Lost function key special functions - flash cards?

I seem to have lost the function key special functions which I think is related to flash cards. The function LED illuminates but pressing a function key has no effect (brightness, hibernate, monitor switch etc.).
How can I restore the function. I can't find anything under Toshiba Assit utility.
Thank you
Richard

Hello Richard
When you press FN button the Flash Cards should be shown at the top of the display. If nothing happens you can try to restart Flash Cards. This option you can find under START > All Programs > TOSHIBA > Utilities > Restart Flash Cards.
Please try it. If this will not helps please restart your notebook. Be so nice and post the result.

Similar Messages

  • How to use the Function keys as function keys instead of action keys?

    When I press F1 or any of the other F keys it does what the symbol says on the key (volume/skip track etc).
    How do I actually use the F keys and not the symbols?

    Hi again John,
    ...is there a way to switch that around so I use the "fn" key for sound etc?
    Do the following:
    1. Fire up System Preferences
    2. Select Keyboard & Mouse
    3. Select the Keyboard tab.
    4. Tick the "Use all F1, F2, etc. keys as standard function keys" box.
    That's it. You have now reversed the default use of the function keys. If you need to increase/decrease sound, brightness etc then press 'fn' plus the appropriate function key.
    Kryten

  • Function keys not functioning.....

    After I installed OS X Lion on my MacBook Pro the function keys at the top of my keyboard no longer function normally. Most of them do nothing when pressed except the volume keys, the volume down switches to spaces and the volume up key brings up the dashboard. The other keys have no action. The workaround that I have found so far is to actually press the fn key while executing the commands. I do not know if there is a setting in the system preferences or what but this is getting to be very annoying. Anyone else having this problem? If so does anyone know how to fix this?

    I am having the same issues with some of my F keys. Just purchased my first MAC (long time Windower ;-), so I'm still finding my way around. I have Lion, and was thinking, are some of the F keys not functioning because Lion does that funtion a different way?  I will post it here if I find your answer.
    Good luck

  • Recovering lost deleted data from compact flash card

    Hi Any help here would be greatly appreciated...
    I filmed some footage onto a compact flash card(sony fx_1 onto a sony memory recording unit/transcend flash card)...all appeared to be working fine untill i got home and the card wouldnt be read..I took it into a shop for data recovery and he managed to return, what we think are the files...
    But so far cannot open these files, they are Unix Executable File, does anyone know how to open these files?
    Or has anyone had a similar experience or success at recovering media files...they were recorded as HDV format...
    Cheers for any suggestions (client is most unamused at the moment)
    Simon

    Make sure they have the correct file type extension on the file name. (eg if quicktime, they would be .mov)
    x

  • X1 Carbon 2014 Function keys not working in windows7

    Hello.
    I have a brand new X1 carbon(model: 20A7-005KMD) that was installed with our company image, running windows 7.
    Alle drivers in device manager has been installed, and system update is updated.
    The carbon has the "touch" function keys and they only partly work.
     When booting the computer i can swap between the different functions, but when i get into windows, its is "stuck" with only the options F1-F12. The F keys work, but i cant change settings by pressing the FN key on the left side og the touch display, and get sounds/brightness settings etc.
    as said, this works just fine during the boot.
    Any ideas what can be causing this and even more important - a fix?

    Hi Guys,
    We are currently having the same issue on the X1 Carbon 20A7 models (20A7000LAU). In BIOS or during boot the function changing works without issue (limited to two (2) function screens how-ever), it stops working once you log in. If you then lock the computer you can change the functions, but then once you unlock the device, it stops working.
    When the drivers are installed and the device is restart we get the above behaviour, if we uninstall the drivers the function keys will function as expected till the device is restarted. This is very strange behaviour.
    On a device received by Lenovo there are 4 function changes/screens in total, we can only make two work temporarily as listed above. We have tried the following.
    1. MDT 2013 Delivered Windows 8.1 x64 image image. All drivers/software components installed from the lenovo website. We receive above issue and cannot resolve by uninstall/reinstalling.
    2. Vanilla Windows 8.1 ENT x64 image installed from Microsoft Volume Licensing portal, installed all drivers supplied from the Lenovo Website. The same behaviour is seen as above and is reproducable.
    3. We have als compared all drivers/software installed on the factory supplied model to a manually built device, still the above behaviour is witnessed.
    4. We have manually exported drivers from the X1 Carbon device from lenovo and injected them into the vanilla Windows 8.1 ENT or PRO newly imaged device, still the same behaviour above.
    Please let me know what I'm missing, I'm certain this is a bug in the drivers for this model.
    Regards,
    Nic

  • NB305 - FN key no longer working with Flash Cards

    I acquired my NB305 last week, and the FN key was working such that when you held it down the Flash Card appeared at the top of my screen.   However, that association has since ceased.   The FN does work for other purposes, and I turned on the feature with the Flash Cards to allow the mouse cursor to activate them.   so both the key itself and the Flash Cards are working, but not together.
    I have searched high and low and I can find no way to reassociate the key and the Flash Cards.   This forum is my last hope for solving this riddle.  I did search the board, but I could find no reference to this problem.
    Any assistance you may be able to provide is very much appreciated,
    -Neil

    start menu> all programs> toshiba> utitilies>settings for flash cards. when the window comes up check the box for allow the mouse to bring up the cards. also make sure the box next to keep the cards on top of other windows so they alway show up where you can see them if you have other programs open. when you have problems bringing them up with the FN key try the same thing as before but instead of settings for flash cards select reset flash cards
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

    Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

    Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

  • F3 function key not work in this ALV pgm

    Hi,
    How to make the F3 function key (go back to previous screen) work in this ALV program?
    Thanks,
    Helen
    REPORT  z_pgm.
    TYPE-POOLS : slis.
    INITIALIZATION.
      PERFORM sub_fieldcat_init CHANGING gi_fieldcat.
      PERFORM sub_eventtab_build USING gi_events[].
      PERFORM sub_event_exit_build CHANGING gi_event_exit.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
        EXPORTING
          i_save     = g_save
        CHANGING
          cs_variant = g_xvariant
        EXCEPTIONS
          not_found  = 2.
    *EVENT : AT SELECTION-SCREEN OUTPUT                                    *
    AT SELECTION-SCREEN OUTPUT.
               EVENT : START-OF-SELECTION
    START-OF-SELECTION.
      PERFORM sub_comment_build  USING gi_list_top_of_page.
      PERFORM sub_get_data.
               EVENT : END-OF-SELECTION
    END-OF-SELECTION.
      IF l_error IS INITIAL.
        PERFORM sub_grid_display USING gi_adrc_disp.
      ENDIF.
    *&      Form  sub_fieldcat_init
    FORM sub_fieldcat_init CHANGING li_fieldcat LIKE gi_fieldcat[]."#EC *
      DATA : lw_fieldcat TYPE slis_fieldcat_alv.
      REFRESH gi_fieldcat[].
      CLEAR lw_fieldcat.
      lw_fieldcat-fieldname = 'SELKZ'.
      lw_fieldcat-tabname   = 'gi_adrc_disp'.
      lw_fieldcat-hotspot   = 'X'.
      lw_fieldcat-outputlen = '8'.
      APPEND lw_fieldcat TO li_fieldcat.
      CLEAR lw_fieldcat.
      lw_fieldcat-fieldname = 'LOCATION'.
      lw_fieldcat-tabname   = 'gi_adrc_disp'.
      lw_fieldcat-seltext_s = text-002.
      lw_fieldcat-seltext_m = text-002.
      lw_fieldcat-seltext_l = text-002.
      lw_fieldcat-outputlen = '20'.
      APPEND lw_fieldcat TO li_fieldcat.
    ENDFORM.                    " sub_fieldcat_init
    *&      Form  SUB_EVENTTAB_BUILD
    FORM sub_eventtab_build  USING    li_events TYPE slis_t_event.
      DATA: lw_event TYPE slis_alv_event.
    *to call top_of_page event
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type = 0
        IMPORTING
          et_events   = li_events.
      READ TABLE li_events WITH KEY name =  slis_ev_top_of_page
                               INTO lw_event.
      IF sy-subrc = 0.
        MOVE c_formname_top_of_page TO lw_event-form.
        APPEND lw_event TO li_events.
      ENDIF.
    ENDFORM.                    " SUB_EVENTTAB_BUILD
          FORM SUB_COMMENT_BUILD                                        *
    FORM sub_comment_build USING li_lt_top_of_page TYPE slis_t_listheader.
      DATA: lw_line TYPE slis_listheader.
    Listenüberschrift: Typ H
      CLEAR lw_line.
      lw_line-typ  = 'H'.
      lw_line-info = text-013.
      APPEND lw_line TO li_lt_top_of_page.
    Kopfinfo: Typ S
      CLEAR lw_line.
      lw_line-typ  = 'S'.
      lw_line-key  = text-014.
      lw_line-info = text-015.
      APPEND lw_line TO li_lt_top_of_page.
    ENDFORM.                    "SUB_COMMENT_BUILD
    *&      Form  sub_VARIANT_INIT
    FORM sub_variant_init .
      CLEAR g_variant.
      g_variant-report = g_repid.
    ENDFORM.                    " sub_VARIANT_INIT
    *&      Form  SUB_F4_FOR_VARIANT
          To get the existing variant
    FORM sub_f4_for_variant .
      g_variant-report = g_repid.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
             EXPORTING
                  is_variant          = g_variant
                  i_save              = g_save
                it_default_fieldcat =
             IMPORTING
                  e_exit              = g_exit
                  es_variant          = g_xvariant
             EXCEPTIONS
                  not_found = 2.
      IF sy-subrc = 2.
        MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
      ENDIF.
    ENDFORM.                    " SUB_F4_FOR_VARIANT
          FORM TOP_OF_PAGE
    FORM top_of_page.                                           "#EC CALLED
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = gi_list_top_of_page.
    ENDFORM.                    "TOP_OF_PAGE
    FORM sub_grid_display USING li_final_disp LIKE gi_final_disp.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'                  "#EC *
          EXPORTING
            i_callback_pf_status_set = 'SET_PF_STATUS'
            i_callback_program       = g_repid
            i_callback_user_command  = 'SUB_CB_USER_COMMAND'
          i_grid_title       = l_title
            it_fieldcat              = gi_fieldcat
           is_layout          = gw_layout
            i_save                   = g_save
            is_variant               = g_variant
            it_events                = gi_events[]
            it_event_exit            = gi_event_exit[]
          IMPORTING
            e_exit_caused_by_caller  = g_exit_caused_by_caller
            es_exit_caused_by_user   = gs_exit_caused_by_user
          TABLES
            t_outtab                 = gi_adrc_disp
          EXCEPTIONS
            program_error            = 1
            OTHERS                   = 2.
    ENDFORM.                    " sub_grid_display
    *&      Form                                          *
    FORM sub_get_data .
      CLEAR l_error.
      IF NOT rb_loc IS INITIAL.
        IF p_loc EQ space.
          MESSAGE i100(zm01) WITH
                  'Please Enter Location Code and SET ID'.
          l_error = 'X'.
        ENDIF.
        SELECT addrnumber location name1 name2 building floor
                   name_co country street str_suppl1 str_suppl3 city1
                   city2 region post_code1 transpzone
                INTO TABLE gi_adrc_disp
                FROM adrc
                WHERE region = p_region
                  AND str_suppl3 = p_loc.
      ELSEIF NOT rb_all IS INITIAL.
        SELECT addrnumber location name1 name2 building floor
                   name_co country street str_suppl1 str_suppl3 city1
                   city2 region post_code1 transpzone
                INTO TABLE gi_adrc_disp
                FROM adrc
                WHERE transpzone NE space.
      ENDIF.
      IF sy-subrc NE 0.
        l_error = 'X'.
        MESSAGE i100(zm01) WITH
                  'No Record Exists for Input'.
        EXIT.
      ENDIF.
      lw_adrc-selkz = c_add.
      MODIFY gi_adrc_disp FROM lw_adrc TRANSPORTING selkz
            WHERE transpzone = space.
      lw_adrc-selkz = c_remove.
      MODIFY gi_adrc_disp FROM lw_adrc TRANSPORTING selkz
            WHERE transpzone NE space.
    ENDFORM.                    " sub_get_data
    *&      Form  sub_cb_user_command
    FORM sub_cb_user_command  USING r_ucomm LIKE sy-ucomm                               rs_selfield TYPE slis_selfield.
       l_index = rs_selfield-tabindex.
      ENDFORM.                        "sub_cb_user_command
    *&      Form  sub_cb_user_command
    FORM set_pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'MAIN'.
    ENDFORM.                        "set_pf_status

    Hi,
    this is for setting the PF-status.
    FORM set_pf_status USING rt_extab TYPE slis_t_extab.
    SET PF-STATUS 'MAIN'.
    ENDFORM. "set_pf_status
    and double click on main and see what is the Function key and function code associated for BACK.
    FORM sub_cb_user_command USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.
    case r_ucomm.
    when <b>'BACK'.</b>  <<<<i assumed Focde is BACK for BACK
    leave to screen 0.
    endform.
    Regards
    vijay

  • Re: I've lost Flash Card Function Keys

    Ive lost the flash cards that used to drop down at the top of the screen. Tried a few different things including updating the drivers from the website.
    At the minute, some of the function keys will work ok, ie brightness,lock - but the energy saving key and the wireless key no longer work.

    Hi Mafustokes,
    Which drivers you have updated exactly?
    The Flash Cards will be controlled from Value Added Package and you should update this tool. Dont know what notebook you have but you can get it here for example:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

  • Remapping special function keys

    Hello,
    I have a new Penryn MacBook Pro and I like the new special function keys for Expose, Dashboard, and audio controls. However, I use the Expose "Application Windows" command far more often than the Expose "All Windows" command, which is mapped to the F3 key here. Does anyone know how I can map the F3 special function to "Application Windows" instead?
    I have the "Use all F1, F2, etc. keys as standard function keys" preference disabled because I rarely use the true function keys and would like to continue using the special functions with a single keypress. Also, I know I can map the All Windows command to fn-F3, but I'd rather just press F3 if possible.
    I'd prefer to do this without installing a third party extension, but I'm not opposed to editing a config file from the command line if necessary.
    Thanks in advance.
    -Arlo

    Well, I haven't figured out a way to do this. I looked into DoubleCommand, but based on the screen shots I don't think it can do it (or change my right-option key back to an Enter key, which I would also like to do). And the release notes mention a lot of kernel panics, so I didn't want to deal with that. I also looked at Ukelele (sic), but its user manual explicitly states that it can't change to special function keys (and also isn't fully supported under Leopard).
    What I ended up doing is changing the keyboard shortcut for Expose - Application Windows to fn-F3, and Expose - Desktop to fn-F4. So now I can access the three Expose commands and Dashboard with the F3 and F4 keys, with and without the fn. That lets me access those commands with one hand, and frees up my F8-F12 keys for the occasional Word or Flash keyboard shortcut.

  • Lost Function Key Visualization

    I have Lenovo G550 - 2958H2Q
    My Function key Visualization are not working.
    I turned off my inbuilt bluetooth device by Fn+F5 now now this function is not showing that Visualization.
    So, Please halp me to turn on my blutooth device
    UtPaL

    Hello Richard
    When you press FN button the Flash Cards should be shown at the top of the display. If nothing happens you can try to restart Flash Cards. This option you can find under START > All Programs > TOSHIBA > Utilities > Restart Flash Cards.
    Please try it. If this will not helps please restart your notebook. Be so nice and post the result.

  • Lost all visual indicators, function keys, etc. on T500 (Type 2082)

    I think CCleaner is the culprit as soon after running that, I lost all my onscreen indicators (volume, brightness, battery meter in the system tray, etc.) as well as functionality - volume up and down work, but mute does not.  Blue Thinkvantage button doesn't work.  Also, none of the Function keys now work.  I re-installed software - the HotKey manager, the ThinkVantage toolbox and have done all updates, but still the T500 refuses to cooperate.  I'm running Win7 32bit.  If anyone has some advice to get things running correctly again, it'd be most appreciated.
    thanks,
    Dan
    Solved!
    Go to Solution.

    Well making some progress.  Once I tracked down the HotKey Client Loader dependencies (ThinkPad PM Service, which was also disabled), got it to start.  So now, the mute button and volume indicator are working.  The ThinkVantage button now works (though I'm not sure why I really care that much, since that bloatware takes forever to load). 
    The function keys are working, but still no visual indicator for brightness and the Power Manager Gauge icon in the SysTray is still not showing.
    Any more clues?
    thanks

  • Using Function Keys and Alt Key in Flash Video

    I am attempting to create an eLearning video, which includes instructions, a "try it yourself" section, and then a quiz.  Our software that I am trying to simulate uses Function keys (F6 to bring up specific windows) as well as shortcut keys (Alt-S takes the user to a certain field, Alt-P conducts a Patient Search, etc).  However, I have found that when running the video using IE, the browser takes over the focus and these function keys do not control the video. 
    These functions work fine in Google Chrome (not approved for use by the company) and when the video is published as .exe, but I need this to work in IE. 
    Is there anyway to retain the focus on the flash video for the entire video?
    Thanks so much for any help!

    Here is the Preference dialog that Lilybiri was referring to where you can change the key assignments.
    When finished recording, you can click the Restore Defaults button to set everything back the way it was.

  • Satellite U840W/001 W8 Fn+Z not working in Special Function Key Mode

    Hi,
    I realised that the Fn+Z does not work when my Special Functions Key mode is on i.e: when I can control the volume by just pressing F9 without pressing the Fn button.
    However, when the Special Function Keys Mode is off (& I have to press Fn with the F# buttons to control the volume), only then does the Fn+Z switch the keyboard backlight on & off.
    When I open my function key program, the only option available is to either switch the notification settings on/off. There's no timer control or anything useful on it.
    My BIOS does not have any keyboard backlight setting, only the option to use the normal Fn+F# or to use the special function key mode.
    Please help me.
    Thanks

    >I realised that the Fn+Z does not work when my Special Functions Key mode is on i.e: when I can control the volume by just pressing F9 without pressing the Fn button.
    Hmm in my case using Windows 7, the Fn + Z works even if the Special Functions Key mode is enabled. But I cannot say for sure how it works running Win 8
    On Satellite U940 with Win 8, the Fn + Z works properly too (Special Functions Key mode ON)

  • Satellite L850 - Special function key not working properly

    Hi Everyone,
    I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
    Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
    But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
    When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
    Please advise. Thks a lot!

    Take a look here:
    Function key changes in Satellite and Qosmio 800 series
    http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
    You can use the traditional FN + F key mode or just an F key mode.
    This can be enabled and disabled in BIOS or the HWSetup
    In BIOS go to Advanced -> System configuration -> Function key mode
    This mode can be changed
    Also be sure that Function Button option is enabled too

Maybe you are looking for

  • Conversion the land1 field

    Hi, I want to convert the land1 values 'us' to 'US'. These values in a internal table so please tell me how to do it. Which function module i can use for this. I already search for conver routine but there is no conversio routine for the field land1

  • Is Adobe CS4 compatable with Lion?

    Before I install Lion, I would like to find out what software is compatable, especially CS4 (photoshop illustrator InDesign, etc)

  • How to unlock Iphone4?? PlEASE READ

    Hey guys I have bought an Iphone4 from new zealand. All the phones brought from New Zealand are UNLOCKED. But then I had to get my phone replaced (from apple Australia) because my home button was not working well. It was all good till here, because i

  • Camera profiles in LR (dng or native camera raw?)

    I made some profiles for my Canon 5d and 5dMkII using the Adobe DNG Profile Editor and I now have them in the calibration panel in LR4. Is there any difference between using a .dng file or a .cr2 (Canon Raw) file with these profiles? They both seem t

  • Error when try updating software in Setting

    When I use Software Update in Setting - General with my iPhone 4S, it prompted me "An error has occured while checking for a software update"