Lost project replaced with new one?

I have a project that was finished with the exception of minor tweaking. It was saved. I was going to go back later and finish. A few days later I started pulling clips for a new project in a completely different project. (and saved them)
Now when i go back to the first saved project the clips from the new one are in that timeline! Arrgh! I really don't want to have to re do that whole project and I really don't understand how this happened in the first place. BTW the second project is still in tack where it should be too. So it is now in 2 places, but I can't find the first one.
Has this happened to anyone before? Can anyone make any sense out of this?
Thanks!
ruez

What version of PPRO are you running?
Does the content for the two projects have the same filenames (like C0000.ext, C0001.ext, etc.)?
Have you moved the content used in the first project?
At any point when you opened the first project, has PPRO prompted you to relink to the media?
While user error seems like the most likely scenario, if you're running PPRO CC (7.0), I'm thinking there's a possibility that Relink could have mapped to the wrong body of clips.
Even if my hypothesis is bogus, a solution could be to make all the content in the first project offline, then relink it to the correct content. If, that is, the sequence in the first project reflects your edits from that project rather than the second on, which is not clear to me from your post.

Similar Messages

  • Where can I find 24"  ATI RADEON HD 4850 video card or if there is one compereble to it or dose Aple  replaces with new one, because ATI RADEON HD 2600  is deffective and APPLE dose free replacment. Thanks

    Where can I find 24"  ATI RADEON HD 4850 video card or if there is one compereble to it or does  Aple  replaces with new one, because ATI RADEON HD 2600  has been recognised as deffective by Apple and APPLE  replaces for free. Thanks

    http://www.amd.com/us/products/notebook/graphics/Pages/notebook-graphics.aspx is a starting point.

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • How to install OS X  after HDD was replaced with new one?

    Hi folks,
    I got new 500G HDD in my mac. After i have started it with C pressed selected <Use English as the main language> Then <Welcome to Mac Installer> Then <Software License Agreement> Then<Select a Destination> but there is nothing to select, there is no destination volume at all.
    Could some one tell me what i need to do to install OS X.
    Thanks

    Hi mosaicto, and a warm welcome to the forums!
    Most drives come MS-Dos, we need HFS+ to install AND GUID Partitioning if an IntelMac.
    How to format your disks...
    http://www.kenstone.net/fcphomepage/partitioningtiger.html
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the Erase tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Highlight the drive, select Erase Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to install.

  • Office Jet 8600 Pro gives repeated message of depleted ink after replacement with new ones

    My OfficeJet 8600 Pro (n911a?) gives a repeated message of depleted ink levels (Cyan and Yellow) even after I have replaced them with genuine HP 951 ink cartridges. I am certain that I have installed them correctly (I have done this in the past with no problems) and I have turned the machine off and on again several times. I have checked firmware and software updates and it appears that everything is up to date. Any other thoughts?
    Thanks.

    Hello hdanderson & TanaN,
    Understand that you guys are having the issue with cartridge after replacing it.
    Firstly, I would like you to follow this Trouble Shooting Guide.
    If this doesn't solve the problem, I would like you to call HP Support.Please refer to the below link to get the support number for your region.
    http://h10025.www1.hp.com/ewfrf/wc/supportLanding?​cc=us&lc=en
    Please let me know how it goes.
    Thanks,
    Bryan
    *I am an HP employee*
    ** Please click "Accept as Solution" if it solved your problem, so others can find it **
    ***Give Kudos to say "Thanks" by clicking on the thumbs up button under my name***

  • Old macbook replaced with new one, still have old hard drive.

    I have the old hard drive from my non functioning 3 year old white macbook. Today I have a new white macbook complements of extended warranty. I tried swapping the old drive with the new, but it entered into a boot up loop. It chimes, sits there on the grey screen, then reboots. I'm assuming this is due to upgraded hardware in the new macbook being incompatible with OSX Tiger on the old drive.
    So is it possible to put the old drive into an external drive case and run the migration assistant to transfer all the settings, apps, etc across? Is there another way I can make the old drive work with the the new macbook? Thought I might ask before I start shelling out for an external drive case or paying the apple repair store to transfer my data.
    Thanks,
    Warren.

    Yes you could install it into an external drive case. (They are not that expensive).
    Yes, you could reformat the drive GUID partition and install your OS on it.

  • Can't use hard drive after replacing with new one

    Disk Utility showed failed hard drive so a new Seagate ATA-100 160G was installed. I did the Erase and Journaling of the new HD. I went back to the installer to install OS10.3 and the HD now shows in the window for the destination volume. The problem is it shows an explamation point over the HD icon and if you select it the window says cannot install OSX on this volume. I placed the jumpers on the new HD exactly as the old HD had them.
    What am I doing wrong?

    I placed the jumpers on the new HD exactly as the old HD had them.
    Jumpers vary by manufacturer and model. If you copied the jumper positions, and not their meanings, it will not work.
    You need to place the jumpers to set the drive to Master, but use the diagram on the new drive (not the jumpers on the old drive) as your reference.
    I apologize in advance if you have, in fact, copied the sense of the jumpers rather than their positions.

  • Replace playing video with new one in osmf player

    Hi,
    I have a problem with loading new video in osmf player. First video is loaded from the emmbed code, and I use ProxyElement to comunicate with MediaLEment and to load my plugin. But after some actions in my plugin I need to load another video in the Player. By changing the DisplayedObject from the proxiedElement I am loading the new video but the old video from emmbed code is still runing on the back. Does anyone know how to remove mediaElement created by the player or to replace with new one, ot at least to disable that video from playing. I tried with everything and it doesn't work.
    Thanks

    hi,
    you can change into new Data Source.
    From new Data Source you can load data into the old ods.
    but if you want to kepp the old records as it is, then don't delete data in the ods.
    hope this helps......
    Rag
    Pra

  • I had my iphone 4 stolen, replaced with new iphone 4 had all my info that was on cloud downloaded to new phone.  Next day all that info dissappeared from new phone. Is there a way to recover info??

    I had my iphone 4 stolen, replaced with new one same day and downloaded info saved to the cloud.  The next day all that info disappeared and have not been able to get any of the old info back.  Is there a way to get this info.

    I think you will have to do a complete restore--you will lose any info added since last backup.  Connect phone to computer, select it in souce list.  Next, click on Summary tab, click Restore.  In the next dialog box, click Restore--your phone will be erased and the latest software will be installed.  Click agree to terms and phone will restart.  Then you will see the phone setup screen--click on Restore from Backup and select the most recent backup.  Obviously, this will only work if you have a backup on the computer.  If not, check Set up as New Phone, click continue, then wait for the process to finish.

  • After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

    The best thing to do would be to start over. Use Setup Assistant this time.
    Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
    Using Setup Assistant
    Don't transfer the Guest account, if it was enabled on the old system.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

  • HT4993 Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

    Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

    If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Replaced my hardrive with new one. but when i turn the computer on, the hardrive doesnt show. pls help.

    Replaced my hardrive with new one. but when i turn the computer on, the hardrive doesnt show. pls help

    Before installing a new drive - it is generally better to install it in a external usb enclosure and connect it to your Macbook so you can format/erase the new drive and make an exact clone of the drive you wish to install, unless you plan on doing a clean install.

  • How can I exchange all the images in a slide show with new ones

    I have 18 slide shows each is a different competition for our camera club. How can I exchange all the images from each slide show with new images as our club competitions commence? I am reluctant to just delete the slide show because I will have set it all back up. I want to leave the size shape and format of the show as is, but just exchange all of the current images with new ones. I am hoping there is a quick way to delete and replace all images for each show? Each slide show has around 40 images and I have 18 shows
    thank you for your help

    1. Activate "thumbnails" in the configuration panel
    2. Select one Thumbnail.
    3. Rightclick and choose "Select same"
    4. Press "backspace"
    5. Open the configuration panel and load the new images.

  • Library files files are replaced with new files

    Almost everyday, when i start iTunes my library files are replaced with new files & then i need to replce the new ones with my backup set

    There are a couple of recommended methods for using more than one iPod on a single computer. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one.
    Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. Have a look at this article and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
    Another option when using a single library is to set one or both of the iPods to manual update: Managing content manually on iPod
    Choosing the update option "automatically update selected playlists only" (called Sync Music - Selected playlists in iTunes 7) allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes

  • IPhone 4 won't slide to unlock . I tried everything possible and even got my phone replaced fora new one costing me 10,282 Rupees . The new phone is again having the same problem even without adding any apps or taking data backup

    iPhone 4 won't slide to unlock . I tried everything possible and even got my phone replaced fora new one costing me 10,282 Rupees . The new phone is again having the same problem even without adding any apps or taking data backup

    Yeah, first my thought was also that... that's why I've gone to Apple and they already switched the phone twice!!!
    Last time was yesterday... I posted this here because I came from Apple and with a new iPhone 5, although I didn't restore anything from iCloud, I hadn't even logged in to iCloud / AppStore, and without any event on the lockscreen my iPhone 5 was already "locked" on the unlock screen... after a mere 45m after I used it without a single App!! Just a couple of SMS / 1 or 2 calls... I'm going to Apple again on monday, but tried to post here to see if this has happened before to anyone with 3 new iPhones!!!

Maybe you are looking for