Lost my OS Cd for MAC Mini how can i get a replacement CD
I have lost the Mac Mini Cd which came with the box , I need to re install my MAC OS,
the Apple Phone support aint letttine me through ,
Is there anyone i can mail on Apple to get it done,
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
Similar Messages
-
I have lost the export settings for FCP7. How can I get these back?
I accidentally threw a folder in the trash. I got a lot of stuff back using Data Rescue, but not everything.
I have lost the export settings for FCP7. How and Can I get these back? tiaSorry for the delay in response. It sounds like you have somehow deleted your quicktime ProKit with the codecs by what ever process you were trying to restore you trashed files.
Go to the Apple Menu > System Updates and see if the updater sees a need to install them.
If this doesn't work - it might be
the best thing to do would be to get FCS Remover from Digital Rebellion (free)
http://www.digitalrebellion.com/fcsremover/
and try to remove all traces of your corrupt installation and then do a clean install from your original disks, followed by updates to restore the new ProKit codecs.
If your system has been corrupted by whatever you did, it might be best to wipe the drive and start from scratch - but understood this is not a pleasant choice.
Other posters may have different or better suggestions. The FCS Pro Apps require a lot of files and file structure that may or may not be apparent, and were never drag and drop installable. They always needed to be installed with the proper installer.
MtD -
I have Photoshop CS5 for Mac. How can I get my epson scanner to import?
Why can't I download TWAIN to my CS5Photoshop for Mac?
If you need Photoshop CS5 in 64 bit mode to access ram over 4GB, Adobe has good advice.
TWAIN plug-in | Photoshop CS4, CS5, CS6
I like the Vuescan recommendation. They provide their own 64 bit Twain plugin. It's great if you can afford the paid solution.
You can try before you buy: www.hamrick.com
I don't use Twain often, it does put Photoshop on hold until the scan is finished.
Gene -
My hard drive failed, lost all my software for CS6. How can I get it back?
Last year I purchsed CS6 in the form of CDs from the University of California Polytechnic in San Luis Obispo.
I installed them on my MacBook Pro.
I transferred colleges to the University of Wisconsin Stout.
Last week my hard drive corrupted and I lost all my Creative Suite software.
I doubt that I have my product code or CDs anymore (just lost in the travel).
Is there a way I that I can be given a download from Adobe to get my software back?
I've already paid for it once, and even with my student discount it was not cheap!
Thanks.Download CS6 products
Mylenium -
My 1st ipod was lost. My library is on a Dell with Windows. I registered my new ipod to a Mac. How can I get my library from Windows onto my new Ipod?
Thank you for your help. I am still having trouble. As you can tell, I am not technologically advanced AT ALL. My music is all showing up in the library but when I go to file in the top left corner, Sync is greyed out and I cannot select it. I'm gonna continue to try this. It's been a long time since I had my 1st ipod and things have changed so much I will probably need to research this stuff. Thanks again for your help.
-
my iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?
If you don't have a backup then the only possible solution is to go back to the store and see if they can get your old phone and create a backup of that. I know very often that Apple employees will wipe the returned iPhones clean before shipping them back to wherever they ship them.
When you say your old phone was "broken" does this mean it is dead and won't turn on?
Do you have a Time Machine backup of your computer, or a clone that might have this info on it?
Other than that I hate to say you may be out of luck. Time Machine and/or a cloning program performed regularily will inevitably save your a** in situations like this.
Good luck
PM -
I just purchased a MacBookPro after having a MacBook. I have ILife, IWorks and Office for Mac. How do I get those programs on to my MacBook Pro? I will still use my MacBook at work so I need those programs to remain on it as well.
You need a Firewire cable to run between the two Macs. Using Utility>Migration Assistant running on your new MacBook Pro, transfer what you want (with all the preferences and such) from your MacBook to your MBP. Here's more info from Apple.
You might have an issue with the Serial number for Office, but hopefully you have that around.
Hope this helps. -
I synced my iphone too my laptop and got all my husbands info and lost mine how can I get my info back off this laptop.
hi marie i take you have got your own apple registration, if not you need toregister under your own name & password, if you have then it does sound like you've just plugged it in under your husbands name. lori :-)
-
Hello forum,
Hopefully a simple question. My father-in-law passed recently, leaving behind an unopened copy of CS 5.5 Master Collection Student and Teacher Edition for Macs. How can I find out if he registered this software without opening it? After finding out how much this software runs, I'd like to sell or return it if possible to give the money to my mother-in-law for funeral costs.
Thank you,
BichonfreezeMylenium,
Thanks for the quick response!
Thats a shame that it can't be used. Are you sure I couldn't donate the software to a university or school? It just seems like a big waste for something so expensive.
Bichonfreeze -
I have lost the iCloud program from my Mac. How can i get it back?
It think i must have deleted it? It is no longer under the system choises.
Does anyone know how i can get it back?
I am updating to OS X Mountain Lion now, but i don`t know if that will fix the problem?Did you actually remove iPhoto or just the shortcut in the Dock?
-
I have lost i photo from my mac. How can I restore it. I have no idea where it is now
I have lost i photo from my mac. How can I restore it. I have no idea how this happened
With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
have you tried double clicking on your iPhoto Library to see if it will open?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
what type of Mac?
how much free space on your boot drive? -
On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed
Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You -
Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive. (The problem is that Safari could not download the file "iTunesSetup.exe" because there is not enough free disk space.Try deleting documents or downloading to another drive) ... Perhaps this is the main problem why can not open iTunes and inscription is: the folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "Music" folder. - And after options ok, appears option: Choose iTunes Library with inscription iTunes needs a library to continue. You may choose an existing iTunes library or create a new one - but still following options Choose Library and the following options can not open iTunes ... Please for instructions on how to eliminate the problem or eror ...
Mac is running OS X v10.6.8, Safari should be 5.1.10. Or Mac OS X / Version 10.6.8 / Build 10K549 / Serial Number W8****ATM / Processor 2.4 GHz Intel Core 2 Duo / Memory 4 GB 1067 MHz DDR3 or More Info:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2,4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1,07 GHz
Boot ROM Version: MBP71.0039.B0B
SMC Version (system): 1.62f7
Serial Number (system): W80394HFATM
Hardware UUID: 94647506-C5D0-5D73-BC7F-FC680D238F43
Sudden Motion Sensor:
State: Enabled
<Personsl Information Edited by Host>buy an external HD 1TB for $60
NO notebook is a mass storage device, so dont try to turn it into one, it doesnt work that way.
Unless youre using it every couple weeks, its static data and should be on an external HD
In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation. -
My Mountain Lion app failed while downloading, and now I can't download it without repaying for it. How can I get my access code to work/download the app?
Welcome to Apple Support Communities
Open App Store, select Account in Quick Links and press Show hidden purchases. If OS X isn't there, http://www.apple.com/support/mac/app-store/contact -
I swapped my iphone from apple store india and my imei of iphone changed and i have lost the box and bill of phone , how can i get my old imei number.
Of course it changed. A phone's IMEI number is unique to each phone. The IMEI number for a phone does not transfer to another phone.
Since your iPhone was exchanged under warranty without having the box and bill for the original purchase, you don't need it now either. The exchange under warranty remains under the warranty for the original purchase.
Maybe you are looking for
-
HP Laserjet 1320 and OS 10.4.4
Ok, my print queue keeps stopping the job. I have downloaded the latest drivers, reset the print system, rebooted, restarted the printer, tried a different USB cable, even tried a different 1320 all to no avail. HELP! I'm about to pull my hair out.
-
Problem In App Integrator Iview
Hi All, I am connecting to a site using app integrator. I am able to login successfully and see the home page. But when i am clicking on any of the link, the link is not working and i am getting an error on the page message on the status bar. I check
-
Problems getting started with LabVIEW FPGA
Two (probably) related questions: 1. I am trying to get started with LabVIEW FPGA, and I am having trouble using a host VI to test my FPGA VI. I started with a basic QAM modulator VI, to be run on the FPGA, and I have reached the point where I need t
-
Problem updating to Belle without PC
Hi, I'm on Mac and as "http://www.nokia.com/softwareupdate" says I need to update from the device, but the phone tells me I can only update using PC Suite and don't let me do anything else. How do I do with this? Regards, Alexander Solved! Go to Solu
-
Regarding return message from custom transaction
Hello all, i have a scenario where i am calling a custom transaction and trying to get return messages, but i am not getting any return message instead i am getting error message in that transaction even if i am using mode 'N' in my call.