Lost OEM information (manufacturer, brand, model, logo) after a clean windows installation
Hi,
It's been about a month since I remplaced my HDD, because the original one which has the recovery partition was currupted...
So, I had to do a clean windows 8.1 x64 installation, after that I noticed that the OEM information (manufacturer, brand, model, logo) was lost, and I really want to get it back.
Please help if there's any way to get it back to original.
Thanks in advance !
eCut
@eCut ,
Hello and thank you for posting on the HP support forums. To obtain the original recovery media please check out the following link.
HP PCs - Obtaining HP Recovery Discs or an HP USB Recovery Drive
Or you may contact HP phone support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP
Similar Messages
-
TS1717 i have lost three movies trying to wach them on itunes after downloaded with windows 7
I Have lost movies that Ive downloadded onn itunes trying to play them on windows 7. It shuts itunes down each time.
You can only add music to iTunes Match from your iTunes library on your computer, not from your iOS device. If you have music on your iPad that is not on your computer, you'll have to import it to your iTunes library on your computer to add it to iTunes Match.
Music purchased from the iTunes store can be imported directly to your iTunes library by authorizing your computer for the Apple ID(s) used to purchase the music (in Store>Authorize This Computer), then connecting the iPad to your computer, opening iTunes and going to File>Devices>Transfer Purchases. Music from other sources will require using 3rd party software to transfer to your computer, such as Touch Copy. -
Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions. -
I currently use an HP LaserJet P1102w monochrome printer purchased in October, 2012. Cannot print from mobile devices because HP no longer supports the drivers needed for this. Instead, I must use their "HP app" to print from my iPhone 6. I can, however, printer wirelessly via AirPrint from my MacBook Air(Oct., 2012). Please recommend (name brand/model) an AirPrint monochrome printer that installs flawlessly and works with Wi-Fi using IOS 8 and OSX (10.9.5 Mavericks). Thanks in advance for your assistance
I missed the fact that you're on Snow Leopard. If there's no backward-compatible driver, you might be able to set up the printer as a generic IP printer with the settings shown below. I wouldn't recommend this, though. Either find a printer that's fully supported, or upgrade to a newer OS.
Address
Protocol
Use
Bonjour name
IPP
Generic PostScript Printer -
Types (brand/model) of wifi card is in Acer Aspire V5-573G Notebook (NX.MCES1.003)
What type (Brand/model)of Wifi card is present in Acer Aspire V5-573G Notebook (NX.MCES1.003) ? http://www.snapdeal.com/product/acer-aspire-v5573g-notebook-54208g50aii/620531481275#bcrumbSearchbcrumbLabelId:57
Hello, Here are the Wlan & BT boards of Aspire V5-573G:NI.23600.100LAN BD.2X2.AGN.W/BT.BROADCOM (FOXCONN)NI.23600.102LAN BD.2X2.AGN.WB222 ATHEROR (FOXCONN)NI.23600.103WLAN.2X2.AGN.BT4.0.ATHEROS (LITE-ON) You can use HWINFO64 portable version to find the informations of your board.
-
What gamepads brands/models livedock are compatible with?
What gamepads brands/models livedock are compatible with?
http://www.sonyericsson.com/cws/products/accessories/overview/livedock?cc=gb&lc=en#view=compatible_p...
-
What SSD brand/model that use in the iMac 2011 model?
I am thinking get the New iMac that release couple days ago. I wonder what SSD brand/model that they are using? I don't want to pay $600 for some crappy SSD.
ThanksApple always uses the crappiest components in their computers. This assures that they constantly fail and fall apart within days.
What sort of goofy question is this? Go to an Apple store, find a demo, open System Profiler to find out. -
URGENT: I lost the Lion Partition after repairing the Windows 7 partition
URGENT: I lost the Lion Partition after repairing the Windows 7 partition
I have recent bought a new Macbook Pro and then I start doing all the necessary setup. This is the first time I do such setup with bootcamp myself anyway.
1st: normal MacOS setup, the Lion version has been setup perfectly.
2nd: run the bootcamp and setup the Windows 7, done perfectly as well.
3rd: try to partition and resize the harddrive with the Lion installed and create 2 new FAT partitions (now 4 partitions in total: 1 for Lion, Journaled, 1 for Windows 7 in NTFS, 2 for file sharing purposes in FAT). See if I can have better partitioning to do necessary organisations.
4th: When I want to restart in Windows to see if the newly created 2 FAT partitions can be read in Windows environment and can function norally, the Windows setup does not show at the start up page when I hold the "Option" key during the startup. I then try to restart again, still no such partition but boot directly to Lion.
5th: I tried to repair the Windows 7 with the start up disc and then it worked. I can also see the 2 newly partitioned FAT drive work normally.
6th: When I want to restart in Lion, I cannot boot the Lion OS and I cannot find the start up icon on the startup page even with me holding the "Option" Key.
7th: "MacOS Installation Utility" appears. I tried to repair but cannot as I have neither the Lion setup disc with me (coz the Lion has been pre-installed) nor a time machine backup/ any other backup image to load from.
8th: Tried to "erase and install a new copy of Lion", the partition where the Lion has been previously installed cannot be shown, now indicate itself as "freespace" and not able to be selected for my "erase and reinstall" process.
9th: so I go to 2 other FAT drives to do as the instructions to try "erase" and hope the "reinstall" process can be started. But the Disk Utility ends up saying the drive cannot be dismounted/ cannot verfy...
At the end of the many tries, I tried to shut the computer down and restart again, hopefully something will work still.... the startup page now shows a disk image with ?, I guess NO OPERATION system/ drive detected for booting. So I got a piece of metals without any use now...
Anybody help? Thanks alot!!In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
and Boot Camp: Install or repair Boot Camp drivers.
The other option is to use
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
How to Reset NVRAM on your Mac - Apple Support -
Problem integrating other objects with a 3D model in After Effects
Hello there!
SO HERE'S WHAT I'M TRYING TO DO
For the intro to an episode of my webshow I wanted to have the camera come up from behind the couch (the current movement is a bit berserk but that's another issue) and have it come up to the television.
As it's coming to the tv, I'd like to have it show static or perhaps some bars, then change to either a series of still images or a video clip (whichever gets the job done) displaying the fake commercial to go with the narration.
Finally, after the commercial is done, the camera is to move so the tv screen fills the frame and then I'll transition to the body of the episode.
WHAT I'VE TRIED (AND SEEN FAIL)
1) Greenscreening: This is why the tv screen is the color it currently is. This doesn't work, though, since the TV image is static while camera is not and so it's as if the TV frame is shifting wildly around the image put underneath it in another layer in Premiere.
2) Laying the image over: I tried to brute force it with a layer above the imported Adobe After Effects Composition but even if I could get the camera to sit at a perfect angle for aligning the overlayed image, it only solves my problem for the middle stage (the commercial) - it seems to be impossible (or at least incredibly time consuming) to try and get the overlayed image to align for the first stage where the camera is coming across the room.
3) Inserting the TV image in the After Effects Composition: Whether I do it as a 2D or 3D image, any still or clip that I want to "play" on the television is always in front of the 3D living room model - though I can move a camera inside the room, I can't move any objects it seems.
Now these are being put in as a new layer above the model and I imagine this is what's screwing things up, but I can't insert them into the model in After Effects (I don't think) and since I have more than one image or clip to display on the tv that makes altering the original .psd file a no-go.
SOME TECHNICAL DETAILS
The original model can be found here. It started as a Google Sketchup file that was exported as a .dae into Photoshop, then saved as a .psd that could be brought into After Effects.
Software being used is Adobe Premiere, After Effects, Photoshop (all CS5) and the latest edition of Google Sketchup.
Any help beyond "BUY SOFTWARE X, YOU FOOL" would be really appreciated! I've been working very hard to up the quality of my show with this latest episode and working out the intro is all that's left to do before rendering and uploading!
Cheers,
Oliver3) Inserting the TV image in the After Effects Composition: Whether I do it as a 2D or 3D image, any still or clip that I want to "play" on the television is always in front of the 3D living room model - though I can move a camera inside the room, I can't move any objects it seems.
You are misunderstanding Photoshop Live 3D and overestimating its potential, that's why. Just like any other 3D-ish effect (Shatter, Particular, Form, Card Dance etc.) it is a peek through a window in a 3D world, but not AE's own 3D world. There is no interaction beyond the plug-ins and effects responding to the AE camera. That's all it is. The rest must come from within the effect/ plug-in itself, but in this case it doesn't, because PS 3D by itself is lamer than lame. Anyway, long-standing and well known limitations in AE's "3D". Not all is lost, though. If you can work your way around building a UV pass as explained here, you might be able to stick your content into the scene rather seamlessly, after all. And lucky for you, you can try this for free these days using a PixelBender filter. I'd still recommend the commercial Re:Map because of the quality, though...
Mylenium -
The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works.
The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works. Cant use calibration tools as there's no response to touch. No option in control panal to turn on or off touch capability. I have no computer background so cant really get to technical. Is something simple turned on or off located in some mysterious place? F key or something? Bad machine? Thanks for any input. Sarah
http://www8.hp.com/au/en/drivers.html
I found the driver at the above link. I installed the driver, disabled my graphics card and rebooted. The touchscreen worked. Then I enabled the graphics card. So far so good. Hope I dont have to do this routine too often.
Good luck with it. -
Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL
You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard -
I had to reset my computer,because it was loading up with tons of .dll files so after scan I reset, and lost firefox. I also have firefox , on my phone and 2 windows 7 computers is it possible the files crossed over from my [email protected] account?
Hi,
Form my experience, it may be the issue that IE is not set as default browser.
Do you have another browser in your computer?
http://windows.microsoft.com/en-IN/internet-explorer/make-ie-default-browser#ie=ie-11-win-7
Regards,
Ada Liu
TechNet Community Support -
I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac
You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718 -
I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP
I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this -
HT5902 i lost my ipad can i get my photos from it onto my windows phone
I lost my iPad.can I get my photos from it on my windows phone
yea icloud but it acts crazy on my windows phone. And doesn't have option for photos
Maybe you are looking for
-
When I try to use iTunes to sync numbers doc from my iMac to my iPad, it shares an original version as installed over a year ago. I modify this doc every day and store it to documents, but the iPad won't import it. It doesn't appear as an existing
-
IWeb, E Mail Headaches, PLEASE HELP!
I am going nuts! I published three sites with iweb-all look great, BUT: I can not for the life of me get the email-me buttons to work! I have tried hyper linking them, doing text & linking that, I even used Wills button idea. Nothing works! Correct m
-
Hi friends, Ive two questions for two smart forms: 1. SRM_PO_CREATE -Purchase order create 2. SRM_PO_CHANGE Purchase order create Both are copy of BBP_PO. Question 1 In IMG, SRM-SRM server-Cross Application basic Settings->Set output Actions and
-
My tabs have stopped opening, any ideas why
i can only use the tab that is open, i cannot open a new tab. this hpeened after i was trying to reinstate autofill, also the icon for autofill is missing and i cannot find it
-
Hi, I am working as a PLSQL developer since last 3 years ,have a oracle certification on it. My current profile also includes dba activities related to development and test databases. Wanted to ask if i continue further in plsql would doing a oracle