Lost my ability to scan after update...Hp laser jet cm1312nfi MFP
lost my ability to scan after update...Hp laser jet cm1312nfi MFP
The scanner should work using Image Capture, have you checked to see if the device is seen when you launch Image Capture. It is possible the device is simply hidden and you cannot see it.
If you cannot see it then use the Reset Printing System feature.
Finally if you still have no luck then you may have to pay for a scanning app, VueScan is highly recommended and can be found by clicking VueScan
Similar Messages
-
How do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3
how do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3
Hi dreamafrombartow,
I hope you are able to get your pictures back. Do you have a backup anywhere else?
I did find a couple articles that may help with your recovery.
If you need help restoring an iCloud backup
http://support.apple.com/kb/TS4036
iCloud: Troubleshooting missing information after restoring an iOS device
http://support.apple.com/kb/TS4605
Best regards,
Nubz -
lost all contacts and data after update iOS 7.1.2, how to recover all the data?
it's very important to me...Restore from your last backup file.
-
HELP!! Lost some of my contacts after update to iOS 7.1.2
I lost most of my contacts after updating to iOS 7.1.2 last night! I can't see the contact in my contact list but when I text/call they are there...what is going on and how do I restore this to see all contacts?
It never happened to me, but try to Reset the iPhone by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears and ignore the red slider.
-
I lost firmware in my iphone after update
i lost firmware in my iphone after update.it always continously rebooting now. even i change lower ios but still same problem.wi-fi,carrier features are not visible.can anyone help me out.
put your phone into DFU mode and connect to itunes, let itunes restore your phone to latest firmware, if your phone is officially unlocked then it should restore normally else if it's carrier locked then you need original sim it came with. search internet for how to put your iphone to DFU mode
-
I lost all my phone contacts after updating my iPhone 4 to iOS5.
I lost all my phone contacts after updating my iPhone 4 to iOS5. It's not just contacts, my photos, messages, mail and everything is gone. I did the back-up thing on iTunes too before I updated the iOS. The only thing that restored was the apps. Is there anyway to get this back?
If you no longer have service with AT&T, I don't believe you can.
-
i had lost all my contact info after update the software.
how can i retrieve it?You should have been syncing your contacts with your computer all along. They should be in your computer in whatever program you have chosen to sync.
-
I have hp laser jet m1005 mfp can we scan document pdf format?
Dear Sirs,
I am useing hp laser jet m1005 mfp, can i scan and make PDF document insted of JPEG etc.
Kaushik
kaushikHello Kaushik9
The product you have is a commercial printer. I suggest posting in the HP Business Support forum for a better chance at finding an answer.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue. -
When I first installed iPhoto '11, it would not accept imports of RAW files from Fujifilm X10, then when doing an RAW file compatibility update in around April 2013, I could then import X10's RAW files, but when I did the latest RAW file combatibility update about a week ago, I now seem to have lost this ability, WHY? How can I restore this feature?
For what I understand:
The problem is that the update applies to the IOS not the software itself (iPhoto or Aperture) so rolling back is almost impossible.
Meanwhile the most effective way is to send feedback requesting the update:
http://www.apple.com/feedback/iphoto.html -
Problem with printing and scanning after updating to Mavericks for my Photosmart C7180
After updating my macbook pro (mid 2009) to Mavericks, I have found that I can only scan to a jpeg2000 and cannot scan as a tiff or jpeg or anyother format. I have followed instructions on troubleshooting and have not been able to make anything work ie scanning from preview etc. I have now uninstalled all the HP software and tried to load it again but software update will not recognise that I do not have the software for my printer. What do I do now?
Hello Cyd23, welcome to the forums!
I understand you're having issues with scanning since you upgraded to Mavericks. I have looked into this concern for you and found that there is no downloadable driver with the full feature software (scanning software) included for the Photosmart C7180 and Mavericks.
However, there are work around options for scanning that may help and work!
Please see this link for the other methods: OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
I hope that helps!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Video signal lost on launch of iTunes (after "update")
I just (foolishly) "updated" to the most recent version of itunes. And, surprise surprise, a headache has ensued. I am using a mac mini hooked into a TV via HDMI (the setup is mac mini ---> receiver ---> TV). After the itunes update, Weirdly, when I launch itunes, the video signal gets lost. The application appears to start without any problems at first, but 10-20 seconds after launching, my TV goes black. I've never encountered a problem like this before (I've had my mini hooked to my TV in this setup for some time.) Any thoughts on how to try to address this issue would be greatly appreciated. (If only I had this computer on time machine, I would go back an hour and all my problems would be solved.)
I had the same problem after installing Snow Leopard.
But now it seems magically fixed after updating to 10.6.2 -
Hi
I lost all my contact number which save on i phone 4 after update iOS6. How can i get back?If the contacts were stored on icloud, then be sure the device is connected to icloud (Settings>icloud) and also that contacts are turned on (on the same screen in settings).
-
Won't scan after updating to Mavericks on Mac
After updating my Mac to Mavericks, now my printer won't scan. It WILL print, however. But when I try to scan, I get this error message:
The scan cannot be performed because another program has control of the HP imaging device. Try the following steps: Restart the program. Close all programs that may be using the device. Reboot the computer.
I have done all the above. I have also turned off the printer and unplugged it for a few minutes. I have rebooted repeatedly. Thank you for any help you can offer!
This question was solved.
View Solution.Hello martelloeugene,
Welcome to the HP Forums.
I see that you are having some scanning issues since you upgraded the operating system on the Mac.
Seeing the HP does have a full feature software and driver bundle for this particular operating system, I suggest that we start from scratch.
If you have the usb cable connected to the printer and the Mac, please remove it from both ends and leave it disconnected until further notice.
The first link I have for you gives instruction's on How to reset the printing system. Once we have the first step done, click on the next link for instructions on how to Repair disk permissions.
The last link I have for you is the HP Printer Drivers v3.0 for OS X. You will be given instructions on when to connect the usb cable.
If you are still having issues with scanning, I suggest then checking for apple updates as well as using the apple software for scanning.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Lost connection to Apple TV after updating my iPhone
My iPhone lost the connection to Apple TV frequently after updating to 6.0.1 but it worked well before.
It is time to update the os for Apple TV? Or there is a bug in 6.0.1 for iPhone?My iPhone failed to AirPlay the photos to Apple TV after updating my iPhone to 6.0.1.
Only mirror works but can not play videos for photos app.
There definitely are bugs in iOS 6.0.1 -
Ive lost all contacts and messages after updating to ios5 ??? Help
Ive lost all my Contacts and messages after updating to ios5 ??? Help
How can I get them all Back ???Have had the same issue - and conflicts between PC, Ipad and Iphone. Gained 6000 names and lost contacts or contact contents. Have had to edit on PC. Spoke with Apple Express and was advised to do editing only on PC and then sync. Was also told not to use Icloud until problems had been solved. Have spent last two weeks recreating my contacts list.
Haven't yet bothered to reclaim my missing paid ring tones.
Maybe you are looking for
-
I have never set a firmware password on mymacbook pro, but when I hold down option to boot from a different drive, I geta lock, and have no idea what the password is, i am the first owner of my mac so its impossible that someone else has set the pass
-
BPM process most of the time not started,
Hi XI dudes, In our latest XI scenario we read a file from a shared folder (on the same host as the xi server is installed) and we pass the input into an BPM scenario. There is however a very annoying behaviour: the file is always read correctly, but
-
Multiple Structures in a Query - Is it possible?
We would like to create two structures that will be used to group two characteristics in the rows. Each structure would contain two selections. In the columns, we have a single key figure of value. In the rows, we have a structure that groups one cha
-
Invalid username/password when running VSM1.3
Hi, I have the issue of invalid username/password when running VSM 1.3. When I ran authentication.java , I got the error as follow: oracle: Exception thrown from getService method of ServiceLocator class: Lookup error:javax.naming.AuthenticationExcep
-
Proportional controller connected to a function generator
Hi.... We'd like to connect some output from a proportional controller to a function generator which produces a square pulse with variable duty cycle. The question is what proportional controller to use here and if there is any examples related? And