Lost System RFC-Connects

Hi folks,
due to whatever reasons essential standard rfc-connections shipped with the system are now missing in our SolMan, R/3 and BI environment. Examples: SAPOOS, SAPNET_RTCC, SAPNET_RFC, to name but a few. This means that I have to find a way to rebuild them somehow, since some of them use SAP users to establish the particular connection.
Suggestions?
Best regards,
Th. Müller

... a typo! Sorry.
It should have been SAPOSS of course. And, yes, I did search the Marketplace. Obviously SAP aren't prepared for nutjobs who delete rfc-connections "for security reasons".
Anyway, thanks for the time.
Th. Müller
Edited by: Thorsten Müller on Oct 6, 2010 11:24 AM

Similar Messages

Source System - RFC Connection

From RSA1 if I go to a source system in B/W, right click and choose the check option, I get an error message which says BW Unknown in source system. I think this is indicating that the RFC is not set correctly. I have gone to another B/W which also accesses the same Source System and have done a check and the connection is fine.
If I right click the Source System and select Change in both B/W systems everything is identical except the name entered for the Target Host. If I ping both names the IP address is identical though. Would the Target Host name cause an issue? If not can someone advise on the steps to fix the RFC? Thanks

Niten,
Most likely, IDOC settings on the source system side are not correct. Ensure that the source system is open and you have authorizations to maintain ALE settings. After that right click on the source system and select activate. If that does nto work, try restore.
Aneesh

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

RFC connections do not work after system restart

Hi PI experts!
We're facing a problem with our PI 7.0 system. After each restart of the system, all RFC sender communication channels do not work. When testing the connection in the sending SAP system, the connection test fails. Currently we workaround the issue by manually restarting the RFC adapter after system restart.
Does anybody has any idea how th fix that problem? <<text removed>>
Cheers,
Matthias
Edited by: Matt on Apr 29, 2009 3:26 PM - don't offer points

Mathias,
Your problem is due to the fact that SAP is not up and running when XI restarts.
there is a parameter in RFC adapter that you can modify in order to fix that
Please, see the following link and let me know: /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue
best regards,
David

Unable to open RFC connection to SAP System NSP

Hi all,
During installation i am getting an error which is as follows,
"Unable to open RFC connection to SAP System NSP.
Solution: Start the system."
And the second problem is that there are no connections shown in SAPGUI.
Please help me out.
Thanking you,
Kranthi

HI Kranthi,
Have you checked this thread NW Preview Installation error?
Regards

RFC connection to source system is damaged , no Metadata uploaded

Hello Friends,
I need your help to understand and rectify why my transport is failing again and again.
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata upload
Environment - Production Support (Dev - Quality - Testing - Production)
Alive scenario - Need to create two InfoObject and incorporate the fields in to data targets and reports.
What we have did?
1st request - We have created new request and captured two Infoobjects in to the request.
2nd Request - We have captured the replicated Datasource along with that the below sequence displayed by default in the same package.
Communication structure
DataSource Replica
Transfer Rules
InfoSource transaction data
Transfer structure
3rd Request - we have captured DSO and Cube only in this request.
4th Request - Captured 2 update rules (ODS) Update Rule (Cube)
The above 3rd request failed in the testing system (successful in Quality System) and ODS is inactive in the Testing system.
Testing system Error Message:
The creation of the export DataSource failed
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object ZEOINV09
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/AZEOINV0900)
Table /BIC/AZEOINV0900 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/AZEOINV0900 has not been activated
Error when resetting ODS Object ZEOINV09 to the active version
So we have captured the data mart Datasource and created a new( 5th ) request (transported only 5th request )and transported in the below sequence
Communication structure
Datasource Replica
Transfer Rules
Infosource transaction data
Transfer structure
development to Quality - Successfully
Failed in testing system again.
How to rectify this error, please help us
Thanks,
Nithi.

Hello All,
*Question -1*
I have checked the connections and typed the steps below - what i have seen in the screen.
Steps :
R/3 Connection - I have double clicked on the BT1CLNTXXX and tested the connections.
Connection Type :
Logon - 0KB , 10 KB , 20KB, 30 KB
R/3 connection:
5 msec, 0msec, 1msec,1msec,1msec
Please let me know whether RFC connection is OK or not.
Question - 2
I want to know is there is any option to check before transporting the TR from Developement to Quality - "Preview Check " the sequence , so that we can avoid the Transport failure because of TR sequence.
Regards,
Nithi.

Creation of System Landscape though SMSY and RFC connection

Hi all,
I've finished install the solution manager 4.0 with Oracle 10g running on Windows Server 2003.
i would like to know after i create the RFC connection using SM59 to my TST system which will be the system that i'd plan to monitor. The authorization test seem to be failed but others connection like connection test and remote logon seem to working fine.Please kindly advise which sort of user i need to give. I receive the message "Error Details-You are not authorized to logon to the target system (error code 1)."
And at the SMSY, i cant even see the TST system.And i don know where we should create the TST system. And i wuold like to know where i can make changes to the Technical data tab for my solution manager ipaddress,beacase it has tied up to the Microsoft loopback connection.
Please kindly assist.Thank you.
Kah Fei

Go to transaction SMSY
Here, towards the left hand side you will see menu with tabs of 1. Landscape Components
        2. System and Logical Components
        3. Product Definitions
        4. Overview
Select the second tab.
It will show list of all SAP Products available, if you are linking an SAP R/3 system to Solution Manager, then select the SAP R/3 from the list. And if you have already created the server and its details, they wil appear in the list here.
Try this out.
Thanks,
Anil Santhapuri

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

No trusted/login RFC connection for system BCP in TA SMSY

Hi,
i got this error Early Watch Report for only production System.
No trusted/login RFC connection for system BCP in TA SMSY
Amit

HI,
I hope the error message is straight forward.
Please Check whether you have established RFC connections to the BPC system and the same is avaiable under the RFC connections in TRXn SMSY-Your system -.Test the connections in SM59-BPCs-> READ and Trusted RFCs.
If its not present, Generate the RFCs again manually.
Hope this helps.
Revert for any issues.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Oct 9, 2009 3:24 PM

System copy : how to backup your rfc connections, partner profiles ...

system copy : how to backup your rfc connections, partner profiles (we20) amd ports in IDOC processing (we21) ???
Hi forum,
if you want to copy your production system to your quality assurance system you can export users and later on reimport
it to save work. That's good.
But how about RFC connections, partner profiles and ports in IDOC processing ? Anyway to export and reimport it later on ?
Thank you for your help.
Kind regards
O.Eggert

Hi forum,
in the meantime I found out how to handle this matter. May be this solution is not very elegant, but it works.
As for RFC-Connections there are several tables beginning with rfc. e.g., rfccheck. But 4 of it only differ from one system
to the next. These are rfcdes, rfcdoc, rfcattrib and rfccheck. What I did is the following : I used
brspace -u sapsr3/<password> -f tbexport -t "RFC3"
and quite simply exported these tables. Then I deleted some of the RFC-Connections, both ABAP and TCP/IP. After reimporting
what I exported before all these destinations were availlable again. As for ABAP the password had to be reentered but this
can be avoided, too. Have a look at transaction /nsecstore. The tables behind it are RSECTAB and RSECACTB, rspectively.
Export it after having exported the rfc* tables and reimport it after having reimported the rfc* tables. Very important : enable
the option "consistent export" !!!
It worked this way although there might be better and more elegant solutions.
As for transaction we20 check sap not 182172.
Hope that I could be of profit to this forum.
Kind regards
Olaf Eggert
p.s.
import command : brspace -u sapsr3/<password> -f tbimport.
Them select what you exported before.

RFC connection for nonSAP system

Hi all
i want to send and receive data from b/w SAP and NON-SAP systems. plz tell me which type of RFC connection i will use.
Regard
Imran Khan

Imran,
Check the attached link.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a]
Manoj

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Load balance for HTTP Connection to ABAP System (Type H) RFC connection

Experts,
For proxy we are using HTTP Connection to ABAP System (Connection type H) RFC connection in PI to get connected to ECC. I only see the option to use Target host in the Target system settings than Load balance option. In general ABAP Connection (Connection type 3) has Load balancing status option in Target system settings.
My requirement is I should use a logon group with the message server when PI connects to ECC. How can we achieve this? At the moment I can only use the Central Instance or any dialog server (App server) in RFC but not a logon group.
Thanks in advance.
Mahesh

Hi Naga
Could you check the link below?
http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/c5935087b62d66e10000000a42189c/content.htm
https://service.sap.com/sap/support/notes/1040325

RFC connection to source system ABPCLNT310 is damaged

Hello,
I'm importing a transport in BW Prod (condition type data for billing and orders), but receive this error message in STMS:
The creation of the export DataSource failed
Reading the Metadata of 0SD_O05 ...
Creating DataSource 80SD_O05 ...
RFC connection to source system ABPCLNT310 is damaged ==> no Metadata upload
RFC connection to source system ABPCLNT310 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Error when activating ODS-objekt 0SD_O05
The creation of the export DataSource failed
The import worked fine in BW QA system. Why do I get this error? It is possible to manually generate the export data source from the ODS object, but when I try to import again, it once again fails...
Best regards,
Fredrik

hi Fredrik,
check if helps oss note 597326, 886102, 184322
RFC connection to source system Damaged
Error when transporting ODS Object
597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again

EWA RFC connection SETUP - From Customer system to VAR solution Manager

Hi,
we are going to setup the EWA for our customers. So how I have to create the RFC from the customer system to our Solution Manager?
Thanks
Andrea

>
Andrea Taccolini wrote:
> we are going to setup the EWA for our customers. So how I have to create the RFC from the customer system to our Solution Manager?
Hi Andrea,
Have you already tried to use SMSY to generate the "Back" Destination from customer system to your SolMan?
Once you have selected the customer system in SMSY, you are able to use the RFC connection wizard.
Alternatively, you can define the RFC destination manually.
For easier tracking and trouble shooting, I would recommend to setup a communication user in your SolMan for each individual connected managed customer system.
Assign the appropiate profiles to the user in your SolMan system and create the RFC destination in the managed customer system.
Best regards,
Ruediger

Lost System RFC-Connects

Similar Messages

Maybe you are looking for