Lost my username for Blackberry emails???

Hi,
I had my email account set up on my blackberry and was getting all my emails through no probs then I got a message to say I had to verify my password so had to type in a username and password but I was never given a username and have no idea what it is or where I can find it??
I have contacted o2 who have said to contact blackberry but Im not having much luck, can anyone help??

Hi MrsLyon25
Try clicking on the Forgot Password link on the sign in page.  Your username and password should be sent to you via PIN message.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • I forgot my username for my emails settings

    hello , i forgot my username for my email settings , and i told everyone about this problem they said i have to call Zain , im from Kuwait and zain is the Provider for BIS !
    and Zain Kuwait are really stupid and know nothing about Blackberry ! i dont know why they sell it , and they give the services
    they just want money but no support !
    And evertime i contact them to get the username , they say no its not our problem we cant fix it , we'll call u later and they never call !
    i talked to them again today , they keep saying that's ur problem we cant do anything for you , and we cant get ur username back , this is the first time we hear about this issue.
    and please now i want to add and delete emails , i cant ! i just can get the password from : http://mtc.kw.blackberry.com/ when i put my pin ! but i cant get the username !
    can anyone tell me what to do please ? im really sick of this

    mdriver23 wrote:
    i am encountering the same problem is there any way how i can fix it myself without having to waste so much time on the over-the-phone support. It just takes too much time and i would just like to change the email settings, taking off my old email (On which i am getting endless loads of spam) and enter my current email adress.
    HI and Welcome to the Forums!
    There are about 6 different problems that were discussed in this thread -- I'd request that you open a new thread and specify exactly which issues you are having, what you have already attempted, and what the results were. Then we can provide you with assistance that is targeted specifically for you.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Changing the Username for an email address

    My employer recently moved over to exchange. The server wants the username for the login to look like this:
    <domain>\<username>
    While when entering the email address into the blackberry it automatically makes the username just the first part of:
    <username>@<domain>
    When looking at the email settings on the device, there doesn't appear to be any way to change the username so it ends up in the desired format.
    Is there a way to make this change or am I just out of luck? Thanks!

    The rate is not a parameter for the Realizing phase.
    The realizing phase is necessary to define the kind and the property of the outgoing stream.
    I.e. the audio or the video format of the single track of the stream.
    think at the pitch like a gain (volume). U can increase the volume also after the realizing phase.
    YES you can modify the pitch (rate) in any moment before or after have realized the processor / player. Probably i bad wrote but ... to start a proc/player you have always to relize them. the rate modification is independent from the realizing.
    Edited by: Nemo83 on Jan 28, 2008 6:48 AM
    Edited by: Nemo83 on Jan 28, 2008 6:48 AM

  • Signature for Blackberry email using Active Sync

    Am I missing how I can set a signature for my emails sent from my blackberry email for work with active sync?  Seems like with the Torch, I did this on the device...
    Please help...
    Solved!
    Go to Solution.

    You do it on the device with the Z10.
    Open your Hub
    Touch the overflow three dots icon at lower right.
    Settings
    Email Accounts
    Touch your email account
    Scroll down to the signature setting.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Forgot Username and Password for Blackberry email interface

    I have a Curve 8330 that a friend gave me. When I tried to begin to have my email accounts sent to the blackberry it said I needed the username and password. The problem is she forgot them. Can it be reset?

    Hi and Welcome to the Forums!
    Yes, by the carrier...contact them.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Getting my username for my Email set

    I setup a few emails accounts when i first got my Blackberry 8330. I don't remember my username. The system is setup to give you your password based on a username. I cannot create an account and start over because it see's that my pin # already has an account. Does anyone know where I can go to get my username attached to my pin. My provider is Verizon Wirless. I have checked there site and have found nothing.

    Hello, I just had the same problem with my girlfriend's phone. You may be able to have the same luck I had. We used a laptop and went to at&t site, and found the link to the blackberry internet service site. From there you should be able to request your password, but to get your username, try the first letter of your first name and either your full last name or possible 4 letters. Hope this helps!

  • Google Talk for Blackberry login failure, invalid username and password

    Hi Folks,
    I have a new 8520 Curve from which I cannot seem to log into Google Talk using the gtalk for Blackberry application. I have absolutely no problems logging into the service with applications from Google such as Voice, however the Google Talk by RIM is failing.  I have tried with both my standard gmail account and my business Google Apps account with no success.
    Here is what is happening.
    Start Google Talk
    I type in my username
    I type in my password
    I select Remember Password
    I select Automatically Sign me in
    I push Sign In
    The Sign in Fails with "Username and Password do not Match. You Provided ([email protected])."
    I really honestly know my password, and have even signed into google services from this very phone in past few minutes so something else is going on.

    It is half a year later and I have EXACTLY the same problem.
    Why can this app not be fixed?

  • Username for email setup

    Hey, 
    I've had my torch for a little over a year now and when I first set up my emails, everything worked perfectly fine with it, but now it won't let me recieve emails to my phone at all from my gmail account. My first problem was that I needed a password as I thought I knew my username, so I went on blackberry's website and changed my password. My problem now is that it still won't allow to use my setup and says the combination is wrong, which means my username is wrong. On the blackberry website it says my username is my email address and when i try to change it to a normal username, it says that it has to be an email address. But on my blackberry torch when i try to put in my email address as my username in my email setup it tells me that 'the username is invalid. A user name must be at least 4 characters' and I found out that it's the @ sign which makes it invalid. 
    How can I find what my username is, or change it so that I can restart my email or at least check that it works, because i cannot send emails either as it says that the account is in invalid mode. 
    Also, my wifi hasn't picked up any wifis at all, even though it used to. Is there anywhere I can turn it on or anywhere where I could possibly have something turned off without knowing it? It's very frustrating when it doesn't find any networks, when I'm standing right next to a perfectly working router. 
    Thanks, 
    Penny 

    You can always try going to your carrier's self-serve BIS site to set up email addresses on your phone (your carrier will help you with it along the way) or you can type www.blackberry.com/integrate from your phone's browser.
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Hi there I lost my password for my original iTunes account I can't recover it because the email address it is registered under is not longer valid How can I access my old account?

    Hi there.
    I did a factory restore and then restored it with iCloud back-up. I have been using lots of Apple products and i have used three different email adresses. Almost all apps restored perfectly but everytime i try to play a song in the Music app, i asks me for a Apple-ID i had no idea i have used.
    Hence:
    I lost my password for my original iTunes account
    I can't recover it because the email address it is registered under is not longer valid
    How can I access my old account?
    Can't find a place to change the email address to my new one without the password which I no longer remember.
    There is no way to just erase Apple-ID's on my device either.
    What to do? Should i ju give up and start from scratch and delete 2 years of stuf?
    Cheers!

    If you can remember the answers to the security questions when you set up that account - I think that you can reset the password without needing email authentication. You can try it here. Read it and see if it's possible. But if you can't remember the answers to the questions it will not work.
    http://support.apple.com/kb/ht1911

  • I have just recently bought a MacBook Air. I am looking for an email which I put into a folder on my Mac Pro. The smart folders have come across to the Air, but not the 'On my Mac' folders. Are they lost?

    I have just recently bought a MacBook Air. I am looking for an email which I put into a folder on my Mac Pro. The smart folders have come across to the Air, but not the 'On my Mac' folders. Are they lost?

    Are you sure that the "On My Mac" folders weren't empty? If all your mail accounts are IMAP, they may have been.

  • Lost username for WRT54GS, resetting router doesn't seem to restore defaults

    I lost username for WRT54GS so I tried resetting as per instructions, holding down reset key for 30 seconds, but can't log in using 'admin' and blank password, which I understand is factory default, and which should have been restored on reset--right? I have reset the router at least 3 times, always making sure I push reset key in for 30 seconds. That's the simplest to explain of two related problems.
    On a second computer on same network, I have no Internet access at all, and if I try to get to the router it says it can't find 192.168.1.1. Since I can access the Internet on computer #1, and also have a voice over IP device hooked up to router that is also working, I assume this problem is on computer #2 and not the router EXCEPT--how does this relate to the problem stated for computer #1?
    Before this particular way of acting, computer #2 was announcing that there was an IP address conflict. It doesn't say that now, it just can't connect to anything. What's odd is that if I display network connections on computer #2, the Linksys connection shows and displays strong signal exactly as it does on computer #1, so obviously computer #2 can 'see' the router, but clicking 'Connect' on the wireless network connections window doesn't work, it simply won't connect. I tried setting up network again but that didn't clear the problem.
    I have a great suspicion this has to do, at least in part, with IP addresses but don't know where to go from here.
    I appreciate detailed step by step instructions because I am a novice at this. Brave but ignernt.

    Actually, its the other way around, blank username and admin for the password.

  • Entourage error "The server for my email acount returned the error "Login Failed". Your username/password or security settings may be incorrect. Would you like to try re-entering your password?"

    I have 1 user on a Mac who just started having a pop up message when opening entourage "The server for my email acount returned the error "Login Failed".
    Your username/password or security settings may be incorrect. Would
    you like to try re-entering your password?" I know the settings are right because the users mail works on iPhone,iPad,an windows machine. I have deleted entourage plist and also tried a new user same message appears in new user.

    See thread here:
    https://discussions.apple.com/message/23175721#23175721
    It worked for me.

  • Email address as an username for the ADF application login.

    Hi All,
    We have a requirement in our ADF application by creating usernames as an email address .We created an ADF application and deployed on the server by creating some users in the jazn-data.xml in our project code with the users as "admin1","admin2" as the actual requirement is to created the usernames as an email address say example "[email protected]".
    Can we create the user names with the email address as i have created some usernames in the Enterpise Manager as it dosent allow the special characters other thatn "."
    Any help in this highly appreciated.
    Please see the below link
    Re: Email address as an User in ADF application.
    Regards,
    Nagaraju .D

    Nagaraju,
    You can configure the application to use a different security mechanism other than jazn-data.xml (known as the file-based provider). Using something like LDAP or a custom JAAS provider would enable you to do what you want.
    The security documentation for OC4J is [url http://download.oracle.com/docs/cd/E12524_01/web.1013/e12514/toc.htm]here
    John

  • Email account for blackberry

    i go to setup wizard to make my email account..but it keeps asking me if my system adminstration gave me a password..who is my system administration and how do i set up my blackberry email account?

    Since you're asking the question, I would guess you're selecting the wrong email setup.  You're selecting a Business email setup rather than an Internet email setup.  This is for connecting to a (typically) Corporate BlackBerry Enterprise Server to receive your corporate email.  If you are supposed to be setting this up, your IT department would have sent you an "Enterprise Activation" password.
    You want to select Internet Email.  You should have an "Email Setup" or possibly a "Personal Email Setup" icon - if it's not on your main screen, check under the Applications or Setup folders.
    That said, it may be easier to set up your email from your computer.  Links for all North American providers is at the bottom of this page:
    http://na.blackberry.com/eng/support/software/internet.jsp
    One thing.  Typically you get a BlackBerry email account with a domain that ends in @provider.blackberr.net.  While delivery of email through this address is typically almost instantaneous, there are a lot of reasons to NOT use this email address.
    For one, there is NO Spam filtering available.  Should your email address get found by Spam operations, you will need to set this email address to NOT forward email to your device, and then tediously add email addresses to be allowed to be delivered.  NOT FUN!
    Second, there is no other access to messages through this address.  Once a message is delevered to your BlackBerry, that's the only place it exists, and if you delete it, it's gone forever.
    Both Gmail and Yahoo work excelently with a BIS (BlackBerry Internet Service) email setup, and you still have access to your email through the Web.  You can synchronize Reads with both, and delete on your BlackBerry can delete on your Web email account.  Yahoo delivery is nearly instantaneous, and sometimes Gmail is too (don't know why some of my accounts are, and some arent!).  Both have excelent SPAM filtering.
    Be aware that after you set up one of these email addresses, you want to add a filter to NOT forward email FROM that email address to your device.  If you don't do this, you'll be asking why you receive a copy of any email you send from your BlackBerry - a common newbie complaint!
    Good luck!
    Jerry

  • KB05133 - Email reconciliation features for BlackBerry Internet Service

    There are lots of questions about what reconciliation features / functionality options there are with BIS ... well, from the horse's mouth, here we go:
    KB05133 - Email reconciliation features for BlackBerry Internet Service
    I tried to copy / paste the table but I'm not nearly savvy enough to successfully do it; so, click away!
    If you've found a solution through a post; please mark it as a solution.
    If someone's was particularly helpful, give them kudo's!.
    Get busy living, or get busy dying.
    http://blog.port3101.org/hdawg/

    Hi
    drastikbb wrote:
    In the second set of instructions, going directly to the BIS web page, I cant get past the login page, I have tried to register, I have tried to login, I have asked service provider for passwords and I get one dead end after another, I cannot login nor create an account to login to the BIS web site.
    Any help would be appreciated, after 10 years as a loyal Nokia user I am now hoping that the decision to move to BB was not one I will live to regret.
    Regards
    DS
    When you go the BIS account on the PC, is this the place you were told to go by your service provider? My own has my carriers' logo on the page and they provided me with the login details whilst I was on the phone to them. It is THEIR responsibility to set up your BIS and to assist you.
    Whether you try OTA or on the PC, you must have access to your BIS and when you finally get it, setting up the email couldn't be easier.
    I cannot see why upgrading to OS 6 would affect email set-up but as you suggest, the option to put email server details in may have been removed. They are not necessary with BIS.
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

Maybe you are looking for

  • Want to configure BACKUP VPN in asa 5505 for failover link

    Hi, Current i'm having 2 isps one tata and another one reliance iwant to configure the backup vpn for reliance ip for same peer ip which tata vpn had configured i mandatory to configure same SA,ENCRPTION,IPSEC POLICY,KEY,LIFETIME...etc for failover v

  • My observations ( for people that have indexing and connection issues )

    Since cisco takes an awful lot of time doing anything about these problems i decided to investigate the box myself today. I followed advice from various threads and did some digging aroudn with network traffic snoopers and some other tools. First ( a

  • Connecting tomcat and apache

    hi, i am having problem connecting Apache and Tomcat with mod_jk connector. i am not getting any exceptions. the problem is when i am trying to access .jsp pages from apache ... its showing me code .... i have used this just below the <server port=80

  • Very simple question about webapp list layout.

    Hi Everyone! I am having a very simple issue. I have created a web app and it has a default list layout looks like: <table><tbody><tr><td>{tag_counter}. {tag_name}</td></tr></tbody></table> I have placed web app module (using {module_webapps,14273,a}

  • I have lost the password to log into my wi-fi on my computer from my iPad

    I have to retrieve the password for the wi-fi connection from my iPad to the computer. Never been asked this before and have tried all previous passwords to the best of my knowledge.