Lost firefox, tried to reload 5 X with initial not future success--help

After aborting a game installation, lost firefox. Tried to install 5 X but it would only open initially after each new installation but once closed, would not open again. The 5th time, it did not even open upon installation. Can you help?

Try installing it from your control panel.
Then do a clean install of it.

Similar Messages

I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8). If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
Insert the disk then power down
HOLDING the C key, power up to boot from the disc.
Get to Disk Utility
If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
When it completes the Repair process successfully as indicated in DU, do a shut down. If Repair is not successful then an different course of action is indicated below.
Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM DO NOT ERASE THE DISK OR VOLUME FIRST. REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system. After re-installing the OS do a software update. Note that ERASING the disk is NOT required to do an OS re-install. This allows your existing data and application files to remain.
If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk and try a re-install.
If that fasils then you may have a defective hard disk.

I have a macbook version mac os x 10.4.11 and im trying to download PAGES however its not working! help!!!

I have a macbook version mac os x 10.4.11 and im trying to download PAGES however its not working! help!!!

The latest iWork '09.2 requires 10.7 Lion. You can go onto eBay and get the '09.0 or the '08 version which will work with 10.4. http://en.wikipedia.org/wiki/IWork
iWork '09 http://www.ebay.com/sch/i.html?_sop=12&_ssov=1&_fln=1&_sacat=0&_sc=1&_nkw=iwork+ 09&rt=nc
iWork '08 http://www.ebay.com/sch/i.html?_nkw=iwork+08&_sacat=0&_odkw=iwork+09&_sop=12&_ss ov=1&_osacat=0&_fln=1&_sc=1

When trying to copy and paste on my MAC using firefox, I keep coming across a message "your browser security settings don't permit the editor to automatically execute pasting operations". This only happens with firfox, not Safari. any help??

When trying to copy and paste on my MAC using firefox, I keep coming across a message "your browser security settings don't permit the editor to automatically execute pasting operations". This only happens with firefox, not Safari. any help??

See:<br />
http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
https://addons.mozilla.org/firefox/addon/852 - AllowClipboard Helper

My Iphone 5 has some issues when I tried to restore it, I could not, can someone help please?

My Iphone 5 has some issues when I tried to restore it, I could not as it is displayed "iTunes could not contact the iphone software update server because you are not connected to the internet Make sure your internet connection is active and try again, while I am connected to the internet. can someone help please?

Hi, Jam 974.
Here is an article I would recommend going through when experiencing this issue.
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
Cheers,
Jason H.

On my mac firefox 4 and 3 i can't simply even open it, it just crashes and crashes, although if i try to open it in another acount yes it opens, i'ts like my account has a problem with firefox (tryed cleaning it all with appzaper, but nothing)))

Hello,
I have an iMac osX snow leopard (newest version) and strangely since some months, strangely when i tryed to open firefox it started crashing, firefox 3 and firefox 4 beta, i open them and in 5 seconds they crash.
Strangely enough on another account on my mac firefox WORKS perfectly, and it seems it's only crashing on my account, i even used cleanmymac and appzaper to clean totaly firefox files and re install it.
Please help me i can't stand chrome going so slow with 10 tabs

Thanks Sig for getting back to me. I really do appreciate it! But I'm not sure how erasing my drive is going to help. And besides, my problem is that I can't even boot to my original Tiger install DVDs anymore. I'm unable to execute any kind of boot-level command -- including holding down "c" key to boot from the drive, holding "T" key to go into Target Disk Mode or holding down "option" in order to bring up my bootable partitions!
Holding down any of these keys after the boot chime simply causes the screen to go black and then hang. The DVD drive will show it's being read from but nothing ever comes up.
Since I can't boot to my install DVD, there is no way for me to access the Disk Utility to erase my hard drive. Do you see the problem?
I am able to boot to my Windows 7 DVD, since I was able to install that to my old Tiger Partition, but I don't see how using my Windows install DVD would help me to re-install OS X.
I need to figure out why none of my boot-level opterations are available. If I was able to boot to my original Tiger discs (or any OS X DVD) than my problem would be solved, but I can't do that!
Any other ideas? Thanks in advance! --e

Despite having the File Associations in both Windows Control Panel and Firefox Options set to Windows Media Player for *.mwv files Firefox tries to open them with Foxit pdf Reader, which bombs out - what now?

Making this entry from my Linux computer which handles the situation correctly.The real situation involves only a Toshiba laptop running Windows XP.

I used this link for tiff http://www.nrl.navy.mil/content.php?P=IMAGES
QT was opening the tiff files. When going into the QT control panel Browser>Mime settings>Images-Still image files I was able to uncheck tiff, which held. I was also able to uncheck all the file types under File Types tab(Images-Still image files) in the QT control panel. However the preference would not hold. Went into Start>Set Program Access and Defaults that also was of no help.
The only way I was able to get QT to release the tiff's from the website I posted was to go into the Folder Options control panel for File Types and change the tif & tiff from QT picture viewer to windows picture and fax viewer.
So not sure why the QT control panel will not respond, there are other file types in the Folder options control panel on this computer other than tiff's that are still associated to QT, but didn't try changing them, perhaps that needs to be done?
Good post I didn't realize this before reading your post, if I come across anything further I'll post back.

Trying to share movie with "Expert Settings" - nothing happens (help?)

When trying to "share" (export) my movie, if I select the "Expert Settings" option, nothing happens. That is, if I select "Expert Settings" and click "Share", then a dialogue window displays briefly and disappears, and the main iMovie window returns.
I'm running iMovie 4.01 on Jaguar. I tried deleting my iMovie prefs and the ~/Library/iMovie files, didn't help.
My iMovie project was previously corrupted somehow, I started a new project and imported the old ".mov" file to try to salvage it. This seems to have worked somewhat (I can play the movie and I can export it in some formats). But I can't use expert settings.
Help?
Neal

Two things you might consider:
- QuickTime export may fail if the ~/Movies folder is missing. Re-create that folder if that is the case.
- iMovie 2.1.1 can't export to QuickTime if Roxio Toast Titanium 5.0.1-5.1.1's Toast Video CD Export 1.0 is in iMovie's Resources:Plugins: folder. Toast Titanium 5.1.2 installs Toast Video CD Export 1.4 which fixes this. With new Toast versions this is not an issue.

JPEG images burned to DVD are viewed fine on my Macbook Pro, but my clients PC says the disk is blank. Have tried several times now with same result. Please help.

The JPEG images I have edited on my Macbook Pro and then burned to DVD view fine on my computer. But when I give the same disk to my client with a PC (Windows Vista), his computer says the disk is blank. I have tried several times, first I burned the entire folder to the DVD, then tried burning just the images (not in a folder), and I also tried renaming the disk (shorter name, six letters), but always with the same result. His PC says the disk is blank and needs to be formated.
Please help,
Tim

timothyfromlakewood wrote:
I used "finder" to select the files and move them to the mounted blank DVD then selected "Burn to DVD" it then asks you to name it, and says "this disk can be used on any mac or windows based computer" or something to that effect, and I click "Burn" and it burns and verifies the contents. But it hasn't worked so far.
I will try again the way you suggest (fingers crossed).
The problem is likely on the client's computer.
Some computers can't read certain brands of disks, same thing occurs on Mac's.
If you work with this client often you can find out which brand of disk works best with yours and their computers.
DropBox is a online service

My iPhone 4S just replaced the names of my contacts in text messages and my favorites with only their phone numbers. Names are gone. The option to add new contacts also appears to be gone. I tried the *228 and it did not work. Help!

My iPhone 4S has replaced the names of my contacts in text messages and under my favorites- only their phone number shows. I updated today but this actually happened beforehand. I have tried restating the phone, and also *228. Neither have worked. Can someone help me??

My wife is having the same problems as a reciever. She works in a school as a teaching assistant and her teacher sends messages that are mixed with previous texts from ages ago.
Can anyone shed some light on this problem or is it only her and this poster?
2m42s

Trying to find ResultSet empty or not - Error - please help

Purpose of the code : I am trying to see if the customer or user is in the database.
Error : Cannote convert boolean to resultset
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
     pageEncoding="ISO-8859-1"%>
<%@page import="java.sql.*"%><%@page import = "java.sql.ResultSet" %>
<%@page import = "java.sql.Connection" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Getting Database Connection</title>
</head>
<body>
     <%
     ResultSet result = null ;
   Connection connection1 = null;
try
       String driverName1 = "oracle.jdbc.driver.OracleDriver";
      Class.forName(driverName1);
      String serverName = "localhost";
      String portNumber = "1521";
      String sid = "XE";
      String url = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
      String username = "SYSTEM";
      String password = "password";
      connection1 = DriverManager.getConnection(url, username, password);
      out.println(connection1.isClosed());
      String Name = request.getParameter("name");
      String Age = request.getParameter("age");
       int AgeConvert = Integer.parseInt(Age);
       String ADR = request.getParameter("address");
       String sqlInsert = " INSERT INTO ADDRESS (NAME,AGE,ADR) VALUES ('" + Name + "' , " + AgeConvert + ", '" + ADR +"')";
       Statement stm = connection1.createStatement();
       stm.execute(sqlInsert);
       out.println(" User Created");
catch(Exception e )
     out.println("User not created");
     e.printStackTrace();
%>
<table>
<tr>
<td> <b>To search the User Please enter the name in the below box </b> </td>
</tr>
<tr>
<td> Name </td>
<td> <input type = "text" name ="userName" /> </td>
</tr>
<tr>
   <td> <input type ="submit" value = "Search" /></td>
   </tr>
</table>
<%    ResultSet results = null ;
     String userNameToBeSearched = request.getParameter("userName");
     String sqlselect = " SELECT * FROM ADDRESS WHERE NAME ='"+userNameToBeSearched+"'";
     Statement stm2 = connection1.createStatement();
     results = stm2.execute(sqlselect);
     if (results.next()) {
         %>
         <TABLE BORDER="1">
            <TR>
               <TH>Name</TH>
               <TH>Age</TH>
               <TH>Address</TH>
            </TR>
           <TR>
               <TD> <%= results.getString(1) %> </TD>
               <TD> <%= results.getInt(2) %> </TD>
               <TD> <%= results.getString(3) %> </TD>
          </TR>
       </TABLE>
     <%
     } else
    out.println("User not found");
     %>
</body>
</html>

DrClap wrote:
jverd wrote:
Better still, use PreparedStatement and its parameters, rather than trying to escape/quote stuff yourself. I can't think of a single case where there's any good reason to use Statement rather than PreparedStatement. (Though I'm sure somebody will come up with one.)
Also, don't put Java code in a JSP. Certainly not DB access code. Icky bad.And don't leave your connection open after you've finished using it. Close it in a finally block to make sure it gets closed no matter what.
And you should be using a connection pool in a web application rather than repeatedly opening and closing connections. Let the container handle the pool and get your connections from it via JNDI.
There we go. That's the usual lot of bad practices, isn't it? I don't think we missed any......and I would like to add this...dont do these type of business logic in a jsp. It is just a view...these works are of controllers'. You should follow MVC rules unless you want to fell in some real problems .

Firefox 7.0.1 for Mac will NOT download successfully

I am about to quit using FF for good, I am so frustrated. When I click on the Update to FF 7.0.1 for Mac, the URL shows in a new window, and a "data transferring from xxx" shows at the left bottom of the window, which is blank. Once or twice the blue download bar at the right bottom of the same window, but it seems to stall. And after half a dozen tries, I NEVER get a prompt notifying me of a successful download, and the only dmg file on my hard drive is for 3.6.8.
HELP!

You can check if you have enabled HTTP pipelining or have other <b>network.http.*</b> prefs that have been modified and do not have the default value.
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
See also:
*http://kb.mozillazine.org/network.http.pipelining
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

I have the most recent/current version of firefox, but my gmail says I do not. Please help!

I have version 19.0, but when I try and open out gmail, it keeps sayting we do not have the lates browser and to please update it. I HAVE the latest firefox. The same thing happens when we try and open our msn mail as well

Could you check your useragent results on my test page?
http://dev.jeffersonscher.com/jstest.asp
Try disabling all nonessential and unrecognized extensions on the following tab to see whether one of them is sending this old version information:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
After restarting Firefox, hit the test page again. Any difference?

ODS, Inventory cube, and WM- Trying to run a report but not working! Help

Hi Gurus,
Hope somebody can help me here....
I have an Inventory Cube and an ODS on Material Plant and another on Warehouse Management. For my reports I need fields from three of them so I created a Multi Provider by using these. But I have only Material and Plant as common in three of them, which is used in defining the Multi Provider. Along with these I have used some more characteristics which are not common. So now when I run a query on this MP, I am getting a display wherein the common characteristics get the values that are correct but for uncommon chars the values for the kfs from other data targets become blank and an additional row comes too.
For example, I have kfs like Blocked stock in the cube and in one of the ODS I have kfs like standard price. So, in the query for the char material group which comes from the ODS there are no values for Blocked stock, I mean I can see a row wherein there is a value for Blocked stock and a blank for Standard Price, in the additional row there is a blank for Blocked stock and a value for Standard price. This is the case with all the other kfs of different info providers.
Is it because they are not common in all the info providers? Is there anyway to solve this? RRI will not work as I need the KFs from both the info providers.
I am stuck now with this problem, so any guidence would be a BIG help.
Thanks

Is it because they are not common in all the info providers?
-->Yes
Is there anyway to solve this?
--> Yes and no. If there is a join condition between the ODSs that you can use to get the fields on the same row, you can do an infoset.
--> To achieve something like an outer join, you can create RKF for your base KFs, and restrict them on uncommon chars with 'constant selection'. This may not work in all cases. Search for a blog by Prakash Darzi on 'Constant selection' to understand this.
If logically there doesn't exist a relation (try to visualise how you will derive your output row if you were given these two in a file or spreadsheet - is there a logical link to connect the two sets of data?) you cannot expect the results that you look for.

Report with BDC not displaying success message when run in Background

I am running a BDC report in Background mode.The below statement is not capturing the Success message when a document is posted.But when I am running the same in ForeGround mode it is capturing and is displayed in the output.Can anyone please help me in understanding why this is happening and how can I resolve this.
CALL TRANSACTION 'MB1C' USING bdcdata MODE mode UPDATE 'S'
MESSAGES INTO messtab.

Hi Madhu,
I think your BDC didnt generated any document when you run it in 'N' screen mode.
Debug your program when you run it in background
Goto Tcode :SM37
Select the job ( march checkbox )
==> in command prompt enter 'JDBG'
==> Then you can start reexecting the job .
You can check the sucess messages accordingly in debug mode
Also add a read statement on messtab for msgtype = 'S'.
Thanks
Bhanu

Lost firefox, tried to reload 5 X with initial not future success--help

Similar Messages

Maybe you are looking for