Lost set up cd for WRT54G wireless router

I was wondering if there is somewhere I can download another set up disk. We installed the router on a laptop at our office and now we need it on a desktop to be able to do our billing through a clearing house. Is there any help in a situation like this?
PTA

u dont need any CD to install the router on your pc---try opnening up IE and type 192.168.1.1
username: blank---pwd: admin---then config WRT54G according to the reqd settings

Similar Messages

Configure WRT54G Wireless Router with PUBLIC IP address and use DHCP for internal computers

Hi,I have an Internet online service with 5 public IP addresses. The router and the AP are connected to a switch. I would like to configure a WRT54G wireless router with one of this IP public Address and use DHCP (with private ip address) for the computers that will connect to the AP. As the AP is connected to the switch it is possible that other wired computers that are connected to the same switch can obtain an IP address from the DHCP ?
Thansk in advance

Thanks for your help. Please correct me if Im wrong. After connecte the equipments the way you suggestI setup a static IP address (The public IP) in the WRT54GI enable DHCP in the WRT54G with a range from 10.10.0.100 to 10.10.0.200 (as an example) The gateway is the Public IP address right ? How do I route the 10.10.0.x addresses to the public IP address. Thansk again

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

Hi, I just bought a linksys WRT54G Wireless Router. My...

Hi,
I just bought a linksys WRT54G Wireless Router. My laptop was able to detect it wirelessly untill I changing the "Router Name" in the setup page(http://192.168.1.1)
While saving the settings, the wireless network suddently disconnected. From that point onwards, I was not able to detect the wireless network with any computer at all.
I tried unplugging it, resetting it, and even restory factory settings by holding the reset button for aprox 30 secs.
What is wrong?
Thanks in Advanced

Recheck the wireless setting (SSID, encryption, DHCP, etc) on router management page again. Also make sure your computer's wireless adapter setting matches the one you set on router.
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

Trying to setup my Linksys WRT54G Wireless Router but having trouble.

Right, i will keep this nice and simple. I have had broadband internet for the past 10 days and yesterday i got myself a Linksys WRT54G Wireless router so both myself and my partner can connect our Macbook Pros up to the wireless internet.
But the problem is we cannot seem to connect onto the wireless network. It shows up when searching for internet connecting even when its is open without a password or with a password it does not want to connect?!?!
I can plug my laptop directly (as i am doing now) into the broadband modem and it works so i have no idea what is wrong? This afternoon we tried using a Windows Laptop and had the same problem. The wireless network shows up but when you enter the password that was entered on the 192.168.1.1 website it does not reconise it?!?!
If you can reply speaking English and not too much computer language that would be fantastic.
Many thanks

Hi candn14 and welcome to the forums!
Since internet connection is working fine on the laptop computer when plugged directly into the modem, you just need to configure your router settings.
Are you using a DSL or Cable connection? Please see the links below on how to configure your router with your internet provider (ISP).
Setting-Up a Router with Cable Internet Service
Setting-Up a Router with DSL Internet Service
Once you are finished doing so and your laptop is able to connect to the internet when connected to the modem > router > laptop, then you are now ready to configure the wireless settings of the router for you to be able to connect wirelessly.
Here are the steps:
Setting-Up the Wireless Settings on a Router
And please secure your network w/ a password.
Setting-Up Wireless Security on a Linksys Router
Please feel free to ask any questions again if you encounter any problems. Hope this helps.

Playstation 3 Wireless Network Enable Crashes WRT54G Wireless Router

I am trying to set up my wireless connection on my Playstation 3 via my WRT54G wireless router. Whenever I start at the beginning and select Enable for Wireless Connection, the wired end of my router which is attached to my cable modem crashes. My host wired PC loses it internet connection. As I proceed with my Playstation 3 Wireless Network setup, the PS3 can still wirelessly see my router. I do an automatic configuration, but the router is unable to assign a TCP/IP address to the PS3. My main problem is that the PS#crashes my router the moment I even enable the wireless connection. Any ideas?

I don’t think of anything else that a Firmware on this router. Download the latest firmware for this from http://www.linksys.com/download and Upgrade that to your router. Reset and reconfigure it, reduce the MTU to 1365, assign a static IP on PS3 and forward the ports needed by PS3 for this IP address. Now you should able to connect to this router wirelessly.

I have WRT54G Wireless Router on my main computer (VISTA...

I have WRT54G Wireless Router on my main computer (VISTA) and I am trying to set up A Linksys Compact Wireless-G USB Adapter (WUSB54G) on my other computer (XP). It is all setup, however I am getting the message "You are connected to the access point, but the Internet cannot be found." To further complicate the issue, when I check the IPCONFIG on the XP computer, I get back some weird IP address that is outside my router's network, even though I'm using DHCP.
I know the router is working - my laptop associates through the wireless network with no problem, and I can access the network printer that is also wired to the router. The problem seems to be in the configuration of the old XP computer with the new WUSB54G adapter.

Try following settings ....
Uninstall the drivers for the Adapter from start >> All programs ....
>> Insert the Setup CD in the cd drive>> Click on Exit when the
Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
that pops up on your screen>> Click on “Install software
automatically “, and then click on next. Once the installation is
complete>> Right click on the wireless network connection icon in the
system tray besides the clock >>Click on view wireless networks and
then connect to your network name.

Switched from DSL to CABLE. WRT54G Wireless Router stopped working.

When I switched from DSL to CABLE, my WRT54G Wireless Router stopped working. I am not able to access the router page (192.168.1.1) Also, when I use the set up CD for re-installation, the wizard aborts in the middle saying it can not connect.
I appreciate any help to resolve this problem.
P.S. The router acts like a one-port wired router.

Here is my favorite method for resetting a router to factory defaults, and trying to get it working again.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

New WRT54G wireless router. Who's the genius that can help me?

I just purchased a WRT54G wireless router. The main reason is my son wanted to be able to use his Sony PSP online. I also have two desktop computers that will be wired thru this router. My question's are. If he is using his PSP online and the desktops are wired, can the desktops be "hacked" if they are on/off? If the router is turned off then the wireless is not working? If I access the router and disable the SSID Broadcast then the wireless portion of the network is off? What are the safest security settings to protect my network?
Thanks.

Dead Mans Zone.... I guess.
Using the DMZ is a very simple and risky way to forward ports. The DMZ takes an ip address of a computer on your network, and forwards all ports to that computer. This is really nice if you are having problems forwarding ports for some program. It can be a life saver if your router will not allow you to properly forward ports. It also has a huge downfall. The computer that is in the DMZ is now wide open to internet traffic. Meaning that it will catch virii, and it will be at risk of being hacked. If you put a computer into the DMZ then please install a software firewall to help protect it
Orange/White. The Cisco logo is the Router’s SecureEasySetup button. It lights up and will stay orange when the Router is powered on. The color orange indicates that the Router is not using the SecureEasySetup feature, while the color white indicates that the Router is using the SecureEasySetup feature. When the Router enters SecureEasySetup mode, the Cisco logo will turn white and start flashing. After the Router has generated the SSID and WPA-PSK (also called WPA-Personal) key, the Cisco logo will stop flashing and stay white.
Message Edited by wehowardjr on 12-30-200611:26 AM

HP Officejet Pro 8500 wireless Networking with LINKSYS WRT54GS wireless router

I have a HP Officejet Pro 8500 wireless printer conneted via WiFi to my LYNKSYS WRT54GS wireless router. I do not have a USB cable or ethernet cable plugged to the printer. I am able to use the 'scan to email button' and the 'scan to network folder' button on the front of the printer and I can pint from the PC to the printer with no problems.
I installed the HP printer software from the CD, choosing network/wireless connection, without having to install any USB cables from the PC to the printer in the process. many posts in the forum mention having to connect USB cables in the wireless installation process.
Can I install the software in the same fashion on the other two laptops? Or, do I need to do something differently?

The USB cable is used on those printers which do not have display or front panel wireless setup is not possible. We configure the wireless settings during install and save those settings in printer's memory by transferring through USB cable. Therefore the USB is plugged in during wireless installation temporarily. In your case I don't think plugging in USB cable is necessary as the printer is already on network and had IP address. Connect the laptops on wireless network and proceed with regular install, the printer should be detected automatically.
Thanks
Naveen K
HP Support Engineering Center
Click on BLACK STAR button to say thanks
(Although employed by HP, I'm trying to address the issues with my sole willingness and my employer does not bear any liability for my responses)

I recently bought a WRT54G wireless router along with a W...

I recently bought a WRT54G wireless router along with a WUSB54GC compact wireless adapter and set up both products as directed.I get a message saying connected to the access point but cannot find internet. While connecting to my internet directly,(using a fiber optic cable with no modem necessary)it connects to the internet however using the modem,wired or wireless it still gets the same error. I am not computer literate,so i don't understand abbreviations or where to go to input information into certain areas,so if anyone could help me with step by step information I would be very grateful. Thank you and happy holidays.

Let me know the Model number of the adapter & the operating system of the computer ......so that i can assit you further ... ..

I installed the WRT54G Wireless router on my desktop and...

I installed the WRT54G Wireless router on my desktop and have been using the internet on that pc and my laptop (wirelessly) for a few months. Last week I uninstalled Norton Internet Security and installed ESET Smart Security. Now my desktop cannot get to the internet and the advisor says it does not detect a router. But my laptop says it's connected to my network and I am able to use the intenet on it. The router itself has all of the correct connecions and the appropiate lights are lit. Could the ESET Smart Security Software have messed up my router firmware. Please advise.

there seems to be consistant issues with Linksys routers according to all the posts ive been reading for the past month while i try to fix my on and off again internet connection. its becomming very annoying. i have asked my cable company to replace my modem, which they did and that didn't even help. last year i bought a new linksys router thinking it would solve my problem back then. it did for a while, then my lap top wouldn't connect any, so i sent it into have it checked and it came back with no problems. soooooooooo apparently, while i am connected to my neighbors open connection from his BELKIN ROUTER and even though the signal is very weak............amazingly enough!! i am still online while typing this.......funny eh?? WELL........it seems to me......that i guess i wont be buying linksys anything anymore. Especially after spending hours on the help line (INDIA) trying to reset channels and reset the router box itself. i give up.......i have 2 pieces of crap routers for sale cheap......any takers? dont waste your time

Trouble accessing the internet on a WRT54G wireless router

I’ve run into a problem setting up a wireless network at my friends’ house. The problem is accessing the internet from the wireless PC that has a WMP11 Wireless PCI Card to a WRT54G wireless router.
The wireless PC is running Windows XP and it sees and connects to the router with “excellent” signal strength but will not connect to the internet.
The router is currently set to WEP 128 bit encryption security. I’ve tried disabling the wireless security all together but when I do that the wireless PC no longer sees the router.
I have no trouble connection to the internet thru the wireless network I have set up at my house when I bring his computer there. But my router is an older Linksys 802.11b so maybe that’s why.
Anyone have any ideas what I should try other than telling him to buy a new wireless G adapter card?

If earlier your Wireless Adapter is working fine with the same network & computer .... try upgrading the drivers of the aqdapter .... from http://linksys.com/download .... uninstall the older drivers & reinstall newer drivers ....

Problem with wired computers on a WRT54G wireless router

I have a WRT54G wireless router that has been working flawlessly up until now. On Sunday, my son informed me that his computer, which is wired wasn't connecting to the internet. Upon further investigating, we found out that our wired computer in our gameroom wasn't connected either. However, our main pc, which is also wired, was connecting just fine. I checked my laptop and several other wireless devices and they were online as well.
Here's the weird thing. In my gameroom, I have just one cable coming into the room from the router. That cable connects to a 5 port switch which then connects to my gameroom pc, Xbox 360, and Playstation 2. I checked my Xbox 360 and it connected to Xbox Live as soon as I turned it on so that told me that I had connectivity coming from the router and the switch. But why was the pc not connecting?
Anyway, I restarted the router, but that didn't fix the issue. I then restarted my cable modem, a Motorola Surfboard, and the router and the issue was resolved. All my pcs were connecting again.
Everything was fine until yesterday when the exact same issue occurred. This time the modem and router restarts did not fix the problem. Again, I have connectivity coming from the router to the 5 port switch because my wired Xbox 360 connects just fine, but my wired pc does not. My son's wired computer is not connecting, but my main pc is. I cannot figure out how to resolve this issue.

Might be possible that the router need reconfiguration ... So reset the router...for few seconds ... after reset ... Please access the setup page of the router by launching an Internet Explorer and type on the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as “admin "" all in lower cases and then click on ok. On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button. Now click on the sub tab ""MAC address clone"". - Click on enable - Click on clone your PC's MAC button and then click on the Save Settings button. Power cycle the network again & see if it works ...

WRT54G Wireless Router Problem. Need Help!

I'll start with the basics of my situation and if more details are needed, I will provide to the best of my ability.
I have a comcast cable internet connection. I have 6 computers in my house. Two of them are downstairs (which is where our modem is.) The other four computers are upstairs. All of these computers are Desktop computers with the exception of one laptop.
My laptop (which is Windows XP) can pick up a random wireless signal from the room it is in. I also found out a way to share the internet connection on the computer by going into the properties of my network connection and enabling internet sharing on it. This means if I connect a network cable from my laptop to another computer, I can leech the connection from my laptop and have internet access on the other computer. I also had a switch that I used to connect the other 3 computers upstairs by means of the laptop. The problem was, the laptop was using someone else's wireless connection in the area, and it wasn't strong enough to keep up a constant connection.
I decided, if I can leech someone else's wireless connection, why not have my own. So i recently bought WRT54G Wireless Router and set it up on one of the computers downstairs (because that's where the modem is). It works fine as far as connecting my laptop to the internet from upstairs. My laptop can access the internet through the connection I set up in the LELA program.
Here is the part I am confused about. Everything is plugged in correctly as far as the router is concerned because the laptop can access the internet. But when I connect an ethernet cable directly to one of my other computers (which are Windows Vista, but I didn' t have a problem with it previously when I was leeching someone else's connection), the connection drops on my laptop, and the other computer still can't access the internet. A notice pops up that says its trying to identify the network, but it gives an error that says there is something wrong with the DNS. As soon as I disconnect the ethernet cable connecting my laptop to one of the other computers, the connection is fine again on the laptop. It's only when I connect the computers together that the connection drops.
I just don't understand why it wouldn't work when I created my own network if it worked with another network with no problem. My whole point in getting a wireless router was to have a router within good range to keep up a constant connection on my other computers that aren't in range of the modem downstairs. I just don't know where else to look. I'm not sure if it can be fixed on LELA, manually through my wireless settings, or if it could be a problem with one of my computers' settings. I've tried many different things and I'm not sure what else to do so any help is most definately appreciated. I feel like I've tried everything. I know it's possible because I've one it before, I just need the help because I'm not much of a networking person and I don't know what I should start with to make this work.
Thank you to anyone who can help or even point me in the right direction.

Access router setup page ...Click on the Wireless tab on the Setup page- Here Wireless Network mode should be mixed- Provide any non-linksys name .... Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>Now Click on the Sub tab under wireless > "Wireless Security" Change the Wireless security mode to WEP/WPA ...type in the key & click save settings .... >>>>Click on Advanced Wireless settings>>Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" Check the connection once again & see if it works or not ...

Lost set up cd for WRT54G wireless router

Similar Messages

Maybe you are looking for