Lost software to HP PSC 2355 all-in-one

Hello,
I am trying to find out how to get another CD for my HP PSC 2355 all-in-one printer. I can print with it but I can not use the scan feature because I lost my software CD. I got a new computer and I can not find the CD to download it so that I can use the scan feature. If anyone knows how I can get another CD or maybe where I can download the software please let me know. Thanks for the help.

Hello hispanicchyna,
I would like to provide you with some information on this. I'm guessing that your new computer either has Windows 8, or Windows 8.1 running as an operating system.
I recommend downloading and running the HP Printer Install Wizard for Windows. This program was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
The following link may answer your question as well: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&cc=us&dlc=en&lc=en&os=4132&product=422...
Let me know if you have any further questions!
Thank you,
I worked on behalf of HP.

Similar Messages

HP PSC 2355 all-in-one Carriage Jam - No paper jam found

HP PSC 2355 all-in-one unresolved carriage jam, with no paper jam found. I searched with flashlight through the back. Windows 7 64bit. Printer just out of 3 years in storage.
Twice I was able to bypass the problem and print a single page, but then the message returned: carriage jam.
Followed all steps suggested - no solution
Self Test Info: Device 35, 4
Vertical Cartridge to Cartridge Setting: 12
Horizontal Cartridge-to-Cartridge Setting: 0
Black Bidirectional Printing Alignment Setting: 9, 10, -9
Color Bidirectional Printing Alignment Setting: -2 -2, -15: 5, 6, -15
Thanks for any help you may offer.

Hi there,
Double check the content in this article. If you have been through all these steps the product may need to be serviced. If not give the steps a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP PSC 2355 all-in-one printer cuts off bottoms of letters

My HP PSC 2355 All-In-One Printer cuts off the bottoms of letters. Photos are fine. 3rd HP black cartrige, got worse today.
On a Mac, 10.9.3.

Hi @timed
I would like to help you with your 2355 printer. A printer reset can initiate an alignment. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Troubleshooting Print Quality Problems with the Diagnostic Page.
If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP PSC 2355 all-in-one Paper Jam Error

Hi. I have an HP PSC 2355 all-in-one printer that has worked well for a long time but when i switched it on today to do some printing, it made some strange noises and when i tried to print it sent an error saying there was a paper jam - but there was not !
It feeds a sheet of paper in about half way through then stops and the error is displayed.
I tried doing a copy, and the exact same thing happens.
Has anyone got an idea what has gone wrong ?
Thanks.

Make sure to follow all steps here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00212225&cc=au&dlc=en&lc=en&product=422000&tmp_...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Connecting HP PSC 2355 All-in-One printer/scanner using USB cord

I have a Time Capsule that I use to back up both my Mac Mini and my MacBook Pro and would like to connect my HP PSC 2355 All-in-One Printer/Scanner to the network using USB cord and plugging it into the back of my TIme Capsule. I tried this once, but was unable to find the Printer. I would like to set it up so I could use both the Printer and the Scanner from either my MacMini or my MacBook Pro. It would be really cool if I could figure out a way to use Back to My Mac to print when I am away from home and using my MacBook Pro at a WiFi Hotspot. Is this possible? How can I do it? Suggestions? Thank you!

+would it be possible to split the USB cord coming from the Printer+
I'm afraid not. The connection must be direct to either the TC or your computer, but not both at the same time.
Apple's Printer Troubleshooting Guide will guide you through the process of setting up the printer. Unfortunately, Apple does not offer a printer compatibility list, so the only way to really know if your device is compatible is to try to see if it can be configured.
Perhaps HP would could help in this regard.

Scanning in win 8.1 for HP psc 2355 all-in-one

I can't get my HP psc 2355v all-in-one to scan. The printer tells me to install HP software for this feature when I try to start scan from the printer. I have installed the drivers multiple times and cannot find a way to execute the scan from my computer.

Welcome to the HP Community @bleubeck ,
I read about how you are having troubles with scanning to your Windows 8.1 system from your PSC 2355 printer, and I wanted to reach out. There are no drivers or software available to install with this specific printer model on Windows 8.1, as the model is older and OS is newer. I would think that your best bet would be to try running the Print and Scan Doctor to see if the diagnostic tool can detect the printer and scan. If this does not work, you can also try scanning from Microsoft Paint as a work around option.
If all else fails, you can contact HP directly and discuss your printer options to upgrade to a new printer compatible with Windows 8.1.
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Good luck, and thanks for visiting the HP Forums!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

OCR Software for HP PSC 1350 All-in-one

My mother owns a HP PSC 1350 All-in-one. She has Windows 7 OS. She has had it for a while and never needed to scan and type, but she does now for work.
Does anyone know if the HP PSC 1350 All-in-one came with OCR Software on the disk, or if it is downloadable?
If not are there any OCR freeware programs that won't contaminate her computer with ad & mal ware?
Thank you.

Hi,
No more support from the Vista ages or at least 7 years ago:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=306888
You can scan to Word under XP means it does have an OCR software.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PSC 2355-All-in-one

My All-In-One PSC 2355 stopped printing multiple copies of a page, so I decided to re-install it. After deleting the software, I found that my old disc didn't work with Windows Vista Home. I have re-installed the compatible drivers from the HP website and all printing seems to be working fine, but it still will print only one copy of a page. Any ideas?

I'm not sure what might have changed to cause this issue, but you may have to set the number of copies in two different locations. First - set the number of copies when you click File and Print (which is probably what you're already doing). Second - When you click File and Print from the app, click Properties and go into the Basics tab of the driver and set the number of copies in there as well.
Sometimes, either the driver or the app will overide one another.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

PSC 2355 All In One - won't scan

When I try to scan I now get this error message - "You need to install or run HP software for this feature". I un-installed the SW and re-installed but am still getting the same message. ANy suggestions?

Hi pressbox,
I understand you are unable to scan and have already began troubleshooting. I would be happy to help you with your PSC 2355.
Please first post back with the answers to these few questions.
Is the printer connected wirelessly or with a USB cable?
Is the printer connected directly to a wall outlet or a surge protector? (It is best to connect directly to the wall)
Do you have any other HP Printers installed on this computer? If so, do you still have the printers?
Is this an HP laptop or a different brand?
What operating system do you have? Mac or Windows?
While I wait to hear back from you, if you have Windows, and if you haven't already tried the HP Print and Scan Doctor, please do so and let me know the outcome. You will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
Source: Try the HP Print and Scan Doctor for Windows
Click here to download and run the utility > HP Print and Scan Doctor
Please let me know the outcome of the tests perform, you will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
I look forward to hearing from you. Knowing the outcome of the Print and Scan Doctor will help to point us in the right troubleshooting direction!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP PSC 2355 all in one --printer has no response, or has error messages

My printer has been slow or non responsive since installing on my new computer with Window's 7. The most current error message is Error: oxc18e000b 54019: Sweep_mgr_udw.e Any idea what this means?

Hi there,
Double check the content in this article. If you have been through all these steps the product may need to be serviced. If not give the steps a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Need to install my HP PSC 2355 all in one without the disc

got new computer and lost disc for my printer. I can print but I can not use the scan feature without the disc. Where can I find a new disc or from where to download one?

Here is the link to the Vista driver.
There is no driver for 7.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

PSC 2355 all in one stopped printing after windows 8.1 upgrade scan is OK.

I have a HP psc2355 printer which was working happliy in Window 8. I downloaded and installed 8.1 from windows store and the printer no longer works!
With the printer status window open (via the windows control panel) the document detail appear briefly after clicking on the print button. Nothing happens at the printer end. Theres nothing wrong with the printer as I can use it on another PC without problems.
I have uninstalled and re-installed the printer using hppiw 2012-10-31 and run the HP Print and Scan Doctor V 4.1.0.29 which gives a device error "your printer is in a busy state" after any attempt is made to print from applications or from printer/properties print test page.
printer self test prints OK.
scanner works OK
Printer is connected via USB cable rirectly to PC USB port
windows update ran this morning
3 hours wasted so far!
This question was solved.
View Solution.

****SOLVED*** Printer Properties Advanced Tab Print Processor Change settings from Print Processor hpzpplhn to winprint check Default data type is at RAW Printing OK now HP got any support jobs going?

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Installing software for my HP psc 1210 all-in-one printer on to my Mac?

I have downloaded new software and drivers for my all-in-one printer. I am running OS X 10.5.2 on a 20" 2.16 GHz Intel Core 2 Duo. The computer recognises that a printer is present and I can print with no problems. The problem that I'm having is with the scanner function. I don't think that the HP software is registering that there is a printer present. When I go into the HP setup assistant no printer comes up in the selection window. When I go into Printer & Fax via system preferences the HP psc 1210 series comes up as the default printer. I've had this problems before but cannot remember how I rectified it. I'm sure it got something to do with erasing the driver's off the computer and starting over again. Can anyone please help me or point me in the right direction. Thanks

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Lost software to HP PSC 2355 all-in-one

Similar Messages

Maybe you are looking for