Lost power during bios flash for 760GM-P23 (FX) please help!!
hi all,
I was doing some updates to my bios and the power went off for the whole street and now the monitor wont boot is this because of the corrupted bios or something else?
This one:
Quote
For AMI BIOS
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer.
If you don't have floppy you can try place it over USB key instead to see if that will works
Similar Messages
-
BIOS flash for Satellite A20-S103 needed
Hello,
I need a BIOS flash for a Toshiba Satellite A20-S103 notebook. I already downloaded the one on the download site.
But this one i can not use because i need windows to be installed. And that is just the problem.
I can not install windows because the BIOS is not fully ACPI compliant.
The BIOS version on the laptop is V1.10.
To update i need a dos version to flash the bios.
Is it possible to get a bios update which is written for dos?
Thanks a lot,
Jeani did Have same problem. found nice resolve on it
Satellite A200 (PSAE2), all partitions killed (include hidden) so i can't use BIOS (windows based) update :-(((
aim = win XP SP2
steps:
1) Win XP disk in CD, scsi drivers ICH8M_32bit on USB FDD (Mitsumi btw) attached to notebook.
2) booting from CD. F6. When windows installator found ICH8M_32bit drivers. I am creating disk C: (NTFS)
3) He begins to copy temp installations files. During this procedure it says what it couldn't copy all files from usb FDD to HDD. It says to me what i will have problems in sucesfully complete installation. In spite of that installator succesfully transfering windows files onto C:
4) First planned reboot. I see blue death screen. End? Not so soon!
5) i have begin new installation. Again give to installator ICH8M_32bit drivers from usb fdd disc.
6) i choosed "leave current NTFS on C: without changes".
7) This time all drivers from fdd disk has been transfered succesfully.
8) After reboot installation of Win XP completed succesfully!!!
Sorry for my unnative English -
Hi
I have a question about BIOS flashing for the KT4-Ultra FISR board. I currently have version 1.1 of the BIOS and was told that I need at least 1.2 to recognize my AthlonXP 2500+ correctly. (It currently shows as a 1.1Ghz athlon with the FSB set to 100MHz * 11 multiplier)
Is it worth moving up to 1.3 or 1.4 instead of just 1.2?
Thanks
KT4-Ultra FISR (MS6590 v1.1)
AthlonXP 2500+ (barton)
Zalman Copper flower heatsink
512 MB DDR333 RAM
Powercolor Radeon 9700 Pro
Antec Soho 1080 case (430W truepower supply)I would have to guess BIOS may make a difference. Although XP2200+ and XP2500+ Barton both run at 1.83GHz, the BIOS may be confused as to the processor type if the Barton was released after the initial BIOS version. Only 2700+ and 2800+ were 333 FSB at the time of BIOS release maybe... then again, I am a useless tech... just a guess is all I have to offer.
-
My dad got me a MacBook Air for my birthday but he used it a few times before he gave it to me. He doesnt remember the user password that he kept and now i cant download adobe flash player in it. Please help me!
Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
I don't remember my original (former) account password
https://support.apple.com/kb/HT1631 -
My iPhone 4S screen flash all the time. Like if its locked it turns on. I think some notification pop for some msc. Please HELP!
Basics from the manual are restart, reset, restore.
Have you tried each of these? -
I work on the CompactRIO 9068 that the password is lost for some time.
Please help me to reset it, for finish my end of study project.
Thank you,but the page of ni support does not work:
https://sine.ni.com/srm/app/newrequest
and I have the recovery.cfg file from NI with this steps :
1. Copy the recovery.cfg file, found in the zip folder attached at the bottom of the email, to the thumb drive.
2. With the cRIO device powered off, plug in the USB drive to the controller.
3. Hold down the reset button while powering on the controller. Continue holding the reset button until the status light turns on, then release the reset button.
4. Wait for the controller to boot. This should take less than a minute.
5. Check that the password has been reset to the default. (you will still be prompted for a password even if the default is blank)
6. Reinstall software to the controller. Using the USB reset will leave the system in a state where it is unable to run LVRT
I have followed the procedure as mentioned
Result: the LED "Status" is permanently blinking.
Would you please provide as with another alternative so that we can fix this issue. -
I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!
The friend who sold it to you needed to clear his Apple ID off the phone before he sold it to you. Of course if it wasn't his phone in the first place then he could not do so. He is your friend but you don't know where he is?
There is nothing that will help you short of getting the password for the Apple ID from your friend. If you cannot obtain that there is no workaround. -
My ios is upgrade to 7.0.2, but I forget my power-on password， so the iphone is disabled and I can't use it now except for emergrncy call. Please help me...
I tried this way , but I forgot my e-mail address too !
and I dont have any idea to re-active my iPhone5 ..
sombody help me . -
My iTunes won't open! It keeps saying 'The iTunes Library.itl is locked on a locked disk or you not have write permission for this file.' Please Help!
this may happen on external drives if:
The external drive was hotpluged (removed) without going the correct "eject" way
The iTunes library (database) got corrupted
First Aid for external drive
Close iTunes
Unmount (eject) external drive the right way.
Mount drive again
Go to Workplace -> right click external drive -> choose "clean up" This will force the filesystem to rescan the file structure of the drive and rebuilding the file system table and journaling file.
After the tool shows "done" (could last some time depending on size of drive) restart iTunes
If your iTunes library is on your internal drive, this may happen
The system was not shoot down correct, e.g. "pulled the plug"
The iTunes library (database) got corrupted
First Aid for internal hard drive
Close iTunes
Reboot system
Go to Workplace -> right click external drive -> choose "clean up"
After the tool shows "done" (could last some time depending on size of drive)
Reboot system, restart iTunes
If none of the above fixes your problem, post here.
Lupunus -
Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help. -
I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks
Erdygirl please be aware you are posting to a public forum. I have removed your personal information from your previous post.
Please check your account at http://www.adobe.com/ to locate your serial number. You can find more information on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html. -
after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm
Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden -
Been stuck for over a year, please help me do this
so i have this laptop with 8gb ram and core i7 as well as 2 hdd (no raid).
Now i heard about premiere (cs4) and my laptop is ready to take most of the advantage but the hard drive is the bootleneck.
Basically, all i want is to do few cuts in a video that was filmed by sony hdr-sr11 camcoder in hd 1080 60i settings. Now i heard i need 3 hard drives etc, but at the moment, i only have 2.
So is there anyway i can do simple cuts in premiere without losing any quality and slowdown in fps or is there any other software that can be better? I really don't want to lose any quality or fps with the g73jh-a2 asus laptop i have?
i also have ati 5870 video cardThe lowest was 19mb, but was floating arond 30mb. Still that aint good..
I can't afford the partition magic and i heard its not good to partition after installing windows. I am thinking of fresh install, but if there is a workaround, it would save me tons of time as not installing apps etc.
For the setup
1)Can i have the programs in secondary drive? What about just a game or 2?
2)By projects, do you mean the videos that im going to edit?
3)what is scratch?
4) By media, do you mean videos im going to edit?
Lastly, what about a bit of data? Like <50gb.. Pictures documents etc
Like, truly anonymous
Date: Fri, 30 Apr 2010 17:16:10 -0600
From: [email protected]
To: [email protected]
Subject: been stuck for over a year, please help me do this
i did hdtune and was the os drive was 100mb-19mb in the end and the
secondary one was 105-45~mbps
Those figures are disturbing. For any reasonably modern 7200 RPM disk these figures should be around 120 - 60 MB/s. If it goes down to below 20, something is seriously wrong. Now that may be caused by your partitioning or something else, hard to discern from here, but these results are worrisome.
Maybe Partition Magic can help you get rid of all these partitions, otherwise a complete reformat and fresh install of OS & programs is all that is left.
Setup should be something like this:
C: OS & programs & projects
D: Pagefile, scratch and media
It depends a bit on the nature of your projects, your workflow, but in general you set up your disks in such a way that disk accesses are spread over the available disks as much as possible.
> -
I must find my find my iphone data for last 1 year please help me
i must find my find my iphone data for last 1 year please help me
I confirmed, I have turned on " find my iphone. Here is the error I encountered
-
i try to do several times... to recovery my ipad 2 wifi...but it gone off mode..what i must do.. i'm university student ..i need my ipad for tomorrow lecture..please help me
What version of ios do you have?
See Texas Mac Man's write up here.
My iPad won't connect to my home wifi - even though it has previously worked fine. It says it is unable to connect? - any ideas
Maybe you are looking for
-
How to find out what is using the native heap of a process running a JVM?
Hello, I am not sure where to post this question so I am starting here. I am troubleshooting a Java application using some native calls (32 bits Java running on Solaris 10). The size of the process (as reported by prstat) is slowly increasing day aft
-
HT1947 how can i watch itv on my apple tv via my iPad
I have just purchsed an Apple TV, I have it all up and running........... but I cant watch tv programmes from itv bbc or any other media. I was told on the phone I could do this. What am I missing?
-
Microsoft wireless multimedia keyboard 1.1 and mouse
Can one mix and match different key board and mouse with a different receiver. Original has been lost. If so how does one align the frequencies so all parts are recognized.
-
An easy question about GET_ITEM_PROPERTY
Hello friends at www.oracle.com , how can I obtain the item's initial value by using GET_ITEM_PROPERTY built-in? I couldn't find it even at Oracle documentation. Best regards, Franklin Gongalves Jr.
-
I am switching from Windows XP to MAC OS X 10.6.2 . I am using a HP 1610 printer. I used this printer on Windows for years. I have the following issue with MAC when printing to this printer. The bottom margin of the A4 pagesize (portrait orientation)