Lost sound on all sites

suddenly lost all audio on all programs

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If that isn't the case then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

After Firefox updated itself to 3.6.12 I lost sound regarding all facebook applications

after Firefox updated itself to 3.6.12 I lost sound regarding all facebook applications and videos. I have installed the latest flash and that doesn't solve the problem

After Firefox updated to 3.6.12, my homepage stated that I did not have the Flash Player installed. The latest player was installed, but I uninstalled and attempted to re-install. The installation process worked, but the Adobe Flash banner on their page does not Flash like when a proper install occurs. The Adobe DLM add on will not allow me to change options on Firefox Addon page. Now Flash content on homepage will not play, and I am forced to use IE to view content.

TS3274 I lost sound to all my games what do I do?

I Lost sound to al my games..how o I get it back

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

IPad3 lost sound for all apps.

My ipad3 sound works with headphone but not speaker
Any more. Tried many ways but still not working. Reset ,restart ...
Need to found out what to do.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPad. Nothing will be lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPad.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

Since updating to IOS 5.1.1 on my iPad 2 I have lost sound on all my apps through the speakers, still there on earphones and music plays normally, any ideas?

I installed the latest update yesterday and today my music plays fine but all of my apps only have sound through my earphones and nothing at all throu the speaker. Is anyone else having the same problem? How do I get it fixed?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music/iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

My ipad1 lost sound for all games but works fine for music, movies, etc. Thoughts?

any suggestions?

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Lost sounds of all kinds

I'm not new to using the Iphone and I'm having some issues getting noise on my phone. I have no clicks, not music playing when I play ipod. I checked everything...even the mute button. I also have reset the phone through itunes. I recently updated the phone as well. Any suggestions.

This has happened to me a couple of times. It was solved after I plugged and unplugged a headset. It appears I am having issues with the switch in the headset plug.

After download an application from the app store on my iPad i lost all sound for all my application, how do i sought this out?

i lost sound for all my application on my ipad 3, how do i resolve this problem

Is it all apps or do Music and Videos apps still have sound ? If they do then have you got notifications muted ? Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

I lost sound. In systems/sound all options are greyed out

I lost sound. In systems/sound all options are greyed out

Try resetting your SMC http://support.apple.com/kb/HT3964 Then make sure in system prefs/sound/output that you've selected internal speakers.

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I manage my site (containing all the media) in order to upload it to a server?
2.- Is there a Adobe Muse community in spanish language?
Thanks for your help
Mauricio444

Kevin is suggesting that you store the projects you create while working through his book in a folder called RoboHelpProjects. It is not where you have to store every project you ever create.That is for the purposes of his book.
RoboHelp initially defaults to My RoboHelp Projects but it's up to you whether you do. Generally on the forums we advise against that as it is part of your profile and can result in excessively long path names in a few cases. Generally where authors create file names that are so long they almost serve as the content.
Projects always have a root folder, call them Project 1 and Project 2 for this purpose. You can have those folders directly off your C drive (or other local partition) or within in a parent folder as above.
Now to what you can and cannot do. You can delete a whole project by selecting Project 1 or Project 2 in Windows Explorer. Obviously if you delete the parent folder you will delete all your projects within.
What you must not do is delete individual files within a project using Windows Explorer, for that you use RoboHelp's Project Manager. The exception is if you go to Tools > Reports there is a report Unused Files. Files listed there will have to be deleted using Windows Explorer for the very good reason they do not appear in Project Manager and, therefore, cannot be deleted that way.
If you think about it, it is similar to Word. There is no option to delete a document there other than using File > Open and right clicking. Not very intuitive.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

TS3274 my ipad 2 suddenly lost the sound. all else works.

my ipad 2 suddenly lost the sound. all else works.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

After installing Flash Player, I lost sound on Youtube and other sites. How do I fix it?

After installing Flash Player, I lost sound on Youtube and other sites. How do I fix it? I still have sound on some apps.

To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
Thanks,
Chris

EXTREME distortion (Almost no sound at all) from right and left speakers -Please He

Hi, since no one responded to the post I put out months ago... I'll post this again:
I recently re-installed windows on my PC (a Dell XPS 400) and lost all my drivers. After installing Windows and the drivers for my Soundblaster X-Fi all of the speakers worked other then my front-left and front-right ones. (My speakers are a logitech 5. surround sound package by the way) I have also tried plussing the two front speakers into other devices and they worked, so its not the speakers.
I've even now tried using this card on other operating systems and using different sound cards. I have installed ALL the latest drivers, so I am stumped what the problem could be other then a faulty sound card.Message Edited by beilstudios on 2-9-2006:49 AM
Message Edited by beilstudios on 2-9-2006:57 AM

I hear you about wanting to use your memory on your 64-bit machine, I feel the same way. I only suggested this as a test to verify the cause of your problem. I wish I had returned my X-Fi Elite Pro as soon as I started encountering problems. I have been using my onboard sound in the meantime and while it is nothing spectacular, at least it works.
I recommend returning your Elite Pro (unless a BIOS update works or Creative has anything to offer), and if you still have interest in it, wait for others outside of Creative to verify that it is at least minimally working before going back.
Creative hasn't shipped a new driver for the Elite Pro since last November, to give you an idea about the kind of wait you might be in for. I certainly didn't expect it to take this long. So I have a really expensi've sound card just sitting there waiting for a new driver which for all I know won't even address the problem.

Importing to I-Movie - lost sound AND video

Hi.
I have a feeling this has already been answered but here goes:
I recorded some video on my Sony still camera in MPEG format (.mpg files). They worked fine in I-photo. When I imported them into Imovie though, I not only lost sound but it would seem vision. They are now .mov files but don't play?
The scroller moves, but the picture doesn't change, it just zooms in on the first frame (like a slide show) and there's no sound.
I am not very techie, and new to Macs. Can anyone please tell me how to solve this, and have I lost the content on the files I transferred into IMovie?
I transferred them into Imovie so I could compress them for web use on my blog.
I have already downloaded Streamclip in case I need that, though I don't know if I have to open/mount/unzip it or anything like that.
Many thanks in advance for any assistance.

Hi, sorry for the delay in coming back to you.
Right, since we spoke I met a guy who said:
Streamclip WILL be enough for me and it will work. He said my camera will be using MPEG-1 and so I will be fine. If I had an MPEG-2 (professional?) camera it would be more complex and I would need to buy that Apple component.
So I downloaded it. The next step will be learning how to use it! That's going to be a whole different ballgame. If you have any links to an easy step-by-step guide, that would be awesome? RE the external drive, I'm downloading my MPEG's via USB cable onto the hard drive before I do anything at all.
Thanks for your post

TS3212 something is wrong with my itunes, none of my 4 ipod devices show up when i try to connect them to itunes. but they do light up and show that they are charging, and two have lost sound...

ok, so two of my devices have lost sound the first was about 2 years ago, but i kept the device because i could still use it for other things, then i got a " new to me" ipod about 6 months ago, and it too has, within the last two days, lost sound, and while trouble shooting these issues i have been trying to restart/refresh/whatever one of them and now none of the 4 devices that i have is shouing up on my itunes!!! this is verry upsetting since the others didnt have any problems, and i really dont want to pay $ for a fix. do not have the money for that, nor do i expect this kind of thing to happen to me more thann once.
i have gone through all the diagnostic tests with my computer and each ipod multiple times, even trying to reverse the order in which i perform the steps, as a last resort, making no progress. i have downloaded new versions of itunes 5 times within the last 3 hours and restarted my computer 7 times. my devices do not show up in "my computer" but they do display as charging when i plug them into the usb port, and to wrap up i have tried using all 3 usb ports on my computer to do this.
please do not post that i should restart my computer or that i need to restart my device! please do not tell me to go to an apple store or buy a new device! but all other help/ ideas will be greatly appriciated.
thank you

Clean the dock connectors.
Try different sync cables.

Lost sound on all sites

Similar Messages

Maybe you are looking for