Lost some permissions after synchronizing with external hard drive

I bought a LaCie external hard drive so I could back up my files in preparation for upgrading from Tiger to Snow Leopard. Everything was working fine for a while. This is my first experience using an external hard drive and performing back ups. The external drive can perform two functions; back ups and synchronization. I went in and made some changes to the settings for back up and synchronization because I was getting error messages after performing back ups. Evidently, I changed some things I probably should not have.
Prior to the changes I made to the back up/synchronization settings, I was using a folder of pictures as my screen saver. One day I noticed that I can no longer do that, my screen saver keeps defaulting to "Flurry". Even though I go in and change it, the changes I make do not take. I also noticed that in my address book, the pictures I had placed there for different contacts are no longer there and I can no longer add them. One more thing I noticed is that each time I open iTunes, the SLA is displayed and even though I agree to it, it show up every time I open iTunes.
I assume that my "permissions" (for lack of knowledge of the correct term) were somehow compromised when I made the changes to my back up/synchronization settings. Can anyone tell me how I get control back for these functions which I used to be able to perform?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

Similar Messages

  • Issues with External Hard Drives

    I hope this is the right forum for this one - please give me a steer if not! I've also posted it in 'Dock and Finder', but this forum seems equally appropriate, if not more so.
    I'm getting repeated issues with External Hard Drives, including ones that I have been using successfully for months/years, suddenly failing to mount and then becoming 'unknown device' through the firewire branch of 'About This Mac'.
    I've just bought a new hard drive on the grounds that the others had somehow failed, and the same problems are emerging. I decided to Repair Permissions on my iMac's internal drive, and am copying the results below, from repair runs conducted yesterday and today:
    YESTERDAY'S REPAIR PERMISSIONS RESULTS
    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Macintosh HD appears to be OK.
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
    Permissions differ on "Library/Preferences", should be drwxrwxr-x , they are drwxrwxrwx .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library".
    ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
    ACL found but not expected on "System/Library/User Template/English.lproj/Music".
    ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
    ACL found but not expected on "System/Library/User Template/English.lproj/Public".
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/LaunchDaemons/com.apple.usbmuxd.plist", should be -rw-r--r-- , they are -rwxr-xr-x .
    Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "sbin/umount" has been modified and will not be repaired.
    Warning: SUID file "bin/rcp" has been modified and will not be repaired.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
    Permissions repair complete
    TODAY'S PERMISSIONS REPAIR RESULTS
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library".
    ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
    ACL found but not expected on "System/Library/User Template/English.lproj/Music".
    ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
    ACL found but not expected on "System/Library/User Template/English.lproj/Public".
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "sbin/umount" has been modified and will not be repaired.
    Warning: SUID file "bin/rcp" has been modified and will not be repaired.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
    Permissions repair complete
    My concerns are:
    * Some of the permissions repaired yesterday appear to have needed to be repaired again today
    * There are several files which carry a warning that they won't be repaired as they have been 'modified', and some of these clearly relate to disk management.
    Does anyone have any ideas what is going on???
    Thanks!!

    Many problems with the 10.5.7 update have been fixed by a Restart.
    If that doesn't help, something may have gone wrong with the update. Download and install the "combo" update, from: http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
    If that doesn't help, try running the Apple Hardware Test, on the disc that came with your computer.
    1. Disconnect all external devices (including the Ethernet cable) except the keyboard and mouse.
    2. Insert the "Additional Software & Apple Hardware Test" disc that came with your computer.
    3. Restart while holding down the "C" key. When the list of available startup volumes appears, click Apple Hardware Test and the right arrow.
    4. When the Apple Hardware Test main screen comes up (after a moment), follow the on screen instructions.
    5. If it detects a problem, an error code will be displayed. Make a note of it.

  • Blue screen on start up with external Hard drive connected

    On start up Imac freezes on light blue screen with external hard drive connected via firewire. Starts okay without hard drive connected. I have repaired the drive with no resolution of the problem.

    tpetrini wrote:
    On start up Imac freezes on light blue screen with external hard drive connected via firewire.
    You might try starting the iMac in "verbose mode" by holding down command-V when booting:
    http://support.apple.com/kb/HT1492
    That could show you some messages that might explain the problem.
    Another approach is to launch the Console utility and look for messages dated around the time of a hang.

  • HT2729 Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???  Can anyone help me out here?  Thanks.

    I have my itunes stored on my external hard drive of my IMac.
    I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
    Can anyone help me out here?  Thanks.

    I have my itunes stored on my external hard drive of my IMac.
    I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
    Can anyone help me out here?  Thanks.

  • I have my iTunes music folder stored on an external hard drive.  I recently purchased a new Mac.  After attaching the external hard drive, all the songs imported without any problem except my Playlists.  Any clue about where they are or how to revive them

    I have my iTunes music folder stored on an external hard drive.  I recently purchases a new Mac.  After attaching the external hard drive, all songs imported without a problem except my playlists.  Any clue about where they are or how to revive them for use on my new Mac?
    Thanks!

    Rysz wrote:
    To retain your playlists, artwork, play counts, etc, you need to move the entire iTunes folder, not just the music files..
    Correct.
    After that just select the new folder location in iTunes> Advanced settings.
    Incorrect.
    Hold Option and launch iTunes.
    Select Choose library and select the iTunes folder.
    This will read the iTunes library.itl file in this folder and the library as it was previously will be opened.

  • Permissions problem with External Hard drive.

    Hi,
    I've been using my external hard drive for almost a year now and out of the blue last night I ran into a interesting problem. For some reason I couldn't transfer any files to a thumb drive and shortly after I realized I didn't have Read and write permissions for any files on my mac, and everything required my password to get to. I went into disk utility and repaired the permissions and the list went on forever. Upon completion of that nothing was resolved.
    SO! I popped in my Snow leopard disk and did a repair of the permissions and system through there hoping that would fix it. I than booted up the main drive and got stabbed in the face with a HUGE error message upon the apple loading screen with a "MISSING DRIVER" "KERNAL ERROR" "CORRUPT FILE" etc.
    I went back and did a restore from my external harddrive hoping that would work, and it did. I can access my time machine backups from my external harddrive but cannot do so through my own control.
    What should I do? Should I reformat my external harddrive? Which would suck because I'm a paranoid freak and if something would happen during the reformatting I will lose literally over a year of work that is crucial.
    error message upon opening my backup
    http://s91.photobucket.com/albums/k302/nomhak/?action=view&current=Screenshot201 0-03-01atMarch1-201061.png
    error message upon trying to backup
    http://s91.photobucket.com/albums/k302/nomhak/?action=view&current=Screenshot201 0-03-01atMarch1-201-1.png
    icon of backup drive
    http://s91.photobucket.com/albums/k302/nomhak/?action=view&current=Screenshot201 0-03-01atMarch1-201062.png
    Can anyone shed some light?

    nomhak wrote:
    I went back and did a restore from my external harddrive hoping that would work, and it did. I can access my time machine backups from my external harddrive but cannot do so through my own control.
    What is that, a "clone?" What do you mean by "cannot do so through my own control."?
    What should I do? Should I reformat my external harddrive? Which would suck because I'm a paranoid freak and if something would happen during the reformatting I will lose literally over a year of work that is crucial.
    Again, what's on that drive? Do you have a clone and TM backups on the same external? If so, are they in the same partition?
    error message upon trying to backup
    http://s91.photobucket.com/albums/k302/nomhak/?action=view&current=Screenshot201 0-03-01atMarch1-201-1.png
    This one says you need to repair or reformat the disk; that means your backups are corrupted.
    Try to do a +*Repair Disk+* (not permissions) on it.
    If there are errors that Disk Utility can't fix, or the +*Repair Disk+* option is grayed out (meaning OSX has already determined that it can't fix it), post back.

  • After trying to back up with external hard drive my macbook pro is not working

    help. after attempting to back up my files onto external hard drive ( seagate goflex 1TB) on my 10.5 my macbook pro has not been peforming.
    1.) unable to print from my wifi printer. "error while printing"
          ( i called canon we did EVERYTHING, unable to even add the printer back to my macbook after we deleted)
    2.) APPLECARE is expired so.. they don't really want to help anymore I called.
    3.) bluetooth speakers: won't work no sound
    4.) "command+C & V keys don't work. I tried to copy an URL to paste to a new tab: NOPE
          ending up DELETING my toolbar. Wend to View, Customized ToolBar, tried moving the google/internet toolbar NOPE won't allow me, ended up cancelling out
    please help. thank you so much.

    Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
    Click Time Machine
    Click Options
    Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
    The drive will be backed up on the next Time Machine pass
    Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

  • Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

    I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file. 
    Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
    it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
    Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
    important files that we are unable to access now.
    I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
    have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
    In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
    down arrows for browsers, etc (it was 160,000+ photos).
    Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
    Other relevant information:
    We used a Toshiba 500 GB (465 GB) external hard drive.
    Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
    Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
    -John

    I think there's a lack of understanding somewhere.
    "If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
    the external drive back in to your new computer. "
    Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
    I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
    already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
    Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
    into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection". 
    I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
    so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
    Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
    It says to click "view report" for more information, but there's no "view report button".
    At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
    at "0 USN bytes processed".

  • Rescue and Recovery backup with external hard drive

    When I first backed up my computer to my WD 1 tb external hard drive using R&R, boot files were placed on the drive.  Recently, some files I had corrupted my external hard drive and I had to fully erase it.  Now, after making the drive recognizable again, I went to go back up my computer using rescue and recovery.  This time, it asked me whether or not I wanted to make the drive bootable, I said yes, but an error popped up saying I needed 1000 more mb, even though I had 931 gb open.  The backup started anyway, but it did not include any boot files.  Is there a way to make the drive bootable the next time I backup?  What is the difference between nonbootable and bootable?  Help? Thanks.

    I do NOT have a external Hard drive.  If you just zeroed the drive, it is blank.    Go into control panel,administrative tools, computer management, disk management.  See if you can get  a PROPERTIES of the external drive and post a Screen shot of that here.    This will show what partition(s) are there, Fat32 vs NTFS.  My experience is after you zero a drive, You have to boot your system, then use a Vendor (WD) standalone format utility or windows Disk manangement format, Make partition, etc.  The screen shot i need is the one that says: DISK 1  (d 298.09 GB NTFS 
    Healthy(active,primary partition).  This is what my 2nd drive, D, says. 1 partion on the drive.
    When i added my second hard drive, it was blank.  Booted up, BIOS recognized drive, Then i Formatted it with windows disk managment.  I then pointed R&R to take backups to that drive.  Create rescue media then made a Master boot record, install standalone R&R boots files, then took the backup.   This makes my 2nd drive bootable, should i ever care to boot my D drive up and have R&R standalone program in control.  Thus i have 2 bootable drives.  C boots into windows, D boots into the rescue and recovery standalone program.  I can also boot my C drive into R&R by hitting PF 11 at startup (bios) time. 
    Which version of r&r you have? Which version of windows? Windows 7 changed the way Master boot records are written.
    You can go into R&R, advanced menu,  create rescue media. Point to your External drive. WARNING. make sure the do not destroy existing  data block is checked.  IF YOU ARE brave, uncheck the destroy existing data.  This will erase everthing on the drive!!! <<Warning. And be sure NOT to  point to any drive you really love. 
    Buts lets  1st get the screen shot requested to make sure the drive is FORMATTED correcly. 

  • Target disk mode with external hard drive?

    Hi all,
    I have a very annoying problem. I've just bought a new Mac Mini, previously I had an iBook G4 600 (about 6 years old). My Mac mini works perfectly, but...
    1) I don't want to copy everything over from the iBook with Migration Assistant, I'd rather pick and choose what to copy. Is buying a firewire cable and using Target Disk mode the only quick way to do this?
    2) I was intending to transfer files using my external HD. But the Mini doesn't recognise my poor old external drive. However, all my iTunes music is on the external HD. It seems by far the fastest way to get the music off (as long as I can't get the mini to recognise the HD)would be to boot the iBook in Target Disk mode then somehow be able to read from the external HD as well. Is this possible? If not, what on earth can I do??
    Thanks in advance,
    Suz
    Message was edited by: Suz

    Okay after testing, I am ready to conceded that you are correct that you can daisy chain an external drive and a TDM Mac together and have them mount both drives.
    However. unless Suz proves me wrong (Which is always a possibility), I do not think that it will fix her initial problem. Since all's TDM does is allow the computer to act as a Firewire device, so it and the external hard drive, are simply 2 FW devices on a serial bus. If the new Mac Can't mount the external drive from the old computer, I doubt it would mount it with the old computer connected to it. (Unless there is just some funky thing going on that having another firewire device on the bus corrects?)
    Let's see if it shows up in System profiler, and if it shows up there how does Disk Utility see it?
    Have you also tried resetting the NVRAM?
    Also just to be on the safe side, do you have another Firewire device that you can connect, to let us know that the port on the new mac is actually working?

  • Multiple (related?) issues with external hard drive connectivity

    Apologies if this has been discussed but I have been unable to find a solution or explanation after searching here and on other forums.
    I recently purchased an external hard drive (1TB Iomega Select Portable, bus powered, 2.5", USB 2.0). After formatting with two HFS+ partitions the device began disconnecting unexpectedly and afterwards was often not recognisable by my mac until I rebooted. I returned the product and had it replaced by another of the same model.
    The replacement external hard drive worked fine at first but hours later began showing the same symptoms. _It now connects briefly then a few seconds later disconnects._ Occasionally it seems to mount and work fine, but the problem always comes back. In the times when it is working, _Time Machine recognises the drive but only backs up at a rate of about 1KB/s!_
    _I don't know if this is a problem with the external hard drive, my USB ports, or settings on my mac._ Any advise you could offer would be greatly appreciated as I've run out of troubleshooting options with my limited knowledge of computers.
    _**Some tests I've done:_
    1) When it's not being recognised in Finder, it's also not recognised in either Disk Utility or System Profiler
    2) At one stage after repeatedly disconnecting, two other external hard drives and two thumb drives that I know work fine normally also failed to mount, but strangely two wireless mouse USB receivers worked fine. Both thumb drives were formatted as FAT32, one of the external hard drives had one HFS+ and one NTFS partition, and the other was entirely NTFS. When they weren't recognised in OS X, the two FAT32 drives and the NTFS partitions of the external hard drives were all recognised in Windows 7 via VMWare Fusion. After restarting the computer all of them now work on both Windows 7 and Mac OS X.
    3) I tried the external hard drive on another computer (a PC) and it was recognised in Vista's 'Disk Management' with both partitions marked as 'healthy', but it just called it 'Disk 1' rather than showing the names I'd given each partition.
    4) When I first started transferring files onto the drive I often got 'error code -36', but found a solution that seemed to fix that by deleting the '._' files from the source folder through Terminal.
    5) I've tried different USB cables, both USB ports on my mac, and also connecting with and without the secondary part of the 'y' cable that was supplied with it.
    Thanks very much,
    Andrew
    Message was edited by: andrewcarter

    I have the same problem with some 2.5 drives. My iMac on 10.5.8 sees the drive fine but my older 2007 Mac Book Pro 10.6.6 would not see it and now my new Mac Book Pro had problems seeing the drive from my old Mac Book Pro in that box. I had to use migration utility over the network that took 18 hours to copy my user over. I bought a new drive box and now the drive seems to work fine. I have ejected it a couple times and all seems well. I hope it continues to function properly.

  • Issues with external hard drive

    hello, i recently purchased a seagate external hard drive 2TB. i am trying to copy videos onto the external hard drive from my macbook( mac osx version 10.6.3 but the files wont copy. i checked the details of the external hard drive, formatted for windows nt file system (NTFS). also, when i click info on the external hard drive and click on sharing and permissions it says "You can only read". What do i need to do to use the external hard drive with my mac. I should note that i want to interchange the external hard drive both with my mac and windows if possible. can anyone point me in the right direction... thanks

    Macs can't write to NTFS, only read. Here's a post with some background information on your problem if you really need to use this with Windows: http://discussions.apple.com/message.jspa?messageID=11547287 As you can see there's a few potential solutions. How big are these files? If under 4GB you could use FAT32. Note that sometimes file copying to and from FAT, especially large files, seems to be an issue I see not infrequently on these fora.
    If you don't need to use it with Windows, or can install software on the PC to allow it to read Mac drives, then format the drive to Mac Extended.
    [Kappy's extensive hard drive formatting post|http://discussions.apple.com/thread.jspa?messageID=8340551] - note that instructions at end are for zeroing data.
    Message was edited by: Limnos

  • Disk utility recovery of files after deleting from external hard drive?

    I had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
    Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
    What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
    It turns out I deleted everyting without noticing.
    The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
    So now I have two files on my hard drive and no idea how to recover the 'delted' files.
    I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
    I am wondering if there is any free methods to recover these files at all, any help is appreciated.

    The files are still on the drive, and will remain unless and until you overwrite them with new data. So don't write anything more to the drive in addition to the two files you added after reformatting it, and do download the free trial version(s) of one or more data recovery utilities:
    Data Rescue 3: http://www.prosofteng.com/products/data_rescue.php
    FileSalvage 7: http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
    Each is offered in a free demo version that will show you exactly what the full version could recover before you have to pay for anything. There are others on the market, but these are the ones I'm familiar with.
    To recover data using any such utility, you must have another drive available on which to save the recovered files. Saving them on the same drive they're being recovered from would just overwrite other files that haven't yet been recovered.

  • Need Help with External Hard drives and too much music

    I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
    My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
    My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
    I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
    I hope all of this information is helpful! Here is my question:
    What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
    PPC G5 Mac OS X (10.4.9)

    I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
    dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
    Use SuperDuper to backup/clone your drive.
    Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
    A 250GB drive formats to 240GB and you have ~3% free it looks like.
    For every data drive plan to have two backup drives.
    Keep your boot drive to 40% used.
    And your data drive to 60%.
    Backups can go a little higher.
    Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
    By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
    Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
    You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
    Why?
    To begin backup of your current drive. To leave your other FW drives "as is" for now.
    Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
    Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
    You can find a lot of Firewire and SATA drive choices over at OWC:
    http://www.macsales.com/firewire/

  • Using Time Machine with External Hard Drive

    Hey everyone,
    I had a few questions about Time Machine that I hope someone could answer for me.
    I bought my first external hard drive in August, the 1 TB WD My Book for Mac and when I set it up, I configured it to Time Machine, and not the WD software.
    I have an extensive music collection, which was my main reason for buying the external hard drive in the first place.
    Anyway, when I plug in the hard drive and let Time Machine do the back up, I've noticed that it's backing up the same files every single time, and is eating up a lot of space on the hard drive.
    Since I am mainly using this drive to store my music, I was wondering if there was an easier way to do things:
    -Is there a way to not back up my documents, photos, applications, etc, every single time I plug in my HD?
    -Is there an easy way to find my music on the drive? For example, some Time Machine back-ups have different files on them... i.e. my back up from August 10th has certain music files that do not exist on my backup from November 10th, as I deleted them from my computer after they were backed up to the external HD. I'd love to be able to see all of my music in one place, rather different versions of my music folder on different days.
    Any help would be greatly appreciated.
    Thanks a lot.

    Hi,
    1. Your Time Machine should should do the full backup of your computer just once and then only diffrences between backups - whenever you plug in the drive.
    If that's not the case something is misconfigured.
    2. You can exclude folders (documents, pictures etc) from being backed up. This is in in Time Machine Options (right bottom corner.
    3. The drive is (most likely) indexed by Spotlight. However, provided those are backup files I would advise against browsing and searching them directly. This can damage the backup itself.
    4. I cannot work out the exact scenario you are using - but the ideal (proper one) would be to have all your music library on your computer and only backup on your external drive. This you should not have to browse and use until you need to restore files.
    5. If you keep your music library solely on the external drive - it should be not in the backup files.
    Also such practice is risky as all drives crash sooner or later and you will lose your music.
    Best would be to keep all music on the computer and backup onto your external drive.
    Or
    if the music library is too big for your computer you may keep it externally - but Isuggest you get one of the external hard dirves with RAID1 or higher. This will keep your music safer lest one of the drives packs up.
    Let me know if you want me to elaborate on any of the aforementioned.
    TZ

Maybe you are looking for

  • Protected View Error "The file is corrupt and cannot be opened"

    All  I have a problem with Protected View in Office 2010 on Windows 7. Symptom:  When downloading a file from the Internet, the file will not open if launched directly from the source location, or saved locally and then opened.  This is impacting bot

  • Samsung 906bw displaying greenish looking whites

    I cannot get the color on the 906 bw monitor to display properly. all the colors have a strange look to them, and the whites show up with a sort of greenish hue. samsung directed me to apple, and apple directed me back to samsung. nobody seems to kno

  • Urgent I am a beginner/ continued / Control Buttons

    Hi, I am very sorry I forget to mention in my past post that I also need control buttons that will make control of this audio and video tutorial (trackbar, play, pause, stop, volume button) and a timming that shows the time while playing the tutorial

  • Netgroup support in Mac OS X (Lion)

    Hello, We have a small network here with primarily OS X desktops and RHEL/CentOS servers. There is some discussion about adding some sort of central authentication/authorization server, with an eye to planning for future growth as well as gaining exp

  • Document library issue

    Hi All, When I am clicking on New button in document library getting compatibility error. Regards, Prasad.