Lost serialnumber

I have a new computer and will install Lightroom 5. I have Lightroom 5 in my old computer, it was upgraded from Lightroom 4 (I have that serial number) via email, but I have lost the email with the new serial number. What can I do to install Lightroom 5 in my new computer?

Assuming you registered the software, it will be on your Adobe account.
Go to Adobe.com, towards the top right choose "Sign in to My Adobe" if necessary, then "Sign in" changes to "Welcome". Click that, and from the drop-down choose "My products and services". If you're registered Lightroom, it will be in the list. Click on it and it will show the serial number.
If you haven't registered it, you'll have to go to Adobe support and try to get them to find it. Have you got any proof of purchase?

Similar Messages

Is there any possibility to find my lost serialnumber for new installing the adobe creative suite?

Is there any possibility to find my lost serialnumber for new installing the adobe creative suite?

The new serial number for :
Product Name ADOBE DESIGN STANDARD
Product Description SNL,DSGN,5.5,WIN,ED,D
Platform Windows
Version 5.5
Language German
I have send it to you by personal message. You had recently contacted Adobe & requested for it.
Regards
Rajshree

Lost serialnumber after cleaning up, one i found on my Adobe account, the other one I can't find

Some time ago, I ordered photoshop element 9 and premiere elements 9 together with my Dell. After a recent computer clean up, I can't reinstall my photoshop elements9 disk. I found the serialnumber from premiere on my Adobe account but the serial from photoshop, i can't find it anywhere. The disks from both programs say: "For budles only" so I thought maybe it was a bundle with the same serialnumber but that wasn't the case. What can I do next?

check here: http://helpx.adobe.com/x-productkb/global/find-serial-number.html
if that doesn't help, contact dell.

Lost my serialnumber to Photoshop Elements 10. And my email isn't no longer in my mailbox

Lost my serialnumber to Photoshop Elements 10.
Downloaded it to my laptop at the time I bought it, and now I would like to have it on the stationery computer at home.
Think I deleted the email from Adobe and if I look in my Adobe-ID there isn't any product registred

if you purchased and downloaded from adobe or registered with adobe, support may be able to help you recover your serial number.
contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

My IPhone is lost, the original one was damaged and i became another one from apple, but i dont got any informations about Serialnumber or else, please help

Hello Community,
My IPhone is lost since yesterday, the problem is, i don't got any serialnumber or else to get an apple support. I had a problem once and apple traded my damaged iPhone for a new one, i got everything from the old one, but nothing from the "new". On the german apple website i can find the sentence :
"Du kannst auch eine Liste der Seriennummern, die deiner Apple ID zugeordnet sind, finden und Informationen über die Verwendung von „Mein iPhone suchen“ für iPhone, iPad, iPod touch oder Mac bekommen."
On english this means :
"You can get a list of serialnumber, wich are addet with your apple id, and get information about the using of Find My Iphone for iPhone, iPad......"
But they don't tell me where i can find it.
Thanks for helping me already.
And sorry for my bad english.

Here are the ways to locate your SN:
http://support.apple.com/kb/HT4061

I've lost the Invoice of my Satellite L300

Hello!
I've lost the invoice of my Satellite L300, which I bought on 5. 5. 2008.
What can I do now???
Can I become back the warranty???
Monika

hey
if i log in at http://www.toshiba-tro.de/unitdetails with my serialnumber I see that the warranty goes to 2010-04-10.
is this date the real warranty date and do i not need the invoice with this date???

My IBM blade server Lost all the Interfaces its running oracle linux 6.3

Hi am moses i installed oracle linux on ibm blade server and installed the ethernet, iscsi and fcoe drivers and it worked fine. but after there was an electrical blackout my oracle Linux server lost all
the eth* interfaces. Please assist on what to do because it contains installed application and we don't need to format it.

The out put for dmesg is this:
io scheduler cfq registered
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
pcieport 0000:00:02.2: irq 67 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 68 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
pcieport 0000:00:11.0: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 70 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:16:00.0: Signaling PME through PCIe PME interrupt
pci 0000:16:00.1: Signaling PME through PCIe PME interrupt
pci 0000:16:00.2: Signaling PME through PCIe PME interrupt
pci 0000:16:00.3: Signaling PME through PCIe PME interrupt
pci 0000:16:00.4: Signaling PME through PCIe PME interrupt
pci 0000:16:00.5: Signaling PME through PCIe PME interrupt
pci 0000:16:00.6: Signaling PME through PCIe PME interrupt
pci 0000:16:00.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
efifb: probing for efifb
efifb: framebuffer at 0x90000000, mapped to 0xffffc90027900000, using 6144k, total 16384k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7ed3b038/3/0]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0x92301000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.39-200.24.1.el6uek.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0x92300000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.39-200.24.1.el6uek.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
Refined TSC clocksource calibration: 1999.993 MHz.
Switching to clocksource tsc
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 2 ports detected
usb 2-1.1: new high speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=ffff, idProduct=0248
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Gadget USB HUB
usb 2-1.1: Manufacturer: no manufacturer
usb 2-1.1: SerialNumber: 0123456789
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 6 ports detected
usb 2-1.3: new full speed USB device number 4 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=04b3, idProduct=4002
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: IBM MM2
usb 2-1.3: Manufacturer: IBM
usb 2-1.3: SerialNumber: 0000003012214
usb 1-1.2.2: new high speed USB device number 4 using ehci_hcd
usb 1-1.2.2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2.2:1.0: USB hub found
hub 1-1.2.2:1.0: 4 ports detected
usb 2-1.1.5: new high speed USB device number 5 using ehci_hcd
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
usb 1-1.2.2.3: new high speed USB device number 5 using ehci_hcd
usb 1-1.2.2.3: New USB device found, idVendor=0928, idProduct=0007
usb 1-1.2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.3: Product: Mass Storage Plus
usb 1-1.2.2.3: Manufacturer: OEM
usb 1-1.2.2.3: SerialNumber: R8RQ6GKC900D1Z
usb 2-1.1.5: USB disconnect, device number 5
usb 2-1.1.5: new high speed USB device number 6 using ehci_hcd
input: IBM IBM MM2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input1
generic-usb 0003:04B3:4002.0001: input,hidraw0: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:00:1d.0-1.3/input0
input: IBM IBM MM2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input2
generic-usb 0003:04B3:4002.0002: input,hidraw1: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:00:1d.0-1.3/input1
input: OEM Mass Storage Plus as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2.3/1-1.2.2.3:1.1/input/input3
generic-usb 0003:0928:0007.0003: input,hidraw2: USB HID v1.11 Device [OEM Mass Storage Plus] on usb-0000:00:1a.0-1.2.2.3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2013-09-03 14:54:17 UTC (1378220057)
Initializing network drop monitor service
Freeing unused kernel memory: 1508k freed
dracut: dracut-004-283.0.1.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
udev: starting version 147
udevd (141): /proc/141/oom_adj is deprecated, please use /proc/141/oom_score_adj instead.
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
mpt2sas version 13.100.00.00 loaded
scsi0 : Fusion MPT SAS Host
mpt2sas 0000:0c:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mpt2sas 0000:0c:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (41134540 kB)
mpt2sas 0000:0c:00.0: irq 71 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 71
mpt2sas0: iomem(0x0000000092240000), mapped(0xffffc900100d8000), size(16384)
mpt2sas0: ioport(0x0000000000002000), size(256)
mpt2sas0: Allocated physical memory: size(4219 kB)
mpt2sas0: Current Controller Queue Depth(1865), Max Controller Queue Depth(2040)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2004: FWVersion(10.00.08.00), ChipRevision(0x03), BiosVersion(07.18.04.02)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
Emulex LightPulse Fibre Channel SCSI driver 8.3.5.68.6p
Copyright(c) 2004-2011 Emulex. All rights reserved.
lpfc 0000:16:00.2: enabling device (0040 -> 0042)
lpfc 0000:16:00.2: PCI INT C -> GSI 36 (level, low) -> IRQ 36
lpfc 0000:16:00.2: setting latency timer to 64
lpfc 0000:16:00.2: 0:1408 Port Failed POST - portsmphr=0x80000400, perr=x1, sfi=x0, nip=x0, ipc=x0, scr1=x0, scr2=x0, hscratch=x0, pstatus=x400
lpfc 0000:16:00.2: 0:1412 Failed to set up driver resource.
lpfc 0000:16:00.2: PCI INT C disabled
lpfc 0000:16:00.3: enabling device (0040 -> 0042)
lpfc 0000:16:00.3: PCI INT D -> GSI 38 (level, low) -> IRQ 38
lpfc 0000:16:00.3: setting latency timer to 64
lpfc 0000:16:00.3: 0:1408 Port Failed POST - portsmphr=0x80000400, perr=x1, sfi=x0, nip=x0, ipc=x0, scr1=x0, scr2=x0, hscratch=x0, pstatus=x400
lpfc 0000:16:00.3: 0:1412 Failed to set up driver resource.
lpfc 0000:16:00.3: PCI INT D disabled
Initializing USB Mass Storage driver...
scsi1 : usb-storage 1-1.2.2.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi: waiting for bus probes to complete ...
scsi 1:0:0:0: CD-ROM            IBM SATA DEVICE 81Y3658 IB01 PQ: 0 ANSI: 0
mpt2sas0: host_add: handle(0x0001), sas_addr(0x500507604d0112dc), phys(4)
mpt2sas0: port enable: SUCCESS
scsi 0:1:0:0: Direct-Access     LSI      Logical Volume   3000 PQ: 0 ANSI: 6
scsi 0:1:0:0: RAID1: handle(0x00b5), wwid(0x098d6d2781629507), pd_count(2), type(SSP)
scsi 0:1:0:0: qdepth(128), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:0:0: Direct-Access     IBM-ESXS MK1401GRRB       SC27 PQ: 0 ANSI: 6
scsi 0:0:0:0: SSP: handle(0x0005), sas_addr(0x5000039428005452), phy(0), device_name(0x5000039428005451)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x500507604d0112dc), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:1:0: Direct-Access     IBM-ESXS MK1401GRRB       SC27 PQ: 0 ANSI: 6
scsi 0:0:1:0: SSP: handle(0x0006), sas_addr(0x500003942802c216), phy(1), device_name(0x500003942802c215)
scsi 0:0:1:0: SSP: enclosure_logical_id(0x500507604d0112dc), slot(1)
scsi 0:0:1:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 0:1:0:0: [sda] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sd 0:1:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda3 for LVM logical volumes vg_sspaswl11g3/lv_root vg_sspaswl11g3/lv_swap
dracut: inactive '/dev/vg_sspaswl11g3/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_home' [15.00 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_swap' [19.68 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_oracle' [50.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/vg_sspaswl11g3-lv_root
dracut: Loading SELinux policy
type=1404 audit(1378220065.747:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 9 users, 12 roles, 3762 types, 187 bools, 1 sens, 1024 cats
SELinux: 81 classes, 250819 rules
SELinux: Permission audit_access in class file not defined in policy.
SELinux: Permission audit_access in class dir not defined in policy.
SELinux: Permission execmod in class dir not defined in policy.
SELinux: Permission audit_access in class lnk_file not defined in policy.
SELinux: Permission open in class lnk_file not defined in policy.
SELinux: Permission execmod in class lnk_file not defined in policy.
SELinux: Permission audit_access in class chr_file not defined in policy.
SELinux: Permission audit_access in class blk_file not defined in policy.
SELinux: Permission execmod in class blk_file not defined in policy.
SELinux: Permission audit_access in class sock_file not defined in policy.
SELinux: Permission execmod in class sock_file not defined in policy.
SELinux: Permission audit_access in class fifo_file not defined in policy.
SELinux: Permission execmod in class fifo_file not defined in policy.
SELinux: Permission syslog in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-0, type ext4), uses xattr
type=1403 audit(1378220066.125:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
be2net 0000:16:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.0: setting latency timer to 64
be2net 0000:16:00.0: POST error; stage=0x400
be2net 0000:16:00.0: PCI INT A disabled
be2net 0000:16:00.0: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.0 failed with error -1
be2net 0000:16:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.1: setting latency timer to 64
be2net 0000:16:00.1: POST error; stage=0x400
be2net 0000:16:00.1: PCI INT B disabled
be2net 0000:16:00.1: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.1 failed with error -1
be2net 0000:16:00.4: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.4: setting latency timer to 64
be2net 0000:16:00.4: POST error; stage=0x400
be2net 0000:16:00.4: PCI INT A disabled
be2net 0000:16:00.4: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.4 failed with error -1
be2net 0000:16:00.5: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.5: setting latency timer to 64
be2net 0000:16:00.5: POST error; stage=0x400
be2net 0000:16:00.5: PCI INT B disabled
be2net 0000:16:00.5: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.5 failed with error -1
be2net 0000:16:00.6: PCI INT C -> GSI 36 (level, low) -> IRQ 36
be2net 0000:16:00.6: setting latency timer to 64
be2net 0000:16:00.6: POST error; stage=0x400
be2net 0000:16:00.6: PCI INT C disabled
be2net 0000:16:00.6: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.6 failed with error -1
be2net 0000:16:00.7: PCI INT D -> GSI 38 (level, low) -> IRQ 38
be2net 0000:16:00.7: setting latency timer to 64
be2net 0000:16:00.7: POST error; stage=0x400
be2net 0000:16:00.7: PCI INT D disabled
be2net 0000:16:00.7: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.7 failed with error -1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
cdc_ether 2-1.1.5:1.0: usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.1.5, CDC Ethernet Device, 36:40:b5:d1:00:67
usbcore: registered new interface driver cdc_ether
sd 0:1:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:0: Attached scsi generic sg1 type 0
scsi 0:0:1:0: Attached scsi generic sg2 type 0
sr 1:0:0:0: Attached scsi generic sg3 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input4
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70b
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-3, type ext4), uses xattr
Adding 20635644k swap on /dev/mapper/vg_sspaswl11g3-lv_swap. Priority:-1 extents:1 across:20635644k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
NET: Registered protocol family 10
iscsi: registered transport (iser)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
usb0: no IPv6 routers present
802.1Q VLAN Support v1.8
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.10 (Jan 22, 2011)
TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.39-200.24.1.el6uek.x86_64
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.39-200.24.1.el6uek.x86_64
TCM: Registered subsystem plugin: rd_dr struct module:           (null)
TCM: Registered subsystem plugin: rd_mcp struct module:           (null)
CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc7-ml
CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
CORE_HBA[0] - Attached HBA to Generic Target Core
RAMDISK: Referencing Page Count: 8
CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables
rd_dr: Using SPC_PASSTHROUGH, no reservation emulation
rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation
Vendor: LIO-ORG   Model: RAMDISK-DR        Revision: 4.0
Type:   Direct-Access                      ANSI SCSI revision: 05
CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes
TCM: Registered subsystem plugin: pscsi struct module: ffffffffa056ece0
TCM: Registered subsystem plugin: fileio struct module: ffffffffa0575700
TCM: Registered subsystem plugin: iblock struct module: ffffffffa057a740
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
fuse init (API version 7.16)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
usb 1-1.2.2.1: new high speed USB device number 6 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Mass Storage
usb 1-1.2.2.1: Manufacturer: Generic
usb 1-1.2.2.1: SerialNumber: 68204C70
scsi2 : usb-storage 1-1.2.2.1:1.0
scsi 2:0:0:0: Direct-Access     Generic Flash Disk       8.07 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg4 type 0
sd 2:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
udev: starting version 147
udev: starting version 147
udev: starting version 147
udev: starting version 147
usb0: no IPv6 routers present
usb 1-1.2.2.1: USB disconnect, device number 6
usb 1-1.2.2.1: new high speed USB device number 7 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Mass Storage
usb 1-1.2.2.1: Manufacturer: Generic
usb 1-1.2.2.1: SerialNumber: 68204C70
scsi3 : usb-storage 1-1.2.2.1:1.0
scsi 3:0:0:0: Direct-Access     Generic Flash Disk       8.07 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 3:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 1-1.2.2.1: USB disconnect, device number 7
usb 1-1.2.2.1: new high speed USB device number 8 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=1e3d, idProduct=2093
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Flash Disk
usb 1-1.2.2.1: Manufacturer: USB 2.0
usb 1-1.2.2.1: SerialNumber: 0719440042B25701
scsi4 : usb-storage 1-1.2.2.1:1.0
scsi 4:0:0:0: Direct-Access     USB 2.0 Flash Disk       5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
[root@sspaswl11g3 Desktop]#

How to find imei or serial on a lost iPad, if you don't have backup?

My son lost his ipad on a trip. I have no backup in itunes. Where can i get imei or serialnumber? The device is connected to Icloud and i have send locked message to the device. In order to search for the device thru lost and found services i need the serial or Imei. Anyone that have an Idea ??

Finding serial number for a device - https://discussions.apple.com/message/18246553 - from box or backup file, not from Apple.
http://support.apple.com/kb/HT2526 - If you registered a device you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
My Support Profile - https://supportprofile.apple.com/MySupportProfile.do
Maybe a way to find serial number after a device is no longer in your possession - https://discussions.apple.com/message/19524469 - "The easiest way to find your serial number is this Open Itunes...click help... run diagnostics.....(tick or untick as necessary) so that you just have ticked the last two, device connectivity and device sync. run these tests. it will say no ipod/ipad found but will give results of test....scroll down to bottom of results... here you will find the serial number of your last attached devices."
iPhone: Locating the serial number, IMEI, ICCID, or MEID - http://support.apple.com/kb/HT1267 - from phone itself, a computer to which it has been backed up, or packaging.

Lost xs key

I bought Logic pro 7 when it was released. Later on when LP8 was released, i bought the upgrade and installed it WITH the xs key.
" days ago I formated my computer and as i was about to install LP8, Iinsert LP8 serial, and was asked to eather 1: insert the xs key or 2: enter the original serialnumber(from Logic7, I guess)
I have lost my xs key, and the only "serial" I got for Logic pro7, si a MPN-code and a support ID, -NO SERIAL NUMBER.
I contacted apple, and I can ether buy a new xs key or buy Logic express(to have a serial-number for upgrade).
As I´m traveling a lot, and I use Logic in my everyday work, I can not wait 2 weeks for getting a new xs key...
I already got all manuals and install-cd´s for LP7 and LP8, all I need is MY serial number or xs key.
I prefer the serial, as a new xs-key might be lost again and more trouble will come my way..
Any good ideas will be highly appreciated!
Thanx

I already got all manuals and install-cd´s for LP7 and LP8, all I need is MY serial number or xs key.
There have been many questions like this over the past few months. Here is how I understand it:
Logic Pro 7 ONLY uses an XSKey. There is NO serial number for Logic 7 because the dongle acts as your serial number. You will have to get another XSKey from Apple.
There were many people griping about this when Logic 8 first came out. Some people suggested that Apple should have a system where you turn in your XSKey and receive in return a serial number that would work, but nothing came of that. I'm afraid you're going to have to wait.
I contacted apple, and I can ether buy a new xs key or buy Logic express(to have a serial-number for upgrade).
I think someone at Apple gave you bad advice. I do not think you could go out and buy Logic Express, because you purchased the 'Upgrade from Logic Pro 7' package, which is DIFFERENT than the 'Upgrade from Logic Express' package. The only thing that is going to work is a valid XSKey from any of the packages supported by the upgrade, which are Logic Pro 6/7 or Logic Platinum/Gold 5/6. If you bought any of these packages used that came with an XSKEy that would work.
Good Luck!

The codition type of free goods lost.

We are facing a problem about the codition type of free goods.
Our business flow is:
1:customer order 100 DR material A from CRM.he entered the requited number in item 1.
2:we transferred the order into r/3 system.and we define the free goods in r/3.the
policy is that we give customer 1 dr free of charge when they buy 10 dr.
3:when this order has been transferred into r/3,the system automatically add a line
with 1 DR free of charge.
4:in normal,in item 2,it will contain a condition type 'PR01' and 'NA00'.the 'PR01'
is the price and the 'NA00' is the 100% discount.
Nut Now the condition type 'PR01' and 'NA00' in item 2 lost.

ANYONE KNOW THE REASON?

Adobe cloud has lost connection with the server

Adobe cloud has lost connection with the server, can't get adobe cloud to work so I can re-install photoshop to fix a corrupted DLL file.

*Adding new items/removing orphans*
Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
You may need to amend the list of file types these programs look for. My list includes:
.mp3 .mp4 .m4a .m4b .m4p .m4v .mov .wav .aif .mid .ipa .ipg .ite .itlp .m4r .pdf
Note the last 6 types may not be recognised as already being in the library so should either be omitted from the search or you can add (at least for Folder Watch) individual exclusions for files you know are already in your library.
tt2

Mobile Me CONTACTS not coming down to iOS4 and lost visual voicemail

I updated my 3GS to iOS4 and everything seems to be working, howver my contacts haen't repopulated the phone form Mobile Me. they are all still there on Mobile Me, but when I go to contacts on the iPhone, there are none and unlike previously, opening contacts on the phone does not force a sync (no spinning clock-wheel)...
I have tried turning off the Mobile Me setting on the iphone and then restarting it, but still no contacts...
I also lost my visual voicemail.... when I go to voicemail, it wants me to physically dial up voicemail...
Any ideas here?

dmbono wrote:
Try turning off push and instead fetch every 15 minutes. There seems to be a bug that prevents data from getting through on push. Hope they remedy this soon!
Huh? A "bug" would affect all devices using the OS. I have no idea what you are talking about as push worked just fine here after allowing a little time for my phone to be re-provisioned by the network. That took longer than normal due, I'm sure, to the large number of folks trying to do the same thing I was. And we've all hear AT&T whine that we evil iPhone users are breaking their network.

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

Webmail timeouts and lost mail

I have seen several topics here with people complaining that Webmail times out when they are composing outgoing mail, and lose it when they hit send. However, none of these existing posts seem to have valid fixes or responses, and they all seem to be locked down to prevent new comments, so here is my two cents:
1. I have absolutely experienced the same thing. I've finally gotten into the habit of composing e-mail in an external editor, because I am sick and tired of wasting time recomposing lost e-mail.
2. The Verizon FAQ states two, contradictory policies, both of which are inaccurate:
http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/121965.htm:
Does Webmail time me out?
Webmail does not timeout due to inactivity.
http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup%20And%20Use/QuestionsOne/123344.htm
Does Webmail time out?
Due to security reasons, Webmail Basic does timeout after 20 minutes of inactivity. However, messages that were being composed before your session timed out will be saved in the DRAFTS folder.
The first one is outright wrong. Webmail absolutely, positively DOES time out.
The second one is wrong, at least in some circumstances. I have no doubt that this is their desired policy, but like many other customers, I'm here to tell you that under at least some circumstances, Webmai-l times out in as little as 5 minutes, and in these same circumstances, IT DOES NOT SAVE YOUR COMPOSED E-MAIL TO THE DRAFTS FOLDER. It simplay takes you to the log in screen, and when you log back in, your text is irretrievably gone. Verizon Webmail has not auto-saved anything for me in at least a year.
3. I have a theory as to what is going on here, and I am testing it today. Maybe one or two other folks can try this, too. I will report back whatever I find:
I access Webmail through an old bookmark which is defined as http://netmail.verizon.net/webmail/driver?nimlet=deggetfolder
However, I notice that if I login fresh from www.verizon.net and navigate to Webmail, I GET DIFFERENT SESSION COOKIES THAN I DO FROM THE ABOVE BOOKMARK. For example, I get a cookie called -_WL_AUTHCOOKIE_VZCSESSIONID which is not present when I log in using the old bookmark.. There are a couple of other variations, but this seems the most suspicious.
So, my theory is that those of us who often lose composed e-mail after ridiculously short time outs, are logging in from old bookmarks, and that things changed underneath us at some point during a Verizon Webmail update. I am going to try usng Webmail today from a fresh login, after first clearing out all my existing Verizon cookies, and see if this results in longer sessions without timing out, and saved messages when it does time out.

Oh, and don't even get me started on SEARCH for text within a message. This has never worked, from Day One.
All I ever get is "We were unable to perform your request. Please try again." SEARCH on header text, like Sender and Subject works fine, but apparently Verizon QA has never tested the other options on large mail inboxes.
I'm pretty forgiving and undersrtanding of minor glitches and shortcomings in software, but Verizon Webmail is one of the most unreliable utilities that I've ever encountered from a large company with a huge customer base.

Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

Hey Fagen!
You will want to see the following article for guidance on achieving the result you wish to achieve:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Lost serialnumber

Similar Messages

Maybe you are looking for