Lost of Sounds when launching an App

Yesterday I noticed that when launching an App such as Crazy Birds or Fragger, or etc. that the sound is now missing. From the desktop I can adjust the sound to the max rating but when an App is launched, the sound is no longer adjustable and the play is on mute. This is happening on two IPads. Anyone else experiencing this? Ipod and Video play work ok.

If you're talking about the "alert" sounds (rather than regular volume such as for music), flip the switch next to the volume controls.

Similar Messages

  • When I downloaded 4.3 i lost the sound when I record videos

    When I downloaded 4.3 I lost the sound when I record videos

    That is the issue. FCP works with footage as a Rectangular pixel setting.
    Try this little trick and see if it doesn't solve it:
    www.proapptips.com/shane NON-STANDARD CODECS
    Shane

  • Why system alarm sound when opening an app on my MBP 13"?

    Recently started to hear system alarm sound when opening an app., eg. Mail, Safari (usually from the Dock). No apparent operational problem, but quite annoying, especially since I don't know why. Happens on my 13" MBP, but not on my iMac, both running ML 10.7.4.
    Repair Disk Permissions and Verify Disk both OK.
    Any clues from anyone??

    Disable: Play user interface sound effects in System Preferences > Sound > Sound Effects
    If that doesn't make a diffeence, check your Dashboard widgets.

  • TS1702 I lost all sound in my game apps why?

    I lost all sound on all my game apps why?

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    IDT Audio Installer - Windows 7.
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Error when launching promoted app from RemoteAPP

    Hi:
    We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
    "Personalization:
    This theme can't be applied to the desktop.
    Try clicking a different theme"
    Help!
    Thank you,
    Stangride

    If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
    are manipulating themes.

  • Lost swish sound when sending mail

    I seem to have lost the swish sound when sending apple mail... sound is on for all else...
    how do I get it back?

    is there some way to move them to the desktop then dump the main mail folder then - 'get the sound back with fresh account' - then reimport all the settings? (all for less manual work
    Let's assume for the moment that you want to do that. You could do this:
    Quit Mail.
    Go to Home/Library/Mail and copy the entire folder to your Desktop, then delete the Mail folder.
    Go to Home/Library/Mail and copy the com.apple.mail.plist file to your Desktop.
    Restart Mail and let it find and/or create new mail account folders for you, then see if your sound is back.
    However, since you just setup an email account in the test user account and it worked, that points to the problem being with a corrupted Mail preferences file. So, if you just delete that and then restart Mail and setup your accounts again, that may very well solve the problem.

  • No sound when on Facebook app. Sound ok when using I pad otherwise

    How can I get the audio to work when using Facebook app?  The audio is ok when using the iPad otherwise.  I already tried to fix by deleting the app and reinstalling also tried to reboot.  No luck. Please help.  I had been using Facebook previously without any problem.

    Hi,
    Try a clean installation of the flash plugin/activeX as follows.
    First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows, open your Download folder and run the uninstaller.  After this has completed, restart the notebook.
    When windows has reloaded, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    When the installation has completed, restart the notebook again nefore checking if you now have audio on the internet.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Running Dual Monitors - Selecting a target monitor when launching an app

    Hello - I recently made the switch (back) to the Mac. I have a 23" LCD connected to my MacBook Pro...
    I wanted to know if I can target the 23" LCD when launching Adobe Illustrator (for example)...now AI opens on the MacBook...and I drag the main window over to work. Was wondering if this was possible. Thanks for any input.

    In the Displays control panel, Arrangement tab, you will see two blue squares, representing your two monitors. Their position determines mouse behavior, and the white stripe at the top of one is the Menu Bar. Drag that to the screen you want as the "Main" screen. Many programs will go to that screen. Some open where you last had their window.

  • Hiss noise from iPad2 speakers when launching an app that uses the speakers

    A couple of months ago I bought an iPad2 Wi-Fi. It was working fine until yesterday that it started making a hiss noise every time an app that uses the speakers was launched, for example when the keyboard clicks sound is enabled it will make noise while typing (this is somehow annoying). Is this a known issue?
    Is this a hardware defect or can it be fixed with a software upgrade?
    Thanks.

    i have the same problem: ipad2 makes noise every time when plays sound (music, video, games, typing)
    i'm sure that problem is hardware..
    the noise exists only with speaker: if i connect headphones noise disappears

  • Application Launch Failure error when launching various apps

    When trying to open several different apps, an error message "Application Launch Failure" displays. The text of the message is:
    The application "Flash Professional" could not be launched because of a shared library error: "<Flash> <CarbonLib> <CFMPriv_OpenScripting> "
    The application listed depends on the one I am trying to launch. For example, when I try to launch Word the message is:
    The application "Word" could not be launched because of a shared library error: "<Word> <CarbonLib> <CFMPriv_OpenScripting> "
    I have not made any recent changes to my system and do not know how to resolve. Any suggestions?
    Thanks!

    I am having the same issue with my Mac Power PC G4. "The application Excel could not be launched because of a shared library error: 2<application><CarbonLib><CFMPriv_LaunchServices>"
    I was reading your advice above. I don't have Leopard yet, so I was hoping there was a way to fix this problem with out moving to Leopard.
    Also one more thing. This problem started after I did the newest Safari update. Not sure if that has anything to do with it, just thought you might need to know that.
    Any help you could give me would be great!

  • Why won't my ipad2 play sound when i open apps

    I just got the ipad 2 it is working great in every other way as fare as i can tell, but when ever i open an app, it wont play the sound from the app. i have checked every thing i can think of. all apps and every thing have been updated. the ipad 2 will play my music and movies just fine its only with the apps that i downloaded. help please!!

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds. So check the side switch first if you have no sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • I lost my sound when firefox updated on my computer. Also said something like not compatible to AVG . Does this mean my security is no longer working? What happened to my sound from internet sites????

    Sound doesn't work when on the internet. Only has happened since firefox updated on my computer Aug. 25-26 sometime. All of my sound divices work fine off the net.

    Reset the SMC and PRAM each at least 2-3 times. I don't know where you got instructions for these resets so please navigate to Intel iMac SMC and PRAM resets for correct instructions just in case.

  • Video clips lost its sound when burned from idvd6

    HELP! I created a 55 min. imovie and when I burn it using idvd6 some of the clips loose their sound completely. The clips play in preview mode both in imovie and idvd. It's after its burned and played on my TV where the sound is gone on only some of the sclips. On others it's fine.
    The clips came from VHS tape dumped on to a Hi 8 tape and then imported through a firewire into imovie. But again I stress some of these VHS clips play just fine. Any ideas? I need this for a High School Graduation party (which is going to be the main entertainment) for July 7. Thanx

    I've also got same problem. Interestingly enough, background music added to DVDs title page plays OK on the burned CD (everything previews perfectly). However, go to 'play' the burned DVD, and while the video is there, the audio tracks are silent. Source material is an iMove project, and audio tracks are all AIFF files.
    Also tried physically burning the DVD with Disk Utility. DVD burns OK, but on playback (both on home stereo DVD player, and on Mac), title slide and background music works fine, but after selecting to play the movie, the audio tracks are all gone... only silence This is with burning directly from iDVD, or by saving the project as an img file, and then burning it to DVD via Disk Utility.
    Any clues appreciated!
    iMac   Mac OS X (10.4.10)  

  • Error when launching flex App?

    ReferenceError: Error #1056: Cannot create property reserved
    on _index_mx_managers_SystemManager.
    What does this error mean? I have been debugging it for about
    a week now :)

    no line, it just gives me that error every once in a while
    when the application is originally launched, but not every
    time.

  • Citrix receiver throws "ssl initialisation error 8" when launching citrix apps from firefox on Windows

    Hi all,
    I recently switched over to mozilla firefox from google chrome as Google has now disabled NPAPI and thus allowing me the inability to launch citrix applications.
    I have installed the latest version of firefox and have the latest version of citrix receiver. When i login to my citrix site and try to launch the citrix applications, nothing happens. When i manually launch the ica file, i receive the error. "Unable to connect to the Xenapp server. SSL initialisation error 8".
    Please help as i need to get this up and running by this week.
    Thanks.
    Regards,
    Ochen

    Unfortunately we can't support plugins here. While still working (some of the time) in Firefox, NPAPI is officially considered legacy, and thus not supported, in Firefox.
    I suggest working with Citrix or using Internet Explorer to run XenApps.

Maybe you are looking for