Lost my favorite language after upgrading the firm...

After upgrading my nokia 6500 firmware to V 08.30, I've lost french in my phone settings.
Does someone can help me?
Solved!
Go to Solution.

please check the following:
/discussions/board/message?board.id=swupdate&thread.id=29982
Fear not those who argue but those who dodge

Similar Messages

  • I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?

    I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?

    Look above at my original post:
    Downgrade Mavericks to Snow Leopard
      1. Boot from your Snow Leopard Installer Disc. After the installer
          loads select your language and click on the Continue
          button. When the menu bar appears select Disk Utility from the
          Utilities menu.
      2. After DU loads select your hard drive (this is the entry with the
          mfgr.'s ID and size) from the left side list. Note the SMART status
          of the drive in DU's status area.  If it does not say "Verified" then
          the drive is failing or has failed and will need replacing.  SMART
          info will not be reported  on external drives. Otherwise, click on
          the Partition tab in the DU main window.
      3. Under the Volume Scheme heading set the number of partitions
          from the drop down menu to one. Set the format type to Mac OS
          Extended (Journaled.) Click on the Options button, set the
          partition scheme to GUID then click on the OK button. Click on
          the Partition button and wait until the process has completed.
      4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
    If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

  • Lost music from iTunes after upgrading MacBookPro to OS X Yosemite

    Lost music from iTunes after upgrading MacBookPro to OS X Yosemite. Has anyone had this problem? How did you re-import all your lost music? My iTunes currently only contains all of the music I have purchased from the iTunes Store but nothing that was burned to my iTunes. All of my music files still seem to be located on my hard drive within the iTunes folder but they did not re-import into the library during the upgrade to Yosemite. Thanx for your help.

    Hi OrangeOAK,
    Thanks for the question. If I understand correctly, you still have the music on the computer but need to re add it to iTunes. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Adding music and other content to iTunes - Apple Support
    Adding content on your computer to iTunes
    iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
    Open iTunes
    From the File menu, choose one of the following choices:
    MacAdd to Library
    Windows
    Add File to Library
    Add Folder to Library
    Navigate to and select the file or folder that you want to add
    If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • After upgrading the new operating system, it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select

    After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?

    Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
    As expected, cdm-git also works fine since DMs only work in the root mode as of now.
    Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
    Last edited by looki (2014-08-23 13:04:49)

  • Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between in one of the outside  interface
    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between the session at one of the  interface but working fine with another interface,
    i have outside  and backup interface which work on internet failover when internet  routed through backup interface the issue getting started but working  fine if traffic is going via outsid

    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between in one of the outside  interface
    i  am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI  remote session getting disconnect in between the session at one of the  interface but working fine with another interface,
    i have outside  and backup interface which work on internet failover when internet  routed through backup interface the issue getting started but working  fine if traffic is going via outsid

  • Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

    why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
    The current bios version is F.07

    korpx,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • CS5 can't preview the fonts image after upgrade the OS X 10.10.1

    My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
    Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

    Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

  • Automation error element not found in vb6 2147319765 after upgrading the os

    Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
    message even after I ran the application in XP compatability mode.
    The application is using data from other servers and all the servers are windows server 2003.
    muneer

    Double post:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
    This forum is about VB.Net. If your question is about a VB6 project, have a look here:
    Where to post your VB 6 questions
    Armin

  • After upgrade the ipad2 to ios 5, my pages files in my ipad is missing? How can get back?

    After upgrade the ipad2 to ios 5, my pages files in my ipad is missing? How can get back?

    azwanelias wrote:
    my iphone 5s is jammed after downloading IOS 8.0.2 and now i cant use my iphone and it has the sing of itubes in RED which is wired how can i get my phone to work? and its not letting me restore on itunes of my PC
    I don't really understand your comment about "sing of tubes in RED which is wired". But if you are referring to the display of iTunes and the USB port that is an indication that you must restore your iPhone by connecting it to your computer via USB and then using iTunes on the computer to restore it.

  • Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    There is an explanation in the following link in the section "What's new in version 3.0.09440" that there was a problem with the update. It's available again now. https://itunes.apple.com/us/app/cisco-anyconnect/id392790924?mt=8

  • Has anyone else lost their scroll bars after downloading the newest version of IOS?

    Has anyone else lost their scroll bars after downloading the newest version of IOS?

    What does the iPhone/iPad OS have to do with Mavericks?
    Mavericks does remove the scroll bars as they are not needed, but you can set them to show always in the General System Prefs.

  • Pmessenger kick me out ! even after upgrade the frimware to 5.1.1 !

    Pmessenger kick me out ! even after upgrade the frimware to 5.1.1 !
    i deleted many times and reinstall
    it kick me out when making retrieving the contacts
    but when i close WI-FI the Pmessanger didn't kick me out !
    is it from connection or what ?
    any one face this problem ? and solved ?

    Hello, rohan.kishore.patel. 
    Thank you for visiting Apple Support Communities.
    Battery life can be difficult to troubleshoot as multiple factors contribute to how long a charge can last.  Graphic intensive applications, display brightness and data connectivity are just a few of the items that can cause the battery life to decrease rapidly.  I would need to know a little more information about your usage patterns to give you and idea on how to maximize battery life.  However, here are some tips on how to adjust settings and charge the device that may help.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/ht1476
    About Batteries
    About iPhone Batteries
    If you feel that you need assistance with the battery concern, you can always reach out to us via the link below.
    Contact Apple
    Cheers,
    Jason H

  • After upgrade the background jobs

    Dear all,
    We are Upgrading the PRD server.after after upgrade the background job (user specific ) jobs are mannully started are atuomatically started.I check the job btctrns2.
    The user specfic jobs are not started.
    Kindly advise us to start automatically.
    regards
    guna

    Hello Guna,
    Please find below a link to Background Jobs related information
    (if click does not work, copy and paste it in your browser)
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/51/c0e07d569a11d189200000e8323d3a/frameset.htm
    I hope this is useful to you in your work
    Best Regards
    Sitaraman

  • After Upgrading the SOLMAN to SPS12 the SAP EWA generation to word fail!

    Hello,
    <p>
    after Upgrading the SOLMAN system to SPS12 the SAP Early WatchAlert generation to word fail. We use MS Word 2002 SP3!
    EarlyWatch Alert Report, EarlyWatch Alert Report with Graphics, all Service Level Reportings -
    No report can generate to a word report!
    the following Error message appears:
    <p>
    Information:
    Document generation failed
    <p>
    After confirming the information poopup, this Error message appears:
    <p>
    <p><b>Error: Exception  occurred (program: , include: , line: 0)., Program CL_DSMOP_HTML_SERVICE_OPEN====CP, Include CL_DSMOP_HTML_SERVICE_OPEN====CM00N, Row 103 </b></p>
    With SPS10 all generations were successfully!<p>
    Has anybody an idea?
    <p>
    Thanks a lot!
    <p>
    Regards,
    matthias isenburg

    Hello,
    This is a known problem in the meantime!!!
    We use MS Word 2002 SP3! This Version ist too old! The Templates which the Solman want to use are now in MS Word 2003 (minimum)!
    The solution is to upgrade MS Word!!!
    Best Regards,
    Matthias Isenburg

  • After upgrading the itunes, I can not find my ipad when it connects to the PC

    After upgrading the itunes, I can not find my ipad when it connects to the PC
    Before that, I can see an botton said my ipad. And then I can click it to operate my ipad

    Try this
    Go into the control panel. Add/remove programs. Uninstall iTunes, Apple mobile device service, apple application support. Then go out and redownload and reinstall iTunes and try again.
    There seems to be a glitch with a recent update and one way to overcome it is to just start over. If that doesn't work there are more in depth things you can do.

Maybe you are looking for