Lost my printer while trying to read Mac OS 10.4 install directions
So there I was - happily living and working with Mac OS 9.2.2 on my 450 Ghz G4 - and I decided it was finally time to upgrade to OS 10.4 Tiger for the new bells and whistles. After reading about other people's problems with upgrading I went to my local Mac shop and had a new 80 GB hard drive installed in drive position 3 to use as a backup for my files and as a backup in case my original, Apple installed drive ever went down the river. I bought OS 10 Tiger and opened it as instructed to read all the information staight from the horses mouth. I double clicked the "install" button as instructed and restarted my machine in order to bring up the read me files as instructed in the install booklet. I then quit the disk in order to digest all the information and do the backups recommended in the manual. I then noticed that my printer icon no longer showed up on the desktop ( printer is a HP 1220C which I've been using for 4 years.) When I now try to print anything from any program I get the error message" the file will be moved to the trash because no desktop printer exists for this spool file." I reinstalled the driver provided by Hewlett Packard but the printer icon still doesn't show up. I went to "chooser" and found the printer there and selected it as usual but it doesn't show up on the desktop and still won't print.
What did I do to screw this up? Is this a problem similar to "aborted system 10 installs" I've seen on this forum? How do I bring my printer icon back up onto the desktop? How do I determine if my dealer screwed something up since everything worked fine before they installed the new, backup internal drive? If I go ahead and install OS 10 Tiger anyway, will this bring my porinter back to life?
( The Hewlett Packard "printer utility" still works. I can still print a HP "test" page - but nothing else.) Was I nuts to even consider upgrading to Tiger? Should I have stayed with OS 9.2.2 in the first place? At least it worked.
Help a drowning man please.
Please don't cross-post without a good reason or at least referencing the other thread: see http://discussions.apple.com/message.jspa?messageID=3583500#3583500, you won't get an answer any sooner and it just confuses responders. Please delete this one and stick with the original.
Similar Messages
-
HT4946 I lost my notes while trying to refresh my youversion bible apps,how do I restore it
I lost my notes while trying to refresh on my youversion bible apps,how do I restore the notes
Hi hkblake, and a warm welcome to the forums!
I'd get EasyFind...
http://www.versiontracker.com/dyn/moreinfo/macosx/8707
Search for...
.pdf
See if you can locate them. -
LPX-00601: Invalid token in: err while trying to read data from xml
Hey ,
While trying to read data from xml i got err:
LPX-00601: Invalid token in: 'path'
the proc. i'm using to read data from the xml is:
procedure read_xml_file_test (in_filename in varchar2)
is
my_dir varchar2(20) := 'XML_DIR;
cur_emp2 number:=0;
l_bfile BFILE;
l_clob CLOB;
l_parser dbms_xmlparser.Parser;
l_doc dbms_xmldom.DOMDocument;
l_nl dbms_xmldom.DOMNodeList;
l_nl2 dbms_xmldom.DOMNodeList;
l_n dbms_xmldom.DOMNode;
l_n2 dbms_xmldom.DOMNode;
l_temp VARCHAR2(1000);
v_errors internet_clients.errors%type;
src_csid NUMBER := NLS_CHARSET_ID('UTF8');
dest_offset INTEGER := 1;
src_offset INTEGER := 1;
lang_context INTEGER := dbms_lob.default_lang_ctx;
warning INTEGER;
v_count number := 0; --total records
v_count_s number := 0; -- sucsess record
v_count_f number := 0; -- failed record
v_flag varchar2(1);
v_char2 varchar2(1);
v_l1 VARCHAR2(255);
v_l2 VARCHAR2(255);
v_l3 VARCHAR2(255);
v_l4 VARCHAR2(255);
v_l6 VARCHAR2(255);
BEGIN
l_bfile := BFileName(my_dir, in_filename);
dbms_lob.createtemporary(l_clob, cache=>FALSE);
dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);
dbms_lob.close(l_bfile);
-- make sure implicit date conversions are performed correctly
dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');
-- Create a parser.
l_parser := dbms_xmlparser.newParser;
-- Parse the document and create a new DOM document.
dbms_xmlparser.parseClob(l_parser, l_clob);
l_doc := dbms_xmlparser.getDocument(l_parser);
-- Free resources associated with the CLOB and Parser now they are no longer needed.
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
-- Get a list of all the nodes in the document using the XPATH syntax.
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
-- Loop through the list and create a new record in a tble collection
-- for each record.
FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
l_n := dbms_xmldom.item(l_nl, cur_emp);
cur_emp2:=0;
loop
v_count := v_count + 1;
begin
-- Use XPATH syntax to assign values to he elements of the collection.
dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
exception
when others then
null;
end;
exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
END LOOP;
end loop;
-- Free any resources associated with the document now it
-- is no longer needed.
dbms_xmldom.freeDocument(l_doc);
--remove file to another directory
--COMMIT; -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows" clause.
/*EXCEPTION
/*WHEN OTHERS THEN
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(l_doc);
null;
ROLLBACK; */
END;While trying to execute this i got:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
ORA-06512: at line 1
i guess i mised somthing at the line
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
<?xml version="1.0" encoding="UTF-8" ?>
- <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <GetFieldsNameResponse xmlns="http://tempuri.org/">
- <GetFieldsNameResult>
- <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
- <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
- <xs:complexType>
- <xs:choice minOccurs="0" maxOccurs="unbounded">
- <xs:element name="FRM_GANERIC_PROP">
- <xs:complexType>
- <xs:sequence>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
- <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
- <DataSet_FRM_GANERIC_PROP xmlns="">
- <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
<L1>val1</L1>
<L2>val2</L2>
<L3>val3</L3>
<L4>val4</L4>
<L6>val6</L6>
</FRM_GANERIC_PROP>
</DataSet_FRM_GANERIC_PROP>
</diffgr:diffgram>
</GetFieldsNameResult>
</GetFieldsNameResponse>
</soap:Body>
</soap:Envelope>I Guess it somthing that have to do with node definition ,
but i have tried so many combinations and none ot those worked for me.
i'm deeply stuck here.
What do i miss here?
THANKS yair
Edited by: yair_k on 02:30 14/10/2010Hey , after got a lot of success with the xml reading part , i wonder if you
can help me with a problem while trying to reading that xml from a web service.
i use a procedure as followes:
FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
RETURN CHAR
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_a_ns VARCHAR2(32767);
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return VARCHAR2(32767);
BEGIN
l_wsdl_url := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
l_namespace := 'http://tempuri.org/';
l_service_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
l_port_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_qname);
l_call := UTL_DBWS.create_call (
service_handle => l_service,
port_name => l_port_qname,
operation_name => l_operation_qname);
l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
<GetFieldsName xmlns="' || l_namespace || '">
<user>' || in_username || '</user>
<password>'|| in_password || '</password>
</GetFieldsName>');
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
dbms_output.put_line(l_return);
RETURN l_return;
END;but when i run it i got message:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
regarding the line:
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
So , i deeply stuck here!
my web service description is:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
- <s:element name="GetFieldsName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFieldsNameResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_ReadedResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="GetFieldsNameSoapIn">
<wsdl:part name="parameters" element="tns:GetFieldsName" />
</wsdl:message>
- <wsdl:message name="GetFieldsNameSoapOut">
<wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
</wsdl:message>
- <wsdl:portType name="ServiceGetpublisherTableSoap">
- <wsdl:operation name="GetFieldsName">
<wsdl:input message="tns:GetFieldsNameSoapIn" />
<wsdl:output message="tns:GetFieldsNameSoapOut" />
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
<wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
<wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ServiceGetpublisherTable">
- <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
<soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
<soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
hope you can help me with this.
regards
yair -
An error occured while trying to read data
Hi RoboHelpers,
While opening my main project today (large project w/ thousands of topics) my project froze twice and wasn't responding, so I forced it to close via Task Manager and deleted the CPD file, thinking it was the culprit.
I then got this error when I tried to reopen the .XJP file:
"An error occurred while trying to read data from
<D:\Hg\PcdmisQA\Pcdlrn\CoreHelp\13_hardware_topics\13_hardware_topics.fpj><1>."
I clicked OK to get past this error, and now my htms are not appearing inside the Topic List for 13_hardware_topics and the TOC links show that the topics don't exist. But the .htms do exist inside the actual directory in Windows.
I think I can fix this by importing the .htms inside 13_hardware_topics, but I'm not sure why it happened in the first place. Is there a way to just fix the .fjp file instead--if this is indeed the problem?
My 13_hardware_topics.fjp structure looks like this (sorry for the post length):
<?xml version="1.0" encoding="utf-8"?>
<rhpml majorversion="2" minorversion="0">
<folders/>
<topics>
<topic>
<name>Tool_ID.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Description.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Hardware.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Hardware_Introduction.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>List_of_Available_Tools.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Tool_Type.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Understanding_the_Probe_Utilities_dialog_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_trax_calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Probes.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Partial_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_File_Name.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>User_Defined_Calibration_Order_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Search_Override_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Optical.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Showing_an_Animated_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Using_the_Quick_Fixture_Dialog_Box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>print_list.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>example_printout.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Machines.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Deleting_the_LOADMACHINE_Command.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Ball.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Removing_the_Animated_Machine_from_the_Graphics_Display_Window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>collision_tolerance.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Optical_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Axes.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Setup.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>autocalibrate_probe.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Specifying_Collision_Tolerances.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Using_Existing_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_4_-_Begin_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_3_-_Define_Ports.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_8_-_Measuring_Port_2.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_6_-_Measuring_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_7_-_Measuring_Port_3.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Displaying_Existing_Machines_in_the_Graphics_Display_Window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_FCR25_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_and_Removing_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_the_No_Machine_Item.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Home_Position_area.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Deleting_the_Machine.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>defining_probe_changers.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Adding_Custom_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>add_tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>With_Averaging.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Shank_Optical_Vector_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Fast_Probe_Mode.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>X_Y_and_Z_Center.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Delete_Tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ScanRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>available_tip_types.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Thickness_of_the_ball_tip.htm</name>
<name>PrbRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Edit.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Shank_Vector_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>edit_probe_components.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Edit_Tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<name>To_delete_a_wrist_angle.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Setup.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Measure.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Disk_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>PrbRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Previewing_your_Probe_Configuration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_unit_calibration_data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>New_Angles_List_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>calibration_date_and_time.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Global_Used.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Individual_Angle_Data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Barrel_Shank_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>calibration_date_and_time.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Equally_Spaced_Angles_Data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Reset_Tips.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Disk_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_unit_calibration_data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>dmis_label.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>add_angles.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Notes_on_the_Add_Angle_option.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Working_with_the_Angle_Grid.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>available_tip_types.htm</name>
<name>calibration_date_and_time.htm</name>
<name>Results.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Reset_Tips.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Diameter_Length.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Previewing_your_Probe_Configuration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>User_Defined_Calibration_Order_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Wrist_Map_If_Available_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Diameter_Length.htm</name>
<name>Use_Wrist_Map_If_Available_check_box.htm</name>
<name>Probe_Description.htm</name>
<name>List_of_Available_Tools.htm</name>
<name>Probe_File_Name.htm</name>
<name>use_trax_calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_2_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Partial_Calibration.htm</name>
<name>Probe_Description.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>autocalibrate_probe.htm</name>
<name>Search_Override_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Disk.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_ACR1_Probe_Changer.htm</name>
<name>Step_1_-_Select_the_FCR25_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>example_printout.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>defining_probe_changers.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_CW43_Probe_Changer.htm</name>
<name>Optical.htm</name>
<name>example_printout.htm</name>
<name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
<name>defining_probe_changers.htm</name>
<name>Inserting_Quick_Fixtures.htm</name>
<name>Shank.htm</name>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<name>Additional_Information_on_the_Machine_s_Axes.htm</name>
<name>Step_5_-_Prepare_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<name>Probe_Setup.htm</name>
<name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
<name>Step_6_-_Measuring_Port_1.htm</name>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<name>Step_6_-_Measuring_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_and_Removing_Quick_Fixtures.htm</name>
<name>SP600__Step_3_-_Prepare_for_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_the_No_Machine_Item.htm</name>
<name>Deleting_the_Machine.htm</name>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<name>SP600__Step_6_-_Take_the_Third_Manual_Hit.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>SCP600__Step_2_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Showing_an_Animated_Probe_Changer.htm</name>
<name>ACR1__Step_1_-_Select_the_ACR1_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
<name>ACR1__Step_3_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_4_-_Define_Ports.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_5_-_Prepare_for_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_6_-_Measure_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_7_-_Measure_Port_8.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_9_–_Measuring_Datum_Sphere_with_PEM_Extension(s)_(optional).htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>SP600__Step_4_-_Take_the_First_Manual_Hit.htm</name>
<name>Step_1_-_Select_the_SP600_Probe_Changer.htm</name>
<name>ACR1_Step_10_Review_Calibration_Results.htm</name>
</topics>
</rhpml>
Thanks,
JaredHi Jared.
I don't know if this is at the root cause of the error but I see that the closing </name> tag has a number of instances where there is a spurious space inside it:
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</ name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Home_Position_area.htm< /name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</n ame>
<comments></comments>
<frameset>0</frameset>
</topic>
There are others.
The RoboColum(n)
@robocolumn
Colum McAndrew -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I have SCCM 2012 SP1 recently upgraded to R2. I'm currently setting this up to migrate my production 2007 site. However, I'm trying to use Content Library Explorer on my DP's. I have 3 dps. DP2 connects fine but when i try and connect to DP1 +3 i get
the following error: An error occurred while trying to read the package metadata. The package
PackageID is invalid and must be redistributed from the Configuration Manger console.
Now i can't find any trace of this at all in the console. In the SMSPackagesHist table i can see the package ID and the deleted time was 29-07-2013. This most likely was me trying to create software updates back last year when i initially setup the site.
The package is not listed as content on any of the 3 DPs and i can't find any trace of it at all in the console.
I'm not very familiar with 2012, so not sure what I've done.
Any help or advice appreciated.
Thanks
JaneHi Torsten,
thanks for this. I did a search of the WMI key and found this document: http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx (does
this mean it is supported?)
however, on those 2 DP's in that class, the suspect package ID is not listed!???
Any more ideas?
Many thanks
Jane -
I tried to format a new WD mypassport ultra external HD and while trying I think I have erased it. The image apeared on my pc screen upon connection but has dissapeares and now shows format not supported when open in finder under devices.
Try Ejecting the drive, unplugging it and then plugging it back in.
I also have a correction, Volume Scheme was for older OS Xs and it should read Partition Layout.
1. Select the Partition tab.
2. Under Volume Scheme Partition Layout select 1 Partition and click on the Options... button.
3. Select GUID Partition Table in the drop down window and click OK.
4. Set the Format to Mac OS Extended (Journaled) and click the Apply button. -
Getting Page not found while trying to read ws-addressing.xsd file in IE
Hi All,
Here I am creating dynamic partner link to call OSB service in my BPEL process. I wan make it dynamic to change run time server address and port numbers. Here I am getting Error (Error occurred reading inline schemas) while creating reference variable as per BPEL cook book. To resolve that exception, I have created /bpel/system/xmllib/ folders in SOA 11g and placed ws-addressing.xsd file. After I am trying to import in BPEL process, still I am getting same Exception.
Even I tried to read ws-addressing.xsd file through IE browser (http://Host:Port/orabpel/xmllib/ws-addressing.xsd) after placing that directory(/bpel/system/xmllib/). My SOA server and everything is running.
Thanks in advance.
mallyPaul,
You can try the suggestion in this thread on the XE forum:
Re: Problem with importing HTML DB applications
It also shows how to turn on logging in the XE web server. -
Error while trying to read more number of data via Serial port
Hi All,
I'm newbie to Serial Port programming. I'm trying to read data from dos based system which is sending 150 characters (including) at a time. That time my programm was fine but now they increased the length of the characters 300, now my programming couldn't read data. I'm using byte array to capture the data byte buff = new byte[3048*3048]Ypur reply would greatly appreciate.You have a byte array with more than 9 million bytes. What does that have to do with reading 300 characters?
-
Hi,
I am trying to read the "Received" headers for an email that is coming into my inbox. The headers are long and hence getting "folded". For example an email has these 2 headers [besides others]:
Received: by 10.54.23.20 with SMTP id 20cs33514wrw; Fri, 8 Apr 2005 11:
04:10 -0700 (PDT)
Received: by 10.54.20.77 with SMTP id 77mr1958208wrt; Fri, 08 Apr 2005
11:04:10 -0700 (PDT)
You will note that there are 2 "received" headers. The first one is getting folded just after the hour [and ":"] has been specified (folds just after Fri, 8 Apr 2005 11: )
The second one is getting folded just after the year has been specified.
The first lines of both the headers end with a CLRF
The second lines of both the headers start with a white space [simple space]. Folds just after Fri, 08 Apr 2005
As per documentation of Javamail:
"Unfolding is accomplished by regarding CRLF immediately followed by a LWSP-char as equivalent to the LWSP-char."
If I do that [replace the CLRF and the next white space into a single white space] - the format of the first header's date is invalid [as the hour and minute have an extra space in it] - "Fri, 8 Apr 2005 11: 04:10 -0700 (PDT)" [hence not parse-able]
In this case the date in the second header is valid.
Instead if I replace the CLRF and white space with an empty string [no white space] the first header becomes valid. However, the date in the 2nd header is not more valid [As the date is translated into �Fri, 08 Apr 200511:04:10 -0700 (PDT)�. Note that the year and the hour get clubbed together].
The 2 headers seem to have contradictory needs for unfolding.
The headers are being set by external programs. My code is responsible for sending the email and then reading the email.
Are there any utils that will abstract the "unfolding" logic?
or is there a way to write a generic way to unfold email headers [which will support the above to headers]?
Thanks,
AnnuPrintStream wr = new PrintStream(socket.getOutputStream());
wr.close();I suspect this is the problem. You could try socket.shutdownOutput() - or you could just leave the streams alone and let socket.close() shut things down.
Grant -
BODS 3.2: Error opening ABAP file while trying to read ECC table
I have an ABAP data flow where I'm trying to read an ECC table (I'm following the DS 3.2 tutorial on "Extracting SAP Application Data"). I have the ECC datastore store set up with the following:
ABAP execution option = Generate and Execute
Data transfer method = Shared directory
Working directory on SAP server =
A\interfaces\D11\110 (SAP app server)
Application path to the shared directory =
A\interfaces\D11\110 (SAP app server)
Generated ABAP directory =
B\opt\ds\ds32dev1\transfer_ABAP (DS server)
However, when I run the job I get the following error:
R3C-150301 12/2/2011 1:54:41 PM Error opening file <//B/opt/ds/ds32dev1/transfer_ABAP/zcustdim.aba>.
I have verified the DS userid has read/write access to the Generated ABAP directory. Any ideas on what I'm doing wrong?
Thanks...Hi Brad, Sorry Tushar,
I see the discussion has moved on (to the second page ) Still the below should apply. Please give a look and see if it explains things.
It looks like a permission issue creating the file if I'm not wrong.
http://wiki.sdn.sap.com/wiki/display/EIM/How+to+execute+the+ABAP
point 3.
It will be the abap script that will write the file into the folder you added in the DataStore.
You can even goto the folder the abap code is in and search for the path in there.
Here a good example for windows from the wiki
http://wiki.sdn.sap.com/wiki/display/EIM/shared_directory+transport+method
with this important sentence:
However it has to be made certain that the OS user running the ABAP has the
permission to write there, and the user running the job requires read
permissions one the directory and the created file. What OS user is writing the
file? It is the user running the entire SAP instance. And who is reading the
file? The user running the DI service
So:
The working directory = where the SAP user = the user that is running the SAP installation is instructed to write the .dat file. The folder is probably local to the SAP installation?
Shared folder is for the JobServer to pick up that file. Same physical directory ...but this time from the DS user prospective. Is the JobServer on the same machine or does the folder have to be mapped?
Keep in mind that for a job server on Windows, Windows shares with \\<server>\path are OK, but I don't believe there is any other network drive mechanism, so no NFS paths in the <server>:/ or trying // etc.
Regards
Norbert
P.S. In production you should then switch to "execute" instead of load and execute and an ftp server instead of shared folders. -
Mail crashes while trying to read "Table of Contents"
Whenever I try to open Mail, it sits there trying to read the table of contents, after about 30 seconds, it starts to play with the beach ball, then quits. I've tried repairing disk, permissions, and removing all the files I can think would help. I've run out of ideas, and would really like to get this fixed.
P.S. I have 3 other accounts on my computer, and they get mail from the same place, and don't have any problems.
P.P.S. I have 2882 messages in my inbox, and roughly 20 GB disk space left.You removed all mailboxes (.mbox files) located within this problem account named folder at Home > Library > Mail and the same occurs when re-launching Mail?
The TableofContents file is a package file for a .mbox so it is hidden.
I'm not sure how you removed all mailboxes for this account but quit Mail first and using the Finder, go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account). Move the account named folder to the Desktop.
Launch Mail and if it launches successfully without locking up and quitting, a new account named folder will be created automatically by Mail within the account named folder.
All email clients have limits and the recommended size limit for a Jaguar or Panther mailbox is 1GB and for Tiger Mail, 2GB.
An "overstuffed" mailbox issue can occur at any mailbox size (which means the mailbox has some corruption and/or is over the recommended size limit) but is more likely to occur depending on the number and size of message attachments contained in a mailbox and especially as a Jaguar or Panther mailbox approaches or exceeds 1GB in size.
Since an account's Inbox mailbox is usually the most active mailbox, it is not a good idea to use an account's Inbox mailbox as the final storage location for all received messages not deleted. -
OS 10.5 - Boot Camp - Windows won't read Mac Disc for Driver Install
Hello everyone.
I have been through half a dozen headaches and a dozen hours of time wasted on this problem. I've tried multiple windows discs untill finally I bought a brand new version of Windows XP Pro. I've followed all of the instructions in my printed boot camp manual and I continously run into one problem:
Once windows is installed completely and I am at the windows desktop and need to eject the windows disc and insert the leopard disc to install drivers, I do so and windows does not recognize the mac disc whatsoever. It says the drive is empty, it is 0kb of 0kb, I cannot explore the drive, I cannot do anything. If I open it it is blank. I cannot access the internet in any way on windows because there are no corresponding drivers.. so I am at a loss.
Can anyone please help me? What do I do? I really apologize if this question has been answered, but I could really use some help.Hi Sotaris,
It's a little vague what you mean by the "leopard disk". Do you mean the disk of drivers Boot Camp burns, or the actual Leopard installation DVD?
What you're supposed to do is launch Boot Camp while booted to the Mac OS. One of the first things it does is create a CD of Windows drivers that XP will need for your Mac. So you must have a CD-R or CD-RW on hand.
After that, Windows XP is installed. When that's done, there will be a number of hardware components that XP naturally doesn't recognize. That's when you insert the driver disk Boot Camp creates. I may have listed the order of things a little bit off here, but the main point is it sounds like you're skipping, or missing the part to create the Windows driver disk and trying to put the Leopard DVD in the drive. -
Problems reading Mac OS DVDs after installing 10.4.11
OK - I guess I should have read the many posts out there about the problems with this software update. However, I did not and now am encountering two bizarre problems. Perhaps someone out there can help.
I own a Macbook and downloaded 10.4.11 this morning. Everything was running just fine until then. Now I have two problems:
1) it cannot read Mac OS DVDs (neither the new Leopard disks I just got, nor the original backups of 10.4.9 that came with the macbook). The disks are fine and can be read without a problem by my iMac. The drive on the macbook is fine since it can read other DVDs (e.g., iLife 08 DVD, movie DVDs). It seems to be limited to OS 10.4 and 10.5 installation CDs.
2) a smaller but also annoying thing is that my apple-supplied stocks widget is reading wrong stock prices.
Any suggestions? Thanks.
DerrickOK - I guess I should have read the many posts out there about the problems with this software update. However, I did not and now am encountering two bizarre problems. Perhaps someone out there can help.
I own a Macbook and downloaded 10.4.11 this morning. Everything was running just fine until then. Now I have two problems:
1) it cannot read Mac OS DVDs (neither the new Leopard disks I just got, nor the original backups of 10.4.9 that came with the macbook). The disks are fine and can be read without a problem by my iMac. The drive on the macbook is fine since it can read other DVDs (e.g., iLife 08 DVD, movie DVDs). It seems to be limited to OS 10.4 and 10.5 installation CDs.
2) a smaller but also annoying thing is that my apple-supplied stocks widget is reading wrong stock prices.
Any suggestions? Thanks.
Derrick -
IMovie crashes at startup while trying to read iPhoto library
Hello,
Like many others here, iMovie 7.1 won't start up properly for me. I'm feeling a little frustrated because I bought iLife 08 quite a while back and one of the components I paid for doesn't work AT ALL. It didn't work in Tiger for me, and when I installed Leopard FRESH with nothing else but iLife it still didn't work.
Here is the error I receive:
Process: iMovie [5611]
Path: /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier: com.apple.iMovie7
Version: 7.1 (506)
Build Info: iMovieApp-5060000~13
Code Type: X86 (Native)
Parent Process: launchd [88]
Date/Time: 2007-11-25 00:05:49.850 -0800
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_ARITHMETIC (SIGFPE)
Exception Codes: EXCI386DIV (divide by zero)
Crashed Thread: 0
Thread 0 Crashed:
0 ...ickTimeComponents.component 0x95cb9b32 STMediaSTAddSampleReferencesS64 + 2376
1 ...ple.CoreServices.CarbonCore 0x93c915ea CallComponentFunctionCommon + 1494
2 ...ickTimeComponents.component 0x95c9548a STMediaComponentDispatch + 125
3 ...ple.CoreServices.CarbonCore 0x93c90ef5 CallComponentDispatch + 29
4 ...ickTimeComponents.component 0x969378a5 MediaSTAddSampleReferencesS64 + 86
5 ...ickTimeComponents.component 0x95c6affb Video2STAddSampleReferencesS64 + 111
6 ...ple.CoreServices.CarbonCore 0x93c915ea CallComponentFunctionCommon + 1494
7 ...ickTimeComponents.component 0x95c6a687 Video2ComponentDispatch + 210
8 ...ple.CoreServices.CarbonCore 0x93c90ef5 CallComponentDispatch + 29
9 com.apple.QuickTime 0x908c8f81 MediaSTAddSampleReferencesS64 + 86
<snip>
I have (after reading people's suggestions):
1. Removed com.apple.quicktime.plugin.preferences.plist
2. Made sure there is nothing except for AppleIntermediateCodec and AppleMPEG2Codec.
3. Changed my color profile.
None of this has worked. Same error.
Any suggestions? Thanks!Hi,
I wouldn't say I have such a lot of movies in Iphoto but deffintely they are quite a few... anyway, I suspect it will never end because the timer gets bigger and bigger; and yes I left it running overnight with no luck.
Is there any way to see in which video is iMovie having the problem? The other workarround means having to backup and delete videos randomly until I find "the bad one".
Cheers.
Maybe you are looking for
-
Itunes "Ignoreing" some of the MP3 files
Afterthe latest issue of Itunes that i have slapped into my system a while ago, I realize that Itunes won't recognize some of the properly tagged, legally bought, or ripped mp3 files from my own collection. I am a year old Itunes and Vista user didn'
-
Need HELP with objects and classes problem (program compiles)
Alright guys, it is a homework problem but I have definitely put in the work. I believe I have everything right except for the toString method in my Line class. The program compiles and runs but I am not getting the right outcome and I am missing par
-
No PPPoE Configurations were found.
I have an icon in the toolbar on the desktop which is shaped like 2 arrows facing away from eachother with a couple of dots inside them. I only have one network set which is wi-fi so I don't understand how to get rid of the icon. I would like to be a
-
When I changed the cupertino weather info to my local city, I wound up with 2 weather widgets. Can I remove one of them from the dashboard display? Thanks, Olga
-
Hi Guys, Is there an easy way to adjust the format of a section? If i have two parallel sections on a page and each section store 3 small reports, each report takes as default its own size, making the page look really messy. Is there a way to adapt t