Lost messages when sending email offline with iOS6?

I'm using iOS6 on an iPad 3rd generation, WiFi only.
When I'm in airplane mode, or I'm not connected to a Wifi access point I can compose e-mail messages and press Send, and rather than getting an error saying I'm offline, the iPad displays the "sending" progress bar and makes the "wooshing" noise that it normally does if it were offline, but obviosuly the mail isn't sent - 'cos I'm not online.
However, when I connect to  Wifi point, the e-mail isn't sent - the mail doesn't appear in the sent folder, and it's not in a Drafts folder either, so I can't attempt to resend.
I'm getting the same behaviour for both an Exchange and an IMAP/SMTP account.
Both worked previously with iOS 5 (you'd get an error and it wouldn't send the message until you connect to an access point).
Is anyone else seeing the same problem? Any pointers to a fix or work-around?
Many thanks,
Mike

I have experienced a similar problem. Having sent an email and heard it go (the "wooshing" noise) I noticed a few minutes later the small symbol next to my btinternet mail box indicating that it had lost touch with its server or gone offline. I didnt think much of this but the next day I noticed that this email is not in my sent emails ( I double checked by logging into my BTemail account online and it is not in the sent email folder there either). The email was not sent, and is not saved as a draft. That's 30 minutes work gone to waste and the only reason I have found out is that I suspect this has happened before so I made  a point of checking sent items. On previous occasions I have thought that maybe I deleted the email by mistake, or didnt press send or made some other mistake. This time though I definately pressed send, definately heard the wooshing noise, and the email is now gone.
The solution would seem to be to stop using Apple's Mail system to send emails and log into the mail account on line.

Similar Messages

  • Load x# of messages when sending email from my pop account

    Hi
    I'm getting a "load x# of messages" when sending email from any address on my pop account. No problem receiving messages from other accounts. Is there a setting that can remedy this?
    Thanks

    My z10 is going back today, for multiple reasons
    Contacts won't sync across
    Won't work properly with my car when all previous BBs did
    Lots of useful features have disappeared
    But most importantly NONE of my email accounts will send mail from it when they all did previously with the Storm2.
    A big thumbs down from me for the z10 even if it is a fancy looking phone and the browser is much better. I stuck with BB because I wanted a tool not a toy

  • Why am I getting syntax error messages when sending emails thru MS Office:MAC 2011?

    Why am I getting suntax error messages when sending emails thru my outlook on my MacPro?

    What are the exact and complete error messages?

  • Since upgrading my ipad and iphone software i am receiving an error message when sending emails, saying that the email address was rejected by the server.

    Hi,
    Since upgrading my ipad and iphone software i am receiving an error message when sending emails, saying that the email address was rejected by the server.
    Please advise if this is a known problem, and what is the fix.
    Many thanks
    Mark

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • I get the following message when sending emails: The recipient "email address" was rejected by the server".  If I send the email to 3 people, one will be rejected and a different person will be rejected.  Any ideas?

    I get the following message when sending emails on my ipad:  The recipient "email address" was rejected by the server".  If I send the email to 3 people, one will be rejected.  If I send the same thing to the same 3 people a different one will be rejected.  Any ideas?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • Getting an error message when sending emails on my 4s iphone?

    just got my Iphone , but getting an error when sending emails...can anyone help

    What error message are you getting when try to send out emails and what type of email account is it?

  • "delay" message when sending emails

    hey.
    since ive upgraded to Ios4 on my 3Gs, my hotmail account is refusing to send emails to a yahoo group.
    before the upgrade i could send emails from my phone to the yahoo group without any problems.
    the phone says the email has been sent, then a few hours later i get an email from hotmail stating the email has been "delayed". then a few more hours later i get another email from hotmail stating the email has "failed", only on my phone.
    i can receive emails from the yahoo group and send/receive to any other email address's, just can not send to yahoo groups from my phone.
    i can send emails to the yahoo groups via my computer through the same hotmail account. so im down to blaming the phone and the new update, up to now.
    i have deleted my email account on my phone and reactivated it, same problem.
    the settings are all correct to receive and send mail on my phone, pop3 and smtp lines and ports.
    tried searching on google and here about this problem, but it dosnt seem to be a common issue.
    if anyone has any ideas or knows how to fix this problem, would be greatly appreciated.
    thanks.

    Exactly the same thing happens to me. I newly bought an iPhone and have never used iOS3. I started using it with iOS4 and I can reply messages of yahoogroups only from MSN Messenger app. I hate to do that. Can anybody solve this problem?

  • Error message when sending email from bb: BEGINETP 215

    when i send an email from my bb device, I get the following error. It only happens with a few email addresses; others go through fine from my bb. When I send an email to the address from my computer it goes through no problem
    Subject: RIM_bca28a80-e9c0-11d1-87fe-00600811c6a2
    This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
    BEGINETP 215
    AR0ZrgkAAAAAIBAIMjAzNUMwMzMgFGtjcm93QGxuYmNhcGl0YWwuY29tAFdDkHJQBUNNSU1F
    A0CAgICBGgAAMDlFNzc0ODJFK0crMQC4AVKlQlS3nBho4LaXXn5FABkqLTzv/krP+Pl08kMg
    owIelE2J+TqGam/4uXw/uSl+o3MRKgxTJ1lO/On0R1wHL8LkOpKGCV5OlsHFN13qfVOZwCMy
    kGgVEkJo6Fq7YIBes5X/QS0Cw3UOeM0hBammZTJC/UjkXy9J2BMxeepMzNRQKrLvbpbH8Ro!
    ENDETP -660889842
    Does anyone know what causes the error and how I can correct it.
    Thanks
    Message Edited by 416corn on 12-09-2008 10:12 PM
    Message Edited by 416corn on 12-09-2008 10:13 PM
    Message Edited by 416corn on 12-09-2008 10:13 PM

    Since Entourage is not an Apple product you should post your question on Microsoft's own forums for Entourage as they are more focused on the issue than a forum for Apple's own Mail application:
    http://www.officeformac.com/ProductForums/Entourage/

  • Error message when sending email to 100+ recipients

    I am trying to "reply to all" on an email I got with 103 people on the list. I get an error message that says, "the server did not recognize the following recipients" and lists about 25 recipients. It also says the message will remain in my Outbox until it can be delivered.
    What does this mean and how do I fix it?

    Yes, I was just about to mention the fact that most ISPs limit the number of outgoing eMails, to cut down on SPAMming supposedly, so you figured it out yourself.
    There are pther reports here in the past of the same problem... cure was exactly what you did.

  • How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • When sending email message appears "sending the message failed because you exceeded your sending limit. A copy has been placed in you outbox"

    When sending email message appears "sending the message failed because you exceeded your sending limit.  A copy has been placed in your outbox"

    Who's the provider? Do they have a limit?
    https://discussions.apple.com/message/22929931#22929931

  • When send email with emoticons to a pc user, emoticons show as an empty box. Also, email content has a symbol on every line. How to stop this from happening?

    When send email with emoticons to a pc user, emoticons show as an empty box. Also, email content has a > symbol on every line. How to stop this from happening?

    Dear Mr. Toad (my all-time favorite ride at Disneyland ;-) ..
    Thanks so much for your detailed reply.. my netbook is in the bedroom, turned off.. I (so far) only use it in the evening, in the bedroom.. I've saved your response, and will try your suggestions, and let you know if they solve the problem I described. I really appreciate you taking the time to post such a detailed reply..
    I can't answer your Thunderbird "configuration" questions, because I'm in the living room, using the crap Vista laptop, on which I plan to install Thunderbird, and then take Windoze Mail out in the street and drive over it a few times.. I'll get back to you one way or the other, and let you know if your instructions solved the problem, or not..
    I don't understand why Thunderbird "out of the box", so to speak, simply doesn't forward HTML emails with embedded graphics, (like Outlook Excess, and Winblows Mail do).. without having to go through those steps. I personally HATE HTML email, but over the years, it's become more and more prevelant.. so it's a problem I must fix..
    Thanks again..
    Harv..

  • I am losing my carriage returns when sending emails. How to keep? uses SMTP Email MIME Text Content-Type.vi

    I am losing my carriage returns when sending emails using the Internet email vi's.
    All carriage returns are stripped out and I get one long word wrapped paragraph.
    I want to avoid html.
    Ideally, using the vi's for rich text would be perfect, but a simple text message with carriage returns and line feeds in any font ok. 
    uses SMTP Email MIME Text Content-Type.vi
    i have tried text/plain, text/html, and mixed yada something

    You need to use Line feed constant and then use concatenate function.See the screen shot.
    Naqqash
    Attachments:
    Using Line feed.png ‏15 KB

  • IPhoto quits when sending email

    iPhoto quits when sending email in iPhoto.

    Thanks Terence,
    What version of iPhoto.
    - What version of the Operating System.
    I recently upgraded to iPhoto '11,ver. 9.3.1.
    I have a MacBook Pro running 10.7.4.
    Previously I had no issues sending emails with iPhotos via my mail application.  Now I can't email out of iPhoto or out of mail.  iPhoto just quits.  There are no error messages.
    I have started a new iPhoto library separate from my original library.  Still quits.
    I have opened a new account for start-up, still quits.
    Any suggustions will be appreciated.
    Thanks,
    Ron
    - What steps have you tried already to solve the issue.

  • Attachment failure when sending email

    three days ago I detected the problem with Convergence,attachment failure(any type of files) when sending email,the attachment suddenly disappears (confirmed by checking the convergence webmail Sent folder and the recipient only receiving the body text message without the attachment(s)) .However , sending with attachment through mail client software such as Thunderbird is OK . before this problem happened , the system can send email with attachment without any problem . Please help on how can I fix this ?
    the java messaging server details :
    Sun Dir LDAP
    #./iwcadmin -V
    Sun Convergence 1.0-10.01 (built September 6 2009 - 18:29:30)
    Sun Java(tm) System Messaging Server 7.0-3.01 32bit
    on Solaris- Bourne shell
    #uname -srv
    SunOS 5.10 Generic_137137-09

    mattzyzy wrote:
    -all users experiencing the same problem now with Convergence
    I don't see this behaviour with my test Convergence patch 10 install (Comm-Suite-7). I should point out that you need to be running MS7u3 a.k.a. MS7.3-11.01 as per the documentation:
    http://wikis.sun.com/display/CommSuite7/Communications+Suite+7+Component+Products+Release+Notes#CommunicationsSuite7ComponentProductsReleaseNotes-RequirementsforCommunicationsSuite7
    "Communications Suite Component Requirements for Convergence 1 Update 3"
    "Messaging Server - Webmail Server => 7 Update 3"
    -Firefox 3.0 ,3.5 , IE 7,8
    small attachment size 100KB to 400KB - PDF ,MSWORD (DOCX AND DOC), -all the types that work prior to this problem happened .Do the users see the size of the attachment displayed next to the attachment name after uploading it?
    Regards,
    Shane.

Maybe you are looking for

  • Email activity not working on Clients site

    Hi, I created a Bpel process that contains an email activity, It works fine when I am connected to the Oracle network through VPN and while i am in the Oracle office. But when I am at the clients site or connected through VPN, it doesnt work at all.

  • How can I get credit for movie that I am unable to watch on AppleTV

    I ordered to rent "The Hobbit" over a week ago to watch on my AppleTV, but every time I tried to start movie, keep getting error message and to try again later. I have tried more than 5 different times since, still unable to watch movie.

  • Firefox is lagging

    Hi folks, I hope this is right here, I've got a problem with my firefox since a few days. It is lagging for a while after starting it. It takes a lot of time longer for it to answer pressed keys or other input. After a few minutes after starting it,

  • Not able to connect pws prime cable provisioning

    Dear all.,    We are not able to connect the provisioning web service of prime cable provisoning . We installed prime cable provisioning all in default. We can't find the correct port aaddress for example we installed in centos machine IP is 10.2.0.1

  • CALL FUNCTION STARTING NEW TASK  DESTINATION

    Hi All, I have tried to use CALL FUNCTION 'ZWHV_TEST' STARTING NEW TASK 'TEST' DESTINATION 'NONE' But it didnt work. Please explain me  to use above statement and detail me more about NEW TASK 'TEST'. How to declare TEST in new task ? Thanks , Vinay.