Lost my mobileme password how do i reset
lost my mobileme password how do i reset
Your MobileMe address is an Apple ID and you can reset its password at http://appleid.apple.com - however MobileMe itself closed last July. If you migrated your account to iCloud before August 1 you can sign in in System Preferences>iCloud with it (Lion 10.7.2 minimum required); if you didn't migrate the account you can open a new iCloud account the same way but you won't be able to retrieve emails and other data previously held on MobileMe.
Similar Messages
-
I lost my restrictions password and want to reset my ipod so i can put a new one on, when i try reset it it makes me put in my device password and restrictions password! How can i reset my ipod if i need the restrictions password which is why i am resetimg my. Ipod
Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog -
My old email account is disabled and I can't remember my itunes password - how can I reset my password or move $ to a new itunes/email account? It seems I must have mis-typed my account information because I can't answer the security questions correctly...
➡ https://iforgot.apple.com/
-
I deleted my old e-mail account associated with my iCloud, i need to reset both my ID and my password. however i don't remember that password. how can i reset it?
Hey Frankgates!
I have an article here that can tell you how to do this:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I don't have an encrypted code, I didn't use my vault file upon starting my computer and I didn't associate it to my apple ID. I bought a refurbished macbook pro (10.7.4), and now I forgot the administrator password. how can I reset that?
A bug has been filed: https://bugzilla.mozilla.org/show_bug.cgi?id=644566 .
-
I purchased an used macbook and I don't know the old owners password, how can I reset it?
Well, it is part of the Mac. So you were shortchanged.
Call AppleCare and ask them to send you a replacement set. They will ask for the serial number and model number to sure they are give you the correct set. They will charge you a nomibnal fee for shipping and handling.
Allan -
I forgot my administrator password, how can i reset it without losing any of my work?
MacBook5,1 version 10.6.8 (I had my laptop for 7 years, its an old model).For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password,
OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself
Reset OS X Password Without an OS X CD — Tech News and Analysis
How To Create A New Administrator Account - Hack Mac -
My daughter has forgotten her iPad password, how do i reset it?
My daughter has forgotten her iPad password, how do i reset it?
You can't reset a passcode. you have to restore the device and you want to sync to the computer that you always sync with if you want to restore all of the data and setting. If that computer is unavailable - you can use another computer - but you will have to erase the iPad completely and will not be able to recover your data.
See this for "how to restore"
You may have to restore using recovery mode -
My daughter has forgotten her password, how do I reset it?
My daughter has forgotton her password, how do I reset it?
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My daugters phone is disabled because she forgt her password, how do I reset it?
My daughters iPone 4 is disabled because she forgot her password, How do I reset it?
Read this:
iOS: Forgotten passcode or device disabled -
I have forgotten my password, how do i reset without wiping my ipad?
i have forgotten my password, how do i reset without having to wipe my ipad 1?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
my ipod touch locked after several attempts with the wrong password. how do i reset the password.
If it's showing the disabled screen due to too many incorrect passcode attempts then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPod and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPod into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
My daughter forgot her screen password, how do I reset?
My daughter has forgotten her screen password, how do I reset?
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hello, I have a Mac Book Pro mid 2012, and forgot password, how do I reset it without losing info? I certainly dont want it to be reseted by apple with my info from work, thank you very much for further response.
First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
I am trying to update my adobe flash player and I am having problems logging on as I cannot remember my password…how do I reset that password
OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.
Maybe you are looking for
-
Major tree and display issue.........
Hi guys! I am having a problem whereby when I click on a tree node(Folder), I want all the images contained in that folder to be displayed on a JPanel which I created. By the way, the tree and panel are added to a splitpane. Tree on the right, and pa
-
Hi Girus, When I m tring to run the payroll for Canada I m getting following error. Business number not found Check account and registration number configuration from 1.01.2010 31.01.2010 I m maintaining 0461,0462,0463,0464 tax infotype for canada. P
-
IWeb site saves AND publishes, without the option to publish or not
I cannot make any changes, and save them, unless I want the page published on this site: http://web.mac.com/joneve/ThePeregrine_Muse/Whoshere.html On another site I can save changes I make and then I'm prompted to choose publish or don't publish the
-
CS6 cant save the printer driver settings
The problem is similar to this http://forums.adobe.com/message/4431235#4431235 Illustrator simply does not save any of the settings in the driver tabs (such as custom print sizes, paper tipe, source tray etc) unless I hit the Print button (e.g. I can
-
Sp Transaction Procedure For Purchase Order Item Checking
Hello All, I need to create a sp_Transaction notification for Purchase Order where system will check that the document to be added with Vendor 'A' and ItemCode 'ERT' should not be be previously added for the same vendor 'A. Example:- Doc No. Vendor