Lost my drivers because deleting hard-drive

I deleted my hard drive because of a virus, I did not save any drivers, most important my intel wireless driver I think, I can not connect wirelessly to the internet. can you help without it costing me any money

Hello Dan Curry,
Do you lose all the drivers? How about the SD card reader, wired network driver and Bluetooth?
If you lose all of them, we will need to download the drivers from the manufacturer website in another computer, and then transfer them to this computer by USB drive.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

HT201250 I want to use Time Machine to back up my pictures because my hard drive is full but I'm wondering if once I back up the pictures then delete them will time machine delete them off the back up too?

I want to use Time Machine to back up my pictures because my hard drive is full but I'm wondering if once I back up the pictures then delete them will time machine delete them off the back up too?

Evetually yes.
If your pictures have been in the same location (same folder, same subfolder, ...) for more than a week, then copies if them will remain in your TM backups until it fills up. They are then vulnerable to being deleted.
If they've been there for less than a week, TM could delete them as early as a month from now. If they've been there for only a few hours, chances are TM will delete them tomorrow.
This is why TM is not the best tool to use to archive data that you will be deleting from your main hard drive. Copy them to a dedicated external drive, or burn DVDs.

Your firmware can not be updated because the hard drive...SMC 1.3

Hi all !
I have a problem. I'm have a macbook pro Santa Rosa =
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.27f1
This morning I saw the update for the SMC firmware (1.3).
Before restarting, I have this error :
http://img411.imageshack.us/img411/6606/26048579.jpg
Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partiton or RAID scheme.
When I went into Disk Utility in order to check, here is what I have =
Name : FUJITSU MHY2200BH Media
Type : Disk
Partition Map Scheme : GUID Partition Table
Disk Identifier : disk0
Media Name : FUJITSU MHY2200BH Media
Media Type : Generic
Connection Bus : Serial ATA 2
Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : No
Location : Internal
Total Capacity : 186.3 GB (200,049,647,616 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 0
I thought Boot Camp could be involved becauseI know it's the only thing related to the EFI.
I searched on internet, and Ifound nothing. There was a solution in order to reset the partition table, but the tool is no longer available. The link on on the application explains that I have to reformat my macbook pro. I find a bit weird to make this , I can't spend hours for backup / restore just because the SMC update does not work. have you any lead for me ?
Thanks ,
Razique

Have you tried this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine. Do I have to wait for Seagate to update their drivers for this hard drive?

Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine. Do I have to wait for Seagate to update their drivers for this hard drive?

I tried your suggestion, and it's been giving me the message "Preparing for Backup" for the past 8 hours. Does this mean TM is backing up my hard drive? I'll give it a few more hours, but if nothing else happens, I'm not sure what else to do. I'm not sure if there are any new external hard drives that are compatible with ML yet.

Unable to download e-books after PC upgrade. I recently upgraded my laptop to one from the same vendor so all I had to do was to upgrade a few drivers on the hard drive. Unfortunately my copy of ADE is not so cooperative. Every time I try to download a

I recently upgraded my laptop to one from the same vendor so all I had to do was to upgrade a few drivers on the hard drive. Unfortunately my copy of ADE is not so cooperative. Every time I try to download an e-book I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12". Uninstalling ADE (all three versions) along with cleaning the registry does not clear the error. And I cannot de-authorize and reauthorize my new laptop as the de-authorize option is greyed out. Anyone else encounter this issue?

Problem solved finally. Used regedit.
https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html

I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?

I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?

Your images are truly no longer present on the hard drive(s)? Have you had your operating system do a search for them?
If such a search fails to find them, here's what I would do, in order
Look in the trash can/recycle bin
Restore from backups
If you don't have backups ... well, why not? ... find a program on the internet called an "undelete utility" (free versons are available) and then download and install it and run it. If you are going to do this, then do not perform any other tasks on your computer except find the program, download it (if possible to a different drive than the photos were stored on), install it (if possible to a different drive than the photos were stored on), and run it. In the future, you will need to commit to making regular backups of your photos and of your Lightroom catalog file, no excuses.
If that doesn't work, but the thumbnails still appear in Lightroom, you can probably recover the thumbnails from Lightroom via a plug-in, but these would be low-resolution versions of your photos, if you really need instructions on this step, write back

Somehow I lost Disk Utilities on my hard drive (OSX10.9.5) how do I get another copy

Somehow I lost Disk Utilities on my hard drive, Ive searched and it just doesn't exist anywhere. (OSX10.9.5) how do I get another copy?

Thanks Neil. No, of course there was no backup to restore from, but the Command + R worked like a charm (after a mirror backup, just in case) .
I had totally forgotten the Command R trick. I've only had Macs since 1984, so I'm sort of newbie here ;-) Just a brain **** from an old man.
Again thanks!
ch2co

I lost about 30 gigs of hard-drive space from ScreenFlow, how do I get it back?

I shut down the computer, and opened up screenflow and exited it. However the 30 gigs is still missing. I got an error saying out of space while I was recording a webcam and now the 30 gigs is gone. I only have 5 gigs of hd space left on my computer when it should be closer to 35 gigs left. I ran cleanmymac but that didn't find the missing hard-drive space.

First, get rid of "CleanMyMac," which is a scam. The developer's instructions don't completely remove it. Follow those instructions, then do as below.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Repeat with this line:
/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent
Restart the computer and empty the Trash. Never again install "CleanMyMac" or anything like it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Then look up in the "ScreenFlow" documentation where the applications saves files, and delete the files.

"revert" deleted hard drive name in disk utility HELP!!

I booted my wifes macbook pro 10.4.11 in target mode and connected it to my computer, macbook pro 10.5.6 and went into my disk utility to create a partition in the other computer. I used my disk utility from 10.5.6 because for some reason it got erased from the 10.4.11
so I started to do 2 partitions. It said there was not enough room so I clicked on "revert" and for some reason the name of the "macintosh hd" disappeared and I ejected the computer in target mode. Then when I tried to start it up, it just kept flashing a folder with a question mark. I booted again in target mode but still no "indented" "macintosh hd". it seems like it came unmounted maybe?
I have tried starting from x key, resetting pram, trying to load from install disc (which gets to the point where it asks where to install the OS and no HD shows up to choose) and even taking it to the apple store where they said the HD is damaged and/or corrupt. Before trying to reclaim the files, if I can, I wanted to see if anyone had this same issue and if it was solvable. I cant believe that I hit "revert" and it erased my hard drive name and it automatically made my HD corrupt or damaged?
PLEASE help anyone!
or if this is a lost cause, is there a good file recovery program where I can get my WIFES files back! Yeah, I am in trouble.
Thanks!

If anything can be recovered at all, you should quit using the computer asap. The more you use it the more OSX will write over those spots where the files were.
Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
Or FileSalvage...
http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
to recover what you can.
BUT, you'll need that other Mac with this one in FW Target Mode
BTW, don't use Leopards Disk Utility to do anything to a Tiger Hard Drive.

Lost iTunes in reformat of hard drive

How do I upgrade my iPhone 4 to iOS 5 without losing everything on my iPhone? I had to reformat the hard drive in my computer due to problems with my OS and lost the iTunes loaded with all that information like playlists, music, photos, apps etc.
Basically, I want to get iTunes to accept all that information so that I can restore the new iTunes to the way it was before I lost it. Then I can install iOS5.
I used the backup function by right-clicking on my iPhone icon, but am not sure if it backed up everything so I am holding off on doing anything else until I can get some guidance.
Thank you to anyone who can provide relief. Worse comes to worse, I stick with IOS 4.3.3

it only took so long because i have a crappy internet connection i think it downloads basically the files from the recovery partition from online.
i lost the recovery partition by formatting my drive when restoring a time machine backup, and when that installation wouldn't let me past the login screen i restarted going into the internet recovery, it took around 1.5hrs to download the necessary files (~1mb connection ) and loaded straight into what looked like the recovery partition, now in order to partition my hard drive for windows(says i have a broken partition map, fixing that can only be done outside of the operating system).
hence i'm downloading lion as we speak from the appstore to keep on a usb stick
edit: also internet recovery when it's downloading shows just a spinning globe with a progress bar and a timer at the bottom, it also appears to not save the files it's downloaded, just caches them

I have a vaio vgn-fz140e i installed a 1tb hard drive i am unable to update windows 7 i need drivers for my hard drive

Hi robman,
Welcome to Sony Community!
Thank you for this message. The model# VGN-FZ140E only supports Windows XP and Vista. We dont have driver updates available for other operating system as of yet.
Jen
If my post answers your question, please mark it as "Accept as Solution"

ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

HT203322 Cannot Install Mac OSX Snow Leopard on MacBook 10.5.8 because Mac Hard Drive has Time Machine on It?

I have an old MacBook (2006?) with OS 10.5.8 that I would like to upgrade to Mac OS X Snow Leopard, which I have on DVD. When asked to select what disk I would like to install the upgrade to, my only option is the Mac Hard Drive icon with a big yellow triangle/exclamation point saying I cannot install there because I am running Time Machine on that disk.
I have run searches using "Find" for any vestige of Time Machine left on my computer. I have deleted the icon from my dock. I have tried to run disk utility to delete just the Time Machine but can't target just that. I have rebooted after each of these steps. Nothing changes.
It is Kafka-esque because I need to upgrade my OS so that I can upgrade my browser so I can read the question section of apple.com related to upgrading to Snow Leopard.
Thanks for any help you can give.

Thanks, seventy one. I do have everything backed up everything to an external hard drive, plus the most important stuff also on Dropbox. Given the age of this laptop, and given that I've been the sole owner and almost the sole user, I'm mystified as to why/how Time Machine is on my internal hard drive. I agree with you that it would defeat its purpose to back up files to the computer they're already on! It reminds me of the time a friend of mine put a bucket under his sink because there was a big leak in the pipe that was splashing into the cupboard. When the bucket was full, he took it out from under the sink and poured it down the sink to empty it. Ooops. Using Time Machine to back up files on the same computer it's installed on feels the same to me.
It's interesting because I've found versions of my question posted by many other users, but I can't find an adequate response. Mostly, there are responses that don't directly address the problem, which in turn are rated by the petitioners as 50% or so helpful.
I'm not sure what I'll do beyond searching a little more on the web and sleeping on it. In all seriousness, though, thank you for your help and suggestions. These Apple Help Boards are amazing, in large part owing to people like you who respond to strange plaints like my own.

Can I delete hard drive and still preserve 'recovery partition'?

Hi!
I would like to delete the hard drive on my Toshiba Satellite laptop because I don't like the new Windows 7
operating system. I'm thinking of putting on the Windows XP OS since it's not as 'bloated' as the new OS.
However, I'm concerned that I might also lose the 'recovery partition' that has the factory settings. Do I
have anything to be concerned about? Thanks!

For Sure!!
If you want to replace 7 with new XP, then you can while keeping the factory settings recovery partition by following these simple steps:
1) First of all, you should place all your important files and document to any secure place to not face the data loss conditions.
2) Restart Computer and press F8 key until the boot option appears on-screen.
3)Chose any visible system recovery or repair options from the list of menus appear after pressing the F8 Key.
4)After that, you could see an option named "System Recovery option screen" and then click "restore application".
5)Follow the guidelines, and when prompted click on "Full factory settings" option.
6)After successfully performing all the tasks, you will see the new window whatever you wish with full factory settings configuration.

Reinstalling drivers for external hard drives

Seagate support rep says that I need to reinstall the drivers. He thinks they may have been corrupted.
How can I do this? Do I have to reinstall all system software from CD & them all updates?

Only by reinstalling OS X from scratch or by doing the following. Why did they tell you the drivers needed to be reinstalled?
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

How to Delete hard drive on a crashed computer?

How can I delete the hard drive on an old MacBook Pro so I can take it to ewaste for disposal - when the computer no longer opens/loads?
Or is it safe to discard even if I wasnt able to delete the hard drive?

It would need to have the drive removed and physicaly destroyed. Go to this link and find the MacBook Pro you have and see if you can remove it yourself. If not then maybe a friend could help.
http://www.ifixit.com/Device/MacBook_Pro

Lost my drivers because deleting hard-drive

Similar Messages

Maybe you are looking for