Lost midi and audio drivers!?!?!?!

I also cannot copy and paste using the key commands and I am very worried that ALL of the Music i've been working the past few years will not be retrievable. PLEASE HELP!

Sounds like you've got your drag mode (upper right of arrange) set to one of the shuffle settings.

Similar Messages

Garage band wont work, need to install midi or audio drivers?

tried backing up my comp to install OSX leopard but failed. now garage band wont work! I keep getting this message...also want to know if its possible to upgrade to osx leopard with a 4th gen macbook that runs osx 10.4.11
*garageband has detected a possible conflict between one or more third party midi or audio drivers.*
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer. For instructions on removing older drivers, consult the manufacturers' documentation.

Im having the same problem, I upgraded my IMAC and was using tiger and I upgraded it to MAC 10.5.7, now GarageBand wont work saying my midi and audio drivers arent correct. My Reason 4.0 wont start either saying the same thing failed to open the midi library. My Protools works fine but I dont know how to update the audio and midi drivers that it matches the software I uploaded. I also went to the audio midi set up and it read, Audio MIDI Setup was unable to launch the MIDI Server. This means that you will be unable to view or edit your MIDI configurations.
Improperly written MIDI drivers can prevent the MIDI Server from launching successfully. If you have recently installed a new MIDI driver, try uninstalling it and then relaunching Audio MIDI Setup. If Audio MIDI Setup works correctly after that, then please contact the driver's manufacturer for further support.

Conflict between one or more third party MIDI or audio drivers

I have a Logic Pro 8 session with 17 audio files, each one of which have 2 to 4 plugins.
Every time I try to bounce the session to an .aiff or .mp3 this dialog box appears:
Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older or unused drivers.
I haven't installed any extra drivers/midi controllers/software. I just work entirely with Logic and an M-Audio external card (which is unplugged and audio preferences set to Built-In Input). And anyway, this issue arose after having recorded all the audios, after doing the editing, so no other possible installation move was done.
Please, help me find a solution.
Thanks.

I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
Nothing on User/YourName/Library/Audio/MIDI Drivers.
I have found 3 AVID folders on Applications:
- Avid MetaSync Manager
- Avid MetaSync Publisher
- Avid_Uninstallers
Shall I remove these?
There is also an empty folder called Digidesign on User/Library/Audio/Plugins
I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

Possible conflict between one or more third party midi or audio drivers

just wondering if anyone has any new info about this error yet. i can't resolve it and still can't open many of my logic 7 files.
thanks

koltonmusic wrote:
thanks for responding.
i have many times removed and or re-installed all of the midi drivers.
this problem occurs even without any midi or audio drivers in the system. this has been a problem since logic 8 came out for me and others. one user sent some L7 file sto apple and he said that evn apple support has reproduced the problem. that was last year.
i was just hoping that there might be some new info out there.
thanks
Hi,
In this case, I recommend you do a clean install of your operating system. Make sure you back up your important data beforehand.
Afterwards, install Logic 8, and test it with the internal audio only. In other words do NOT install any third party drivers of any kind.
This should work very well. If it does not, then I would suspect your motherboard has issues, and should be replaced by Apple.
Cheers

Midi and audio in quartz composer.

I am fairly new to quartz composer. Does any one know how to set up the midi input or controller in it? I can set up a basic image, but it will not respond to me playing my midi keyboard. I am so lost.

You just select Midi and Audio tracks while holding down the shift button. Arm both tracks->select the Midi track first (click into track header) ->hold down shift->select the Audio track->both track headers turn grey->record->have fun...

HT5628 How to fix track pad and audio drivers if we install windows 8 on macbook pro??

Can anyone help me how to install track pad and audio drivers for my MBP if i install windows 8 on it?

Run Boot Camp Assistant and select the menu option to download the Windows Support software, Then start Windows and install the Windows Support software. Follow the Boot Camp instructions which detail how to download and install the drivers (Windows Support software).

Windows 7 Wireless and Audio Drivers on 2010 MacBook Pro

I have a new MacBook Pro i7 2.66 Mhz with Snow Leopard and dual boot to Windows 7 64 bit Ultimate. I can't find the correct drivers (Windows 7 side) to get the audio and the wireless networking operating. I ran the bootcamp setup from the Snow Leopard install disc on Windows 7. It gave an error message that this model is not supported. I then ran each software driver individually from the install disc and was able to get all to work except the audio and wireless. I then installed the Bootcamp 3.2 update from the Internet with no improvement.
Does anybody know where the audio and wireless drivers can be located for Windows 7? (Apple Support has not been able to resolve the problem yet) Thank You!

I'm having the same problem with Windows 7 64-bit Professional. I had to go through the same process to get most of the drivers installed. I've had the same issues with the wireless and audio drivers.
To get the Apple drivers installed, I followed the instructions from this blog post.
http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang= en
Has anyone had any luck with the rest of the drivers?

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Error Garageband - can't sync midi and audio

I have no midi attached but still get an error message "Can't sync midi and audio".
All I am trying to do is record a voice-over using the built in mic on the iMac. But this error message keeps popping up constantly. I close it and then 10 seconds later it pops up again.
Why is garageband trying to sync a mid that I have not connected?

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Can't Record Midi and audio Simultaneously

I just noticed that I cant record audio and midi simultaneously. I wanted to record a audio vocal track as I was recording a midi piano track but it wouldn't record. If I selected the audio track, the midi track wasn't heard. If I selected the midi track, I could hear the piano, but the audio wouldn't record. Weird. I had to record the midi track, and then go back and arm 2 audio tracks for recording. One for the vocal and the other to convert the midi track into a audio track. I don't understand why I can't record midi and audio at the same time. I am using a MOTU 896HD for my audio, so I can record up to 8 audio tracks at a time.
Does anyone have any clues as to how to set this up to record midi and audio at the same time?

Setup your audio and midi tracks and then hold the shift key and hit the record button on each of them. Both audio and midi will record.

Midi and Audio tracks simultaneously armed for recording

All, whilst engaged in laying down the bass track for the guitar solo section of my latest monster his, I encountered one of those sorts of frustrations that makes one long for some means of swift egress from this mortal coil, this vale of tears: that is, while laying down my totally awesome bass track that when they hear it will send JP Jones and Boosty Collins to employee as actuaries, I kept getting the hateful "unable to synchronize the audio and midi error." I'll spare you the catalog of the various lame attempts I understood to remedy this problem, as well as the curses directed toward my fate, and Daw ineptitude in general. Then I nnoticed that both the software instrument tracks (Addictive drums) and the audio track (aforementioned bass) were both armed for recording, signified by the red R in the track header! Well, upon de-arming the software instrument track I was able to record by bass line in a mimimum of takes, and as visions of illegal intozicants and comen of questionable morals dance through my noggin as recompsense for my trouble, with to make the point to all relative newbies such as myself that the answer to problems that seem on surface intractable as usually staring you right in the glazed eyeball.

What?...
I'm sorry maybe I don't understand everything you are sayng... but I can replay to the titles of the Topic!
Actually recording a MIDI instrument and an Audio Track symultaneously comes with serious bug!!!
you cannot use Punch-in on Fly when an Audio and instrument track is armed at the same time...
or better you can but the MIDI and audio output will be dropped for a moment
Provide a Logic feedback
http://www.apple.com/feedback/logicpro.html!
THIS IS A LOGIC 8 BUG!!! BIGGEST SERIOUS BUG!
I suggest you to use Logic 7 when you need that!
Thank you so much for remember me this..
I'm sorry no alternative solution... or.. if you have 2 Macs you can use one for Logic MIDI and another one for Logic Audio!
G

How to record midi and audio at the same time?

Hello,
I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
Thank You.

Hi
Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
The audio track must be 'Record Ready':
HTH
CCT

USB/Firewire Interface for MIDI and audio (Garage Band)

I want to connect a Roland Handsonic (electronic drum) and Shure microphone to a Mac Pro for recording in Garage Band. What is the best USB/firewire interface for MIDI and audio?
Mac Pro desktop Mac OS X (10.4.8)

If you click one of the links you can read all about it in depth.
three guitarists
That's not what you asked for B-)>
Once you want more than 2 audio inputs, the prices start jumping up dramatically.
would this be the best interface to use?
If you really want "Best" then it's a simple answer:
http://www.bulletsandbones.com/GB/FirePod.html

Logic i/o midi AND audio?

im trying to use the Logic i/o plug in , not sue if im doing it right?
I have a sound module thats going into my 828mk2 inputs (11&12) and midi set up.
I can play the module fine from Logic but i thought that when you used the i/o plug in you could set up ONE track to use (like a internal plug in) that became the midi and the audio in order to record the track?
Do i have to record on a MIDI track the part from the module and then use a different audio track to capture it?
Im sure once i used a instrument track with the i/o on it and it became a midi/audio track all in one for outside gear? so i could record/midi all within the one track?
Am i being stupid?

so how do i use the external instrumnet and the i/o together?
External instrument on the instrument slot on a software instrument channel. This handles both MIDI and audio routing. What do you want to use the I/O plugin for? If you want to route to external hardware, then put the I/O plugin on one of the FX inserts on that software instrument channel.
Can i make my hardware become like a VST? and if using both utilities can i render a file to audio like i can a vst?
No, you have to record it in the conventional way.
or does it have to be real-time bounce only?
Yes, external instruments have to be played in real-time. Logic cannot yet speed up the universe to perform faster than realtime bounces - at least, not in Logic 8...

Experiencing Delay Between Midi and Audio MOTU 828 Mk1

Hi everyone
Wondering if somebody can point me in the right direction. I'm using an Intel iMac running Leopard 10.5.8 and Logic 8. I just got hold of a MOTU 828 MkI and am experiencing a severe delay between midi and audio.
Clock source is set to internal in the 828 settings and sample rate is set at 44100, so that's all as it should be.
I'm at a loss has anybody got any ideas?
Many thanks.

Hi,
I assume MIDI is earlier than audio.
Do You have plugins in busses and or master outputs?. Try to disable them and see if that still happens.
Here I had issues with 9.01 that aren`t plugin related and had to reboot to solve it. I upgraded to 9.02 and didn`t see them again (yet.)
If you HAVE to have your plugins in the busses and master and still want to have your MIDI properly aligned... Well you´re asking too much, my friend. Write a polite letter to Apple telling them if they´re joking calling Pro to this app that can´t keep two basic features in sync. BTW: same happens with video (at leat in L8. Didn`t check 9 with that yet)
After that, breath deeply and use the input objects to route your midi instruments inside Logic. Then they´ll be in sync, but at the price of loosing all their analog warm. Weird, isn´t it?

Lost midi and audio drivers!?!?!?!

Similar Messages

Maybe you are looking for