Lost Home Page after upgrade.

Vista Home Edition OS
Firefox has been my default browser for years.
I have recently tried to disable Yahoo tool bar and in the process somehow lost my Firefox Home Page and the ability to log on to my page.
After previous Mozilla upgrades, I could sign in to my account and be at my home page.
Now I get the Google search, the Firefox challenge and restore Previous session, but link to sign-in.
The Yahoo Took Bar is still there and previous tech support remedies have failed.
I cannot find any reference to the Yahoo Tool Bar in the add-ons.

I have a similar problem, and have investigated possible solutions I could find, and nothing worked.  Here is the situation:
--Event: Upgrading my wife's iPhone 4 from iOS 4.x to 5.1
--Problem: All contacts were lost.  Nothing in SIM card, Texts, Searchlight, etc.  Phone numbers were retained (e.g., in favorites)
Details...
--I did back up the phone before upgrading, but can only find later backups to restore from (i.e., backups made after the upgrade).  I tried a restore, but nothing meaningful changed.  I cannot figure out how to go back the backup before the upgrade.  (I don't have Time Machine, somehting suggested in another post.)
--There is no Outlook or other application synchronized from which to recover contacts
--We both sign into the same Apple account
--I did NOT turn on any kind of iCloud sync (which I think would have synced my contacts with my wife's phone).  All iCloud services are turned off, though the upgrade did set up an iCloud account, which I have since deleted (just in case).
Does anyone have any suggestions?

Similar Messages

  • Cannot View Database Home Page After Upgrading to XE 3.2 on Windows XP

    Hi all,
    I have recently upgraded from APEX 3.1 to APEX 3.2 on my Oracle 10g XE database running on Windows XP SP3.
    Unfortunately after successfully completing the upgrade and starting the services when I try and visit the Start -> All Programs -> Oracle Database 10g Express Edition -> Go To Oracle Database Home Page I am receiving a page cannot be found error (or broken link message, depending on the browser I try IE7, Firefox 3.0.10 or Chrome 2.0).
    The link I am being directed to is:
    http://127.0.0.1:8080/apex (I have an entry in my Hosts file referring this to localhost).
    How can I tell if Port 8080 is still open and accessible? I am using the embedded web pl/sql gateway and tried reconfiguring it again by running apxconf.sql as SYS:
    SQL> @apxconf.sql
    PORT
    8080
    Enter values below for the XDB HTTP listener port and the password for the Application Express ADMIN user.
    Default values are in brackets [ ].
    Press Enter to accept the default value.
    Enter a password for the ADMIN user []
    Enter a port for the XDB HTTP listener [      8080] +<simply returned default>+
    ...changing HTTP Port
    PL/SQL procedure successfully completed.
    PL/SQL procedure successfully completed.
    Session altered.
    ...changing password for ADMIN
    PL/SQL procedure successfully completed.
    Commit complete.
    -------- Confirming that the services have started ---------------
    C:\oracle\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
    The OracleXETNSListener service was started successfully.
    C:\oracle\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
    The OracleServiceXE service is starting......
    The OracleServiceXE service was started successfully.
    C:\oracle\oraclexe\app\oracle\product\10.2.0\server\BIN>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-JUN-2009 23:16:51
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 16-JUN-2009 23:16:27
    Uptime 0 days 0 hr. 0 min. 24 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File C:\oracle\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\listener.ora
    Listener Log File C:\oracle\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    Listener Log File (C:\oracle\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log)
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-JUN-2009 23:16:27
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    System parameter file is C:\oracle\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\listener.ora
    Log messages written to C:\oracle\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
    Trace information written to C:\oracle\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
    Trace level is currently 0
    Started with pid=600
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
    Listener completed notification to CRS on start
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    16-JUN-2009 23:16:51 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Gary Williams))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
    ------------ Other tests -------------
    SQL> SELECT STATUS FROM DBA_REGISTRY WHERE COMP_ID = 'APEX';
    STATUS
    VALID
    C:\temp\apex>find /I "ora-" *.log
    ---------- INSTALL2009-06-16_13-02-41.LOG
    ---------- SQLNET.LOG
    SQL> SELECT username
    2 FROM dba_users
    3 WHERE username LIKE 'FLOWS_%'
    4 OR username LIKE 'APEX_%';
    USERNAME
    FLOWS_030100
    APEX_PUBLIC_USER
    APEX_030200
    FLOWS_FILES
    FLOWS_020100
    I have turned off my Firewall, checked against multiple browsers.... HELP!!!!
    I've backed out the 3.2 upgrade and reinstalled and receieved the same issue. The next step is to unistall the XE database and reinstall, but I'm loathed to do that without seeking some responses from this Forum.
    Many thanks.
    Have a great day.
    Kind Regards,
    Gary.

    Hello Roel,
    Thank you taking the time to reply.
    I had previously tried all those url combinations and still no luck.
    I also found out about displaying the HTTP port number. And you were right it was listening on the default 8080. I disabled it and re-enabled it on port 9080 to see if that made a difference but it didn't so I decided to remoce Oracle XE database and go through the reinstallation and subsequent upgarde to APEX 3.2. Everything appera sto be working fime now.
    One point of note is that if I view the Listener status now I notice another line from what I had previously referring to the HTTP listener, although my listener.ora file never changed (apart from having the TNS Listener port resuming to the default 1521).
    C:\>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-JUN-2009 11:24:30
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    Start Date 18-JUN-2009 09:08:04
    Uptime 0 days 2 hr. 16 min. 29 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File C:\oracle\oraxe\app\oracle\product\10.2.0\server\network\admin\listener.ora
    Listener Log File C:\oracle\oraxe\app\oracle\product\10.2.0\server\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=D9GVDX1S)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "XEXDB" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Service "XE_XPT" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Service "xe" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Can anyone answer why this may have been omitted previously? Presumably this is why my browser couldn't render anything from APEX.
    Kind Regards,
    Gary.

  • Lost you tube from home screen after upgrading to os6?

    I've lost you tube from home screen after upgrading iPad software. Is this normal?

    Sorry, no YouTube in IOS 6.
    You can use the iPhone version of YouTube or Jasmine
    http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
    https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

  • HT4623 Can not get pass Term and Conditions page after upgrade?

    Can not get pass the Terms and Conditions page after upgrade?

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

    Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can't open Pages after upgrading to snow leopard on 10.6.8

    Can't open Pages after upgrading to snow leopard on 10.6.8

    Has Spotlight finished its indexing?  Check in the upper right.  If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

  • I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

    I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
    Failed to verify the preflight file. It is not signed by Apple.
    How to I get past this?  I cannot find anything referencing preflight file.  Who can identify this?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL. Log out, log back in, and test.

  • How do i get a new tab to open up with my home page after i click on the + at the end of the tab

    how do i get a new tab to open up with my home page after i click on the + at the end of the tab

    problem solved thak you Andy.c that was too easy and a fast reply i'm abit of an iliterate with these things

  • Unable to  get the login page after upgrade from 11.5.10.2 to R12

    Hi ,
    We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
    Pls let me know if someone has come across this issue.
    Thanks&Regards,
    Apps DBA

    Hi ,
    After compile JSP files manually , now we are facing problem after logging.
    Error : You have encountered an unexpected error.
    Thanks&Regards,
    Apps DBA

  • How can I get my mac to return to my home page after closing, now it returns to last page viewed.

    Can anyone tell me how to get my desk top IMac to return to my home page after leaving the internet?  Now it returns to the last page viewed,
    I hate that!

    Depends what OS X and Browser you are using?
    If you are on Snow Leopard (10.6) and Safari (5.1.7) then open Safari Preferences, select the General tab and make sure that:
    1. Safari opens with: A new window
    2 New windows open with: Homepage
    3. Homepage: is set to the desired https: site

  • I lost my contacts after upgrading to IOS6 on iPhone 4

    I lost my contacts after upgrading to IOS6 on iPhone 4

    At the most inconveient time possible(vaca) after downloading ICloud, All my phone contacts disappeared :( Wishing I knew how to uninstall to the way my phone was before.I leave in 4days.

  • Has anybody lost imported photos after upgrading to Lion? (iphoto11)

    Has anybody lost imported photos after upgrading to Lion? (iphoto11)

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • XE database home page link goes to APEX home page after 3.2 upgrade

    Hi - I had Oracle XE running on Win XP all OK.
    Taking the Database home page link took me to http://127.0.0.1:8080/apex/f?p=4550: etc etc BUT it took me to the XE login page which we use for system administration - all good so far.
    I then upgraded (sucessfully) the installed APEX (V2.1) which comes with XE to the new V3.2 version.
    All went well BUT the url above takes me to APEX login page and I can't get to XE adminstration.
    Any ideas or clues how I should upgrade to keep both login pages available ?
    Regards Dave Lee

    davejlee wrote:
    All went well BUT the url above takes me to APEX login page and I can't get to XE adminstration.
    I'm not sure what you mean with this?
    In APEX Upgrade guide are listed 'Database Management Differences between Oracle APEX 2.1 and 3.2'
    http://www.oracle.com/technology/products/database/application_express/html/3.2_and_xe.html

  • Photos don't display on book pages after upgrading to 9.4.2

    I have several books I created in version 9.4.1. After upgrading to iPhoto 9.4.2, most of the pictures will not display on the book pages. Only 1 photo displays out of 3 or 4 photos on the page. Is there a setting that has changed? Using Mountain Lion 10.8.2 on MacBookPro10,1

    Did you duplicate the existing book or create a new empty book and add the same photos?
    Have you tried rebuilding your library as follows: make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Mass storage issues (does not play in car on home stereo) after upgrading to V4.5

    I am having issues with Mass Storage after upgrading my 8130 to V4.5.  I can no longe hook the device to my home stereo or car stereo to play music. My computer does read the device.  It is not my media card.  I still have my old blackberry: the card shows up on both phones and computers.  It is not my cables as they work with my old phone.  I have also done all the obvious things like pull the battery and play with the media card setting
    This guy had the same issue though i never saw resolution:
    Any idea is appreciated! After upgrading the device software to version 4.5 earlier this week (BlackBerry 8800 with v4.5.0.69 (platform 2.7.0.72)) as proposed by T-Mobile and RIM Germany something has changed with the behaviour when connecting via USB as a mass storage device:
    Using a micro-SD card with 2 GB for some months now as a storage for MP3-Files which can be played with my Blue&Me system in my car. This is some kind of Microsoft Windows mobile platform (Automotive) providing playback of MP3-files etc connected via USB. This was never a problem with the previous software. It behaved as it should. Here is an example of what it previously did (taken from http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...):
    "On your Blackberry device, you may or may not first see a message about insufficient current. It just means you can't charge your Blackberry with that PC USB port. Hit the escape key once (on your Blackberry device). You will be prompted a question : do you want to activate USB Mass Storage Mode. You can answer YES or NO. Answer YES."
    The message about insufficient current is important here because the Blue&Me system does not provide the current as proposed by USB-standards. Anyway after clicking this message/warning away the Blue&Me would recognize the mass storage and start playback.
    After upgrading to v4.5 there is no warning about current any more and the mass storage can't be recognized. I've checked both components: The B&M works fine with any other USB-devices connected, and the BB works fine with Windows after connecting via USB (presumably because there is enough current!). All standard settings in Options/Media card for enabling mass storage have been tested but without success.
    Hopefully someone whose genius far exceeds mine will help me with this.  Thank You.

    I have exactly the same issue with my car stereo equiped with USB and my 8130 device. OS 4.3 works fine (and displays the "insuficcient current" message) and after upgrading to 4.5 mass storage mode not works anymore. And of course it works with regular desktop/notebook computers. I've made many experiments with different storage cards (now I use SDHC 8G from SanDisk). The card works fine if I attach it through card reader in my car, it even see multiple drives which cardreader creates.
    Even more I wrote the small blackberry application in java (i'am professional programmer) and ordered BB keys for $20 to deploy it to device. The program uses the RIM api call Device.requestStorageMode() which in my opinion should turn on storage mode of device. But the result was the same - car audio don't see the mass storage with OS 4.5.
    Interesting fact that in OS 4.3 the message about "insufficient current" appears BUT the device CHARGES via this USB without a problem. The same case with OS 4.5 - charging device is possible.
    Also, I can't switch to OS 4.3 because it have the serious problem with bluethooth connections - it suddenly lost my handsfree link and its very bad if I get incomming call during driving and my handsfree not work.
    Forgot to mention - now I have the OS 4.5.0.127
    Michael.
    Message Edited by djm132 on 04-09-2009 01:01 PM

Maybe you are looking for