Lost the ability to browse any NAS or Servers

Hi,
At school we have a NAS and a fileserver. My MBP has been connecting without any issues to these until yesterday. All of a sudden I cannot get access to them, and an error comes up stating that the server is unavialable or the IP address has changed. I have restared both the mac and fileserver and NAS - but still no luck. It connects with SMB protocol - and that was added to a favorite in my servers list and is unchanged. Also - I failed to connect to a NAS at home last night. I can't browse to it from the finder either. I am totally lost as to why I have suddenly lost all ability to browse any network attached storage.

Thanks for your help. The setup basically is straight forward. We have one network at school (mainly windows pcs) and there is a Windows File Server machine on the network that has been used for a while to hold files. We recently also bought a D-Link NAS as well (a bring your own disk type NAS). All are on the same network. Everything has been working faultlessly until yesterday - then error after error. The windows are able to connect fine to the fileserver - no problem. What throws me a bit is that I could not connect to my own NAS at home either. I was convinced yesterday that the fault was to do with the school network - so thought I would restart everything overnight (forgot anyway!!) but when I saw that the same issue that was at school was happening at home - realised that the issue was on the MBP.

Similar Messages

I have recently lost the ability to connect my ipad to Apple TV. Any thoughts?

I have recently lost the ability to connect my ipad to Apple TV. Any thoughts?

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Google App, lost the ability to search the web using voice, any ideas?

I have Iphone 4 and upgraded to IOS6, in the Google App, I have lost the ability to search the web using voice, any ideas?

#30 - Deck recognition after Tiger Upgrade:
Shane's Stock Answer #30:
http://discussions.apple.com/thread.jspa?messageID=1063600&#1063600
The credit for this goes to Bob Sidebotham:
I was just walked through a repair procedure by an Apple Care person, and it fixed my camera recognition problems (I have a Canon XL1 and sometime after installing Tiger, then 10.4.1, various patches (including Quicktime 7.1) and the latest Desktop Video patch, I've been unable to use the camera with Final Cut Express, and attempts to capture would result in a FCE crash).
The workaround is to download Quicktime manually, after removing the "receipts" which indicate that it is loaded. Specifically, I was told to do the following:
1. Navigate to Library -> Receipts on your main drive (not from your personal folder).
2. Remove all files of the form QuickTime*.pkg, where "*" is a version number. E.g. QuickTime600.pkg, QuickTime650.pkg, Quicktime700.pkg and QuickTime701.pkg. This simply tells your system that those packages are not installed.
3. Go to http://www.apple.com/quicktime/downloads and click on the "download Quicktime" link. DO NOT USE THE AUTOMATIC UPDATE UTILITY. Download QuickTimeInstallerX.dmg. Double click this file (probably on your desktop) and then invoke the installer by double clicking QuickTime701.pkg.
4. After your computer reboots, you should be able to restart FCP and see your camera.
Shane

3.3mhz iMac, just had Maverick installed and as I tried to upload Pix, the finder went into a wheel of death and since that point, have lost the ability to even type on ANY applicat would not come out of it.. did utilities and have no idea what to do next

Have a iMac 3.3 mhz, tried to upload pix to an app and Finder went into the wheel of death and would not come out.. When it "Got Lost" I also lost the ability to even type on the machine in ANY APPLICATION. Have run utilities, made repairs and still no typing/text. On Thurs or Friday (10/24 or 10/25) Maverick was installed so this may be a problem that it created. As it happens I didn't ask for Maverick. How do I fix the "Finder" on the machine if i can't even type on it??

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

Lost the ability to connect to both WiFi and Bluetooth on my iPhone 4S. Any suggestions on how to fix this?

Lost the ability to connect to both WiFi and Bluetooth on my iPhone 4S. Any suggestions on how to fix the problem?

Have you followed http://support.apple.com/kb/TS1559 ?
Also try settings>general>reset>reset all settings
If you have followed that article and restored your phone and set it up as new and you're still having that issue you may call and explain you followed the article and are still having the problem. Most likely they will either set up a replacement for you. If they ask you to set up the one time phone support agreement, and they assist you with a restore again, they won't bill you if they end up having to repair it.

I just downloaded Photos and I have lost the ability to easily send photos by email via Outlook. Any suggestions?

I just downloaded Photos and I have lost the ability to easily send photos by email via Outlook. Any suggestions?

If you use Mac Mail and Microsoft Outlook mail like I do, you could switch from one to the other mail program for send photos.
iPhoto >> Preferences >> General tab >> E-mail foto's via >> select Microsoft Outlook.
Click a photo in iPhoto >> Share >> select E-mail … >> Microsoft Outlook will be launch.

I seem to have lost the ability to directly upload a song from Garageband to facebook or e-mail on both my iMac and Macbook. Any suggestions.

I seem to have lost the ability to directly upload a song from Garageband to facebook or e-mail on both my iMac and Macbook. Any suggestions?

Have you repaired permissions and restarted your computer after installing ML? Checked your printer settings in System Preferences?
If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
Read the various Knowledge Base ML printing articles. Here are a few to get you started:
OS X Mountain Lion: If the software for your printer can’t be found
OS X Mountain Lion: Troubleshoot a USB printer
OS X Mountain Lion: Troubleshoot an AirPort printer
If none of the above work, post back w/the model of your printer and how it's connected to your computer. USB? Wireless?

When I use FF 4 I have problem with my Intranet user interface, I lost the ability to acces my intranet database? So for now I go back to previous version. I hope that kind of problem can be fix soon.

I usually use FF 3.6 version to download data from my company intranet. With old FF version I can access the intranet easily. But when I upgrade to the FF 4, I lost the ability to customize the variable data I want to collect. It kind of stuck. Usually when I right click I have option what to do. with the new version my option is none. nothing change. It's frustrating. So now, I go back to previous version. You said previous version is vulnerable to phishing or virus or something but still it user friendly for me to access my company data. Please fix that bug and I'll upgrade to the newest version.

I want to add my progress about this problem. I find this problem in IE 9, but it has compatibility view, though not too perfect but quite helpful. Whereas FF 4, from article in support, said it doesn't have one. So, I beg you FF team to accommodate us who still deal with old web design so we still can use this FF 4. Please..please..please. I still believe Firefox is the best browser and I hope FF team also responsive about current problem. I think I don't have any option, but to downgrade FF to 3.6 until someone tell me how to deal with this kind of problem. Thanks.

Lost the ability to spell check on all applications

I recently updated my system to Mavericks 10.9.4, since then I have lost the ability for spell checking in all applications. Check spelling while I type is not working and I am unable to check spelling manually through the app menus. Skype, Facebook, Notepad.. you name it, spelling correction functionality is no bueno. Has anyone ever heard of this? I have tried changing languages, booting in safe mode... the only thing I did notice was that the box to check "correct spelling automatically" won't stay checked, but clearly something else is wrong.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

TS4268 Help! Probably you have never experienced this, but I have lost the ability to iMessage. When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage." It's not a huge deal, but people with iPhones can't t

Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...

Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...

Itunes seems to have lost the ability to play purchased video

Before posting here, I've searched all over the place for a solution to this problem, I found many people who have very similar issues, some solved them, but their solutions haven't worked for me, others with problems closer to how'd I'd describe mine have yet to find a solution
My problem is, when I try to watch purchased tv shows, the video playback is horribly choppy. Most of the time it's like watching a screenshot with audio. (audio plays fine). I've tried all the suggestions of disabling direct3d etc to no avail. I have a brand new pretty beefy system that should have no problems running the video at all. The oddest thing though, is that early today the video worked fine, which confirms that it's not hardware insufficiency. After downloading 2 shows this evening, I watched them with perfectly smooth playback. After getting a few more tv shows, itunes suddenly lost the ability to playback smoothly, even after closing, opening itunes again, rebooting my computer, none of it helped. The only thing left to try which I will try if nobody has any idea what the problem might be, is to completly uninstall itunes and try reinstalling it again, since earlier the playback was fine.
Has anyone else encountered anything at all like this? Nothing about my system has changed since earlier this evening, I already had the most recent version of itunes when everything was working fine. No display drivers or any of that has changed. It was only a matter of a few minutes between smooth playback and where my itunes perminatly lost the ability to playback video properly.
I appoligize for the long winded message but I wanted to cover all the bases so people don't end up suggesting stuff I've already tried. The only clue that might be related is during download of one of the shows Windows Vista popped up the message that itunes had stop working, and I could try and find a solution or close the application. I just closed itunes and opened it again. Everything seemed fine but it may be (not positive though) that it was immediatly after that that the video nolonger played properly.

Post in the iTunes Windows section. This is the iTunes Mac area.
Make sure that your Quicktime is up to date.
MJ

After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out. Also the scan function won't let me scan at any density greater than 150 dpi. I have talked to Applecare and to HP tech support and been told "too bad." Any help would be appreciated.

THANK YOU! And who are you? I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words. Many thanks! John

I seem to have lost the ability to close windows at the top of the screen. What do I click on to change the look of the tool bar.

I seem to have lost the ability to close a window at the top of the screen. I must have changed the tool bar in some way and I have no idea how to change it back. Any guidance?

Settings-general-show scrollbars-always.

Itunes seems to have lost the ability to play purchased videos

Before posting here, I've searched all over the place for a solution to this problem, I found many people who have very similar issues, some solved them, but their solutions haven't worked for me, others with problems closer to how'd I'd describe mine have yet to find a solution
My problem is, when I try to watch purchased tv shows, the video playback is horribly choppy. Most of the time it's like watching a screenshot with audio. (audio plays fine). I've tried all the suggestions of disabling direct3d etc to no avail. I have a brand new pretty beefy system that should have no problems running the video at all. The oddest thing though, is that early today the video worked fine, which confirms that it's not hardware insufficiency. After downloading 2 shows this evening, I watched them with perfectly smooth playback. After getting a few more tv shows, itunes suddenly lost the ability to playback smoothly, even after closing, opening itunes again, rebooting my computer, none of it helped. The only thing left to try which I will try if nobody has any idea what the problem might be, is to completly uninstall itunes and try reinstalling it again, since earlier the playback was fine.
Has anyone else encountered anything at all like this? Nothing about my system has changed since earlier this evening, I already had the most recent version of itunes when everything was working fine. No display drivers or any of that has changed. It was only a matter of a few minutes between smooth playback and where my itunes perminatly lost the ability to playback video properly.
I appoligize for the long winded message but I wanted to cover all the bases so people don't end up suggesting stuff I've already tried. The only clue that might be related is during download of one of the shows Windows Vista popped up the message that itunes had stop working, and I could try and find a solution or close the application. I just closed itunes and opened it again. Everything seemed fine but it may be (not positive though) that it was immediatly after that that the video nolonger played properly.

I'm going to take a wild guess and say that you have a SATA controlled hard drive. Apparently, there's some kind of bug with SATA disks and Vista and Quicktime/itunes video...and possibly Nvidia is involved as well.
The workaround is sticking the video on a flash drive in order to play it (because that avoids the SATA controller and thus bypasses the issue). It's a crappy workaround, IMO...and I'm not spending another cent on iTunes videos until the issue is actually fixed.

Lost the ability to browse any NAS or Servers

Similar Messages

Maybe you are looking for