Lost input or output device for sound

In system preferance went to hardware clicked on sound to choose input and or output device  and when booting Garage band error core device misiing..?

It it may be that you are running either an outdated BT software or the firmware of the card is not up to date.
What version is your BT software? Is it later than 1.5?
http://support.apple.com/kb/DL1209
Firmware:
http://support.apple.com/kb/DL354
Along with the firmware, it is likely that the headphones require a later BT revision than you are running. The headphones need rev.2.
You may need to move to Leopard for support.
http://support.apple.com/kb/DL889
It also may be that headphone support is limited to iChat or the like in Tiger.....
If you go to a USB BT dongle, D-Link often gets the nod as having native compatibility in OS X.

Similar Messages

  • Automatically choose an output device for itunes?

    I have several audio input and output devices, for example, a speaker phone for skype, speakers with sub woofer for itunes. Is there a way to make an Output device automatically be choose for a specific app such as itunes? I would never want to listen to itunes over the speaker phone nor skype with the speakers/subwoofer.
    I find my self often changing the output device with the ALT speaker icon in the upper right, but this doesn't always end well if you have already started the audio out of the wrong output device.
    Any ideas?
    thanks
    bob

    hello, friend.
    has the BASIS consultant made any settings for the printer? 
    regards.

  • How can I get my audio input and output devices back? I have no sound and cannot see any of the devices in Audio MIDI Setup..??

    Hi, I tried to set up a new output audio device on my mac that would have multiple outputs (iBox Twist speaker and my internal speaker) but when I went to click onto one of the iBox Twist (there were 2 options available: iBox Twist and iBox Twist Stereo), Audio MIDI Setup crashed and when I finally got that back open, I found that there were no audio input or output devices to be found. My sound is working, as when I turn on my iMac, the starting sound still plays, however the volume control in the menu bar is no longer a black colour, but grey and when I try to change the sound on my keyboard it does not change. This already happened to me once, and after 3 hours I managed to fix it very simply (switching off Mac, unplugging power cord, leaving for 15 seconds, plug power cord back in and switch Mac back on, holding Alt, Cmd, P and R keys until you hear the Starting Up sound twice) however this same technique that fixed it once before is not working this time and I am still stuck without sound. I have tried Repair Permissions, rebooting in Safe Mode, Hardware Test and checking for Software Updates. Has anyone else had this problem and managed to fix it?
    Thanks in advance for any help anyone can give me!

    In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
    Switch off Mac
    Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
    Switch off Mac again
    Remove power cord and wait 15 seconds
    Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

  • I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. 
    There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match.  How do I correct this?

    I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match.  How do I fix this?

    I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.          

  • I use a 2003 FW800 MDD desktop, with dual 1.25 GHz processors, and OS10.4.11, and with native Bluetooth card, won't recognize a newer Bluetooth Headphone set as an Input or Output device in System Preferences

    I use a Mac 2003 FW800 MDD desktop with dual 1.25 GHz processors, 2 GB memory, and a native Bluetooth card installed. I use OS10.4.11.  The FW800 was the only MDD that could use Bluetooth natively, as an optional installation.  I use the installed Bluetooth to run an Apple Aluminum Keyboard, and would like to use it with a new (2010) Samsung SBH-600 Bluetooth Headphone set, but, although the set will pair with the computer, and is recognized in both the System Profiler, and the Bluetooth section of System Preferences, it is not recognized in the Sound preferences section of System Preferences as either an Input or Output device.  Only the installed external Apple speakers are recognized.  I'd like to know if there is anything that can be done to make the Bluetooth system installed work with these headphones - either something that can be changed in the computer settings, or an added external Bluetooth device with different Bluetooth capabilities.

    It it may be that you are running either an outdated BT software or the firmware of the card is not up to date.
    What version is your BT software? Is it later than 1.5?
    http://support.apple.com/kb/DL1209
    Firmware:
    http://support.apple.com/kb/DL354
    Along with the firmware, it is likely that the headphones require a later BT revision than you are running. The headphones need rev.2.
    You may need to move to Leopard for support.
    http://support.apple.com/kb/DL889
    It also may be that headphone support is limited to iChat or the like in Tiger.....
    If you go to a USB BT dongle, D-Link often gets the nod as having native compatibility in OS X.

  • VB6 Using MCI Commands to Select MIDI Output Device for Playback in Windows 8.1

    I have written a MIDI Player program in VB6 that uses the multimedia control.  In Windows 8.1, I understand that midimapper is no longer available so the third party softwares which can set the output devices for MIDI do not work as they did for
    Vista and Windows 7.  I found this Microsoft example code that selects sound cards using MCI code and was able to modify the code to show me the MIDI output devices.  In particular I need to output to a USB to MIDI cable.  Can this code be modified
    to do just the PLAY function for midi out to the USB to MIDI cable?  I do not need the record side of the program.  Here is the MS article number since I can not post the link to the the VB6 program:  q182799
    With a modified code to play midi, I can then pull the necessary code into my MIDI Player Program.  Thank you for the help on this.

    Hi,
    For Visual Basic 6 questions, read the post at the following address
    http://social.msdn.microsoft.com/Forums/en-US/vbgeneral/thread/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.  Thank you for your understanding.
    Kate Li
    TechNet Community Support

  • Selecting separate input and output devices!

    hi, i have logic pro 8 and cant find out how to select separate devises for input and output!
    for my output (and input when recording drums) i use a alesis multimix 16 (16 track firewire desc) but for recording guitars and bass and poss vocals i would like to use my line 6 x3 live as my input devise but still using the alesis for monitoring.
    is this possible? cant figure how to do it.
    any help is great help! cheers, Dan

    In Logic 9 you can easily select different input and output devices in the Preferences Devices area. In Logic 8 you must create an aggregate device -
    http://support.apple.com/kb/HT1215
    JG

  • Output device for MB51 List

    Hello Experts!
    Does anybody know how can I find to which output device a user sends the list he gets from MB51?
    Regards,
    Ileana

    Hi,
    The user says the documents are not printed there, and once the user clicks 'print', everything is printed automatocally, she doesn't do any input... Is theresomething like an output device for program / for user????
    Regards,
    Ileana

  • The best output device for iPod?

    Hallo Everybody,
    Somedays ago I have seen an heard the T+A Caruso(http://www.taelektroakustik.de/deu/ta2/caruso/caruso.htm). This was it! Yes! Internetradio, CD and iPod in a perfect Combination of Sound! - and then the cold shower - 1700 Euro not $!
    Who know a ultimative solution under this price?
    DENON S52 is it not! no sound calibration!

    You can connect an iPod to any sound system. So the best "output device for iPod" is the same as the +best output device, period.+
    I'm told you get better sound (for the purpose of feeding into a sound system) if you connect the audio output through the docking connector, instead of from the headphone jack. You get +line level audio out+ like with other audio system components.
    You can do so if you have a Docking Station device with a stereo jack, or if you get a cable like this one.
    [Example of cable with docking connector and mini-stereo jack|http://www.restockit.com/Cables-To-Go-IPod-Audio-Cable-Apple-Dock-Connecto r-Mini-phone-Stereo-3-5-Mm-M-White-(73679B).html?source=froogle&Bvar5=100F1&Bvar 6=100F1&Bvar7=100F1]

  • Problem in creating output device for RICOH Aficio MP 2000 PCL 5e printer

    HI,
    i have problem in creating a output device for the RICOH Aficio MP 2000 PCL 5e as i am unable make out which device type should be assigned and what should be given in spool server tab.
    i have pinged the printer in lan and it is connecting.
    when i am giving the print from new ricoh printer its going to some other old printer in network.
    we are unable to get the logo of our company when we are taking print from this printer from sap level.
    kindly suggest what other things has to be taken care.
    regards
    anil

    Hi,
    shall i do in development and then import the same to quality and production.
    also tell me what shd i put in these tabs
    version-sapsripthandling-driver
    list handling-printer driver
    printer character set-character set-syt character set
    we can find this tab in create option of device type.
    when i am trying to save its showing it has to be done on program level.
    kindly reply back as it will resolve the big issue for me.
    thanks
    anil

  • Changing audio output device for currently running program

    I'm not sure where to put this question, but all my searching hasn't seemed to find an answer...
    If I have a program running, iTunes, VLC, a game, whatever, and want to change audio output from say Line Out to Headphones, I have to restart the program for the change to take effect. Is this by design/normal or am I missing something somewhere?

    this is actually a quiet significant issue. There is no way in Flash to select the audio output device.
    Today  people have regular speakers and a separate headset. They all use the  speakers for music and the headset for voice. Skype i.e. has the option  to choose audio output device and its really handy, because
    you dont  have to bother to set the default device to the headset everytime you  want to use it.
    If you set the default device to the headset all other apps will send their audio  output to the headset - which is not what you want either.
    So people  really want to leave the default device set to the speakers and not to  the headset.
    Nokia did this for Java
    JRT 2.1 / Nokia UI API updated to version 1.4:
                AudioOutputControl extension for controlling which audio output device, for example the device loudspeaker or earpiece, is used to play back audio
    This really is an issue.

  • How to set a default output device for FAX outputs

    Hi Experts,
    Business requires to set a default output device for fax outputs ( Medium as 2 Fax medium ).
    as fas as print output ( medium as 1 print medium ) is considered we can maintain output device in condition record--> communication
    I tried maintaining output device in VP01 for my condition type based on sales org but it did not worked.
    Can you please suggest ways to achieve default output device for fax outputs.
    Thanks,

    Well, obvious solution would be to either update user profiles or change the output from 'process immediately' to 'process by a background job'. Then create a generic user ID with any fax number desired and use that user ID to process the output through the background job.
    This is not really an SD question, so if this simple option doesn't work for you, I'd suggest to discuss other custom solution with your ABAP / Basis team.

  • Default output device for ALV report

    Dear friends,
    Here there is a user requirement that he want print a particular ALV report in a
    perticular output device. and want to fix that output device for that report instead of changing everytime.
    Kindly suggest.
    Regards,
    Praveen Lobo

    Hi,
    This way system is expected to search for default printer. What I would recommend you to do is call transaction SP01 within the report and pass the initial screen parameter thru FM.
    Hope this lead, help you solve your issue!
    Reetesh

  • Output Devices for Purchasing Groups

    Dear Friends/Gurus
    Please help me out on this issue
    We Configure Output Devices for Purchasing Groups in
    SPRO the path is
    SPRO-IMG-MM-Purchasing-Messages-Assign Output
    Devices for Purchasing Groups. I would like to know what is
    the Exact Usage of this Function.
    If we Assign a Output Device (Printer) to a P Group and
    create a PO using the same P Group, Do we get it any
    where?

    Hi
    Yes, u r right !.
    Once u configure the Printer determination for Pur group. u can take the print at the required location
    anand

Maybe you are looking for