Lost Part of Partial Visual Field of App

While scrolling through an App..I have lost 1/4 of the visual field on my screen...in other words the App only fills 3/4 of the iPad screen and leaves 1/4 strip blank...Thank you for any help with this... I am very grateful for this community

It sounds like you've got an app that's optimized for the iPhone screen.

Similar Messages

  • I've changed my iphone 4. when I've synchronized if with my itunes I lost part of my apps, in fact, it didn't restore like the other iphone. Somebody do can help me?

    I have a problem with my new iphone 4. I'he changed it (before I had another Iphone 4)
    when I arrived at home to synchronize it, only part of the apps synchronized. I lost part of my apps like TomTom. Somebody have any idea how I can recoup my lost apps?
    thank you everybody for your help! I don't want to pay again for this apps again!!!
    Eli

    apps can only ever by bought 1 time using the same AppleID
    make sure the itunes on the computer you sync with and the iphone have the appleID set the same
    and if you must redownload the apps if bought using the same appleID you will not be recharged for redownloading them

  • HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    You can't, you will need to get a new remote.

  • How can I create an index on the date part of a timestamp field?

    is there a way I can create an index on the date part of a timestamp field?

    LONGENECKER wrote:
    Idea:
    If you find no direct command that allows you to create an index on JUST the date portion of a timestamp datatype column then I recommend you consider splitting date and time into two seperate columns.
    If date is column "A" and time is column "B" then you can concatenate them using a view or virtual column (in 11G) to re-assemble them at run time.
    In the solution I describe above you might trade ease of management for better performing queries.
    Additional Info:
    This thread may be of some value.
    Can we create INDEX on TIMESTAMP column???
    And what datatype do you propose for your columns A and B? The only proper datatypes would be DATE or TIMESTAMP. Both of these inherently carry both date and time components, so that would have to be dealt with anyway. The use of any character or number datatype to hold date and/or time should be treated with an application of Billy's lead pipe.
    Perhaps function based indexes would be a better solution.

  • Can the iOS Field Test app data be written to file with GPS coordinates of readings?

    I can run the Field Test app on my iPhone5 but I cannot automatically store the data revealed by the app.  Would it be possible to do this? and link the GPS coordinates to the data?  or is the network data not accessible from an app?

    Ask the App developer.  There is no such app native on the device.

  • Updated my phone to the new software lost all my music, pictures/videos and apps, how to i get everything back?  someone help!

    updated my phone to the new software lost all my music, pictures/videos and apps, how to i get everything back?  someone help!

    You should have been sycning them with your computer all along.  Sync them from your computer back to the iphone.

  • I've lost my iPhone5 like 40 hours ago. I already turned the Lost mode on with Find my iphone app. But my phone has no data plan so it could not connect to the internet at all. I reported to the police, too. What else can I do? Can anybody advise?

    I've lost my iPhone5 like 40 hours ago. I already turned the Lost mode on with Find my iphone app. But my phone has no data plan so it could not connect to the internet at all. I reported to the police, too. What else can I do? Can anybody advise?

    No...see the link I posted:
    If you did not enable Find My iPhone on your missing device
    If you did not enable Find My iPhone before it was lost or stolen, you can't use it to locate or protect your device, but you can still follow these steps:
    Change your iCloud password to ensure that no one else can use your device to delete or make changes to your iCloud data.
    Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID.

  • HT4623 i was updating my iphone 4 and lost all of my contacts, photo's, apps, etc.  How do I restore this info?

    i was updating my iphone 4 and lost all of my contacts, photo's, apps, etc.  How do I restore this info?

    From backups you made to iCloud and/or iTunes, and items you synced from iTunes originally. 

  • Hello,somebody can tell me if I can find my lost Iphone5 if the "find my phone" app is tunrned off ,I tried to locate my phone and when I sign in says that I need an Icloud account(to sign in I'm using apple id account)Thanx

    hello,somebody can tell me if I can find my lost Iphone5 if the "find my phone" app is tunrned off ,I tried to locate my phone and when I sign in says that I need an Icloud account(to sign in I'm using apple id account)Thanx

    You can't create an iCloud account on your PC.  You have to first create an iCloud account on an iOS device (iPhone, iPad, iPod Touch) or Mac (running OS X Lion or higher).  After creating the account on one of these devices you can use the ID to sign into the account on your PC.

  • Lost Part of Library

    I recently had a hard drive crash and lost part of my music library which was not backed up. Now when I click on a tune I get a message that the file cannot be found. Is there a way I can get music purchased from the i Tunes store replaced? Please help.

    Hi, Line Dancer.
    The music should still be on your computer so the first thing I'd do is check whether or not it is.
    Have a look at this article in the Apple Knowledge Base for details on how to do so.

  • Partially automated field catalog

    Hi friends,
    i know about fully automated field catalog using fm REUSE_ALV_FIELDCATALOG_MERGE and i know about building field catlog manually , but can any one explain me about  partially automated field catalog with sample program.
    points will be given
    Regards
    Vijaya

    hi
    good
    check this report
    *&  Include           ZJNCINCLUDE                                     
    *&  Reincarnations of REUSE_ALV_FIELDCATALOG_MERGE
    Author Jayanta Narayan Choudhuri
            Flat 302
            395 Jodhpur Park
            Kolkata 700 068
          Email [email protected]
          URL:  http://www.geocities.com/ojnc
    These FORMs are for people accustomed to
      REUSE_ALV_FIELDCATALOG_MERGE (despite the 72 ch source line limit)
      but not happy with  LVC_FIELDCATALOG_MERGE
    We do not want to crowd DDIC with too many structures!
    *&      Form  ZJNC_DUMP_LIST  Our Good Old ALV list -  RECOMMENDED!
    FORM zjnc_dump_list  USING value(p_it_name) TYPE c
                               value(p_wa_name) TYPE c
                               value(p_heading) TYPE c.
      TYPE-POOLS: slis.
      DATA:
        stru_ref    TYPE REF TO cl_abap_structdescr,
        comp_tab    TYPE abap_compdescr_tab,
        one_comp    TYPE abap_compdescr,
        one_name    TYPE string,
        type_ref    TYPE REF TO cl_abap_typedescr,
        is_ddic     TYPE abap_bool,
        lt_ddic     TYPE dd_x031l_table,
        wa_ddic     TYPE x031l,
        lt_fcat     TYPE slis_t_fieldcat_alv,
        wa_fcat     TYPE slis_fieldcat_alv,
        ls_layo     TYPE slis_layout_alv,
        l_alv       TYPE REF TO cl_gui_alv_grid.
      FIELD-SYMBOLS: <fs_type>  TYPE ANY,
                     <fs_table> TYPE STANDARD TABLE,
                     <fs_line>  TYPE ANY.
      ASSIGN (p_it_name) TO <fs_table>.
      ASSIGN (p_wa_name) TO <fs_line>.
      ls_layo-colwidth_optimize = 'X'.
      ls_layo-zebra = 'X'.
      ls_layo-window_titlebar = p_heading.
      ls_layo-box_tabname   = p_it_name.
      stru_ref ?= cl_abap_structdescr=>describe_by_data( <fs_line> ).
      comp_tab = stru_ref->components.
      LOOP AT comp_tab INTO one_comp.
        CLEAR wa_fcat.
        wa_fcat-tabname   = p_it_name.
        wa_fcat-fieldname = one_comp-name.
        CONCATENATE p_wa_name '-' one_comp-name INTO one_name.
        ASSIGN (one_name) TO <fs_type>.
        type_ref ?= cl_abap_typedescr=>describe_by_data( <fs_type> ).
        is_ddic = type_ref->is_ddic_type( ).
        IF is_ddic = abap_true.
          lt_ddic = type_ref->get_ddic_object( ).
          LOOP AT lt_ddic INTO wa_ddic.
            CLEAR wa_ddic-tabname.
            SELECT SINGLE
                   dd03l~tabname
              INTO wa_ddic-tabname
              FROM dd03l
             WHERE dd03l~fieldname = wa_ddic-fieldname
               AND dd03l~tabname NOT LIKE '/%'.          " I live in normal
    namespace
            wa_fcat-ref_tabname    = wa_ddic-tabname.
            wa_fcat-ref_fieldname = wa_ddic-fieldname.
            SELECT SINGLE
                   dd04t~scrtext_s
                   dd04t~scrtext_m
                   dd04t~scrtext_l
              INTO (wa_fcat-seltext_s, wa_fcat-seltext_m,
    wa_fcat-seltext_l)
              FROM dd04t
             WHERE dd04t~rollname   = wa_ddic-fieldname
               AND dd04t~ddlanguage = sy-langu.
          ENDLOOP.
        ELSE.
          MOVE one_comp-name TO: wa_fcat-seltext_s, wa_fcat-seltext_m,
    wa_fcat-seltext_l.
        ENDIF.
        APPEND wa_fcat TO lt_fcat.
      ENDLOOP.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          is_layout   = ls_layo
          it_fieldcat = lt_fcat
        TABLES
          t_outtab    = <fs_table>.
    ENDFORM.                    "ZJNC_DUMP_LIST
    *&      Form  ZJNC_DUMP_GRID  Object Oriented
    FORM zjnc_dump_grid  USING value(p_it_name) TYPE c
                               value(p_wa_name) TYPE c
                               value(p_screen)  TYPE n
                               value(p_heading) TYPE c.
      DATA:
        stru_ref    TYPE REF TO cl_abap_structdescr,
        comp_tab    TYPE abap_compdescr_tab,
        one_comp    TYPE abap_compdescr,
        one_name    TYPE string,
        type_ref    TYPE REF TO cl_abap_typedescr,
        is_ddic     TYPE abap_bool,
        lt_ddic     TYPE dd_x031l_table,
        wa_ddic     TYPE x031l,
        lt_fcat     TYPE lvc_t_fcat,
        wa_fcat     TYPE lvc_s_fcat,
        ls_layo     TYPE lvc_s_layo,
        l_alv       TYPE REF TO cl_gui_alv_grid.
      FIELD-SYMBOLS: <fs_type>  TYPE ANY,
                     <fs_table> TYPE ANY TABLE,
                     <fs_line>  TYPE ANY.
      ASSIGN (p_it_name) TO <fs_table>.
      ASSIGN (p_wa_name) TO <fs_line>.
      ls_layo-cwidth_opt = 'X'.
      ls_layo-zebra = 'X'.
      ls_layo-grid_title = p_heading.
      ls_layo-box_fname = p_it_name.
      stru_ref ?= cl_abap_structdescr=>describe_by_data( <fs_line> ).
      comp_tab = stru_ref->components.
      LOOP AT comp_tab INTO one_comp.
        CLEAR wa_fcat.
        wa_fcat-tabname   = p_it_name.
        wa_fcat-fieldname = one_comp-name.
        CONCATENATE p_wa_name '-' one_comp-name INTO one_name.
        ASSIGN (one_name) TO <fs_type>.
        type_ref ?= cl_abap_typedescr=>describe_by_data( <fs_type> ).
        is_ddic = type_ref->is_ddic_type( ).
        IF is_ddic = abap_true.
          lt_ddic = type_ref->get_ddic_object( ).
          LOOP AT lt_ddic INTO wa_ddic.
            CLEAR wa_ddic-tabname.
            SELECT SINGLE
                   dd03l~tabname
              INTO wa_ddic-tabname
              FROM dd03l
             WHERE dd03l~fieldname = wa_ddic-fieldname
               AND dd03l~tabname NOT LIKE '/%'.          " I live in normal
    namespace
            wa_fcat-ref_table = wa_ddic-tabname.
            wa_fcat-ref_field = wa_ddic-fieldname.
            SELECT SINGLE
                   dd04t~scrtext_s
                   dd04t~scrtext_m
                   dd04t~scrtext_l
              INTO (wa_fcat-scrtext_s, wa_fcat-scrtext_m,
    wa_fcat-scrtext_l)
              FROM dd04t
             WHERE dd04t~rollname   = wa_ddic-fieldname
               AND dd04t~ddlanguage = sy-langu.
          ENDLOOP.
        ELSE.
          MOVE one_comp-name TO: wa_fcat-scrtext_s, wa_fcat-scrtext_m,
    wa_fcat-scrtext_l.
        ENDIF.
        APPEND wa_fcat TO lt_fcat.
      ENDLOOP.
      CREATE OBJECT l_alv EXPORTING i_parent = cl_gui_container=>screen0.
      CALL METHOD l_alv->set_table_for_first_display
        EXPORTING
          is_layout       = ls_layo
        CHANGING
          it_outtab       = <fs_table>
          it_fieldcatalog = lt_fcat.
      CALL SELECTION-SCREEN p_screen.
    ENDFORM.                    "ZJNC_DUMP_GRID
    SAMPLE TEST PROGRAM
    REPORT yjnc1.
    INCLUDE zjncinclude.
    TYPES : BEGIN OF ty_pur,
              ebeln1  TYPE ekko-ebeln,
              aedat   TYPE ekko-aedat,
              ebelp   TYPE ekpo-ebelp,
              matnr   TYPE ekpo-matnr,
              txz01   TYPE ekpo-txz01,
              menge1  TYPE ekpo-menge,
              belnr1  TYPE ekbe-belnr,
              budat1  TYPE ekbe-budat,
              bwart   TYPE ekbe-bwart,
              menge2  TYPE ekbe-menge,
              belnr2  TYPE ekbz-belnr,
              budat2  TYPE ekbz-budat,
              menge3  TYPE ekbz-menge,
              dmbtr   TYPE ekbz-dmbtr,
              buzei   TYPE ekbz-buzei,
              jnc1    TYPE sy-datum,
              jnc2    TYPE i,
              jnc3(4) TYPE c,
            END OF ty_pur.
    DATA: it_pur TYPE STANDARD TABLE OF ty_pur,
          wa_pur TYPE ty_pur,
          rows   TYPE i.
    Not Recommended Style but still used!
    DATA: BEGIN OF it_mat OCCURS 0,
            jnc1    TYPE sy-datum,
            matnr   LIKE makt-matnr,
            jnc2    TYPE i,
            maktx   LIKE makt-maktx,
            mtart   TYPE mara-mtart,
            jnc3(4) TYPE c,
         END OF it_mat.
    DATA: BEGIN OF it_str OCCURS 0.
            INCLUDE STRUCTURE makt.
    DATA: END OF it_str.
    SELECTION-SCREEN BEGIN OF SCREEN 1001.
    SELECTION-SCREEN END   OF SCREEN 1001.
    START-OF-SELECTION.
      MOVE     100 TO rows.
      SELECT ekko~ebeln
             ekko~aedat
             ekpo~ebelp
             ekpo~matnr
             ekpo~txz01
             ekpo~menge
             ekbe~belnr
             ekbe~budat
             ekbe~bwart
             ekbe~menge
             ekbz~belnr
             ekbz~budat
             ekbz~menge
             ekbz~dmbtr
             ekbz~buzei
        INTO TABLE it_pur
        UP TO rows ROWS
        FROM ekko
             INNER JOIN ekpo
             ON  ekkoebeln = ekpoebeln
             AND ekpo~loekz = ' '
                INNER JOIN ekbe
                ON  ekpoebeln = ekbeebeln
                AND ekpoebelp = ekbeebelp
                AND ekbe~bewtp = 'E'
             LEFT OUTER JOIN ekbz
             ON  ekpoebeln = ekbzebeln
             AND ekpoebelp = ekbzebelp
             AND ekbz~bewtp = 'M'
       WHERE ekko~bstyp = 'F'
         AND ekko~loekz = ' '
       ORDER BY ekko~ebeln
                ekpo~ebelp.
      LOOP AT it_pur INTO wa_pur.
        COMPUTE wa_pur-jnc1 =  sy-datum - sy-tabix.
        MOVE sy-tabix TO wa_pur-jnc2.
        MOVE 'Helo'   TO wa_pur-jnc3.
        MODIFY it_pur FROM wa_pur.
      ENDLOOP.
    PERFORM zjnc_dump_grid  USING 'IT_PUR' 'WA_PUR' 1001 'Purchase
    Report'.
    IT_PUR is as per recommended OO style
      PERFORM zjnc_dump_list  USING 'IT_PUR' 'WA_PUR' 'Purchase Dump'.
      SELECT makt~matnr
             makt~maktx
             mara~mtart
        INTO CORRESPONDING FIELDS OF TABLE it_mat
        UP TO rows ROWS
        FROM mara INNER JOIN makt
             ON maktmatnr = maramatnr
             AND makt~spras = sy-langu.
      LOOP AT it_mat.
        COMPUTE it_mat-jnc1 =  sy-datum - sy-tabix.
        MOVE sy-tabix TO it_mat-jnc2.
        MOVE 'Helo'   TO it_mat-jnc3.
        MODIFY it_mat.
      ENDLOOP.
    PERFORM zjnc_dump_grid  USING 'IT_MAT[]' 'IT_MAT' 1001 'Material
    Dump'.
    Note that IT_MAT with Header line is 2 in 1
    IT_MAT[] is the table object and IT_MAT is the header work area
      PERFORM zjnc_dump_list  USING 'IT_MAT[]' 'IT_MAT' 'Material Dump'.
      SELECT *
        INTO TABLE it_str
        UP TO rows ROWS
        FROM makt
       WHERE makt~spras = sy-langu.
    Note that IT_STR with Header line is 2 in 1
    IT_STR[] is the table object and IT_STR is the header work area
    As FORM zjnc_dump_list uses RTTI there is no special case for
    Structures
      PERFORM zjnc_dump_list  USING 'IT_STR[]' 'IT_STR' 'Structure Dump'
    thanks
    mrutyun^

  • HT204266 How do I retrieve a lost iphone with the Find My Iphone app?

    How do I retrieve a lost iphone with the Find My Iphone app?
    I got my iphone stolen right out of my bag and I am assuming there is no way of retrieving the phone back unless I have the Find My Iphone app? I am hoping someone could prove me wrong or give me another solution to getting it back. I have a lot of photos, videos and memories in that phone and I would do anything to get it back. Please help!

    "I got my iphone stolen right out of my bag and I am assuming there is no way of retrieving the phone back unless I have the Find My Iphone app?"
    It is not an app.  It is a feature of icloud and iphone.  Did you set it up on the iphone itself BEFORE it was stolen?  If not, then you cannot track it at all.
    Change your passwords and report it to the police.

  • Lost part of my library after latest update, how do I retrieve?

    I lost part of my library after the latest update, how do I retrieve my lost music?

    Use your backup copy of your computer.

  • Lost part of Printer connection using a WRT600n

    I have a WRT600N router and have lost part on my printer connections.  My PC desktop(XP PRO) is connected using a WUSB600N, my MAC laptop is connect via wireless and my iMac is connected via Cat6 cable. The network printer is connected to the WRT600N via cat5 cable.  Here is my problem - my Windows destop PC cannot print, my MAC laptop prints only using the MAC side, connot print via VM/Windows(XP PRO) and the same holds true for the iMac.  Everything worked fine until I had a power outage, when everything re-booted thats when the problem started.

    Remove and Add Printer again...Check if the trick works...

  • HT1414 Hi All, i recently done a back up and update & restore, but ive lost my notes, my text messages and my reminders and notes on the calender, i also have lost the data i had in an app which was very important to me. Please Please help me,  i,m total

    Hi All, i recently done a back up and update & restore, but ive lost my notes, my text messages and my reminders and notes on the calender, i also have lost the data i had in an app which was very important to me. Please Please help me,  i,m total novice.
    I did this back up because i was instructed by my service provider. This was supposed to sort out my losing connection problem, which it didn't, it instead gave me a new problem. If there is anyone out there who can help me to retrieve my lost information i would appreciate it.
    Thank You in advance.

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

Maybe you are looking for