downloaded mine online and had a different email address at the time. Now my PC crashed and I don't know how to reinstall it. It's not showing on my new account with my new email address What can I do???

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

When burning a DVD from Elements 13, it freezes at 90%

when burning a DVD in elements 13, it freezes at 90% and locks up elements until I cancel burn.

Jerry Jarrett
If you wish to pursue your question about burn to disc, then I would be glad for the opportunity to be of assistance.
The following would be my troubleshooting strategy and questions
1. What computer operating system is your Premiere Elements 13 running on?
2. Have you looked at the issue with and without the Intel HD Graphics 2000 and Higher preferences disabled
(See Edit Menu/Preferences/General)?
3. Where are you in Publish+Share/Disc/, DVD, AVCHD, or Blu-ray? And, what does the burn dialog's Quality Area
show for Space Required and Bitrate? What brand/type/capacity disc are you using?
4. Is the issue specific to one Timeline in one project? Or, is the problem there with another Timeline content and another
project.
I would prefer to see you sort out the burn to disc issue if possible because of the download problems associated with the 3rd party software
that is typically needed to obtain the disc product from the Premiere Elements VIDEO_TS, BDMV, or ISO Image. Excellent 3rd party software if you
can get it installed without a lot of companion garbage. Although how to have been described for the safest possible download and install, there
are no guarantees that you will not be hit with a lot of computer cleanup just to get one excellent program.
ATR

Comment faire un dvd avec element 12 avec un diaporama et montage vidéo

comment faire un dvd avec Element 12 avec un diaporama et montage vidéo parce que la partie diaporama du DVD est floue.
1) photos propriété: 4000x2248 pixels, 72 ppp en .JPG,
2) diaporama : 1024x768 pixels 30 images/seconde .WMV
3) des vidéo: 1920X1080 pixels 29 images/secondes

Hi ,
Batch processing with NIK is not possible in Elements

Copying photos to DVD from elements 10

I know I probably just got burned by adobe, but how to I copy photos from elements to a DVD like in previous version of elements (8&9)? I AM NOT AND WILL NEVER PURCHASE "Premier", so if I lost functionality, I will be looking for a new application for photo editing and storing.
Can this be done? Can you copy to DVD straight from elements 10?
Thanks

Not if you're trying to copy a slide show. From the Help file:
http://help.adobe.com/en_US/elementsorganizer/using/WS1B271B2F-E57F-4f80-86F1-B3CBC3CDE38F _WIN.html
Slide shows are a fun way to share media files. With Elements Organizer 10, you can customize slide shows with music clips, clip art, text, and even voice narration. Images in PDF format do not display in slide shows.After you complete a slide show, you can choose several ways to share it.
You can save it as a PDF, convert it into a WMV file, and then burn it onto a VCD.
You can also save the file locally to print using Acrobat.
You can also burn it directly onto a high-quality DVD if Adobe® Premiere® Elements is also installed on your system.
Ken

Unable to view photos burned to DVD from Elements 11

I burned some photos (jpg and tiff) from Elements 11 to a DVD. When I tried to open the disc on the same computer, it didn't show any files. However, PSE.VolInfo.dat showed on DVD. I tried to open with Windows Explorer and with Photoshop Elements. When I put that same DVD in a different computer the pictures are all listed and open fine. I am wondering why no files are showing and why I can't open the pictures on the computer I used to burn them with and where the PSE.VolInfo.dat came from? How can I burn the photos to a DVD and be able to open them? Has anyone experienced this type of problem? Burned them to a CD also and experienced the same problem.

mikemoor wrote:
Well since nobody here responded, I called Verizon Tech Support directly. I was instructed to remove the battery while leaving the power on (that's important--do NOT power off!). Then depress the power button in succession twenty (20) times. Replace the battery cover and power up as normal. All fixed!!! Thanks to "Julius" at VZW. Obviously, this is some type of reset sequence for the Charge.
Depress the power button 20 times with the battery still out or after putting the battery back in?

No sound when burn movie to dvd (premiere elements 3, sony vaio, vista)

Hi,
When I burn a movie to DVD using premiere elements I end up with no sound.
Analyzing the VOB with avicodec reports it has no audio track - and I get the same problem if burn to a folder or direct to a disc.
Exporting to mpeg or other formats works without problem.
Also - when I try the burn, I find a large .wav file in the temporary files folder, which seems to match the sound the DVD should have.
But for some reason PE isn't combining it into the VOB?
My current workaround is exporting as mpeg, and importing this to moviemaker and burning from there - but it's a pain to do this.
I saw some posts about this topic from last year - and mentioning VAIO as a common factor - but none of the sugggestions there have worked, and I can't find any solution/new info. Apologies if I've missed something in the forums.
Any info/suggestions would be much appreciated!
cheers,
Mark

Sadly, we see a number of problems that are unique to the VAIO.
Sony is notorious for rewriting the operating system to fit their needs. Still, you'd think, if Premiere Elements came bundled with it, it would at least work with the system.
I highly recommend manually updating the operating system and firmware (these things become outdated weekly, and outdated firmware can really wreak havoc on your machine), clearing off the junkware, optimizing Vista and making sure you have the latest version of Quicktime and, if you're using Premiere Elements 3, that you have installed the 3.02 patch. These links to the FAQ library at the top of this forum will show you how.
http://www.adobeforums.com/webx/.3bc43f9a
http://www.adobeforums.com/webx/.3bc448a7
http://www.adobeforums.com/webx/.3c057647
And, if all that fails, it might well be worth a call to Sony, since they supposedly built and tested their machine and software before they sold it.

How do I burn photos to a CD/DVD in Elements 10?

I have Elements 8 and burning photos to a CD/DVD is very easy to do. I am helping someone who just bought a new computer and Elements 10 is on it. I tried on her version, but I couln't find how to do it. I couldn't even find a video tutorial on how to do it in Elements 10. She has not created an account yet - could that prevent access to the Adobe TV tutorials. I have had my version for two years and I forgot how I set it up.
Thanks for the help.

What kind of CD/DVD do you want to make? Just a data disc with photos on it? Open photos, then Editor>Share>More Options works for both macs and windows computers. In windows you can use File>Export in the organizer, too, or File>copy/move.
The tutorials that used to need the inspiration browser are now at tv.adobe.com. Anyone can watch them.

Lost installation disk elements 9 and need to reinstall. please help!!

I brought adobe photoshop elements 9 in May 2011, installed in onto my laptop with good intentions to use it but no idea how to. I decided to enroll in a photoshop course but in the meantime had my laptop de-cluttered, to which elements 9 was deleted, and have lost the installation disk while moving house. i have been told if i download a free 30 day trial i can enter my serial number after the 30 days has finished but now elements 10 is out i cant find a 30 day trial. please help in desperate need to finish my course !!!

download the trial PSE 9 from the below link and use your serial number to serialize it:-
http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

Creating a slide show DVD in Elements 9

Is there some way to creat a DVD of the slide show I assembled in Element 9 without having to purchase Premier Elements? I have no video files to process since I have no video camera. When I try to burn a DVD or CD with the side show a screen pops up saying I need Premier Elements. It seem to me that if I can create a slide show in Elements 9 I should be able to create a disc of it also with Elements 9.

Hey Brad,
If you are unable to select the shuffle images checkbox, follow the steps in this article -
iPhoto '11: Change slideshow settings
Specifically -
To display slides in random order, select “Shuffle slide order.” If you don’t see this option, play the slideshow, move the pointer to make the slideshow controls appear, and then click the Settings button.
Thanks for using Apple Support Communities.
Be well,
Brett L

From my combine DVD Photoshop Elements 11 & Premier Elements 11, only the photoshop one is listed in All programs and I can't edit my videos.

Hello.
MY DVD is a combine software for Adobe Photoshop Elements 11 and Adobe Premier Elements 11. I can not see the Adobe Premier Elements 11 listed in my ALL Programs. I have started to edit some of my photos with the Photoshop software and so far all going all right . But today wanting to give a go to the video editing I found that the software does not allow me to do it. I am using my new HP Envy laptop that I recently bought with the idea of learning to edit my home videos.
Any help will be most appreciated,

zoraidaq
What computer operating system?
Please excuse the question, but I do not want to take anything for granted. Did you install Adobe Premiere Elements 11? It is a separate install.
If you did.....
Assuming Windows 7, 8, or 8.1 64 bit for now, when you go to Control Panel/Programs is Adobe Premiere Elements 11 listed there?
And...
If you go to
Local Disc C
Program Files
Adobe
Adobe Premiere Elements 11
do you find a file in the Adobe Premiere Elements 11 Folder named Adobe Premiere Elements.exe? If so, please double click that. Does
Premiere Elements 11 open to the workspace bypassing the Welcome Screen?
What happens if you insert the Adobe Photoshop Elements 11 Adobe Premiere Elements11 installation disc in the burner tray, select Adobe Premiere Elements
11 for installation? Does the installation proceed or are you meet with a process which wants to uninstall rather than install?
Please review and consider. Then based on your answers, we can decide what next.
Thank you.
ATR

Boot Camp, Vista lost DVD drivers

I installed Vista on a Mac Pro, everything was working well. Oh for about 3 weeks, then for some unknown reason, Vista lost the drivers for the Pioneer DVD-Rw drives. I looked all over the net for Vista drivers for the Dives and nothing, (even Pioneers site) Does any one know were and how i can get the drivers reloaded, i did restored it to a point were the drives worked, and they still don't work, I get the yellow exclamation point, for both drives.. Ive tried making a copy of the CD in MAC, and transfer it over to the Window's but it will not allow me to "make changes to file folder"
Please help. (Window's game addict)

Post your question in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Lost dvd of elements 11

Similar Messages

Maybe you are looking for