Lost Sound / No Audio Device

I have a k7n415 Pro Board using on-board audio. Updated NVIDIA drivers on Windows Update Site, then lost all sound. Tried rolling back driver and still no sound. Device (NVIDIA NFORCE MCP Audio Processing Unit and Audio Codec Interface) shows in control panel/system/hardward with no conflicts. However, sound and audio system devices in control panel says "no audio devices."
I also tried to go back a day using Windows Restore point, but got a message that Windows could not restore back to that point.
I'm stumped. Does anyone have any suggestions?
Thanks!

I reinstalled drivers from disk that came with computer, but can still only connect at reduced speed settings.
MotherBoard: MSI k7n415 Pro (MS6373)
Award Bios 6.00 PG
CPU: AMD XP2200+
768MB DDR Ram
Power supply: Antec True Power 430 Watts
Video: NVIDIA GeForce4 Ti 4600
Storage Devices: Maxtor 6L080J4 (80 GB)
Maxtor 6Y160P0 (160 GB)
Maxtor 5 T040H4 SCSI Disk Drive (40 GB)
Maxtor 6 Y2500P0 SCSI Disk Drive (250 GB)
Plextor DVDR PX-708A
NVIDIA nForce MCP Networking Adapter
Windows XP Home 5.01.2600 Service Pack 2

Similar Messages

Satellite P30-145: Don't have an audio device in 'Sounds and Audio devices'

Hi guys,
I've only just fixed one problem with the help of one fantastic member but now I have another!
All of a sudden my speakers decide not to work!! I checked the volume etc and alll was fine but when I went in control panel>sounds and audio devices it says I don't have an audio device!!!
It worked fine this morning and I havn't done anything that could have done this.
These problems I'm having are all spontaneous, I don't know what's going on!
Does anyone know how I can fix this and does anyone suspect virus activity? (I have done a scan which said I don't have any)
I use a P30-145
Many thanks

Hi
Did you check the device manager?? Is the sound card listed properly in the device manager or some yellow exclamation marks appear?
Did you try to reinstall the sound driver? If not, please try it.
Of course I would also recommend to update the anti virus applications and to scan the system for virus and malware

Problems with sound drivers - audio device on high definition audio bus

i turned on my computer one day and the sound was gone. no "speaker" icon in the lower right-hand corner of the screen; no choices available via the "control panel: sounds and audio devices" icon. when i went to device manager, i saw "audio device on high definition audio bus" had a yellow exclamation mark. i saw some sites suggested downloading the realtek high definition audio, but that didn't seem to work -- and now i don't see the audio device on high definition audio line either.
any ideas? from what i've read, i gather this is a somewhat common problem but no solid way to fix this. i know something similar has happened to me a year ago but i was able to fix it somehow.
Solved!
Go to Solution.

Hello,
Have you tried installing the latest audio device drivers for your ThinkPad? If so, did that solve the problem?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Camera microphone dose not appeer at Sounds and audio devices properties

My webcam vista pro disappeered from the list of voice recording hardware in the Sounds and audio devices properties. I alradytried uninstall and reinstall, and it didn't work. how can I make my computer to recognize it's

There is no built-in microphone for Vista Plus either. The current selling webcam model that has built-in microphone is Live! Cam Optia AF and Live! Cam Voice. You can also use this comparison chart to see which webcam has built-in microphone.
http://www.creative.com/products/com...lect.asp?cat=4
Jason

Audigy , Sound and Audio Devices Properties 'No Audio Device' appears

<p class="MsoNormal">Out of the blue, in the Sound and Audio Devices Properties, on the Volume tab ?No Audio Device? appears.
On the Sound tab of Sound and Audio Devices Properties, my Default Device says ?Modem # Line play back and is my only drop down choice. I made no configuration changes or installed any new software, it just stopped working.
I have searched for solutions, to no avail. I have an ?!? next to the Microsoft Kernel Audio Mixer in Device Manager that upon re-install displays a message that there was a problem installing this hardware(MEDIA) I/O operation has been aborted because of either a threadd exit or an application request(both installing from driver folder and recovery CD).
I don?t particularly care what sound device I have, just one that works again. I?ve uninstalled the sound devices and let them re-install on reboot and have checked the BIO settings (I don?t have any sound related settings there).
In Admin Tools > Services ?Windows Audio? is started and set to Automatic. When I manually try to play a windows sound in the Sounds tab I get an error message that says my sound card may be in use.
Under Sound and Audio Devices in Device Manager I currently have(when I ?Show Hidden?):
-Audio codecs
-Legacy Audio Drivers
-Legacy Video Capture Devices
-Media Control Devices
-Video codecs
Don't know what else to try. Any help would be appreciated.

cesario85 wrote:
OK The sticky label says SB0240
Here's the screenshot:
[img"]http://www.strikeforceguild.com/temp-images/IRQs.gif" width="640" height="45[/img]
I have since tried putting in a different sound card (another soundblaster, I think a 28 model) and installed its drivers but had the same problems. Im having a go at using the onboard sound though, just to see.Message Edited by cesario85 on 09--2005 06:57 PM
Audigy shares IRQ with IDE controller and firewire controller. This is not good.
NOTE: I suppose you're running your PC on "Standard PC" -mode (since IRQ's >5 not showing). If so, you can try to assign IRQ for the PCI slot, Audigy is installed, manually from BIOS. See your motherboard manual page 4-26.
Can you check if your PC is running as "Standard PC" and not as "ACPI Uniprocessor PC" (Device Manager --> Computer). Make it "ACPI Uniprocessor PC" --> you get more IRQs (virtual) in use.
NOTE: You may need to reinstall OS to get this done.
Also you may need to enable APIC mode on BIOS.
How To:
A) Go to 'Device Manager' a short cut to get there is "Right Click" on the My computer Icon on your desktop (Control Panel --> System --> Hardware),
B) Next click on 'Computer', then double click on 'Standard PC'. Then select 'Driver' and then 'Update Driver'.
C) At this point you will see a screen pop up asking you to do this "Automatically" or Select 'Display a list of the known drivers for this device', - Choose this option.
D) Next you will see - 'Show all hardware of this device class'. Now you can select "ACPI Uniprocessor PC" in the list shown in the window to the right.
E) Now Windows needs/will re-start and re-install all hardware/ settings needed to run in this configuration.
.jtpMessage Edited by jutapa on 09--2005 0:23 PM

No sound and audio device not working properly, T61 vista

I unistalled the audio device SoundMax integrated HD audio because I had problems getting the mic of my new webcam (Logitech pro 9000) to work. But after reinstalling the SoundMax audio driver the audio device is no longer working.
Installing the SoundMax driver doesn't report any problems and the device manger also says that the SoundMax integrated digital hd audio device is working properly. But the speaker icon on the taskbar is crossed out. When hovering the mouse over the speaker icon it says Volume: 0 SoundMax integrated digital hd audio. When opening the Volume Mixer it says "No audio decivice is installed"...
I've completly removed all drivers and reinstalling several times but I cannot get it to work so I really need some help now.
All software + drivers regarging the webcam has been completly removed.
System data:
T61, Vista business
Audio chip seems to be a Analog Devices 1984
SoundMax driver version 6.10.1.5510 (latest available from lenovo)

Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop. This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP. The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
Let me know if that works for you.

Sound and audio device

hey i just format my Compaq C707TU laptop and its sound and audio driver not working, please suggest me for proper driver to install in my laptop.

Hi,
For XP:
Before Conexant Universal Audio Architecture (UAA) here
Conexant High Definition Audio Drivers here
This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
Open the Device Manager:
1. Click on Start and select Run. Now type devmgmt.msc and press enter.
2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
3. Select "Install from a list or specific location"
4. Click Next. Then select "Don't search, I will choose the driver to install"
5. Click Next and then select "Sound, video and game controller" from the list.
6. Click Next and then click Have Disk.
7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
Similarly install Modem Drivers:
Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
1.Right click on "Modem device on High Definition Audio Bus" and click Update driver.
2. Select "Install from a list or specific location"
3. Click Next. Then select "Don't search, I will choose the driver to install"
4. Click Next and then select "Modem" from the list.
5. Click Next and then click Have Disk.
6. Click Browse C:\swsetup\sp33890 folder and select the .inf (wis30b2b) file and click open and Continue with the onscreen instructions.
For Vista:
Conexant High-Definition Audio here
Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Tried the solution 'Sound and Audio Devices Properties Audio tab Default device' no sound!

Still no sound, everything greyed out and still saying bo sound device installed and it seems no sound card either

Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop. This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP. The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
Let me know if that works for you.

No active mixer devices, no sound, no audio devices

HP Pavilion dv5000, Windows XP Home Edition pre-installed. Have searched all over; seems to be a common problem but none of the available solutions I could find have worked (save for system restore, to which I haven't yet resorted).
Message Edited by insidervc on 09-23-2009 11:41 AM

2011.10.07
This may be an old reply, but I wouldn't advise a system restore. Tech support told my friend to do this with his laptop and it never worked the same again, i.e. made the situation worse. He was trying to get a high spec game to play better, but after tech supports suggestion of system restore no game worked, i.e. were so slow that were un playable.
hope this helps for the future.....
d

*FIXED* No sound and 'No Audio Device' in Control Panel. *FIX

I?m having a problem with my sound. Basically all I get is a system sound, which means no sounds from itunes but the error prompt sounds still play. I?m tempted to say that this is a detection issue because of several things:
-First, when looking in the ?sounds and audio devices? in the control panel I get grayed out selections and a ?no audio device?.
-Secondly, when running the directX diagnostic tool (typing ?dxdiag? in the ?run? window) I get several troubling indications. First under device I have no manufacturer or product ID. Second under drivers I have (copied from dxdiag text file):
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8//2006 4:45:38, 499584 bytes
Other Files:
Seems hunky-doorey but then I have a note at the bottom that reads:
Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
I have seen another similar post that seemed to have the same problem, but they didn?t provide much information and the fix was to pull out the audio card, run start up, turn it off, and then put it back in and run start up. If this is what needs to be done, could I have a picture or something of what the sound card looks like?
This problem started when I tried to update my sound card and since then my sound has been? possessed? or prone to working at sometimes and then (most of the time)failing at others.
Here is the dxdiag.txt file without the lengthy directShow filters and directx components:
System Information
Time of this report: 5/9/2007, 2:8:45
Machine name: GURU7892COMPUTE
Operating System: Windows XP Home Edition (5., Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension XPS
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz (2 CPUs)
Memory: 022MB RAM
Page File: 436MB used, 2026MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.280 32bit Unicode
DxDiag Previously: Crashed in system information (stage 3)
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab : No problems found.
Sound Tab : DirectSound test results: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9800 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9800 PRO AGP (0x4E48)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_002&DEV_4E48&SUBSYS_3002002&REV_00
Display Memory: 28.0 MB
Current Mode: 52 x 864 (32 bit) (75Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 600,200
Driver Name: ati2dvag.dll
Driver Version: 6.4.000.6660 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/6/2006 9:50:46, 26368 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 2/6/2006 9:50:29, 98464 bytes
Device Identifier: {D7B7EE2-0D08-CF-B669-080AC2CB35}
Vendor ID: 0x002
Device ID: 0x4E48
SubSys ID: 0x3002002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C-6FB7-44F5-908-056BF2EE449D}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{552C0DAD-CCBC-420B-83C8-74943CF9FA6}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: SB Audigy 2 Audio [CF00]
Default Sound Playback: Yes
Default Voice Playback: No
Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_00302&REV_04
Manufacturer ID:
Product ID:
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8//2006 4:45:38, 499584 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Standard
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 92000
Static/Strm HW Mix Bufs: 64, 62
Static/Strm HW 3D Bufs: 64, 62
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
Sound Capture Devices
Description: SB Audigy 2 Audio [CF00]
Default Sound Capture: No
Default Voice Capture: No
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
Date and Size: 8//2006 4:45:38, 499584 bytes
Cap Flags: 0x4
Format Flags: 0xFFF
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: .00.006.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
SB Audigy 2 DirectMusic Synthesizer [CF00], Hardware (Kernel Mode), Output, DLS, Internal
SB Audigy 2 Audio [CF00], Software (Kernel Mode), Output, DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Mouse
Attached:
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached:
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x24D7
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:42, 57600 bytes
| Driver: usbd.sys, 8/29/2002 03:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Logitech PS/2 Keyboard
| Matching Device ID: *pnp0303
| Upper Filters: L8042Kbd
| Service: i8042prt
| Driver: i8042prt.sys, 8/3/2004 23:4:36, 52736 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
| Driver: L8042Kbd.sys, 2/0/2004 2:47:58, 3056 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
|
+ HID-compliant MX58 Optical Mouse
| Vendor/Product ID: 0x046D, 0xC0E
| Matching Device ID: hid\vid_046d&pid_c0e
| Upper Filters: LMouKE
| Lower Filters: LHidKE
| Service: mouhid
| Driver: mouhid.sys, 8/7/200 3:48:00, 260 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
| Driver: LHidKE.Sys, 2/0/2004 2:48:46, 24704 bytes
| Driver: LMouKE.Sys, 2/0/2004 2:48:40, 68992 bytes
| Driver: KHALMNPR.Exe, 2/0/2004 2:45:26, 4952 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM
DirectPlay8 Serial Service Provider: COM2
DirectPlay8 TCP/IP Service Provider: Wireless Network Connection - IPv4 -
DirectPlay Voice Codecs
Voxware VR2 .4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.0 3 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Age of Empires II (DX7) - Registry: OK, ExeFile: Empires2. ICD (0.4.0022.072)
Age of Empires II - The Conquerors Expansion (DX7) - Registry: OK, ExeFile: \age2_x.icd (0.07.0025.064)
Dungeon Siege 2 (DX7) - Registry: OK, ExeFile: DS2.icd ()
Dungeon Siege II Demo (DX7) - Registry: OK, ExeFile: DS2.icd ()
MechWarrior Black Knight (DX7) - Registry: OK, ExeFile: MW4x.exe (45.05.000.070)
MechWarrior Vengeance (DX7) - Registry: OK, ExeFile: MW4. ICD (.30.0004.908)
Star Wars JK II Jedi Outcast (DX7) - Registry: OK, ExeFile: jk2mp.exe ()
WDM Streaming Data Transforms:
Microsoft Kernel Acoustic Echo Canceller,0x00000000,0,0,,
Microsoft Kernel GS Wavetable Synthesizer,0x00200000,,,,5.03.2600.280
Microsoft Kernel DLS Synthesizer,0x00200000,,,,5.03.2600.280
Microsoft Kernel DRM Audio Descrambler,0x00200000,,,,5.03.2600.280
Video Compressors:
WMVideo Encoder DMO,0x00600800,,,,
WMVideo8 Encoder DMO,0x00600800,,,,
MSScreen encoder DMO,0x00600800,,,,
WMVideo8 Encoder DMO,0x00600800,,,,
WMVideo9 Encoder DMO,0x00600800,,,,
MSScreen 9 encoder DMO,0x00600800,,,,
DV Video Encoder,0x00200000,0,0,qdv.dll,6.05.2600.280
Indeo? video 5.0 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
Indeo? Video 5.2 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.05.2600.274 9
3ivx D4 4.0.4,0x00200000,,,qcap.dll,6.05.2600.280
Cinepak Codec by Radius,0x00200000,,,qcap.dll,6.05.2600.280
DivX ;-) MPEG-4 Low-Motion,0x00200000,,,qcap.dll,6.05.2600.280
DivX ;-) MPEG-4 Fast-Motion,0x00200000,,,qcap.dll,6.05.2600.280
DivX? 6.. Codec (2 Logical CPUs),0x00200000,,,qcap.dll,6.05.2600.280
Intel 4:2:0 Video V2.50,0x00200000,,,qcap.dll,6.05.2600.280
Intel Indeo(R) Video R3.2,0x00200000,,,qcap.dll,6.05.2600.280
Intel Indeo? Video 4.5,0x00200000,,,qcap.dll,6.05.2600.280
Ligos Indeo? XP Video 5.2,0x00200000,,,qcap.dll,6.05.2600.280
Intel IYUV codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft H.26 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft H.263 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V2,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V3,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft RLE,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft Video ,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft Windows Media Video 9,0x00200000,,,qcap.dll,6.05.2600.280
XviD MPEG-4 Codec,0x00200000,,,qcap.dll,6.05.2600.280
DivX? 6.. YV2 Decoder,0x00200000,,,qcap.dll,6.05.2600.280
Audio Compressors:
WMA Voice Encoder DMO,0x00600800,,,,
WM Speech Encoder DMO,0x00600800,,,,
WMAudio Encoder DMO,0x00600800,,,,
Indeo? Audio Software,0x00500000,,,iac25_32.ax,2.00.0005.0054
Vorbis Encoder,0x00200000,,,OggDs.dll,0.09.0009.0005
IAC2,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie CELP 4.8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 2kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 6kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
IMA ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
PCM,0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode2),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode3),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode+),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode2+),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode3+),0x00200000,,,quartz.dll,6.05.2600.2749
Microsoft ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
ACELP.net,0x00200000,,,quartz.dll,6.05.2600.2749
DSP Group TrueSpeech(TM),0x00200000,,,quartz.dll,6.05.2600.2 749
Windows Media Audio V,0x00200000,,,quartz.dll,6.05.2600.2749
Windows Media Audio V2,0x00200000,,,quartz.dll,6.05.2600.2749
GSM 6.0,0x00200000,,,quartz.dll,6.05.2600.2749
Messenger Audio Codec,0x00200000,,,quartz.dll,6.05.2600.2749
Microsoft G.723.,0x00200000,,,quartz.dll,6.05.2600.2749
CCITT A-Law,0x00200000,,,quartz.dll,6.05.2600.2749
CCITT u-Law,0x00200000,,,quartz.dll,6.05.2600.2749
MPEG Layer-3,0x00200000,,,quartz.dll,6.05.2600.2749
Midi Renderers:
Default MidiOut Device,0x00800000,,0,quartz.dll,6.05.2600.2749
WDM Streaming Capture Devices:
SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
WDM Streaming Rendering Devices:
SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth A [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
Microsoft DVBC Network Provider,0x00200000,0,,msdvbnp.ax,
Microsoft DVBS Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
Microsoft DVBT Network Provider,0x00200000,0,,msdvbnp.ax,
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,,0,psisrndr.ax,6.05.2600.280
MPEG-2 Sections and Tables,0x00600000,,0,mpeg2data.ax,
WDM Streaming Mixer Devices:
Microsoft Kernel Wave Audio Mixer,0x00000000,0,0,,
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,,0,encdec.dll,6.05.2600.280
Encrypt/Tag,0x00200000,0,0,encdec.dll,6.05.2600.280
XDS Codec,0x00200000,0,0,encdec.dll,6.05.2600.280
Audio Renderers:
CyberLink Audio Renderer for Dell,0x00200000,,0,cladr.ax,3.05.0000.2409
Default DirectSound Device,0x00800000,,0,quartz.dll,6.05.2600.2749
Default WaveOut Device,0x00200000,,0,quartz.dll,6.05.2600.2749
DirectSound: SB Audigy 2 Audio [CF00],0x00200000,,0,quartz.dll,6.05.2600.2749
WDM Streaming System Devices:
SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth A [CF00],0x00200000,0,2,,5.03.2600.280
SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Audio [CF00],0x00200000,2,2,,5.03.2600.280Message Edited by guru7892 on 05-20-20072:43 PM
Message Edited by guru7892 on 05-24-200705:55 PM

I found that once you reinstall your sound card you need to make sure you hook everything back up correctly.
basically all you need to do is run a start up with your sound card out ofyou computer and then re-run start up with the card back in.

Have no sound and says there is no audio device

last week i had some problems with my computer, those got fixed, but now my sound dosent wanna work. i checked everything, mute isnt on, my speakers are plugged in, all the small stuff is checked. i installed drivers and all that and still no sound...in sound and audio devices i cant click on anything and it says "No Audio Device"..could it be my speakers are fried? or my sound card?...need help bad....thanks

DonVito,
What sound card and OS are you using? You could try this. Remove the sound card from the computer and boot up the computer without the sound card in the computer. Let Windows finish loading and then have it shutdown. Slot back the sound card to the PCI slot and boot the computer.
Jason

Sound Blaster Live! 24 "no audio device" no so

I tried to install the driver with autoupdate it installed fine but there is no sound and in "Sounds and Audio Device Properties" it says "no audio device" but the driver is installed in device manager.
specs
nf6v
built on realtek hd audio ALC86: disabled in bios
Sound Blaster Li've! 24-bit
Windows XP sp2
Thanks

I just got this card.
first I installed
Filename: SB24_VTDRV_LB__04_0077.exe
This suite of drivers and applications has been updated and combined for your convenience. It installs the following applications to control your audio device's settings. For more details, read the rest of this web release note.
Applications included in this release:
* Creative Audio Console (for Windows Vista? only)
* Creative Device Control
* Creative EAX Console
* Creative Speaker Settings
Added Features or Enhancements:
* Enables 44. kHz sampling format for SPDIF In and Out.
Requirements:
* Microsoft? Windows Vista 64-bit, Windows Vista 32-bit, Windows? XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
* Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Notes:
* This pack is only for the Creative Sound Blaster audio devices listed above.
DO NOT install this pack for Sound Blaster Li've! 24-bit External.
* To install this pack
. Download the file onto your local hard disk.
2. Close all other Windows applications.
3. Double-click the downloaded file.
4. Follow the instructions on the screen.
THEN I installed this driver
Filename: SB24_WEB64_LB__04_0055.exe
This standalone driver provides Microsoft? Windows? XP Professional x64 Edition, Windows XP Service Pack 2 (SP2) and Windows 2000 Service Pack 4 (SP4) support for your Sound Blaster? Li've! 24-bit and Sound Blaster Audigy? LS internal audio card.
Requirements:
* Windows XP Professional x64 Edition, Windows XP SP2 or Windows 2000 SP4
* Creative Sound Blaster Li've! 24-bit or Sound Blaster Audigy LS audio card
Notes:
* The contents of this driver are similar to those in your original installation CD, with the addition of Windows XP Professional x64 support.
* This driver does not support USB Sound Blaster Li've! 24-bit External audio devices.
* To install this driver:
. Uninstall any existing audio device drivers before installing this driver.
2. Close all other Windows applications.
3. Launch the Creative Sound Blaster Li've! 24-bit and Audigy LS driver.
4. Follow the instructions on the screen.
5. Restart your computer to complete the driver installation.
* Subsequently, please download the Creative Basic Audio Suite for Creative Sound Blaster audio devices :
. Launch Creative Basic Audio Suite for Creative Sound Blaster audio devices.
2. Follow the instructions on the screen.
3. Restart your computer to complete the driver installation.
the card works fine in linuxMessage Edited by wuhlei on 0-27-200709:36 AM

Sound is missing after start-up, disable/re-enable of the audio device required

Hi,
I have a MSI K8N Diamond with onboard Creative Live 24! sound.
Since last weeks I have a strange problem with the sound; when I start-up the PC after some hours of inactivity, I have no sound at all. I tried to see what's happening or to find a workaround and I discovered that I can get the sound back by disabling the audio device from the control panel, restarting the PC and then re-enabling the device.
To explain the phrase "I have no sound" I can say the following: when I go to the control panel and open "Sounds and Audio devices", everything seems OK. But when I try to test for example the sound that will be used for the "Asterisk" (or whatever else), the small back triangle next to the sound name turns to a black square (normal) AND REMAINS BLACK SQUARE FOR EVER... (while normally it should turn again into a triangle within some seconds).
I re-installed XP and all the updates from Microsoft, but the problem is still there. I checked the "event viewer" but there is nothing relevant. I also tested both the original drivers from my CD and the newer ones from the MSI site.
Do you think this could be a hardware problem? An IRQ conflict probably? (I've seen that Creative uses the same IRQ with Sil3132). Any other ideas?
Thank you,
Petros

So you reckon it to be a hardware issue...
OK, I'll open the case in the afternoon and have a good look inside. It's true that recently I did some work (added memory, changed a HD) so probably it deserves some time to see again if everything is in tact inside.

No audio device on windows xp with SB0

Hello, I've a SB0060 with a cd version that does not install on windows xp. I've always had problems installing this card on windows xp but once I've managed to install it.
I was upgrading the driver to try to fix some bugs with TeamSpeak and lost all sound.
I've tried to install again the SB0060 but couldn't get it to work.
I've tried with:
SBLi've5XPDrvUpdate.exe
Li'veDrvUni-Pack(ENG).exe
Li'veDrvPack_Patch.exe
Li'veDrvPack.exe
All of the drivers install on windows xp BUT in the "sound and audio devices" gives me the finger with "no audio device".
In the device manager, No conflits, No troubles, No Shared IRQs, NOTHING! This is really driving me crazy.
Is there any driver or HowTo install this card in the web? Any fixed stuff or people with the same problem?
Please help.

Try the CD from here instead.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677

Trouble with Audio Console "Unable to find Audio device.

I have an Audigy 2 ZS Platinum and run XP Pro. Recently lost my install CD when moving back to school (crap...)
I was able to download and install the drivers for the card from creative. Windows Hardware manager says the device is working properly (more accurately the many devices associated with the sound card) and I know the device is functioning (at least in part) because I am able to play music through the digital optical out on the dri've bay panel.
At this point I am trying to install Audio Console.
I have downloaded and installed Audio Console from creative's website and then restarted my computer. Upon trying to launch the program the following message appears in a pop up:
"Unable to find Audio device. Please make sure that your audio device is enabled and installed with it's driver. This application will be closed."
I have checked 'Sounds and Audio Devices' in the control panel and it has "SB Audigy 2 ZS Audio [B400]" for all selected audio devices.
What's the problem here? Has anyone encountered this problem before?
The Audigy 2 ZS Platinum is listed as compatible with the Audio Console software.
Thanks for any help you can offer!

jsilverman wrote:
I have an Audigy 2 ZS Platinum and run XP Pro. Recently lost my install CD when moving back to school (crap...)I was able to download and install the drivers for the card from creative. Windows Hardware manager says the device is working properly (more accurately the many devices associated with the sound card) and I know the device is functioning (at least in part) because I am able to play music through the digital optical out on the dri've bay panel.At this point I am trying to install Audio Console. I have downloaded and installed Audio Console from creative's website and then restarted my computer. Upon trying to launch the program the following message appears in a pop up: "Unable to find Audio device. Please make sure that your audio device is enabled and installed with it's driver. This application will be closed." I have checked 'Sounds and Audio Devices' in the control panel and it has "SB Audigy 2 ZS Audio [B400]" for all selected audio devices. What's the problem here? Has anyone encountered this problem before?The Audigy 2 ZS Platinum is listed as compatible with the Audio Console software. Thanks for any help you can offer!
Thanks to BadBoy, you can find the link to download the A2Zs Installation CD from HERE
.jtp

Lost Sound / No Audio Device

Similar Messages

Maybe you are looking for