Lost recovery disc

I lost my recovery disc for my iMac

You're referring to your SL install disk? You can call Apple, give them your serial number, and for a nominal charge, they'll send you a replacement.

Similar Messages

  • Re: I lost recovery disc 1 for Satellite P10

    Hi there, my son has lost recovery disc 1 for his Satellite P10.
    We have got disc 2 (drivers) but not disc 1.
    Where can we obtain another recovery disc 1. and what will it cost approx .
    Message was edited by: merdat

    Hi
    Usually you could order it from the ASP in your country but Im not quite sure if you will be able to order such disk because the P10 is an older notebook series and possibly the recovery disks are not more available for this model.
    However, you should contact the ASP in your country to get a confirmation.
    Maybe you are a lucky man and the CD is available.
    Good luck

  • I have lost my hp pavilion dv4 recovery disc. how can i get original cd

     I have hp pavilion dv4 laptop with product number WP67OPA#ACJ.lost one of my recovery disc and I donot have copy in my hard disk. How can I get original recovery disc

    Greatdavid,
    What is your product number?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I lost recovery and i don't have disc. please help me.

    I lost recovery and I don't have disc. Please help me solve this problem. My Lup Top name is HP G62-224CA the status is 
    OxcOOOOOOf

    Hi,
    You can order a new set from the following link (scroll down for other countries):
      http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I lost recovery and i don't have disc. Help me,Please!

     1. Product Name and Number
    -HP pavilion g4-1016dx
    • How do I find my product name and number
    2. Operating System installed (if applicable)
    Windows 7 Home Premium 64 bit
    3. Error message (if any) 
    i lost recovery and i don't have disc
    This question was solved.
    View Solution.

    For a small fee you can order Recovery Media right from your Support page HERE
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Hi , I own a hp pavilion dv6 6050se laptop bought in UAE during 2011, I have lost the recovery discs

    Hi , I own a hp pavilion dv6 6050se laptop bought in UAE during 2011, I have lost the recovery discs.
    How do i get a copy of recovery discs??

    Hi,
    I don't see any link on your Product Page to order a replacement set of Recovery Discs, but it's always worth calling HP directly and see if you can order them this way.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    If you are unable to order these discs from HP, here's an alternative option you could try.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Lost my recovery disc win 8.1

    I lost my recovery discs. I want to know my windows 8.1 single language activation key. I want to activate my windows..pls help.. hp customer care is not responding to my call

    Hi,
    The key is in the BIOS of your machine, please use the following tool to get it:
       http://www.belarc.com/free_download.html
    When run this tool, it produces a report, scroll down to Software Management section. Windows 8 or 8.1 product key is in there.
    You can also use the following tool to find out:
      https://www.magicaljellybean.com/keyfinder/ Note: Most likely you won't be able to use the key to activate, you have to call Microsoft OR you have to order a new set of Recovery media from HP. 
    Regards,

  • Lost Recovery Drives and Discs

    I have lost my windows 7 recovery Disc's and image. My laptop is giving startup error and is asking for launch start-up repair but this cannot be done without recovery Image disc's. I need immediate solution to the problem please help me or send me the recovery for the same.

    Hi
    >>i see that this laptop was purchesed form India
    >>then you need to contact Indian support to order Rcsd
    >>please call at 1800 200 0047
    Please click "Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
    I am an HP employee

  • My recovery disc created was lost, how do i get new one??

    my recovery disc created was lost, how do i get new one??  

    Hi:
    I doubt you can get the disks from HP anymore.
    You can call them and ask because getting a recovery disk set from HP will cost you less than $20.00, most likely.
    In the event I am right about HP no longer having them, you can get a recovery disk set from this place below if the license on your PC is for Windows XP Professional.
    http://www.computersurgeons.com/productdetails.aspx?ID=1709
    Paul

  • I have notebook hp hdx16 and i need i recovery disc as i lost mine so please can u send for me

    HP HDX X16T-1200 CTO Premium Notebook PC
    i have this notebook
    and i looking for recovery disc for my computer

    Hi:
    Please read the info at the link below and see if a set can be ordered.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
    If not, you can install W7 following the guidance below if you can read the 25 character W7 product key on the Microsoft COA sticker on your PC.
    If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
    Burn the ISO using the Burn as ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
    Use the 25 character product key on the PC to activate the installation.
    The key will activate either a 32 or 64 bit installation.
    Then go to the PC's support and driver page to install the drivers you need.
    Link to the W7 ISO file downloads is below.
    http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
    Paul

  • Windows XP restore discs & lost recovery partition

    If I have two M series Thinkcentres having compatible machine types. Can I use a set of restore discs from the first Thinkcentre to factory install Windows XP onto a second Thinkcentre where the recovery partition and install drive became corrupted?
    Also do Thinkcentre applications and utilities install under a retail copy of Windows XP (installed onto a Thinkcentre)?
    e.g. Fingerprint reader software, Rescue and Recovery, Client Security, etc.
    Solved!
    Go to Solution.

    Yes, if the model is the same (same first 4 digits) you can use the recovery discs on the second machine. You will load the disks, and then when that process is finished, you will select F11 at boot and then restore to factory state once the Windows Recovery loads.
    No Thinkcentre specific applications will load with a retail copy of Windows. You will have to go to the Lenovo download pages and install the apps individually.

  • Recovery discs do not work with new hard drive

    Hi I have come here desperately seeking help as I am not too knowledgeable with the workings of computers and I have spent an incredible amount of time just trying to get my laptop to some level of functionality.  I purchased a HP Envy and it had a corrupt hard drive which would not work from day one, laptop was new.  After a year of constant pressure on HP they finally decided to replace it and let me choose any laptop so I went with the Beats Envy 14 as it was the best one offered from the selection.  Low and behold the thing would not work properly from day one, again my brother who is much more of an expert said that there was definitely a hard drive issue so for the past 3 years I have put up with a computer that constantly crashes with BSOD, where I have lost data on numerous occasions (only so often I can back up), that I have had to constantly reset the thing using HP recovery discs, and that generally cannot cope when performing multiple tasks.   HP are most certainly shocking builds from my experience.  Then just last week the hard drive just craps itself and the laptop no longer will boot up.  I took it to a guy to get it at leYst working again so he has installed a new hard drive but with an old version of Windows 7.  I want to go back to the Windows version I was akin to on the HP recovery disk , and essentially have it all set up as before except for now having a workable hard drive however I get the message:  "This computer is not supported by the System Recovery Discs.You will not be able to continue to recover this system with these discs.Error: 0100 - 3385 - 3078" I also tried out of interest to load my old Windows 7 disc I had and XP but had no success.  Tried booting from startup etc and various things suggested on help forums.  Please tell me I am not stuck with this version of windows.  Whilst the discs included Windows 7 it was a totally different version, this home premium one is terrible. Any help/advice would be gratefully received. Thanks

    no they were both 500gb. I read about that already, I heard about creating a partition for recovery etc but this is all a bit above me , as I said I am not very technical when it comes to the working of a computer.  These discs worked perfectly before but now with the new hard drive will not load at all.  I essentially hate the Windows Home Premium verions the guy who fixed it put on, whilst the discs had Windows 7 on them the icons were way smaller, the desktop neater, the buttons different, everything was a lot more modern and I was used to it.  This version looks like something from the 90s, have to constantly adjust size of Mozilla when browsing as it is huge.  I have my own version of Windows 7 on another disc but the hard drive will not let it load either........considering waiting for Windows 10 but again unsure if this new hard drive will even let that update Thanks

  • 2 probs! HDD Formatted and no recovery discs and "1962 NO Operating System" error message

    Hi, I have had my Lenovo Idecentre B540 for approx 2 weeks now and my hard drive had to be formatted and windows reinstalled.  However, this means the partition is lost and i had no recovery disc or drivers disc with it so have been unable to get the touchscreen working and probably missing out on all the features that were the reasons for buying this machine.
    Running Windows 7 home premium and have downlaoded all the drivers from the support page on here but nothing there for the touch panel drivers and cant find it or ideatouch 4.5 online either.
    I would like a disc sending to me or a link to be able to downlaod please.
    Also now i have had
    "1962 no operating system" error message when booting. ANy known reason for this? Lots of guesses online but no concrete answer.

    You might look at this thread and you might also do a search:  http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/LENOVO-IDEACENTRE-B540-ONE-KEY-RECOVERY...

  • Windows 7 Home premium recovery disc

    Hi guys. This is my first post. So i own a HP pavilion dv6 3010-us which runs Windows 7 Home premium 64 bit. I had a problem with my laptop and the only way I knew how to fix it was to perform a clean install of the OS. So I gave a guy my laptop to reinstalll my OS and he installed a different OS! My laptop now runs on Windows 7 Enterprise. I want my laptop back to its default factory OS. My laptop didnt come with a recovery disc, it only came with a recovery partition on the hard drive. But whenever i attempt to boot up my laptop in recovery mode, it tells me "BOOTMGR is missing" I don't even know how to fix this error. And my laptop isnt even booting up windows now cause I set the recovery partition, that is not working, as the active partition. Please how do I get my laptop back to its default OS? I dont have a recovery disc and I cant order it/them from HP. Is there a way that i can create a recovery disc that will help me fix my laptop? (If im able to restore my laptop to factory OS, I hope i'll still have all the HP features and software) 

    You won't be able to recover to the original operating system.
    Once the guy installed W7 over the original one, you lost the use of the recovery partition. It is basically useless space now.
    The only other thing you can do is to use the product key (if you can still read all 25 characters of the W7 product key) on the bottom of your notebook to install the operating system that came with your notebook. 
    Most dv7 consumer PC's come with W7 Home Premium 64 bit, so here is the direct link to the Microsoft digital river W7 x64 Home Premium SP1 ISO file.
    http://msft.digitalrivercontent.net/win/X17-24209.​​iso Windows 7 Home Premium x64 English
    Make sure you get the whole file to download.  Sometimes it reports download complete but you didn't get the whole 3.xx GB file.
    Then either use your DVD burning program's burn ISO file option to burn the file to a DVD so that it is bootable.
    Burn at the slowest speed you can.
    Or, use this tool to transfer the file to a 4 GB USB flash drive or DVD.  This tool will also make the media bootable.
    http://www.microsoft.com/en-us/download/windows-us​​b-dvd-download-tool
    Then go to your PC's support page to get the available driver and software you need.
    If your notebook is running OK with W7 Enterprise installed, then doing the above will not change anything other than to provide you with the operating system that came with your notebook without any of the additional software.

  • Hp pavilion dv6 3049tx recovery disc info needed...

    i lost my 1st recovery dvd...can anyone please upload the 1st revovery dvd  in any website?
    i need the 1st revovery dvd only for my dv6 3049tx.
    i have rest 5dvds...only my 1st dvd is lost. please help someone.
    NB - I bought the laptop last year September,2010 and my recovery discs were total " 6 "
    Do all hp dv6 3049tx users have same number of "6" recovery discs created by the recovery manager?

    Hi,
    You may have to ask for the whole set, borrowing just ONE may not work because the environment could be difference after you logon to the machine for the first time.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Re: How to have more than one vertical axis in graphs...

    As a matter of fact, there is a library of dual-Y-axis controls, developed by National Instruments, but for some reason it did not make it into the official release. I've been using it under v.5.01 quite successfully. The only problem with it is that

  • Java command still not working - please help

    i have installed jdk1.6.0_05. The javac command works fine but the java command does not work at all. even when i try java HelloWorld i receive this exception message Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld Caused by: ja

  • ADF UIX: page in a subdirectory.

    I have created page in the project which is in subdirectory. Then has added in page the Read-Only Table from Data Controls. At start of page, write "No records found" ! If the same page to start from the root directory then records are displayed. 1.

  • 160gb classic not loading

    My Ipod classic 160Gb I bought just a few weeks ago has stopped working already. It wont load, when I reset it it tells me battery empty, when I load it, either on laptop, 12V or power it just makes this reset sound every minute or so but nothing els

  • Keep getting capture scratch folder in my capture scratch folder

    In my system settings I have set capture scratch like this...MEDIA1:capture scratch. Of course MEDIA1 is one of my drives. But why am I getting a capture scratch folder in my capture scratch folder? Shane, I even carefully followed your instructions