Lost proxies

I have been using the organizer for a while now and by and large have been quite happy with it (although it would benefit from a check out feature) my problem is this. I have been archiving my older photos as I go along and have a large collection of optical disks. However, I suffered a hard drive failure last year and lost my proxies (my live images are on a separate drive.) I thought I might be able to recreate the proxies by trying to load the optical disks but leaving the images off line. That doesn't seem to work. When I try to fix it using the reconnect feature it doesn't let me go to the optical disks. Ideas???

>I thought I might be able to recreate the proxies by trying to load the optical disks but leaving the images off line. That doesn't seem to work. When I try to fix it using the reconnect feature it doesn't let me go to the optical disks. Ideas???
Read this FAQ which will explain where the proxies reside and how you would reconnect if you had your proxy files
http://www.adobeforums.com/cgi-bin/webx/.3bbd1bc3
Using that information, here is one idea that you might try. It is based on temporarily using a new different catalog to get the proxies built and then copying those proxies over to the folder structure for your regular catalog. I can't say for sure if it will work because I wrote this process based on known information, but I have not actually done it.
First
b make a copy of your current catalog (.psa file) and its folder structure under Catalog Folders
See the FAQ for complete default folder paths. Then if something goes wrong in this process you have a good copy of your current catalog and its related folders.
- make a new catalog (just for use in this process) File > Catalog > New
- after you have made the new catalog, it will stay as the active catalog
- using this new catalog, pick one of your discs as a test; use that disc and do a Get Photos with the
b leave files offline box checked
. This should now create proxies for this new catalog. Verify the existence of the proxy files using the folder information info in the FAQ.
- do a File > Catalog > Open to open your regular catalog again.
If your regular catalog is not in the PSE default location, you won't see it in the initial list so you should navigate to the folder where it resides. You will not see the proxies for this catalog yet.
- Close down Photoshop Elements
- Using Windows Explorer and the folder structure information in that FAQ copy the proxy files that were just created for your new catalog
to the same place under the Catalog Folders structure for your regular catalog
- Start Photoshop Elements and follow the instructions in that FAQ to reconnect to the proxies.
Good luck and please do post your results back to the forum.

Similar Messages

AIM - connection with host unexpectedly lost

When I am using my school's wireless internet, I can log onto iChat for about a minute, and then it logs off and says "Lost Connection with AIM. The connection with the host was unexpectedly lost."
If I stay on the iChat window it stays logged on, but if I bring another application to the front of the screen it eventually logs off.
I also cannot use video chat.
I found a similar thread that said to use port 443, which I am currently using.
It does the same thing even if I am logged in to my .mac account. However, Adium works and everything works fine when I am at home or somewhere else. As far as I know, my proxy information for my school's wireless is correctly entered in.

Hi,
Welcome to the  Discussion Pages
iChat is very sensitive to Proxies.
In fact I would say it does not like them at all based on the posts in these forums. Many people report they can not get it to work with a proxy whether it is listed in the iChat > Preferences > Accounts > Server Settings or in the System Preferences > Network.
I don not use Proxies and still find at some points iChat does not seem to be able to stay logged in.
I never use another client long enough to provide a comparison.
iChat gets constant feedback from the AIM servers to keep the Buddy List updated. More so than a Minute check setting by Mail - so I can not see it is any time-out limit on the proxy.
Isn't iChat using port 1080 for the Proxy ? (or whatever your Proxy uses )
10:49 PM Wednesday; April 2, 2008

MacBook wifi signal lost.

Hello ,
I have a problem with my wifi signal. I have an Macbook 1,1 , and the Airport Card is Airport Extreme.
The problem is that i keep losing my wifi signal. It happens every where. I can keep being connected to wifi about an hour then the signal is lost. If i try to reconnect it says that the connection timeout. Sometimes it happens after 5 minutes sometimes in an hour. i have found only one place where i can stay connected for ever.
Also i have found that if i use the Assist me option on reconnecting then i get the wrong password error, although the password is correct. At the moment i am at home my own Macbook can't connect to wifi, but my friend ibook is working fine. So if anyone has an idea how to fix this problem please let me know. I have been in contact with my local apple care company but they don't have the will or knowledge to help me.

... but they dont show up when it scans even tho they do show up on the macbook.
That would appear to point to a problem with the built-in AirPort Extreme card in the iMac. Either it is not configured properly or there is something physically wrong with it.
Let's double-check its configuration:
System Preferences > Network > AirPort
o Location: Automatic
o In the left column, verify that an AirPort option exists. If it does not, click "+" to create one. (Note: If you are unable to create an AirPort configuration, the AirPort card in your computer either doesn't exist or it is not recognized.)
o Verify that AirPort is "On." Click "Turn AirPort On" button if not.
o Ask to join new networks: (enabled)
o Show AirPort status in menu bar: (enabled)
Systems Preferences > Network > AirPort > Advanced
AirPort tab
o Remember any network this computer has joined: (enabled)
o Disconnect from wireless networks when logging out: (enabled)
o Require Administrator password to control AirPort: (disabled)
TCP/IP tab
o Configure IPv4: Using DHCP
o Configure IPv6: Automatically
DNS tab
o DNS Servers: <if required, add your desired DNS server IP address(es) here>
o Search Domains: <if required, add your desired DNS Search Domain(s) here>
WINS tab
o Enter desired WINS info or leave the defaults
AppleTalk tab
o Make AppleTalk Active: (disabled)
802.11X tab
o Enter desired 802.11X info or leave the defaults
Proxies tab
o Enter the desired Proxies info or leave the defaults

Lost connection to DRM Application

Hi,
We are seeing the below DRM error in windows event viewer logs,
ERROR Oracle.Drm.Client.DrmEventHandler [(null)] - Lost connection to DRM Application: XXX
System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.
Server stack trace:
at System.ServiceModel.Channels.CommunicationObject.ThrowIfDisposedOrNotOpen()
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Oracle.Drm.ProcessManager.IProcessManager.GetProcessMgrID()
at Oracle.Drm.ServiceReferences.ProcessManagerControllerClient.GetProcessMgrID()
at Oracle.Drm.Client.DrmEventHandler.ThreadStart()
Can you please let us know what exactly is causing this
Thanks

Hi,
We are facing the same issue in our 11.1.2.3 environment. Was there any solution at all please ?
Thanks,
Manju.

Huawei E173 mobile broadband modem install - lost access to Internet

A few days ago I purchased the Huawei E173 mobile broadband USB modem ("Internet Stick") with SIMcard from Tchibo; they use the 3G+ network (HSPA/UMTS) from O2 in Germany. I installed the modem with its "Mobile Partner" GUI in WinXP/SP3 on my Asus EeePC 1001R netbook and in WinXP/SP3 on a Dell Inspiron 6400 laptop and also installed the modem in Arch on the Dell laptop.
For the Arch install I followed the section "Easy Install using Network Manager" in the Archwiki "Huawei E220"; that was all that was needed, using NetworkManager, modemmanager and the Gnome network-manager-applet (nm-applet).
All went well: I successively and successfully used the modem and got on the net in WinXP on the netbook, then on WinXP on the laptop and finally in Arch on the laptop. Then I tried to use it again in WinXP on the Asus netbook: no access to the Internet. Tried it again in Arch: no access. Tried it again in WinXP on the Dell: no access.
The symptoms were the same in all three cases: when the stick was inserted, the OS recognized it, it asked for and accepted the SIMcard PIN#, established a link with the ISP access point - with excellent signal strength -, I was given an IP address in the 10.xx.xx.xx range, and according to the stick's LED, the connection alternated between being on an UMTS and HSPA net. But no Internet access, neither in Firefox nor Chromium nor Opera, with and without firewalls or system proxies! I was able to ping my own IP address but not the IP addresses of the standard gateway, DHCP server, and DNS servers, and some of these addresses were peculiar (I can provide more info on that). And no luck pinging Google or Amazon, either with their hostnames or IP addresses.
A support call to Tchibo confirmed that there was no O2 net service outage in my area, that signal coverage ought to be excellent in my area, incl. for an HSPA connection, that my new account was active and in good order, there was no block on it and there was plenty of high-speed data capacity left in it.
So I exchanged the stick. So far I've installed the new stick/SIMcard only in WinXP on the Asus netbook, with new cellphone # and PIN. And everything is fine again; I'm back on the internet.
I don't want to be confined to browsing in Windows; Arch is where I do all my work and that's where I want to access the Internet as well. But for nothing in the world do I want to go again through the ordeal of being completely locked out of the Internet and trying to troubleshoot this problem without access to it. But I'm leery of using the new stick in Arch again and again experiencing the same lockout; I need to know what the cause of this problem was.
I see several possibilities:
1. Hardware failure of the first Huawei stick.
2. Some network config setting might have gotten corrupted in going through two Windows and then the Linux install.
3. Some account or network settings on the ISP side might have gotten corrupted.
Re 1: Seems highly unlikely to me; the stick I returned worked flawlessly for 24 hrs. and is probably still perfectly all right.
Re 2: Are such config settings stored on the SIM chip or elsewhere in the data storage section of the stick, so that they an incompatible setting might be carried over from one OS or install to another?
Re 3: Tchibo already seem to have gotten confused over the uses of the stick in my two Windows installs. When I installed it in WinXP on the Dell (after having installed it in WinXP on the Asus netbook), the data volume counter was reset, and they again started counting KB's from zero in the Dell WinXP install, but kept track of usage from the Asus install separately, in spite of the fact that there was only one account with them, and account identifiers such as cellphone # and SIMcard PIN# were identical in the two cases. Further, they don't officially support Linux; perhaps their software got totally confused by the usage coming from NetManager in Linux. But one would think that this stick would be completely portable from machine to machine and from OS to OS, just like a USB WLAN adapter.
Any thoughts about the cause of these problems, whether they might reoccur if I use the new stick in Arch, and how I can get around them?

orschiro wrote:
Sorry that I didn't read through your whole bunch of text but you may consider trying the sakis3g all in one script.
https://wiki.archlinux.org/index.php/US … em#sakis3g
Regards
Thanks for the tip. I'm very leery though of trying to use the new stick in Linux until I know exactly what caused the problem before because with the first stick it was after I'd used it in Linux (just once) that I lost internet connectivity in all three systems. If that happens again, I'd be in the same hole as before: trying to troubleshoot a potentially complicated networking problem without access to the Internet. Short of an expensive call to customer support of doubtful outcome that could cost me the price of the stick (not toll-free; costs 0.42 EUR/min), the only way out then may be to return the stick again and again set up a new account. I doubt, they will go along with that.
Setting up the stick in Arch was actually the easiest thing. After I'd installed networkmanager, modemmanager, nm-applet and some other bits (such as mobile-broadband-provider-info), it was all plug-and-play, and with these bits of software Arch automatically set up a mobile broadband connection to the ISP's server and I had an excellent Internet connection. Only after I went back into WinXP, did I lose all Internet connectivity in all three systems, even though I still got a good link to the AP (persistent misconfiguration of GW, route, subnet mask, etc?).

Proxies Missing and Full scans not working

We had some major issues upgrading our Facilis shared storage to 'multi-user write' and in the process we lost all the proxy files/thumbnails for any video that was NOT stored in a archive device in FCSvr.
Now the Facilis is stabilized - but I am left will 20,000 plus video flies that I need to recreate proxies/thumnails for. Any of the video that was stored on archive devices in FCSvr still has all the proxy files/thumbnails intact.
So - I think I need to run a full scan on my edit-in-place device that has all the clips with missing proxy files? But this is not working. I keep getting:
"ERROR: E_INVAL pm_transcoder ..."
I can add new media to FCSvr with no problem - proxies and thumbnails get generated. But I can not seem to figure out how to make a full scan work. It tries three files - they all immediately fail and the full scan stops.
Any help would be greatly appreciated!

In the process of making the changes you made, did any paths change? If the device paths changed at all, you could have trouble if you don't change the device in FCSvr too.
Also, Did you bring FCSvr down before you started the upgrade? If FCSvr was running and tried to access the device while it was not mounted, specifically if it tried to write to either the shared storage device or the proxy device while it was unavailable to FCSvr, it may have created a "phantom device" in the /Volumes folder. I've had this problem several times. Try this - using Terminal on the FCSvr machine, cd to /Volumes. Does everything look normal there?

Final Cut ProX Users - Lets get this thing working

I was with FCP from day one. Adobe Premiere was always breaking and needed fixing every month so I jumped ship.
I did not move from FCP 6.06 to 7 as I had a funny feeling that something was afoot. So I waited.
Now, I have a copy of FCPX I am am going to see in the next few days just how broken it is. I would suggest that if you have persevered and like me, cannot resist a challenge and decided to give it a go.
Hang in there and use this post to flag up any ideas, fixes or for those things you just cannot work out.
So here goes:
Before firing up X create a 'test' folder on your external RAID. Because that is where we keep our projects and media ...don't we?
Drop into this test folder copies of differing media and file formats. I have unwrapped XDCAM, P2, pngs, aifs NTSC and PAL media. Anything you can think of.
Be sure to give all your test footage and files names that relate to the format. ie XDCAM 720p 50 PAL. You may need to use Spotlight to track down lost content.
It is important you do this so as to keep the first trial of X as simple as possible. You need to know exactly where all your media is coming from and going to to.
Open X and explore the preferences first.
Open the import dialog explore all your options on this. This is where you will be able to send an (event) project and set up how and where referenced media is located. Don't rush it.
Don't Panic
Note:
Once downloaded X will appear to wipe out 7.
If you try to open a 7 project it will get a message 'no app' right click and use open with.
Quit X first.
7 project will work just fine.

please post this in the Final Cut ProX forum where you will receive a reply.
FCPX it is a completly different application as this is the to the Final Cut Studio version
Final Cut Pro X Discussion

Lost the ability to spell check on all applications

I recently updated my system to Mavericks 10.9.4, since then I have lost the ability for spell checking in all applications. Check spelling while I type is not working and I am unable to check spelling manually through the app menus. Skype, Facebook, Notepad.. you name it, spelling correction functionality is no bueno. Has anyone ever heard of this? I have tried changing languages, booting in safe mode... the only thing I did notice was that the box to check "correct spelling automatically" won't stay checked, but clearly something else is wrong.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

The codition type of free goods lost.

We are facing a problem about the codition type of free goods.
Our business flow is:
1:customer order 100 DR material A from CRM.he entered the requited number in item 1.
2:we transferred the order into r/3 system.and we define the free goods in r/3.the
policy is that we give customer 1 dr free of charge when they buy 10 dr.
3:when this order has been transferred into r/3,the system automatically add a line
with 1 DR free of charge.
4:in normal,in item 2,it will contain a condition type 'PR01' and 'NA00'.the 'PR01'
is the price and the 'NA00' is the 100% discount.
Nut Now the condition type 'PR01' and 'NA00' in item 2 lost.

ANYONE KNOW THE REASON?

Adobe cloud has lost connection with the server

Adobe cloud has lost connection with the server, can't get adobe cloud to work so I can re-install photoshop to fix a corrupted DLL file.

*Adding new items/removing orphans*
Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
You may need to amend the list of file types these programs look for. My list includes:
.mp3 .mp4 .m4a .m4b .m4p .m4v .mov .wav .aif .mid .ipa .ipg .ite .itlp .m4r .pdf
Note the last 6 types may not be recognised as already being in the library so should either be omitted from the search or you can add (at least for Folder Watch) individual exclusions for files you know are already in your library.
tt2

Mobile Me CONTACTS not coming down to iOS4 and lost visual voicemail

I updated my 3GS to iOS4 and everything seems to be working, howver my contacts haen't repopulated the phone form Mobile Me. they are all still there on Mobile Me, but when I go to contacts on the iPhone, there are none and unlike previously, opening contacts on the phone does not force a sync (no spinning clock-wheel)...
I have tried turning off the Mobile Me setting on the iphone and then restarting it, but still no contacts...
I also lost my visual voicemail.... when I go to voicemail, it wants me to physically dial up voicemail...
Any ideas here?

dmbono wrote:
Try turning off push and instead fetch every 15 minutes. There seems to be a bug that prevents data from getting through on push. Hope they remedy this soon!
Huh? A "bug" would affect all devices using the OS. I have no idea what you are talking about as push worked just fine here after allowing a little time for my phone to be re-provisioned by the network. That took longer than normal due, I'm sure, to the large number of folks trying to do the same thing I was. And we've all hear AT&T whine that we evil iPhone users are breaking their network.

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

Webmail timeouts and lost mail

I have seen several topics here with people complaining that Webmail times out when they are composing outgoing mail, and lose it when they hit send. However, none of these existing posts seem to have valid fixes or responses, and they all seem to be locked down to prevent new comments, so here is my two cents:
1. I have absolutely experienced the same thing. I've finally gotten into the habit of composing e-mail in an external editor, because I am sick and tired of wasting time recomposing lost e-mail.
2. The Verizon FAQ states two, contradictory policies, both of which are inaccurate:
http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/121965.htm:
Does Webmail time me out?
Webmail does not timeout due to inactivity.
http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup%20And%20Use/QuestionsOne/123344.htm
Does Webmail time out?
Due to security reasons, Webmail Basic does timeout after 20 minutes of inactivity. However, messages that were being composed before your session timed out will be saved in the DRAFTS folder.
The first one is outright wrong. Webmail absolutely, positively DOES time out.
The second one is wrong, at least in some circumstances. I have no doubt that this is their desired policy, but like many other customers, I'm here to tell you that under at least some circumstances, Webmai-l times out in as little as 5 minutes, and in these same circumstances, IT DOES NOT SAVE YOUR COMPOSED E-MAIL TO THE DRAFTS FOLDER. It simplay takes you to the log in screen, and when you log back in, your text is irretrievably gone. Verizon Webmail has not auto-saved anything for me in at least a year.
3. I have a theory as to what is going on here, and I am testing it today. Maybe one or two other folks can try this, too. I will report back whatever I find:
I access Webmail through an old bookmark which is defined as http://netmail.verizon.net/webmail/driver?nimlet=deggetfolder
However, I notice that if I login fresh from www.verizon.net and navigate to Webmail, I GET DIFFERENT SESSION COOKIES THAN I DO FROM THE ABOVE BOOKMARK. For example, I get a cookie called -_WL_AUTHCOOKIE_VZCSESSIONID which is not present when I log in using the old bookmark.. There are a couple of other variations, but this seems the most suspicious.
So, my theory is that those of us who often lose composed e-mail after ridiculously short time outs, are logging in from old bookmarks, and that things changed underneath us at some point during a Verizon Webmail update. I am going to try usng Webmail today from a fresh login, after first clearing out all my existing Verizon cookies, and see if this results in longer sessions without timing out, and saved messages when it does time out.

Oh, and don't even get me started on SEARCH for text within a message. This has never worked, from Day One.
All I ever get is "We were unable to perform your request. Please try again." SEARCH on header text, like Sender and Subject works fine, but apparently Verizon QA has never tested the other options on large mail inboxes.
I'm pretty forgiving and undersrtanding of minor glitches and shortcomings in software, but Verizon Webmail is one of the most unreliable utilities that I've ever encountered from a large company with a huge customer base.

Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

Hey Fagen!
You will want to see the following article for guidance on achieving the result you wish to achieve:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Ive lost my apple ID for my ipod, now i have an iphone and i want to use the same apple ID for both can someone tell me how to do this

I have lost my apple ID for my ipod, now ive got a new iphone and i want to use the same ID for both, can anyone one tell me how to do this? ( i no my ID for the iphone)

Just use the same ID.
These may alos help:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Lost proxies

Similar Messages

Maybe you are looking for