Lost files in premiere pro after installing photosop

hi, I lost all my premiere pro files after installing photoshop. The same happened probably 3 months ago when I switched from full package subscription to just one program. Any help with that? is there a way to get my files back? I didnt backup my computer and I did put probably 3 hours of work into it....
please I'm desperate

If you cant undo (cmd +z) try to open an older autosave.

Similar Messages

How do i open Adobe Premiere Pro after installing it?

I just downloaded and installed this program and I can not open it. It is not showing up on my desktop as an icon and it is not in the folder that i saved it in. I also have run a full search of the computer and it says that it has been installed but i still can not find the folder it is in so i can open it. I have searched on the help section and have not found anything on this topic. HELP!!!

After installing, the appropriate files will be installed in Program Files\Adobe (Win) or Application/Adobe/ (Mac). Could you check the following folders to see if the files are there.
Also did the installer report any errors?
See http://blogs.adobe.com/vikrant/2012/05/download-install-a-cs6-trial/ for a walk through for what a typical download/install experience looks like, so that you can be sure that you followed the complete process.

Can't open Premiere Pro after installing from CC

Says there is an error and the program has stopped working... even before it starts working. Uninstalled and reinstalled, same problem. Restarted computer after install, same problem.
Any ideas?

If you have a Mac with AMD graphics hardware, it may be a problem caused by the CUDA framework, which AMD hardware does not need. I just fixed a problem with PPro CC not launching on my iMac (with AMD Radeon graphics) because of this.
If you don't have an NVIDIA graphics card, go to your main HD, then Library>Frameworks, and delete "CUDA.framework". Reboot and try launching PPro again.
If you do have an NVIDIA graphics card... the problem is elsewhere, sorry
BTW I have no idea if the same CUDA problem applies to Windows machines with non-NVIDIA graphics hardware.

How do I activate premiere pro after installing?

I didn't have internet when I got premiere and chose "Activate later" but now I can't find where I activate it at anywhere on the welcome screen, can someone please tell me how to do this?

What specific version of Premiere Pro?

How do I import mp4 video files into Premiere Pro Cs4

For sometime now, I've been finding it practically impossible to import video files into premiere Pro cs4 especially mp4 files which happens to be the commonest to me now, as I currently shoot with a Nokia Lumia 920 phone with Windows phone 8 OS. I have tried severally to convert the videos into various other formats using Xilisoft video converter version 7.7.2 and each time I do this, they would either not play fine in cs4 or not import at all.
Please what can I do to be able to import these mp4 files into Cs4 or what format or how do I convert them into a format that would play seamlessly for better editing?
Funny enough, I had once imported video files that were shot with the same phone and they worked well, just wondering why they aren't now.
Please any assistance would be appreciated.
Thanks
NKC

I'm happy to announce to you all that my "mp4 importing" issues has been sorted out. Now I import mp4 shot with the same Windows Phone 8 Device into Adobe Premiere Pro CS4. Only that for the moment, it doesn't play as fast as with ordinary player.
But how did I get it to work, you may wonder;
I simply installed Itunes on the system, I also installed an app called media monkey. I can't say which of the apps did the magic but the next time I tried to import mp4 files into Premiere Pro after these installations, it imported seamlessly.
Obviously there's a link between the required codecs and the itunes itself.
You may want to try it and hope it works for you.
Kindly inform us if it works.
Thank you all.
Cheers.

Im having trouble importing mov files into premiere pro on creative cloud, have installed quicktime

Im having trouble importing mov files into premiere pro on creative cloud, original problem was no video and only audio when I imported mov file, so I have installed quicktime after reading that may solve the problem,but now an error message reads codec missing or unavailable, any help would be appreciated

MOV is a wrapper... what is inside the wrapper?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

I have a Adobde CC account but when i open the app to download the different software, i have illustrator, indesign, photoshop, bridge to install but premiere pro, after effects, lightroom, etc. to "test"...???

I have a Adobde CC account but when i open the app to download the different software, i have illustrator, indesign, photoshop, bridge to install but premiere pro, after effects, lightroom, etc. to "test"...???
Before (2-3 monate before) i had no problem to access to lightroom & after effetcs...help me please. Thx

That's okay , besides I got nothing to do lol hehehe atleast I can make myself useful for someone else hehe
1)Navigate to C:\Windows\System32\drivers\etc and look for file named hosts inside etc folder.
2)Copy the hosts file to Desktop and open the same with notepad.
Check with the hosts file entries , let me know if there are any Adobe entries like 127.0.01 xxx.,adobe.com .activate.adobe.com....etc?
If there are no Adobe entries in Hosts file .
If you wish , you may uinstall and reinstall the app .
You may try below steps :
Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, locate Adobe Creative Cloud and uninstall it.
End all Adobe related Tasks from Task Manager.
Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe
Once the installation process is completed , sign in and check.
Still same issue ?? let me know

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

Sony NEX-5N AVCHD 2.0 1080p50 and Premiere Pro/After Effects CS5.5

Hi all,
I have a new Sony NEX-5N and have shot some test 1080p50 video using it.
On my quest for some new editing/production software to close the loop I have just downloaded and installed a Trial Version of CS5.5 Production Premium.
I am able to load my video files into Premiere Pro.
However, when I attempt to open the Video File in After Effects, I recieve the following Error message:
   After Effects error: '00023.MTS' cannot be imported - this '.mts' file is damaged or unsupported.
I have tried renaming the extension to .MPG, .M4V, .M2TS all with exactly the same result.
Perhaps this is a limitation of the Trial Version or perhaps a limitation of After Effects CS5.5. Is anyone able to advise?
As extra information I include below the TEXT output from MediaInfo for the file I am able to load into Premiere Pro CS5.5 but not After Effects.
Thanks.
General
ID                               : 0 (0x0)
Complete name                    : F:\AVI\Video\SourceMedia\00023.MTS
Format                           : BDAV
Format/Info                      : Blu-ray Video
File size                        : 61.8 MiB
Duration                         : 19s 616ms
Overall bit rate mode            : Variable
Overall bit rate                 : 26.4 Mbps
Maximum Overall bit rate         : 28.0 Mbps
Video
ID                               : 4113 (0x1011)
Menu ID                          : 1 (0x1)
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 2 frames
Format settings, GOP             : M=1, N=12
Codec ID                         : 27
Duration                         : 19s 680ms
Bit rate mode                    : Variable
Bit rate                         : 25.1 Mbps
Maximum bit rate                 : 26.0 Mbps
Width                            : 1 920 pixels
Height                           : 1 080 pixels
Display aspect ratio             : 16:9
Frame rate                       : 50.000 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.242
Stream size                      : 58.8 MiB (95%)
Audio
ID                               : 4352 (0x1100)
Menu ID                          : 1 (0x1)
Format                           : AC-3
Format/Info                      : Audio Coding 3
Mode extension                   : CM (complete main)
Codec ID                         : 129
Duration                         : 19s 680ms
Bit rate mode                    : Constant
Bit rate                         : 256 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Compression mode                 : Lossy
Stream size                      : 615 KiB (1%)
Text
ID                               : 4608 (0x1200)
Menu ID                          : 1 (0x1)
Format                           : PGS
Codec ID                         : 144
Duration                         : 19s 135ms

Hi and thanks, this is exactly what I am looking for :-)
Tim Kurkoski wrote:
Other question: Is it just this one file that fails to import or is it all files from that camera?
All of the clips I have recorded fail to import to AE but work in PPro
Tim Kurkoski wrote:
Can you post a sample file that exhibits the problem so that I could try the clip on my machine?
I just recorded 4 seconds of a clock pendulum swinging, surprisingly the file was 20Mb!?!? Anyway, I have made the file available for download at the following location:
http://andrew.net.au/~rowan/avchd/00032.MTS
You can browse the directory at http://andrew.net.au/~rowan/avchd/ if you need to "right-click" and save as.
I am hoping it is a limitation of the trial as I have noticed a few other "gotchas" with the trial version.
Thanks for the advice about video format, I have noticed that my computer (Core 2 Duo) is very slow to process the H.264 stream, PremierePro cannot play the 30sec stream in realtime (starts to stutter around 23sec) and After Effects starts its stutter almost immediately (both just playing the stream with no effects) - that said WindowsMediaPlayer has no problem playing the same stream at full speed. I am however reluctant to do any transcoding except to a lossless format as it seems counter intuitive - but this will be the subject of another post, as I don't want to clutter this one.
Thanks again.

Can't import prores files into Premiere Pro CC or SpeedGrade CC

Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
I also can't export to DNxHD files to an MXF file either.
I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
Conflict?

I only have one account on the computer and it has Administrator priveleges. What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator"). I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator". Also, your answer still does not address the fact that I can't use my jog wheel.
Anyone else have some ideas?

Integration of other Adobe products..Premiere Pro, After Effects, Audition, Encore DVD

Prior to obtaining CS2 I have been working with the other video/audio Adobe tools; Premiere Pro, After Effects, Audition, Encore DVD.
I fully expected to see integration of these products into the Bridge application after CS2 installation. I was disappointed, there does not appear to be any such integration. I do hope that this is in plan, and that I don't have to spend an "upgrade" fee to use integration that should have been there to begin with.
Even if there is no further integration, it would be nice to be able to continue using the Bridge as my "file manager" in the event I have to transfer my CS2 activation to another computer; after all I still have 4 licensed Adobe products installed on the machine, even if there not, quote, CS2 applications.

I can't use Bridge with my video products anymore. I have 3 systems in my personal development environment. I am now past the 30 day period before activation of CS2 is required on my video editing machine. Now I am no longer able to use Adobe Bridge with my other Adobe (video) products.
Also, now I've noticed that the next level of video products is available, they now have Bridge integrated. As I anticipated in my first append, I cannot continue using Bridge with my Adobe video products unless I spend more money for an upgrade. If the intention is to have Bridge become an integral tool in the creative process, this policy is short sighted. It can't be that difficult to bring out an update for the CS2 level of bridge that would enable it to work with users that have AE 6.5 or PPro 1.5 installed.

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.
How do I around this problem?

We need to know a lot more if we're going to help you.
What happens when you try? Do you get an error message? If so, exactly what does it say?
What version of Premiere Pro? Have you installed the recent updates? What operating system?
Does this happen for all .mov files or just some? Has this ever worked before? What version of QuickTime do you have installed?
Here's a page written for After Effects, but the information is relevant to Premiere Pro and AME, too:
http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

Unable to play Cineform avi files in Premiere Pro CS3

I am using Cineform NeoHD version 5.3.2 to convert the MXF files from my Canon XF300 into Cineform AVI.
Then I import these AVI files into Premiere Pro CS3 and here is where the problem begins.
Premiere is unable to play these Cineform files. All I get is about a second of audio, and a still frame of the video. This happens both in the source window, and also on the timeline.
The Cineform AVI files play perfectly fine when using Virtualdub for playback, but Windows media player behave just like Premiere.
Everything worked fine a week ago. Premiere appeared to use something called "ffdshow" to play the Cineform files, and I could edit without any trouble.
A few days ago, when I tried the same, that's when the problems came. Whenever I hit Play button in Premiere, a popup window came up, saying Premiere wanted to use ffdshow, and the options was "never", "no once", "yes once", "yes always".
When everything worked a week ago, I had to use the "yes always" option.
Now, it does not matter which option I use, Premiere will not play the Cineform files.
I did not make any changes to my computer between the day everything was okay, and when the problem appeared.
A Cineform representative suggested "ffdshow" is the troublemaker, so I uninstalled ffdshow and removed any traces of it I could find, but the same problem still exist.
Then I uninstalled Cineform NeoHD
Uninstalled and reinstalled Production Premium CS3 suite
Reinstalled Cineform NeoHD
Still same problem, nothing has changed.
It does not matter if I use 50i or 25p source files.
My system: (Laptop)
Windows Vista ultimate 64-bit
Intel 2,66GHz quad core CPU
4GB ram
Nvidia Geforce 8800M GTX
3x internal 7200rpm harddrives set up with raid-0
Anyone else experiencing this?
Any ideas what might be wrong?

dont know , but this stuff might fix your prob.. overwrite whatever ffdshow screwed up...
cfrepair utility:
http://www.siliconimaging.com/DigitalCinema/SiliconImaging_support.html
cineform codec (neo player)
http://estore.cineform.com/NeoPlayer.aspx
never used the cfrepair thing..but did install neoplayer which gave me the codec to use cs3 with cf raw files ( sample of cf raw at the si 2k site -- avi ext )
ps.... to keep overhead down on my computer I took the resulting cineform "player" out of my startup directory....as it wants to run in background when you install it...no need for that for my purpose of just getting the codec

Unable to link media to MTS files in Premiere CS6 after updating to 10.8.3

I am now unable to link media(MTS files) in Premiere pro CS6 after updating to 10.8.3. Instead of the folder where the MTS files where there is now "AVCHD" with the quicktime symbol. When I control click, it just offers me with the quick look option. Any advice would be very much appreciated.

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Importing mov files in premiere pro cs5

I just installed Adobe Creative Suite 5 Master Collection on my machine and now, i have two issues.
1. I do have the latest quicktime installed but when i try to import *.mov files with audio, only the audio is imported and works fine. the video isn't, but I dont get a dialogue error box.
A). if the *.mov file has only video, i get a file import failure message saying " the file has no audio or video streams".
2. the next prob is my dymanic linking does not work.
Help please

Im trying something and I hope you can help me. I have two computers, one dedicated to capturing a event and the other I have is dedicated to playback. They share the hard drive via a network. What I want to know is- is there a way for the dedicated playback machine to access a video file that is still being captured by the capturing machine and play back parts of it in a sequence??
Gosford Lawrence
!https://www3.oovoo.com/oovoocallme/images/btn1.png|height=68|alt=http://webvideocall.oovo o.com/callme/gosford/236|width=123|src=https://www3.oovoo.com/oovoocallme/images/btn1.png| border=0!
Date: Thu, 21 Apr 2011 17:40:14 -0600
From: [email protected]
To: [email protected]
Subject: importing mov files in premiere pro cs5
Zone Alarm, eh? I used to use that program, but it got in the way of almost everything that I did, that I canned it completely.
Glad that removing ZA solved your issue.
Personally, I find MOV Animation CODEC to be quite good, and use that for a lot of work. Jeff Bellune, here, like the Photo JPEG format, but I have not explored that.
Good luck,
Hunt
>

Lost files in premiere pro after installing photosop

Similar Messages

Maybe you are looking for