Lost my audionote apps and its data, all the photos after upgrade to latest ipad software

Hi all,
Today I upgraded my ipad software from 4.3.5 to 5.0.1 via the itunes my macbook pro. During the upgrade the system automatically backed up my ipad. However, after the upgrade, I have found out that all the data for my apps such as audionote lite, as well as photos under the Photos folder are gone, even if I have tried to restore them from the backup on my mac.
I called the apps tech support tonight. The guy over there said only photos, calendars are backed up and restored after the upgrade.
Do you know if there is a way to restore my audionote files, which are one of the most important files for my life.
Thanks a lot,
saduser1

Hy,
I did it.
All data from other apps where restore perfectly.
Only Audionote are missing.
In the icloud backup I see there is 1.2 gb. of data in the audionote app. but...................
How can I get them?
Thanks.
Andrea

Similar Messages

  • When I try to sync photos, I followed all the steps, picked one folder.  When I hit "apply" I get this error message: Are you sure you want to remove 30 apps from iPad.  This will delete these apps and their data from the iPad. What have I done wrong

    When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library.  When I hit "apply" I got this message:
    Are you sure you want to remove 30 apps from iPad.  This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
    (By the way, the memory is not even one quarter full)
    Thanks for your help - Pat

    I have the same problem.  I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad -  clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad.  WHat is going on and how do I correct this? Thanks

  • LR5 won't import photos Ijust took.  Keeps coming up:"The following files were not imported because they could not be read."  And it's ALL the photos.  never had this problem be4.  what gives?

    Keeps coming up:"The following files were not imported because they could not be read." And it's ALL the photos. never had this problem be4. what gives?  Using an SD card, its a 64GB 600x Speed .  I'm on a Mac 10.8.5; iPhoto has no problem importing them.

    In order to see the windows that show sharing and permissions I gave you above, you have to right click on the the item, e.g. folder, HD, etc., and this window comes up.  Then you right click on "Get Info" and the windows with S/P pop up.  In LR%, if I right click on Destinations folder, this is what comes up:
    There is no option to "Get Info", and if I right click within Destinations folder, this is what comes up:
    Still no "Get Info".  If I click on the specific file (in this case "2015), this is all I get:  Last thought, yesterday out of desperation, I called the Apple store.  I am operating on Mountain Lion operating system, and Yosemite is the latest (as of 10/14).  The manager suggested that if there had been an update in LR5 that was now only compatible with this later system, maybe that was the issue and I should consider updating to Yosemite.  I had no problem downloading photos as of 9/14, but don't think I've done anymore since their update….when was the last LR5 (I'm using LR5.7 currently)?   Do you think this might be the problem with permissions?

  • IPhoto for iOS removes the GPS exif data from the photo after an edit

    iPhoto for iOS removes the GPS exif data from the photo after an edit
    Using the iPhone camera, I take a photo and then I want to make the photo a little brighter.
    So, I edit a photo using iPhoto for iOS and then save the photo back to the camera roll.
    Now, I might want to see where that photo was taken via another app (like Photo Mapo) or on the map using the Photos app, or even the Mac iPhoto app.
    However, the GPS data has been removed. Looks like all of the other exif data is still in the photo.
    Why not just have a feature to remove the GPS data if the user wants? no reason to remove it for them.
    The user explictily chose to have location services turned on so the GPS data would be in the photo.
    Is this a bug?
    Thanks,
    Brian.

    First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    None of my cameras has a GPS function so I never see that data in the info of a photo in iPhoto for iOS. But I do see the map choice to set a location for the photo. Perhaps a reboot will fix this for you.

  • Need help getting multiple user accounts access an app and its data

    Hello All,
    We recently got a new iMAC. We set up 3 user accounts in it. Two are admin accounts (one for me and one for my husband). The third is a user account with parental controls turned on (for our kid). Here is the basic setup:
    1. Accnt1 - admin
    2. Accnt2 - admin
    3. Accnt3 - user
    Now, I installed the complete national geographic application on the iMAC along with all the data. This is a 6 CD set that took several hours to install. I installed it logged in with Accnt1 (please see above). This installed all the data (150 years worth of data) onto the Documents folder for Accnt1.
    The installation was successful and when I launch the application, I can view all the data from Accnt1.
    So what is the problem? I tried logging in from Accnt2 and Accnt3. While the applciation is visible and will launch from both those user profiles, no data gets displayed. My guess is that this is because the data from the 6 CD's got installed onto the Documents folder for Accnt1 which is not viewable/accessible from Accnt2 and Accnt3. Therefore, nothing gets displayed.
    How do I fix this issue without reinstalling the software so that ALL 3 user accounts on my iMac can access the application AND its data?
    My guess is that I will have to provide user permissions/access to the Documents folder for Accnt1 such that both Accnt2 and Accnt3 are read/write. I tried to do that via the Finder and 'More info' operation wherein I click on the tiny lock icon at the bottom of the screen and add Accnt2 and Accnt3 as read/write. But this does not fix the problem for ALL folders further down and I dont want to fix each and every folder.
    Is there a quick way to resolve this problem? Can I fix this issue via a terminal window with a command?
    Please do help me out.
    Thanks in advance
    Anonymous76

    Move the data folder out of A's documents folder and into /Users/Shared. Then, control-option-command-drag the data folder from its new location back to its original location in A's documents folder. This makes an alias. Log in to the other user accounts and repeat the process for making aliases, to each user's Documents folder.
    You might also contact the developer and politely suggest that they learn how to write programs properly for Mac OS X.

  • How do I export photos taken in an Iphone or Ipad Camera app and retain each of the photos location data?

    I know this question must have been answered somewhere but I must not be searching for the right terms because I haven't been able to find clear instructions. I am using iPhones (4s) and iPadminis on IOS 8/8.1. I run ITunes on a Windows PC.
    I want to be able to export photos which keep their metadata/exif data, including the location data that is acquired when the photo is taken. I have location services turned on for the Camera app. When I view the photos in the Photos app it appears to have kept some location services because it accurately identifies the place the photo was taken. How do I export these photos so they retain that location information?
    I have previously exported the photos by using the iphone and ipad as an external hardrive and just copied the files off the devices. When I open these photos in windows explorer they do not appear to have maintained more than the time the photo was taken. They do not show any location information in third party software like Picasa or Geosetter (My previous experience has been exporting images from a non apple camera and then syncing it with a handheld gps to update the exif data). I don't find syncing photos through Itunes very intuitive.
    What are my options? What are the solutions? If you have a solution can you please explain a little about what is happening to the files and the metadata/exif data at each stage of the process.
    Many thanks,
    Clare

    Export the project to iTunes
    Copy the project file to your computer
    Rename <File>.IMovieMobile as <File>.zip
    Extract the contents of the .zip file
    Your photos and clips will be in the Assets folder
    tt2

  • Was looking at app and its stuck on the page wont move help

    can someone please help im desperate was looking at a game on the apps download and its stuck on the page cannot get it to move even tried downloading it and still wont go away

    iOS Reset -
    Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

  • HP xw8600 workstation fans run at max all the time after upgrading CPUs and memory

    Hello, This is my 1st post on the forums here so I would like to thank everyone for the help ahead of time. I have an HP xw8600 workstation on which I have upgraded the CPUs and RAM recently - after the upgrade the fans seem to spin at full speed all the time (not just under load). Before the upgrading the fans were barely heard but afterwords the workstation has become very loud. This seems odd that the fans always run fast now and seems like this is not "normal" - what needs to be done to allow the fans to again be modulated by load/temp settings as designed? I looked in the temp and fan RPM settings in the BIOS and it looks like all sensors are working (including ambient temp sensor - was stating around 20 deg. C). Hardware changes:Before - CPU: 2x Intel Xeon X5460/ 3.16 GHz, 12MB L2, 1333 MHz, FSB,120WRAM: HP 32GB (16x2GB) DDR2-667 ECC FBD RAM - using RAM riser After -CPU: 2x Intel Xeon X5492/ 3.40 GHz, 12MB L2, 1600 MHz, FSB,150WRAM: HP 32GB (8x4GB) DDR2-800 ECC FBD RAM - using RAM riser NOTE: From the HP spec sheet it says that 32GB(8x4GB) is not supported by 5492... I am not sure why this is so and do not know if this has anything to do with my fans running very fast. HP 32GB(8x4GB)DDR2-800 ECC FBD RAM RISER Supported ONLY w/dual processors
    5272, 5472, 5482 HP 64GB (16x4GB) DDR2-800 ECC FBD RAM Supported ONLY w/dual processors
    5272, 5472, 5482 and 5492.
    Acoustics waiver required. Other than the constantly loud fans the workstation works perfectly with the new setup. Please let me know if anyone has run into this issue with the fast fans and whether there is a fix for this (maybe flashing BIOS?). Any advice is greatly appreciated! [I originally posted this under Desktops section - http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-xw8600-workstation-fans-run-at-max-all-the-time-after/td-p/3929746]

    The xw8600 has a motherboard firmware setting that if it detects high powered processors in place it wants to see the "double tall" performance heatsink/double fans per heatsink in place.  I have posted about that and how I rewired a double tall to use side by side in my xw8400 next to a single tall heatsink/fan to see how cooling was affected in that workstation. The xw8400 did not ever come with double tall performance heatsinks, to my knowledge, so its motherboard's firmware is different. In those posts I also explained how to do a simple jumper wire modification on a single tall heatsink to spoof the xw8600 into thinking it had a double tall/two fans in place over each processor.  Simple and quick. So, you might want to get a couple of double talls off eBay, or try the jumper wire trick.  I'd personally advise to get the double tall heatsinks given that you're running 150W max TDP processors.  If I remember correctly HP wanted you to use the double talls for 120W max TDP and above.  I'd feel comfortable using that trick on a set of 120 watt processors if I was not hammering them frequently, but it sounds like you're a high level power user. The all-fans-on-high can be due to a failed thermisitor in the front power cable reading ambient air temps too high, but you can check that in BIOS to see the temp and it sounds like yours is not elevated incorrectly.  You can search for my experience with that in a xw6600, and it is an easy $8.00-$12.00 fix with a new cable off eBay.  You'd want the longer version for the xw8600, versus the shorter one for the xw6600. Finally, maybe you've just gone too high in your total wattage use?  Those risers can run hot and draw lots of power.  Could you live with less ram and get rid of the risers using 4GB sticks?  Sometimes those prior prohibitions regarding what is and is not supported go away with later BIOS updates.  Is your BIOS the latest? Welcome, and let us know what turns out to be the problem so others can benefit too. Scott  

  • HI. I have forgotten my backup password and im almost all the way through upgrading to ios5 and icloud. ive had three guesses.. scared to have four. Can anyone tellme what to do? i think it is too far in to press cancel!

    Hi, I hope I can find a bright young person here. I have forgotten my backup password and i'm almost all the way through upgrading to ios5 and icloud. ive had three guesses.. scared to have four. Can anyone tellme what to do? i think it is too far in to press cancel!

    No one can help you with that. You will have to remember it or you won't be able to activate the device, sorry.
    https://www.apple.com/support/icloud/account/

  • How can I restore an app and its data from an old ipad to a new ipad without restoring from backup?

    When I purachsed and iPad 2 to replace my old iPad I did not want to restore it from backup for obvious reasons.  However, there are apps that have data stored in them that I have lost the data for, what can I do to get the app and data back on the new iPad without losing the data that was already in the app?

    griffaroo wrote:
    When I purachsed and iPad 2 to replace my old iPad I did not want to restore it from backup for obvious reasons. 
    The reasons may be obvious to you, but it makes no sense to me. I would think that you would want all of the content that you had transfered onto your new iPad.
    However, there are apps that have data stored in them that I have lost the data for, what can I do to get the app and data back on the new iPad without losing the data that was already in the app?
    If you lost the data in the apps, you can't get it back unless you restore from a backup - assuming that the backup DID have that data in the apps..
    The only way that you can get the apps PLUS the app data onto the new iPad is to restore the new iPad from a backup of the original iPad and sync the apps back onto the new iPad if necessary.

  • HT1766 How do I restore just one app and its data to a new device without overwriting what is already on the device?

    I have an iphone and a New ipad. When I set up my ipad, I had already had my iphone backed up on iCloud. I didn't however, use the backup to set up the iPad, so some of the apps don't have the same data on both devices. This is mostly fine with me. I was able to sync my games so that I can play the games on both devices and not lose any data or progress in the game. There is only one game that I haven't been able to get onto the ipad with the progress that I have made, even though it's been backed up on the iCloud. Now both devices are being backed up on the iCloud. Some information is shared between them, some not. I have no idea why it's arbitrary which info is shared. But I would like to get the one game (and perhaps a few other apps) to sync between the devices. Is there a way to do this by targeting specific apps and their respective data?

    The game that we are playing is called Swordigo ... A Zelda type game just FYI. When I installed the app I went into the Settings>Swordigo>sync saves to iCloud>On. That set it up to sync up to three different saves in iCloud because that is what this game offers.
    Then my daughter downloaded the app to her iPad ( the original one that I gave her when I upgraded to the new one). We share an Apple ID for purchases.
    When either of us launches the game on our iPads - the option to start from either save is already available in the game. The game supports this. Not all games will support it but you make it sound like your game does sync saves to iCloud.
    There is a difference between saving data to iCloud and syncing game saves. The beauty of the syncing of saves is that I could download this game to my iPod touch as well and still pick up my "saved" game from iCloud,

  • TS1702 Numbers keeps copying saved documents randomly and saves them to my Numbers desktop on my ipad.  They are greyed out and you cannot open them but the original I can open and its happening all the time to eery document

    I have numbers on my ipad 2, I have saved documents I have created in a folder so far so good.  For some odd reason when I open Numbers before I anything it autocopies every single document saved, and there are about 50 documents.  When it saves them the Numbers Icon is greyed out, the originals are still in colour.  I can open the originals but cannot open the copies which I have to delete every single time.  What is happening?

    Try a reset: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • Created and modified dates all the same

    Clock is displaying the correct time but for all types of files the created and modified dates are all displaying the one date. Any suggestions?

    Thanks for your input.  I want to keep the files with a 1 or ~1 as it happens and delete the rest.  I have written some scripts.  I think I could write a script to delete all files with a 1, but of course that is not what I want.  I guess
    I need a script to delete all files except if they contain a 1.  I haven't used a forum since way back in the PC mag days.
    Whoops..........I just realized exactly what you were telling me and used your suggestion.  I guess I was trying to do more work than I needed.  I searched for all files with a 1 in the folder and then moved them to a different folder.  Then
    I deleted the rest.  Job done.  Thanks for the help.

  • Fan runs all the time after upgrade to 10.4

    Upgraded to 10.4 about a week ago and now the fan runs all the time. I lowered the processor to reduced performance because the fan noise was very loud. Doing this lowered the fan speed but did not stop it. Memory usage is not a problem, shows 75% free.
    Before 10.4 was using 10.3 fan ran at times but never all the time.
    Any ideas.

    Tom, have you down loaded an app like "X Resource Graph", I think I got it at VersionTracker, which will tell you what fan is running at high enoug rpm's to generate noise. Plus it will give you cpu usage and temps plus hard drive temps. If its the cpu fan and the cpu is really working, go to the Activity Monitor in the utilities file and see what app is causing the problem. I don't know what to do if it's the hard drive or system fan. My system fan rarely goes over 1800 rpm, my hard drive stays between 2000 and 2200 but my cpu fan will accelerate when its under pressure to to over 3000 rpm. I just start hearing the cpu fan when it gets to 2400 rpm.

  • Where are all the photos after import?

    I don't know where to begin. iPhoto has gotten worse and worse over the years, but unfortunately I have tens of thousands of photos in it going back decades.
    The tipping point for me was after photo streams and extra syncing was added to iOS 5. After importing to iPhoto I simply don't know where all my photos are anymore.
    The import process itself is all funny. Sometimes it seems to just import the photo stream - which doesn't include videos.
    Sometimes it will import everything if I press Import again, but the numbers don't match the numbers of photos on my iPhone.
    If I check latest import it doesn't match what was just imported.
    If I select to delete photos on my iPhone after import it deletes some but not all of them.
    I don't have any confidence anymore that the photos imported. And organizing them - forget about it. It's the worse mess I've ever seen. I can't find anything anymore.
    It definitely doesn't "just work."
    I would like to clear out the photos on my iPhone 4 because the camera has gotten slow and I read somewhere that having too many photos in the camera roll can slow down the camera operation itself. Is that true? That would be sort of dumb if true because the only way of making albums directly on your iPhone is to leave the original photos in the camera roll.
    Is there anything better than iPhone I can use to organize all my photos?
    Thanks,
    doug

    Well, I do like that Photostream syncs between my iPhone and iPad. What I don't understand is why the import into iPhone seems to sometimes have just Photostream events and then separately events sorted by date, but without the items that were imported into Photostream events.
    Rather than turn off Photostream altogether, what would be nice is if I could just turn it off in iWeb. Is that possible?
    I'm sorry my "finding and organizing" complaint sounds vague. It's hard to explain clearly because everything is so convoluted in iPhoto now.
    Basically, it used to be that
    (1) I could import and everything would be broken up into events by date;
    (2) I could delete from my iPhone after import and everything would be deleted.
    But (1) is not happening reliably. And neither is (2).
    I just want to be able to organize my photos and find them. Even finding them in the current version of iPhoto got harder than it was in the previous version of iPhoto. It's just become a really confusing mess of a piece of software to use.
    Right now the immediate problem, to attempt to be clearer, is that my imported photos and movies are not broken down by date-delimited events. The problem seems to be related to Photostream imports which confuse the normal event grouping process.
    Thanks,
    doug

Maybe you are looking for