Lost link from iWeb to files

I was using Multisite for iWeb but ended up not needing it. Now that my demo has expired iWeb 08 can't find any files or folders for my website, even though I found them all on iDisk. I copied them to my desktop but since there is not a "domain" file in there, I can't open iWeb using any of those files.
Can I restore all of my work? I looked within iWeb and there wasn't any import funtion.
Steve

I don't use mulit-site, but I suspect it moved you domain file to other than the default location.
Use spotlight to search for "domain"
If it does not show up make sure spotlight is looking at system file also.
If you find it you can locate it where ever you like and double click it to load Iweb.
The default location is your user library/application support/iweb.
You can not import the published file back into iweb.
The following is from the multi-site tech info:
While you don’t need to understand how data is stored to use Multisite for iWeb it can be helpful occasionally to understand what is going on behind the scenes. At a nuts and bolts level Multisite for iWeb stores all of its sites in your home folder’s Documents folder in a single package (which is really a fancy folder dressed up to look like a file) called “Multisite for iWeb Data.mfi.”
Inside the package there is a folder called “sites” and within that is a folder with the name of each site you have managed. In each of those folders is a single “Domain.sites” file that iWeb uses when it’s editing that site. Often a picture is easier to understand. This snapshot is a look inside of a package that holds four separate sites.
Sounds like you need to locate the "package", right click or a control click it and "show package contents". From there you should be able to find your domain file..
good luck
Message was edited by: Chuck Usher

Similar Messages

How can I create a link from a CHM file to a webhelp file?

How can I create a link from a CHM file to a webhelp file?
The CHM output (accreditation.chm) is stored in a parent directory, and the webhelp output (index.htm) is stored in a child directory.

Open the usual Link dialog and enter the relative path from where the CHM will be installed to where the webhelp will be installed.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button

I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button to navigate back to my starting point the bookmarks are replaced by "page thumbnails". Is there anyway to stop this from happening?

Hi Pusman,
While setting up the links, if you choose to open the file in a new window then you won't face this issue, then you can simply switch to the previous file and bookmark view will remain as it is.
Does that helps with your query?
Regards,
Rahul

Pdf-file with clickable links from iweb 09

How can I create a pdf-file with clickable links from a website created in iweb 09?
All iwork apps have an export button, which fulfills this task, but iweb does not.
Any idea?

I am running 10.5.6 on a MacBook Pro 2.53 GHz. I create my PDFs via the print dialogue. I tried to create a PDF from iweb with Hyperlinks activated and all links are dead. I tried to create the PDF from the Safari window, were all links are active, and – funny enough – sometimes all, sometimes half of my links are dead. But most of them do not work. As soon as I create PDFs from third party sites, everything works fine.

Sliding Flash Interface - Using Links from an XML file Problem

Hi All,
Working on a new site for the company i've recently started
working for... fairly new to flash but wanted to try this sliding
interface for the graphic banner at the top of the page...
have a look here at an early version of the site - sliding
graphic interface at the top with coloured rollover buttons (a lot
of work still to do! feel free to post constructive criticism)
(am I allowed to post links??)
here is the unfinished version with no links in the flash bit
http://www.westfieldhealth.com/website/index.asp
The Problem:
I am pulling in a 'heading' 'text' and 'image' into the
sliding graphic interface from the following xml file... (there are
4 different xml files for 4 different slides)
<?xml version="1.0" encoding="iso-8859-1"?>
<content>
<dialogue>
<heading>Interested in selling our health
plans?</heading>
<text>Click here to learn more...</text>
<img>home_window/intSmall.jpg</img>
</dialogue>
</content>
I want to add a link to the xml that would be specific to
each instance of the window...
eg
<link>contact-us/index.asp</link>
But my limited knowledge of flash means I have no idea how to
pull the link through from the xml file to use in the flash...
Perhaps I need link text to pull as well
eg
<link-text>click here to contact us</link-text>
Here is the function that pulls in the img, heading and txt
public function onComplete(event:Event):void {
var loader:URLLoader = event.target as URLLoader;
if (loader != null) {
externalXML = new XML(loader.data);
mover_mc.heading_txt.htmlText =
externalXML.dialogue[0].heading;
mover_mc.myText_txt.htmlText = externalXML.dialogue[0].text;
var url:URLRequest = new
URLRequest(externalXML.dialogue[0].img);
myLoader.load(url);
} else {
trace("loader is not a URLLoader!");
Can anyone help me on how to pull in the link from the xml
and use it to navigate to a different page on the site
Thanks very much
Hans
link to
my unfinished flash file...

What is the exact error you get (what db version also), could you post a simplified version of the SQL which fails also? I have splitter based maps that successfully read from file via the XMLType(bfilename....) style code and insert into multiple targets, I did this on 11g though.
Cheers
David

Any way to find lost data from the xml file?

Is there any way I can retrieve lost metadata from my mp3’s? I have had 9 months worth deleted, the mps’s are still there but I’ve lost playlists and date added info etc. from the xml file. There are old restores from 9 months ago and now, (the iTunes librarys stored in history are from 9 months ago) the library I currently have has 5 songs ive added this week, and everything from over 9 months ago.
thanks,
guy

I have experienced the EXACT same problem... can't find a solution but am searching madly. Please post what you discover, if anything.

How to remove a link from a pdf file

I am reading a pdf file using preview. I is a freely available research article. While marking words to look them up in the dictionary I noticed on two of the 40+ pages, the curser had changed from the "mark text"-symbol to the hand symbol as one would expect when hovering over a link. When I click on the pdf page safari opens up and lead me to the publishers website offering distantly related articles to the one I am reading at the moment. When I open the exact same pdf file in adobe acrobat 11, no such behaviour can be observed. Is there an explanation for that, more importantly can I switch the link of?
many thanks
Chris
Running mountain lion .4, Safari 6.0.5, preview 6.0.1 and Adobe acrobat 11.0.02
file in question: http://www.demographic-research.org/Volumes/Vol22/34/

Archana,
Can you wrap your code in <code> tags (use square brackets rather than angled ones), as the forum software is interpretting the HTML tags, in other words we can't see what you mean ;)
In any case, there are a few different options (guessing at what your problem is, without seeing the actual data), you could use htf.escape_sc or replace, regexp_replace etc to substitute the values before you output them to your PDF.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Contact Form: How do i create a link from an XML file to another domain to read a PHP File

So i purchased a template from Template Monster and im having a little trouble with the contact form. The server that im uploading it to is a privite server that the company owns. It supports ASP and not PHP. I cant seem to get the ASP form to work so all i want to do it create a link to another one of there servers that supports PHP and have the contact form link to there and read the PHP file (that i will upload to that server) and send the email from there.
This is the XML that i have to fill in in order to make it work
Everything in Red is what i needed to fill out in order for the form to work.
<?xml version="1.0" encoding="utf-8"?>

<contactFormConfiguration>
 
 <emailTo>[email protected]</emailTo>
 
 <serverProcessorType>php</serverProcessorType>
 
 <serverProcessorFileName>contact</serverProcessorFileName>
 
 <validateRequiredOnly>false</validateRequiredOnly>
 
 <submitFormOnEnter>false</submitFormOnEnter>
 
 <messageSentText>Thank you for your message.</messageSentText>
 
 <messageSentFailedText>Sorry, your message couldn't be sent</messageSentFailedText>
 
 <formProcessingText>processing...</formProcessingText>
 
 <smtpServer>localhost</smtpServer>
 
 <smtpPort>25</smtpPort>
 
 <plainText>false</plainText>
 
 <emailFromSource>2</emailFromSource>
 
 <subjectSource>Contact Form from your site</subjectSource>
 
 <validationErrorMessages>
 
 <message type="fieldIsRequired">{LABEL} is required.</message>
 
 <message type="emailNotValid">{LABEL} - is not valid email address.</message>
 
 <message type="minCharsLimitError">{LABEL} - The specified number of characters in a field is less than a required minimum.</message>
 
 <message type="reqExpError">{LABEL} - The specified string does not match with the regular expression.</message>
 
 <message type="biggerThanMaxError">{LABEL} - The specified number is greater than an acceptable biggest number for this field.</message>
 
 <message type="lowerThanMinError">{LABEL} - The specified number is lower than an acceptable lowest number for this field.</message>
 
 <message type="notANumberError">{LABEL} - The data is not a number.</message>
 
 <message type="negativeError">{LABEL} - The specified number must not be negative.</message>
 
 <message type="minRequirementError">{LABEL} - The minimum number of variants is not selected</message>
 
 <message type="maxRequirementError">{LABEL} - The number of variants selected exceeds the maximum</message>
 
 <message type="shouldBeEqualError">{LABEL} - values do not match</message>
 
 <message type="dateIsNotValidError">{LABEL} - date has wrong format</message>
 </validationErrorMessages>
</contactFormConfiguration>
THIS IS THE ACTUAL CONTACT.PHP Form That i would like to link to.
<?php
//-----------------Getting data sent by flash---------------------
foreach ($_POST as $key => $value){
 if ($key != 'mail_to' && $key != 'smtp_server' && $key != 'smtp_port' && $key != 'mail_from' && $key != 'mail_subject' && $key != 'plain_text'){
 $mail_body .= ''.str_replace('_',' ',$key).': ';
 $mail_body .= ''.stripslashes($value).' ';
$message = '<html><body>'.$mail_body.'</body></html>'; // mail body
//------------if plain text is set to true removing html tags------
if ($_POST['plain_text']=='true') {
 $message = str_replace(' ',"\r\n", $message);
 $message = strip_tags($message);
} else {
//----otherwise composing message headers---------------------------
 $headers = 'MIME-Version: 1.0' . "\r\n";
 $headers .= 'Content-type: text/html; charset=windows-1251' . "\r\n";
//------------setting conf data-------------------------------------
$to = $_POST['mail_to'];
$from = $_POST['mail_from'];
$subject = $_POST['mail_subject'];
$smtp_server = $_POST['smtp_server'];
$smtp_port = $_POST['smtp_port'];
//---------setting header info--------------------------------------
$headers .= 'From:' .$from;
if (mail($to, $subject, $message, $headers)){ // sending mail
 print('&mail=1'); //succes
} else {
 print('&mail=0');//failure
?>

You can open both Muse files at once, copy the content of a page on one site, then paste it into a new page on the other site. You might have to redo some of the page styling.

How do I create a link from a pdf file to post on my website and Facebook?

I have created a pdf file from a document. Now I want to post a link to the pdf document on my website and on Facebook. In my Adobe Reader XI there is a tab that says "Create Link", but when I click onto it, it just takes me back to the original file, where it is saved on my computer, I am not real techy. If anyone can explain this step by strep, I would really appreciate it.
Thank you.

Reader will not be involved.
First, you need to upload the pdf to your website. Once you upload the file, you need to add a link to it from a page on your website and Facebook.

Creating Target links from iweb blog

how can i create a link that will open a new window and not navigate from my blog? iweb automatically inserts 'http://' and if i add a link like
'jack johson - do you remember'
iweb reads it as: http://<a href="http....
this option should be a must have for any blog software. so how can i do it in iweb??

Welcome to the discussions, tcameron.
Right now, there's no way to do this from within iWeb, though if you know how to edit the HTML, you can always change it on the server.

Import Links from JavaDocs HTML Files

When I import HTML files from JavaDoc with internal links
into RoboHelp, they come in with broken links. Internal HTML links
have # signs in their bookmarks & Robo7 does not like them. How
can I get Robo to accept these internal embedded HTML links?

See
here
for a duplicate thread.

Can I recover lost library from Windows backup file after hard drive crash?

I'm sure this has been visited before, so I'm sorry if this is redundent.
My daughters Windows notebook had to be reformatted because of a severe virus. I had all important files including iTunes songs backed up onto portable Hard Drive. Got her notebook up and running and then restored her songs back to her computer (but not into the original location). Plugged in her iPod Mini and now it shows no files at all on the Mini and iTunes will not access or recognize the songs that I restored
Prior to the restoring she was able to listen to her complete music collection on the iPod Mini.
I still have access to the backup files either on the Hard Drive or in a separate folder from which I restored the first time. Should I completely erase the songs from the notebook now and then access the backup file?
And how do I get the Mini and iTunes to recognize the music once and for all?
Thanks for any advice, help, and suggestions.
Tony
HP Pavilian Notebook Windows XP iPod Mini.

What you will do depends on if you have the "iTUnes Music Library.xml" file on backup. By default this file is stored on
C (Or the drive windows is on)/documents and settings/............/My Documents/My Music/iTunes
If you DO have this file on backup, then you will have to set all the music to its EXACT location it was before reformatting

How do I recover a lost item from the note file?

I lost one of my items on the "notes" app. How do I recover this item ?

Try http://support.apple.com/kb/ht1766

How can i get all links from html file ?

I tried some code:
List<string> metas = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
HtmlWeb web = new HtmlWeb();
HtmlAgilityPack.HtmlDocument doc = new HtmlAgilityPack.HtmlDocument();
doc.Load(filename, Encoding.UTF8);
var metaTags = doc.DocumentNode.SelectNodes("//meta");
if (metaTags != null)
foreach (var tag in metaTags)
if (tag.Attributes["name"] != null && tag.Attributes["content"] != null)
text = tag.Attributes["name"].Value;
mys = tag.Attributes["content"].Value;
var linksOnPage = from lnks in doc.DocumentNode.Descendants()
where lnks.Name == "a" &&
lnks.Attributes["href"] != null &&
lnks.InnerText.Trim().Length > 0
select new
Url = lnks.Attributes["href"].Value,
Text = lnks.InnerText
foreach (HtmlNode node in doc.DocumentNode
.SelectNodes("//a/@href | //img/@src"))
metas.Add(node.Name);
In the var linksOnPage i'm getting all the links but some of them not only links for example the first item i see:
[0] = { Url = "/", Text = "    " }
Then the second item:
[1] = { Url = "http://rotter.net/cgi-bin/forum/dcboard.cgi?az=login", Text = "התחבר" }
Next i want to add another loop or variable that will contain only the links after im src for example:
<img
src="http://mysite.com"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">
So to get only http://mysite.com
So in the end i will have two Lists:
First List will contain all links from the html file.
Second List only links that are in img src

Ok i'm using regex now and i can get the links i need:
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
string[] fall = File.ReadAllLines(filename);
foreach (string hh in fall)
if (hh.Contains("http://rotter.net") && hh.Contains("locked")||
hh.Contains("locked_icon_general") ||
hh.Contains("locked_icon_anchor") ||
hh.Contains("icon_anchor") ||
hh.Contains("locked_icon_fire") ||
hh.Contains("locked_icon_sport")||
hh.Contains("locked_icon_camera")||
hh.Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(hh))
metas.Add(m.Value);
So now in the metas i have in this case two links.
For example the first link is from this block in the file:
The link i got is : http://rotter.net/forum/Images/hot_icon_anchor.gif
And this is the right link from this block but now how do i get the text from this block and how i connect how do i know that this text belong to the link ? I need to add this text from this block to a new List. Before all that i counted on my own lines
and got the text but that's a bad idea.
I need somehow to get: שרשור תשדירי בחירות מרוכז:
To get the text between the ToolTip',' and the second ',' but not from all the html file only in places of this two links i extracted.
<TD ALIGN="RIGHT"
VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','שרשור תשדירי בחירות מרוכז:','כתב: menahem בתאריך: 03.03.15
שעה: 08:51 1. http://youtu.be/utUaqyiRkJ8 ...'); Activate();"
onmouseout="deActivate()"
href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/hot_icon_anchor.gif"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">

<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=187966&forum=scoops1">
שרשור תשדירי בחירות מרוכז:
</a></TD>

Any way to add a link FROM HomePage TO iWeb?

Any way to add a link FROM HomePage TO iWeb? The instruction I found in Help only discussed adding a link from iWeb to HomePage. Since most of my family already accesses my HomePage, I'd like to be able to add a link to the iWeb pages
This is the only instruction I've been able to find in connection with this topic: "If you’ve previously published webpages using HomePage, those pages are still available at http://homepage.mac.com/YourMemberName. Websites you create in iWeb are available at http://web.mac.com/YourMemberName/iweb/SiteName. If you’ve created webpages using the .Mac HomePage feature, you can put a link to your old homepage on the first page of your new iWeb site. On your iDisk, your HomePage sites are stored in the Sites folder. Your iWeb sites are in the Web folder."
Thanks
I use both my Mac and my Dell

I'll try this, but why in the world should it be so complex? I'll let you know if it works. but how do we tell Apple/Mac that this shouldn't be rocket science, but rather something that's done with the click of a button. They're both .mac software products. Why can't they talk to each other?
B
I use both my Mac and my Dell

Lost link from iWeb to files

Similar Messages

Maybe you are looking for