Lost Mobile Network After upgrade to Win 10

Hi, any thoghts on an issue on 2nd gen X1 (3460-2SG) that after Win 10 upgrade lost Mobile Network but has WiFi OK?Looked for updated drivers but found none...Looked in "Mobile accsses" tool in previous profiles i had, and it states  "device is not found" in front of the H5321 gw Mobile broadband driver Any help will be much appreciated

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY TouchSmart 15-j001tx Notebook and the Touch display doesn't respond to touch after a Windows 10 update. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. Here is a link to your driver page. I would try the section on Driver -Chipsets. Intel Management Engine Interface Driver should help. Restart the Notebook after the install. I hope something here helps you. Thanks.

Similar Messages

  • Lost mobile functions after upgrade from Adobe PDF Pack to Creative Cloud

    I think mobile functions ar part of Creative Cloud (Student)  with respect to Acrobat Pro XI module: e.g. PDF conversion
    I have contacted Adobe Chat already and shall now contact this forum as very next step.
    However, my Reader App does not support PDF conversion any more since Adobe PDF Pack licence has expired but still a Creative Cloud licence is in effect.

    Moving this discussion to the Adobe Acrobat.com Services forum.

  • Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2?  My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

    Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2?  My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now.  I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
    I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
    Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service".  My iPhone 5 works perfectly on iOS 8.1.2, on Cellular.  I've browsed the blogs and have tried Apple's suggested fix, all to no result. 
    Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
    I've filed a report with Apple, along with a request that they contact me, but no results yet.
    Help? (and thank you).

    Hello razmee209.  Thank you for your response.  I spent the better part of yesterday working with Apple Support.  They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total.  Same problem.  I restored from the cloud to recover my apps, same problem.
    AT&T installed a new sim card - same problem.  I spent time with AT&T Support yesterday, too.  In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
    I didn't have this issue before I upgraded to iOS 8.1.2.
    Everything else with the iPad works fine:  WIFI, Personal Hotspot, email, all my apps, etc.
    In browsing the web for this issue I see that many other folks have the same problem.  I filed a report with Apple this morning, requesting that they contact me, but no word yet.  I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
    At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
    Thanks again for your response and suggestions.

  • After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

    After upgrading from Win 8 to 8.1 my  DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

    Hey hvbnfrgvn,
    Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
    I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
    If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
    I hope this information helps, please keep me posted on how it goes.
    Best of luck and have a great day!
    I worked on behalf of HP.

  • MacBook can't see my home wireless network after upgrade to OSX 10.8.5

    After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

    It appears an SMC reset was required:
    HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
    Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
    If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

  • System recovery fails after upgrade to Win 8.1 on Satellite L75D-A7283

    My elderly uncle forgot the password to his Win 8 user account sometime after upgrading to Win 8.1. He was the administrator, we haven't been able to get Microsoft to reset the account, so I thought to roll back the computer to its factory installation of Win 8.
    However, when I try to do that, I get as far as the Reset your PC screen and find that the only target OS is Win 8.1, not the original Win 8. Ok, I accept that. But after choosing to restore Win 8.1, it says "Unable to reset your PC. A required drive partition is missing."
    I have examined the disk by removing it and attaching it to another computer and find that both the original Win 8 recovery partition and the new Win 8.1 GPT recovery partition are both there. They just don't seem to be accessible.
    It seems that the Win 8.1 upgrade has made the original factory recovery partition inaccessible, which is not particularly helpful. We have no recovery disks to work from, so I think my only recourse is to try to get a Win 8 factory recovery disk from Toshiba, but I wondered if anyone else has a suggestion? Thanks.

    Satellite L75D-A7283
    It's my understanding the upgrade does not modify any other partitions while upgrading Windows itself. Seems likely something else is wrong.
    If you did not create recovery media before and cannot do so now, then obtain it from Toshiba. Scroll down to Get Recovery Media here.
    All the information in the section Recovering the Internal Storage Drive, which begins on p. 53 of the User's Guide, should still be applicable.
       Satellite/Satellite Pro L40/L50/L70/S40/S50/S70 - A Series User’s Guide
    -Jerry

  • After upgrade to Win 8, the key's has changed

    After upgrade to Win 8, the key's has changed, for example, when i am trying type @ but the key has changed as ". so please help me to rectify the problem.

    Hi,
    What was the keyboard language BEFORE and what it is NOW ? Did you use SAME KB language for both Windows 7 and Windows 8 ? When click to the KB (bottom right corner) what do you see ? This is mine:
    Please use instructions from the following link to fix:
       http://windows.microsoft.com/en-AU/windows-vista/C​hange-your-keyboard-layout
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Webdav login on mobile network after update to IOS7

    Hi
    I am unable to login to webdav when on mobile network after update to IOS7, it just keeps asking me to login, but when i'm on wireless it works.
    annyone else experinced this? or know of a fix?
    Best regards

    Hi, MargretheHostgaard. 
    Thank you for visiting Apple Support Communities. 
    Sometimes a simple power cycle of the router can correct the issue that you are experiencing.  However, the issue could be a little more complex.  Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology.  Below, I have included two articles.  The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection.  The second article cover the recommended settings for current Wi-Fi access points.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    Cheers,
    Jason H.

  • Cant get  contact with network after upgrading to 5.01

    Cant get contact with any network after upgrading to 5.01

    Do you mean:
    1)  You can't connect to the network of your carrier?
    2)  You can't connect to wifi network?
    3)  You can't connect to 3G network?

  • IPhone 3GS cannot access to 3G network after upgrading to OS 5

    My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
    Any idea how to resolve this?

    zlwczr wrote:
    Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5? 
    No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

  • I lost my contacts after upgrading to IOS6 on iPhone 4

    I lost my contacts after upgrading to IOS6 on iPhone 4

    At the most inconveient time possible(vaca) after downloading ICloud, All my phone contacts disappeared :( Wishing I knew how to uninstall to the way my phone was before.I leave in 4days.

  • Lose network after upgrade to v.FF1

    I'm losing network after upgrading to v.FF1.  At the moment the only way I have found to resolve this is to turn off the device, remove the battery, wait about 30 seconds and then reinsert the battery and turn the phone on.  Sometimes it works for about 8 hours other times only an one or or less before I lose the network again.  Any suggestions?

    These problems have been pretty widely reported and discussed after the Stratosphere update. Try looking at the comprehensive thread https://community.verizonwireless.com/thread/783651. It's quite long, but connectivity issues are discussed in it.

  • Has anybody lost imported photos after upgrading to Lion? (iphoto11)

    Has anybody lost imported photos after upgrading to Lion? (iphoto11)

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate

    HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate
    what can I do?

    Uninstall the current audio driver and install it again.
    other option is trying driver from microsoft update.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • Icloud stopped after upgrading to win 8

    icloud stopped working after upgrading to win 8.
    Says "map cannot be found".
    Any suggestions? Or will it simply not work with Win 8?

    Solved.
    Needed upgrade to 2.1

Maybe you are looking for

  • Ipad 2 bloccato sul logo della mela ???!!! ipad 2 stucks on apple's logo!!

    ciao a tutti spero possiate aiutarmi! My Ipad 2 is stucks on Apple's logo and it's always off! when I connect it to pc itunes doesn't recognize my ipad and it doesn't appear on itunes page ! how can I resolve this important and terrible problem??? Th

  • What is SCADA and how to integrate with SAP

    Hi all, I am new to SCADA and i would like to know 1. what is SCADA 2. Purpose of SCADA 3. how to integrate SCADA with SAP 4. In SAP for which module we can use SCADA 5. Wether SCADA is used for only PM(Plant Maintanence) in SAP Thnx in advance, Vish

  • Color grade from after effects to premier

    I started my color grade in after effects before i edited my video how do i send the footage over to premiere using dynamic link? or should i export the footage individually and then import them to premier?

  • Knowtilus Pro deleted a day's work! How can I recover?

    Yesterday I spent the day preparing my week's work (travel writing) in Knowtilus Pro. This morning I opened Knowtilus, and all of the documents I had created within it had disappeared, leaving three blank documents in their place. Had this been an OS

  • Slow phone after iOS4 upgrade? Try this...

    I upgraded my iPhone 3G recently to iOS4, and experienced the general slowdown that others have reported. I also had problems with photos not displaying correctly. I deleted and reimported the photos, and that solved that problem, but the slowness an