Lost software in Vista

The recent upgrade to iTunes failed and i, following another thread of discussion, removed all apple software to reinstall.
This worked well, nbut when i came to load iCloud i have found that it will not load with vista and apparently i need to upgrade to windows 7 on an old laptop.....
I cannot now transfer music or films from my pc to my ipad or iphone.
i was not planning on changing my computer either!
Does anybody have an idea on how i can resolve this?
Thanks
R

check software referenced in this thread. (but note my question there as to whether anyone has successfully installed it)
https://discussions.apple.com/message/24647825#24647825

Similar Messages

  • Sonic Software for Vista on T61 machine - Help!!

    I got a T61 laptop for work and it came with XP Pro. I upgraded it to Vista Business and need the Sonic software for Vista. I downloaded the software from the website, ran the package 1v29ez00lmc-b.exe, and it extracts the files. But when I try to run Setup.exe, it gives me an Entitlement Check error window saying 'This program is not for machine type 6470CTO.' Where can I get the software for Vista that will work. I know when I go to the extracted files, there is a package.zip file that is password protected. If I could at least get the password for that, then I think I can get it installed.

    Hi Julia
    I do, everything is installed, infact i am now uninstalling the CS6 versions in hope that this will work?
    thanks

  • Airport Express Base Station Software for Vista???

    Okay, I bought the Airport Express Base Station because it supports Vista to play my itunes on my home stereo. I am completely lost here. The device came with a version of software (v4.2) that doesn't support Vista and when you try to update the software, it complains because my Airport Utility is to old. Why has Apple made it so hard to us this device on a Vista machine when they advertise that it works with Vista?
    Any help would be greatly appreciated.

    Interestingly, Apple doesn't provide the new AirPort Utility as a download since it's provided on the installation CD that comes with the new 802.11n AirPort Extreme Base Station. Have you tried contacting Apple for a replacement CD?
    As an option, here's a workaround...
    o Download a copy of the Less_MSIerables utility to the Windows Vista desktop, and then, extract it to a folder of your choice.
    o Download AirPort Base Station Update 2007-002 for Windows to the Windows Vista desktop.
    o Use a program like winrar or winzip to uncompress that file to a new folder
    o Next go to the folder in which you extracted Less_MSIerables.
    o In a subfolder you will see a file called lessmsi.
    o Right-click on this file, and then, click "Properties."
    o Click on the "Compatibility" tab.
    o Enable the option "Run this program in compatibility mode for: Windows XP (Service Pack 2)."
    o Click "Apply," and then on "OK."
    o Right-click on the lessmsi file again.
    o Choose "Run as administrator," and then, after the program starts click on the "..." button to browse to the folder where you unzipped AirPort521Update.
    o Select "APSetup," and then, click "Open."
    o Select "APUtil.exe," and then, click "Extract" to extract the file to the Vista desktop.
    o A file folder will appear with a name like cab#APSetup.cab1.
    o Open that file folder and you will see a file named: APUtil.exe.
    o Either run APUtil.exe from it's present location, or copy it to its final destination.

  • Lost audio after Vista upgrade on a Satellite Pro A120 PSAC1E

    Hello,
    I've just upgrade to vista and i've lost my audio. I've tried all the latest drives, still no luck. The pc says the driver is installed and the device is working correctly but i cant hear nothing. Volume is 100% also.
    Any ideas?

    I have a similar problem.
    You can solve the problem in one of two ways, and I list them in the order I would recommend you try them:
    1. Disable Driver Enhancements for your device.
    Through control panel, double click on sound. You should receive a prompt asking you if you want to disable Driver Enhancements. Click yes. Restart. Done.
    If this doesnt work, try
    2. Install vista drivers direct from Realtek.
    Realtek has new drivers available for High Def Audio. They can be found at:
    http://www.realtek.com.tw/downloads/
    Click on High Definition Audio Codecs
    Select under windows, Vista Driver (32/64 bits) Driver only (ZIP file) and select one of the mirrors and download the file (Warning: Takes a long time!)
    Under control panel, through device manager, uninstall your realtek audio device.
    Restart.
    When Vista detects the new device, just click cancel.
    Open the Zip file, find Setup.exe and install. Done.
    Yep. Done!
    Good luck and let me know how you get on.
    Cheers
    Celticjif
    [Edited by: admin]

  • I can't synchronize my iPod's with my iTunes software (Windows Vista Home Premium) due to problems with the access authorization / rights for this operation

    Hi there,
    I'd like to ask you something:
    I'm trying to synchronize all my iPod's (I have as many as 4 iPods: 2 iPod touch a 8 GB each and 2 iPod classic a 160 GB each) with my iTunes software (Version 11.3.1 which is installed on a Windows PC (Windows Vista Home Premium)). Unfortunately, the iTunes software refuses to run the command "synchronize with the iPod connected" regarding each and every iPod I have. iTunes just declares:
    Synchronizing is impossible because I wouldn't hold the access authorization / rights for this operation.
    I uploaded the songs at issue to my iTunes folder from CD's (all songs are in AAC format now).
    What is this access authorization, why was something like that invented and what can I do to get it?
    How do I have to proceed in detail?
    What would it cost?
    I am brand new here and have never ever made a post in any support community anywhere in the world in my life. Well, and I am not excessively knowledgeable about the particular computer or mac language but I know the very basics or can find out about them.
    Anyways - can you help me please?
    If you can't help me, who can do so?
    It would be nice if you could answer me as soon as possible!
    Thank you guys
    Prying Pedro

    Yes, others have experienced the problem, a simple search of the forums would have revealed that and the simple solution.
    Termporarily disable any security software on the computer.

  • Driver software for vista having problems

    something is wrong with the driver software on my computer im trying to use my new ipod nano 5th generation on my computer that uses windows vista everytime i plug it in though it says that my computer doesnt have the proper driver software to work properly, so i go through the set up and no matter which options i choose( for it to update manually or automaticly or anything) it will not work i installed the latest version of itunes and everything, i searched the apple site and couldnt find anything relating to this topic, so if anyone knows what to do please post or somthin

    Try the iPod forum. There is one just for nano, itunes, etc
    http://discussions.apple.com/index.jspa?categoryID=1
    http://discussions.apple.com/category.jspa?categoryID=150
    also there are daily Apple tech notes
    http://support.apple.com/kb/index?page=articles

  • How to enable Creative Software in Vista with SBLive 5.1 Digi

    ******NOTE: This workaround involves using a 3rd party driver, and is not officially supported by Creative Labs ******
    Please add any comments on the original post, found here: http://forums.creative.com/creativel...essage.id=7420
    ***this solution seems a little hit and miss, i have had everything working for two days but just installed the latest ATI 7.2 catalyst driver and what do you know, the only thing that works now is wave studio, all other programs put the windows "this program has stopped working" message. I do not know whether or not this is directly related to the ATI driver or a windows update, but i have tried uninstalling and reinstalling everything. It has worked and i assume still does for some people....so this is not a guaranteed solution, it seems to be down to each machine as to whether this workaround works. I still have working sound, and its just as good, just no EAX anymore, and the functionality of most the programs seems to have disappeared. Still probably worth a try and you have nothing to lose*** I believe i have found a solution for users of SoundBlaster Live 5. Digital users on Vista. This workaround may support other soundblaster live cards, i have only been able to test it on mine so far so if anyone wants to test other cards, please let me know so we can add them to this list. This workaround should allow you to install your creative software from your installation disk, with a high level of functionality in VISTA, as well as getting your SBLive card working very nicely. So far, i have managed to use:
    Playcentre, with all options including EAX Recorder, althought it will only let you record from the microphone EAX control panel, including modifying, importing and exporting of all Enviroments, FX and EQs Wavestudio - fully operational Audio HQ - Speakers and surround mixer dont work - EAX control panel will deal with most of this, and going to the sound option in Vista control panel will let you enable bass/treble and speaker config. Windows DriversMindisc Studio - This seems to work, although i no longer have a minidisc so cant confirm to what extent Remote Centre - as above. To actually achieve this is relatively simple, but i think a few people havent done all the steps, just the first few, and are left a bit confused as to how to set it up. If you follow these steps you should have nothing to set up, by the last step you should have a system which thinks it has a SBlive installed, and all the standard creative software in the start menu, to use almost as normal. It is relatively uncomplicated to do and takes about 5-20 minutes.
    STEP ONE If your card is currently installed IE: it appears as recognised in the device manager, begin by uninstalling it. You should ideally begin this whole process with your card uninstalled. STEP TWO Download the following driver:http://download.kxproject.lugosoft.com/downloads/kxdrv3538m-full.exe
    ** This is a third party driver and is not endorsed or supported by creative.
    What this driver will do is allow your pc to recognise your SBlive. Download the driver somewhere convienient EG: desktop. Do not install yet
    STEP THREE Reboot your system, and when the popup comes up asking where drivers are , ignore and close them - do not direct the systems to the drivers as you are going to install them yourself. Once you have shut all the popup windows and driver requests, Click on the KXDRV3538m-full.exe you should have on your desktop. This will unpack the drivers and should automatically run the installation program. Follow the onscreen prompts to fully install the driver and the KX software. Once you have followed this installation, you should be asked to reboot, do so and when you reload you should have sound when you logon to windows.
    This is only half of the solution, you must continue the with next steps
    STEP FOUR - CREATIVE SOFTWARE Ok so now you want to put all the creative software you were used to on XP onto your system. This as is straightforward as you could want it to be - simply put your creative disk in and install the card drivers and software as per usual, you should have no errors and the install should complete in 5-0 minutes - As per usual you will be asked to restart which is fine.
    STEP FIVE - Completed When windows loads up now you should still have sound, except now your system recognises your card - and by going into the start menu you should find that nearly all creative programs that you installed - with the exception of surround mixer will work, in some cases with full functionality. Please refer to the top of the thread to see what programs offer what. ***Other required workaroundsTo enable the microphone in Recorder, you must right click on the .exe in the root folder(C:/Program files/Creative/Programs/...), select Properties > compatability and set it to XP SP2
    ***Notes Bass, treble and speaker settings can be found in the Sound option on the control panel, OPEN sound, click on speakers (SBLIVE) and there will be an option TONE. Bizarrely these sliders dont slide - clicking on them activates them and sets them to the middle, but you can not change them. However it sets it to the right amount, so any bass/treble problems can be resolved using the EQ in your audio player, or in the EAX control panel. To my knowledge, once you have completed stage five, you can actually uninstall the KX drivers that you installed in Step Two. This driver is only needed to allow you to install the official Creative Drivers and everything should still function after the uninstall of the KX driver. You must follow all steps to get your creative software working. i currently have the following programs working in VISTA:
    www.thebast.com/Citech2007/itworks.jpg
    ***I must also add that i am not responsible for these drivers, and will not take the credit for them as that would be highly unfair on the guy (whose name i dont know) who went to all the effort to create them. I simply tried his drivers, and then tried installing the creative software once i had which is how i got to writing this guide. As you can see from the screengrab above, this worked.
    Please add any comments on the original post, found here: http://forums.creative.com/creativelabs/board/message board.id=Vista&message.id=7420
    ******NOTE: This workaround involves using a 3rd party driver, and is not officially supported by Creative Labs ******

    Hi Don,
    I did answer a similar question but of course cannot find the thread anymore.
    Your expression to increment the counter is OK. In CP5 the increment action is not listed anymore in the dropdown lists of the advanced action.
    In your analysis you do forget this: the user can rollover twice on the same area, not? And do you want all text captions to remain visible once they have been made visible?
    Perhaps another approach: create a user variable for each Rollover slidelet, initially set to 0. In the action executed on Rollover check first if its variable = 1, in that case only the Text Caption has to be made invisible again (in case you hide it when other rollover areas are activated), if it is 0, you change the variable to 1, add it to your counter, show the Text Caption and hide the other Text Captions, and then only check the value of the counter, if it is 4 you show the button (or enable it, but I do not like to show a disabled button to a user).
    As for using a counter to do something, I have used something like that in my Menu Template (second use case). Here is the link to that blog post:
    Template for reusing scripts
    Lilybiri

  • Boot camp Software in vista x64

    I am running vista x64 on a 1.1 Mac Pro. The OS runs just fine but I would like to have all of the boot camp software running. Is there anyway to do this?

    If you have 10.5.6 DVD, you can install some non Apple Boot Camp drivers. You actually need the set that came with the 2008 Mac Pros.
    OSSwitcher and TimeServices are the only real items I can think of you would not have.
    Or wait for Windows 7 - you can download it today - and hope.

  • New Laptop w Vista - Need help transfering Palm and other software to Vista

    I got a new laptop that runs Vista. My Palm TX has been the Palm and all other software fine on my Windows XP desktop computer.
    How do I move all my Palm info over to the laptop without starting a lot of problems.
    Will I still be able to sync my Palm on both my desktop Windows XP and my Vista laptop?????
    Can someone please give me a step by step guide for this procedure:
    Thanks for the help and advoe
    JoAnne
    Post relates to: Tungsten T3

    To sync on your new 32-bit desktop you will need to download the Vista-compatible Palm Desktop 6.2.
    You will also need to install Documents To Go v.10 on the new desktop as well...should be fine with Vista.  From what I've seen of Beyond Contacts, you will need to upgrade to 3.0083 to gain Vista support.  I don't know if that's a paid upgrade or not.
    If any of your other third-party apps also have a desktop component or install a conduit for synchronization, you'll need to check with each of them to verify compatibility with Vista and Palm Desktop 6.2.
    When you connect to the new computer for the first time after you install Palm Desktop software, just select the TX's current Hotsync ID to sync with, and the data on the TX should automatically migrate into your new installation.  But it's always best to be safe rather than sorry.  Get a copy of NVBackup (google and download from any legit source such as www.palmgear.com ), and run a complete backup onto a SD card.  That way, you'll be minutes away from a full Restore if anything does happen in the transition.
    Lastly, if you plan to sync with your two computers, you will need to be careful and only use one of them for full 2-way synchronization, and use the other purely as a clone to hold a copy of the data on the handheld, using Handheld Overwrites Desktop conduit settings on that second computer.  Otherwise data corruption is sure to result.  This Palm Knowledgebase Article discusses how to Hotsync one device on two different desktops:
    http://tinyurl.com/kq4c5
    Good luck, let us know how it turns out.
    Post relates to: None
    Message Edited by smkranz on 01-21-2009 11:14 AM
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Lost software recovery usb

    I have lost my software recovery usb that came with my macbook air.
    Is it possible to get a replacement and if so how?

    Since you are using Mavericks, it should not matter.
    You have a recovery disk partition built in to your hard drive.  You can recover by holding Command + "R" while booting.

  • Lost Software CD! What do I do.

    Where can I download the software to run my express. I lost the cd and was hoping there was a place I could download it.

    http://docs.info.apple.com/article.html?artnum=75422
    No need to. It should already be on your PowerBook if your software is up to date.
    AirPort Expess Setup Guide pdf

  • Lost software utility? pls help

    trying to follow HP confusing and garbled/wrong tech sup. I think I may have deleted some utility functions from my OS.
    Do you know how I can check and replace or fix. Have no ink levels, other tools don't work, cannot clean from Mac., only can test pattern with printer button sequence. Prints no blue,green, only thin blue line on hp sunflower logo. HP tech said my cartridge is empty, Office Max said not yet, is software lost. No one knows for sure. This is rediculous and frustrating. Got drivers several times, why are the files so big, gimp messed me up, they hp told me to delete all printer drivers. How where to get what if I need to make work? deskjet895Cse. It worked before when I first got it, only 9 color pages 9x11 on new cartridge. Had trouble keeping the right driver or setup. Please, nothing should be this difficult. Have lost all confidence in HP.
    thank you, primative

    Dear Primative:
    People in these forums report varying degrees of success working with HP printers. I had HP walk me through a wireless printer installation and I personally found their instructions helpful and accurate.
    HP's tech support page claims that, for printing under Tiger, you don't need to install drivers because they're built-in. Some people don't agree with this statement, but I suggest you follow HP's suggestion before you try other more drastic solutions:
    1. Open the "Printer Setup Utility" in Applications-->Utilities
    2. From the menu, choose "Reset Printing System." This should delete HP printing queues you have, if any.
    3. Click "Add" to add your (connected) printer. I'm assuming it is a USB connection.
    If this is successful and your printer is added and appears in the list, selecting it and clicking the "Utility" icon will give you access to the HP Inkjet Toolbox. You'll be able to check ink level, clean and calibrate your printer.
    Good luck.
    G4 933 mhz Quicksilver   Mac OS X (10.4.7)   Wacom Intuos 2 tablet; Epson 2400 Photo; HP Deskjet 6840; LaCie 80gb D2 FWDV

  • Problems with downloading software for vista

    hello
    I have tryed 3 times to download software for Ipod nano 4g with no luck
    I get that the download is ok and I can see Itunes on my computer but see no devices on it I dont know what i am doing wrong is there a way to contact someone to walk me throught it on the phone. Please I need some help this is a gift for my daughter and I would like to have it work . thanks
    Joe

    Does the device show up properly under Vistas device manager or is there an beside it?

  • Audigy 2 ZS Mixer/etc and X-Fi software in vista ultimate 32b

    Hello there.
    I currently have the Audigy 2 ZS sound card and i just upgrade to Windows Vista Ultimate 32bit.
    I would like to find out if there is any planned software updates regarding the Audigy 2 zs. I installed the drivers but the creative mixer doesn't show up for me in Vista. I'am guessing this is due to the older drivers and software that was made for windows xp?
    I also have a question about X-Fi Fatality series. Does the software included with it work properly in Windows Vista or are there problems just like with Audigy 2 zs?
    Reason im asking is because i might upgrading to that soon as well

    StormPetrel wrote:
    A little bit off topic here, but 64bit does not mean more performance at all lol.
    Sure, but there are in some cases drastic performence diferences. Under a fresh installed Vista X64 i have less CPU usage, as under 32 bit. But of course X64 uses more RAM (some tasks are double 32 and 64 bit).But the main reason I have more performence is, that the games I often play, get almost a boost. Dont ask me why, but under 64 bit EAW and FOC have the same FPS as under 32 bit. But under X64 I use a bit more Details and a higher resolution. (both are 32 bit games, so its a bit funy )?______________________?Sure there are other ways to install the drivers. But if some Setup dosent work, the first thing I try is to get it via Divice Management. And as this worked for me, I dont waste time to try other methods (Had bad experience, you can break the driver faster than install it *G*)?______________________?Some Questions I have left (after a few hours undr X64 with Creative Drivers):?Could it be, that the driver causes sometimes havy CPU usage?Could it also be, that the driver causes some lags, after you copy a file (the end sound, copy is finihed, but takes more time for "final finish", than without the drivers) - I know that Vista has some problems, on some PCs with copy, and that MS has an inoficial Patch (but dosent help for my PC so far)

  • .VFO350....how do I install software with Vista

    Hi all,
    Have the Creative VFO350 and after getting the laptop/notebook cleaned back to factory settings my webcam now won't work. Tells me I need to install software (have no software CD) but I see that there might be compatibility issues with Vista. Any help would be greatly appreciated.

    Hello Spuds,
    Welcome to Creative Forums!
    You can download the driver from the support page. Here's the link.

Maybe you are looking for