Lost Ethernet Driver after semi-crash

MS-6278, P4 2.4
XP, sp1.
Well, I ignorantly turned on "High Performance Defaults" in the Bios ver. 1.3. System got freaky, barely able to get back into Setup to change to Normal Settings, but did do so. Then noticed Ethernet Driver in Control Panel was flagged: driver missing. A while later error message said trouble with Modem interface controller. Questions:
1.Do you think the crash caused these things?
2.Do I have to reload the whole Intel driver-set?
3.How can I list my computer system at the bottom of this page so I don't have to keep typing it in every time I post?
Thanks so much,
Jimminy

I may have had a similiar event I had loaded up the high performance defaults to see if it improved the game performance of Metal Gear Solid 2.I had no problems except trying to escape from the game ,but I mostly blame this on the fact that the PC release of this game is just a crappy emulator version of xbox.Still nonetheless it kindve partially locked up and I had to hit ctrl-alt-del to shut down the game properly.I restarted and reset the bios to the regular bios defaults (slow,private etc.) then put the comp into standby.When I came back my home network was down so I started messing around with the various connections and firewall which didnt help.I then decided to start top to bottom, so I started with the bios and low and behold for some reason under peripherals the onboard lan of my 865 Neo 2 LS had been disabled so I enabled it and this solved the problem.I know this problem isnt the same but it sounds to similiar so I offer up my own experience so good luck :D

Similar Messages

Lost ethernet driver after Hi-Perf Defaults

P4 2.4
865pe neo2 #6278
512 Mushkin
(Aurora) TNT2 Riva model 64
Windows XP sp1
Lost my Ethernet Driver in Device Manager after the following:
Tried the "Load High Performance defaults" in bios ver.1.3. Display freaked out with spots and lines. System slowed then froze. After reboot able to reset "normal defualts", and all OK except noticing the lack of said driver. Do you think one caused the other? Will I have to reload the whole mobo driver set? And why is the driver version on the mobo CD later than the ones available at the MSI and Intel websites,if I'm not mistaken? And one more thing - how can I get my setup listed out all nice at the bottom of this screen? Thanks.

In the BIOS make sure
>Integrated peripherals
ON-Board LAN = Enabled
Your previous drivers should still be there hopefully ...just your system doesnt see the LAN chip
For your system info use the "Profile" option at the top of the screen and then "Edit Signature"

Lost ethernet bundling after restart

lost ethernet bundling after restart

Do you mean "Link Aggregation" ??
There is a hundreds-of-posts-long thread going here:
Mountain Lion 802.3ad Network Link Aggregation - Mac Pro 2010

I am unable to erase hard drive after a crash, also cannot reinstall Lion because disk is locked. There seems to be nothing else to do, suggestions? Where do I go from here?

I downloaded Lion 100 days ago (conveniently after the 90 day tech support) now my HDD has crashed and it gets stuck at the apple screen. I then hold command R and go to disc utility try to repair, that doesn't work, and try to erase. But it says error, cannot unmount disk. I then try to reload Lion, but it says the disk is locked. Okay, so do I need a new hard drive? If so that's fine, I just cannot seem to erase this drive to reinstall lion. Also, I don't have a disk to reinstall OSx, as Lion is done via internet.

Wow, thanks. It did the trick. So now I am confused, do you think I still need to take in my Mac to see if there are some problems with the hard drive, or do you think I'm in the clear. I was going to get a new hard drive installed, because I thought that was the issue seeing as I couldn't access it during safe mode.

How to best restore lost User Accounts after server crash?

Our late 2005 G5 froze sometime overnight in the middle of a Time Machine backup. We had to do a hard reboot the next morning.
When OS X Server 10.5.8 came back up, none of our users could log in including our administrator accounts. Unable to log in as root, we used the utility on the installation disc to reset the root password. We were able to log in as root to see that our data and server disks still were intact and navigable. However, we could not see any user accounts defined. We then were able to log in as Server Administrator. Same thing.
We are unfamiliar with restoring anything from Time Machine backups other than user files. Is there a way to restore user accounts from Time Machine and how?
More info: we tried restoring some system files and the library folder but no luck. Not sure how to go about restoring Keychain if that got corrupted...We had about 10 accounts defined before the crash.
Carl

I believe the easiest approach would be:
- Install the same OS on the new servers
- Install OS pre-req software and packages for your EBS instance
- Restore from cold backup (if the crash happened directly after this backup and you haven't lost any data)
OR,
- Restore from hot backup (if the crash happened after your cold backup and you have data that wasn't part of the cold backup)
I assume that no changes to the hostname, domainname, IP Address, port numbers, directory structure, ..etc is taking place in this restore.
Thanks,
Hussein

Lost DVD-drive after installing i-tunes 8

Hi,
After i installed i-tunes 8 i lost my dvd-drive and clone-drive.
im sure it is i-tunes. i did an systemrecovery and my drives where back.
after installing i-tunes 8 again...... you guess same problem.
so i did systemrecovery and guess again.......problem solved.
can anybody help me with this problem????

Hi and welcome to the forums!
Here is a great post on drive lettering from MrFritz99. See if this address's your problem.
Thanks,
Bifocals
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

No Wireless or Ethernet Driver After Installing Vista Ultimate on New Mac

After installing Vista Ultimate 32 bit on my 17" 2.6 GHz MacBook Pro (486 gb hard drive, 101 gb bootcamp partition), (4 gb ram) The Vista Installation has no Driver Listed (or connectivity) for either the Apple Wireless or Ethernet drivers.
Any thoughts?

Did you install the drivers from the computer's software install DVD?
Please post further questions regarding Boot Camp in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Probook 650 g2 - Lost Ethernet adapter after updates

I ran Windows Update and also ran the Support Assistant recommended updates, which included a BIOS update. After restarting, all I have are Bluetooth and wireless network adapters, my Realtek Ethernet adapter is nowhere to be found in Windows. It is turned on in BIOS. I reinstalled the sp65789 driver, but this had no effect.
When I plug an ethernet cable into the adapter, I get no lights.

Hello @mbp2112 ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase or that need updating including the Ethernet drivers for your system and Windows 7.
You could also use the HP Drivers and download pages.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HT1751 how do you restore your playlists from the external hard drive after a crash

I have gotten my libary restored from the external harddrive after my computer crashed, but cannot restore the playlists. Do I really need to download software to do this or is there a better way?
Thanks

I should have added I could also restore my playlists from my one of the ipods, ipads, or iphones if anyone can give advice. I have turned off the auto syn in itunes so that I can plug them into the new computer.

Lightroom 5: Lost photo Book after Lightroom crash

LIghtroom shot down after crash and now only shows empty foto book. Pictures included in the book however are still shown as used in the picture bar. Is there a way to restore the original book without backup?
I'm working on a PC and restarting Lighroom and PC both failed.
thanks!

Without Backup- No.!
If you do have a Catalog Backup, it may be there.
Good advice is- always "Create a Saved Book" (that will be in the Collections Panel) when you have a basic design started. A "Saved Book" always updates as you alter pages and images in the Book module.
And always backup the catalog!

Lost CD drive after loading IPOD

First time user on any discussion board. After loading IPOD and itunes, access to CD Drive disappeared. Got the following message. "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
I removed the IPOD and itune program hoping the acces would return. Believe I can get help from a local technician to restore access to drive, BUT AM WORRIED THAT IT WILL HAPPEN AGAIN WHEN I TRY TO LOAD THE PROGRAM.
Any help will be appreciated.
Dell Windows 2000

hi Barbara!
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
for that one, see:
Cannot Access CD-ROM and "Code 31" Error Message in Device Manager After You Remove Adaptec Easy CD Creator from Your Computer
(note that despite the title there is at least one other cause of the code 31 listed on the document.)
love, b

Lost key commands after logic crashed

I've had my own set of key commands, exported and saved in Key Commands folder (also a backup), but (almost) everything flew when last night logic crashed.
Key commands related to keyboard shortcuts were still stored, but nothing to do with those associated to midi controller shortcuts (several sliders and buttons on my keyboard) !!! Arggghh! Tedious work to reassign it! Some help? Some advice to avoid next time the same happens?

Controller assignments are stored in the controller prefs, not the regular prefs.
Make sure you have backups of that too, it's right next to the regular prefs files. It's very easy for Logic to trash controller prefs without you realising it.

HT1386 using iPod nano with new hard drive after original crashed

My PC hard drive died. My iPod hasa bunch of music on it. I reloaded iTunes on my new drive. Now I can't load any music from iTunes to my iPod without erasing my current content. How do I fix this?

Transfer iTunes purchases by:
http://support.apple.com/kb/HT1848?viewlocale=en_USiTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer othre music by using a third-party program like one of those discussed here:
Copy music
- To retain app data and other information, connect the iPod to yur computer and make a backup by right clciking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup
Note that the Backup that iTunes makes does not include synced media like apps and music.

Lost sound driver after installing airparrot

I have a 2009 Macbook pro running mountain lion. I downloaded this program called Airparrot to stream my screen to my apple TV. While streaming it asked to download Airparrots sound drivers so I did. No im able to get sound on my TV while streaming and sound if I plug in headphones to the headphone jack but No sound trough my internal macbook speakers. If I go into system preferences there is no option for internal speakers.
I think when I installed Airparrots audio it deleted the internal speaker driver.
I tried restoring the system and still nothing
How do I get my internal speaker option back ??

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Applications/Utilities/ Audio MIDI Setup.app
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked?
If so, uncheck it.
Best.

[PA3927U] Ethernet Drive is lost after restart.

Hello.
I have major Issue - I cant solve it for months.
On a brand new Windows 7 Laptop.
After i install the latest driver and restart the machine, the ethernet drive is lost and "dynadock ethernet" on device manager is yellow.
I tried the following:
1) Complete Uninstall Via registry and REV-U Uninstaller - the installing the drivers again.
2) Uninstalling drivers via http://www.displaylink.com/support/ticket.php?id=297
Every time I Install again the latest drivers - everything works good.
how ever it does not save a restart and windows is losing dynadock ethernet driver every time.
any soultion.. please...

No solution ?

Lost Ethernet Driver after semi-crash

Similar Messages

Maybe you are looking for